Antek
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 20, 2016, 02:19:42 PM |
|
What kind of return could I expect from it ? Is it really worth to use it compared to bitfinex platform only ?
I don't know how about BitFinex, but i'm using self-written bot for Poloniex and it is 1.5-5x more profitable. But on poloniex loan rate can change between 0.03% and 0.25%, so automatic system is much more critical. Would you mind to share some information about your Lending Bot? Regards Andreas
|
|
|
|
jabetizo
|
|
May 18, 2016, 02:28:15 PM |
|
Is there any bot that supports ETH?
|
|
|
|
dehhh
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 30, 2016, 07:31:24 AM |
|
Awesome project, I was looking exactly for this! Thanks a lot for creating it!
I have no experience with php, nor setting up a server for this purpose. Can someone give me a quick help installing marginbot? I saw some people mentioning 000webhost.com. I tried it but got stuck, couldn't figure out how to upload files and setup what I needed (kept getting an ftp error). If you have other suggestions of low-cost web servers to host it, I'm also up for it.
Best, Andre
|
|
|
|
crazyivan
Legendary
Offline
Activity: 1652
Merit: 1007
DMD Diamond Making Money 4+ years! Join us!
|
|
May 30, 2016, 01:04:29 PM |
|
Is this Bitfinex lending profitable at all anymore? I see Polo,which s offered higher lending rates in the last 6 months, hasnt been profitable anymore.
So, is there any point using this?
|
|
|
|
dehhh
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 30, 2016, 04:39:24 PM |
|
Is this Bitfinex lending profitable at all anymore? I see Polo,which s offered higher lending rates in the last 6 months, hasnt been profitable anymore.
So, is there any point using this?
When you say profitable, what exactly do you mean? I ask that because if you plan to only lend USD, I don't see many ways in which you lose money in this investment (except for credit risk and failure to repay the loan by the exchange). On top of that, lending rates are higher than a lot of other fixed-rate investments in USD. So as long as you're comfortable with the credit risk, I believe it is still worth it.
|
|
|
|
anyone22
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 18, 2016, 12:36:53 AM |
|
Good job HowardF, thanks for this amazing tool.
However, I'm having some difficulties, so if anyone can help, I would appreciate.
I was able to make the bot work for a couple of days. (Running on a VM) Earlier today, I had to shutdown all my systems for some maintenance. Now when I turn everything on back again, (the VM included, of course) I can't connect to the web interface anymore, it show me like it were down.
I'm not sure if I should run a script to make it work, or start a service. I'm using Ubuntu 14.04, apache and mysql are running ok, all the cron jobs were running too.
I'm pretty sure that is something very obvious, or basic. The problem is that everything I know from I.T, I learned from curiosity, never had any formal lesson. So my knowledge on Linux/Apache/Mysql is very limited.
Thank you for the attention.
|
|
|
|
Sukrim
Legendary
Offline
Activity: 2618
Merit: 1006
|
|
June 18, 2016, 10:44:20 AM |
|
Since you were already able to make it work once, just start with a fresh VM and from scratch, if it is only a hobby project?
A possible issue could be that the clock in your VM is off, read up on "NTP" how to fix that.
|
|
|
|
anyone22
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 19, 2016, 07:09:04 PM |
|
Since you were already able to make it work once, just start with a fresh VM and from scratch, if it is only a hobby project?
A possible issue could be that the clock in your VM is off, read up on "NTP" how to fix that.
I could start a fresh VM, but then I would have to do that everytime I shutdown the system, assuming that's not how it supposed to work. I didn't checked the clock yet, will do it tomorrow and return here. However I don't think that is the issue. I just checked my account and the bot is continously lending funds, if the BOT is doing his job the only problem is the web interface which doesn't work after the shutdown. Considering that no changes were made into the system, and it worked the first time, I'm still assuming that a service should be running, but it didn't autostart in boot. Thank you for the attention.
|
|
|
|
aidan258
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 23, 2016, 12:09:37 AM |
|
I have been trying to set this up and its been having some issues. Does anyone know if this is still working/updated?
If not does anyone have a good suggestion for an alternative?
|
|
|
|
chadwickx16
|
|
July 23, 2016, 01:02:02 AM |
|
I have been trying to set this up and its been having some issues. Does anyone know if this is still working/updated?
If not does anyone have a good suggestion for an alternative?
