Turbor
Legendary
Offline
Activity: 1022
Merit: 1000
BitMinter
|
|
December 14, 2012, 05:06:40 PM |
|
at least he came back and is talking. So many others just cut and run.
He owes me nothing. It's just my point of view. If I were in his shoes I would buy the coins, pay my depts and then ask people to come back. That's the honest way.
|
|
|
|
martychubbs (OP)
|
|
December 14, 2012, 05:20:12 PM |
|
at least he came back and is talking. So many others just cut and run.
He owes me nothing. It's just my point of view. If I were in his shoes I would buy the coins, pay my depts and then ask people to come back. That's the honest way. Then why the hell did I pay 111-120%? It's not charity! Risk was know by the miners... The tread is littered with late payments and grief...crappy website, too (not the graphs) It just might not be your cup of tea? PS, what's up with the Burka?
|
|
|
|
marks1976
|
|
December 15, 2012, 06:49:19 AM |
|
Actually the people have mined with you did not know the risks of you not paying. Nowhere did I read you may not be paid for your work. If that was the case I am sure there would have been far fewer people mining with you. Most people are in it for making money and more of it. After the payments got backed up by a week I stopped mining plus the lack of communication.
|
|
|
|
martychubbs (OP)
|
|
December 17, 2012, 10:36:42 PM Last edit: December 17, 2012, 10:55:29 PM by martychubbs |
|
Actually the people have mined with you did not know the risks of you not paying.
Risk of not paying, is not risk of late payments. I regret that regular payments and communication were lacking, however, your claiming I am not paying. Clipse did not pay... Pirate did not pay...A1 did not pay... Where have I said I am not paying? Please don't make accusation that are not true, however, I think you were referring to regular daily payments vs the chance they would take...weeks or months...I understand that... Please realize, I have taken steps to prevent the situation from recurring again. Payments have been regular for over 30 days and payments for the 20 day stretch go out almost daily...
|
|
|
|
crosby
|
|
December 18, 2012, 12:14:23 AM |
|
Marty,
FYI;
I've stopped mining with you as you have stopped paying me.
|
Get your BTC and LTC at www.betcoinpartners.com/c/2/374 with FREEROLLS + Daily & Weekly Bonuses + Satellites + ON DEMAND tournaments + Instant Deposit + Instant Withdrawals + RING games + GTD Tournament + On Demand Satellite, + LIVE DEALER CASINO + SPORTSBOOK + 100% WELCOME BONUS www.betcoinpartners.com/c/2/374 150 btc ($100,000) gtd monthly, 75 btc ($50,000) gtd weekly and 10 BIG daily gtd ranging 0.5 btc to up to 20 btc
|
|
|
HolyScott
|
|
December 18, 2012, 12:31:14 AM Last edit: September 27, 2017, 10:55:24 PM by HolyScott |
|
I just want to confirm I have been getting daily payouts for new hash for the last week or so I have returned mining. Do you give any priority in back pay to people who are sticking it out mining with you?
|
|
|
|
martychubbs (OP)
|
|
December 20, 2012, 07:27:33 PM Last edit: December 20, 2012, 08:39:50 PM by martychubbs |
|
I just want to confirm I have been getting daily payouts for new hash for the last week or so I have returned mining. Do you give any priority in back pay to people who are sticking it out mining with you?
Scott
I do for the day I am working on paying. However, I do not proceed to the next day until everyone is paid for that day. I will try and follow that as a slight incentive to return and help me pay faster. Thanks for hangin' in there! Marty,
FYI;
I've stopped mining with you as you have stopped paying me.
So your paid, right? I have paid up to 10/28, currently working on the 29th. Current miners are paid out daily and has been so for over a month (Saturdays are tough for me so I pull stats but my not get to payouts until later in the night...) www.projectxpps.comauth: u:wango p:tango
|
|
|
|
crk
|
|
December 27, 2012, 09:56:49 PM |
|
dude.. u still own me some coins from 2 months ago =/
|
|
|
|
martychubbs (OP)
|
|
January 01, 2013, 01:20:31 AM |
|
Happy New Year!
|
|
|
|
martychubbs (OP)
|
|
January 02, 2013, 04:59:08 PM |
|
110% today...
|
|
|
|
HolyScott
|
|
January 04, 2013, 10:00:05 PM |
|
Any news of a switch over for ASIC either GBT or Stratum? My only current complaint with pool is I am loosing about 5-10% in efficiently.
|
|
|
|
martychubbs (OP)
|
|
January 08, 2013, 03:53:42 PM Last edit: January 08, 2013, 05:47:08 PM by martychubbs |
|
What mining software are you using to connect? Where are you connecting from?
I use stratum proxy on the back end and I want to use stratum/GBT were I can. What we need is a stratum/GBT to getwork proxy. However, I might have some other ideas to improve efficiency once I know more on how you are connecting.
The stratum mining proxy is getwork to stratum proxy for what I was able to figure out how to configure. Haven't had time in the last few weeks to dig into it further, though.
Any ideas?
BTW, I use guiminer 2.19.12 and get 0 stales from the miner to the proxy.
Update: I'll make some changes in an hour, please let me know it you notice any increase/decrease in efficiency. Thanks!
|
|
|
|
HolyScott
|
|
January 09, 2013, 01:14:32 AM Last edit: September 27, 2017, 10:54:55 PM by HolyScott |
|
My Windows 8 Computers has 3x 6950's and should be getting about 15.5 U / Min and gets about 14.1
I have a Raspberry Pi running 4x BFL Bitforce Singles that should be getting a total of 45 - 46 U / Min and I am getting about 41 - 42.
Both systems are running BFGminer 2.10.2 with the linux RPi compiled myself. There is no way I would switch to GUIminer as I lose major hashrate. Deepbit / mtred / slush / eclipse / p2pool all show the higher stated efficiency. ISP is TWC Roadrunner Turbo. I am in New York if that helps.
|
|
|
|
martychubbs (OP)
|
|
January 09, 2013, 10:38:07 PM |
|
On the windows 8 box can you try guiminer 2192012? I have the same set up, however, it doesn't give the detail you get in BFGminer/CGminer. I somehow have had the highest hashrate and the most reliable connection using guiminer 2192012 w/OpenCL miner. So, maybe I am just blind to my efficiency loss. Also, I am a proxy that connects to different pools that are sometimes inefficient themselves. Your location shouldn't be a problem... I am going to see what I get w/BFGminer...
|
|
|
|
HolyScott
|
|
January 10, 2013, 12:19:31 AM Last edit: September 27, 2017, 10:54:40 PM by HolyScott |
|
If I am on a PPS pool I don't look at hashrate (well I do) but I pay attention to the U: The Utility defined as the number of shares / minute which is displayed in CG / BFGMiner so if I have a total of 60 U x 60 Minutes in an hour x 24 Hours a day = I should have 86400 shares a day. 86400 x 0.0000088435333122 which is your PPS rate. So I should be making about .76 BTC a day. You should see from your recent payouts to me I am not quite hitting that number I would be happy to be making .75 BTC a day, and I am getting more .60 - .70 which is hurting the pockets.
I did try out the newest GUIMiner, and with the flags -v -w 128 I can get close to my hashrate, however I could never give up bfgminer, as it handles the overclocking, the cooling fans, the fallback for down pools, and so much more detailed information. My efficiently problem from you is that I get a Pool 0 is not providing work fast enough ever 5 seconds or so. Which is ALOT. I know I am losing about $1.00 USD a day / $30 a month with you. But I am trying to help you out get some of your back paid people paid up. I have 3x 6950's in 1 computer, what is your exact setup and I can help you with bfgminer, cause I think you can do much better then guiminer. However, I admit I know nothing about proxies or how you could switch over to GBT or Stratum.
|
|
|
|
martychubbs (OP)
|
|
January 11, 2013, 12:11:51 AM Last edit: January 11, 2013, 06:24:34 AM by martychubbs |
|
With BFGminer, try adding these options: --no-longpoll --no-stratum --no-gbt --failover-only and see if it clears anything up?
Maybe, use --net-delay to isolate a slow router on either side...i dunno but it may help
--failover-only helped in a recent case.
I tried BFGminer yesterday and still had better results with GUIminer 02192012, but with the help of HS, I tried the options above and now I prefer it to GUIminer. Thanks HS
Also, I am happy to help anyone set up a proxy on their network to connect to my proxy. The advantage being a tool for you to see your aggregate stats locally in your browser as well as miner stats.
|
|
|
|
martychubbs (OP)
|
|
January 11, 2013, 06:26:14 AM Last edit: January 11, 2013, 07:17:33 AM by martychubbs |
|
If you want to try a proxy for windows with default settings to connect to projectxpps.com:8999, download this and look at this for set up instructions. Update: Hashrate graphs back up...looking awesome!
|
|
|
|
martychubbs (OP)
|
|
January 11, 2013, 08:05:55 PM |
|
Going to try 112.5% payout for a bit, hopin' for more miners....
|
|
|
|
JWU42
Legendary
Offline
Activity: 1666
Merit: 1000
|
|
January 13, 2013, 03:51:58 PM |
|
Out for a test run now - seems the stats are not live? Looks like a google doc updated daily?
|
|
|
|
JWU42
Legendary
Offline
Activity: 1666
Merit: 1000
|
|
January 13, 2013, 05:30:02 PM |
|
Test failed... Came back after letting it run an hour or so and see most every unit on a minirig effectively idle - like 150 Mh/s each. Avg speed went from 25 Gh/s now at 22 Gh/s EPIC FAIL!
|
|
|
|
|