Should still be working, although I had issues setting it up on a website initially. So I just set it up on a RasbPi LAMP server I had laying around.
|
|
|
|
aidan258
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 23, 2016, 07:37:58 AM |
|
I have been trying to set this up and its been having some issues. Does anyone know if this is still working/updated?
If not does anyone have a good suggestion for an alternative?
Should still be working, although I had issues setting it up on a website initially. So I just set it up on a RasbPi LAMP server I had laying around. Hey, Since you mentioned that the Margin Bot is still working I was wondering if you had any advice for me. I have tried installing the bot twice first on a Centos Vps and then again on shared hosting through godaddy. Both times I made sure short tags were enabled and that the server/shared hosting had php 5.3+ and I double checked that curl was enabled and working. + I made sure to 777 chmod the config file. I would then run into the same problem on both setups. After the second page of the install where you click something like "finish install" I would click it and it would basically just refresh the page and stay on the second page of the install process. After that I would go to the index and try to login and my login would not work. So I checked the mysql db and the tables were created for users ect... but they were left completely blank leading me to believe there is some kind of problem with the connection to the mysql database. If you have any advice or suggestions it would be greatly appreciated I have been trying to fix this for two days now.
|
|
|
|
aidan258
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 24, 2016, 01:00:39 AM |
|
So I finally managed to get the install.php to run correctly. However I am now having issues with the bot itself. http://puu.sh/qccTS/31f7c4f2a8.pngIt is displaying that I have $0 available balance, and Deposit even though there are available funds. If I manually place an offer to lend out http://puu.sh/qcd6D/888db76a26.pngIt will show up in the loans pending. But the second the cron job runs it will cancel the offer. And just put all the funds back into available without putting in anymore offers to lend the funds out. Has anyone else had this problem? Or have any suggestions how to fix it?
|
|
|
|
chadwickx16
|
|
July 24, 2016, 01:04:52 AM |
|
So I finally managed to get the install.php to run correctly. However I am now having issues with the bot itself. It is displaying that I have $0 available balance, and Deposit even though there are available funds. If I manually place an offer to lend out It will show up in the loans pending. But the second the cron job runs it will cancel the offer. And just put all the funds back into available. Has anyone else had this problem? Or have any suggestions how to fix it? Glad you got it working! Does your API code have the correct API authorizations for the bot? That's really all I can think of...
|
|
|
|
aidan258
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 24, 2016, 01:08:37 AM |
|
So I finally managed to get the install.php to run correctly. However I am now having issues with the bot itself. http://puu.sh/qccTS/31f7c4f2a8.pngIt is displaying that I have $0 available balance, and Deposit even though there are available funds. If I manually place an offer to lend out http://puu.sh/qcd6D/888db76a26.pngIt will show up in the loans pending. But the second the cron job runs it will cancel the offer. And just put all the funds back into available. Has anyone else had this problem? Or have any suggestions how to fix it? Glad you got it working! Does your API code have the correct API authorizations for the bot? That's really all I can think of... I only gave the api key access to read and write for Margin Funding. Do I need to give it more access? I wish it was that simple but seeing as it can cancel my offers I would assume that's not the problem. Which fork/version are you using?
|
|
|
|
chadwickx16
|
|
July 24, 2016, 01:16:35 AM |
|
So I finally managed to get the install.php to run correctly. However I am now having issues with the bot itself. It is displaying that I have $0 available balance, and Deposit even though there are available funds. If I manually place an offer to lend out It will show up in the loans pending. But the second the cron job runs it will cancel the offer. And just put all the funds back into available. Has anyone else had this problem? Or have any suggestions how to fix it? Glad you got it working! Does your API code have the correct API authorizations for the bot? That's really all I can think of... I only gave the api key access to read and write for Margin Funding. Do I need to give it more access? I wish it was that simple but seeing as it can cancel my offers I would assume that's not the problem. Which fork/version are you using? I'm using this one: https://github.com/deponzit/MarginBot
|
|
|
|
aidan258
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 24, 2016, 09:00:44 PM |
|
So I finally managed to get the install.php to run correctly. However I am now having issues with the bot itself. http://puu.sh/qccTS/31f7c4f2a8.pngIt is displaying that I have $0 available balance, and Deposit even though there are available funds. If I manually place an offer to lend out http://puu.sh/qcd6D/888db76a26.pngIt will show up in the loans pending. But the second the cron job runs it will cancel the offer. And just put all the funds back into available. Has anyone else had this problem? Or have any suggestions how to fix it? Glad you got it working! Does your API code have the correct API authorizations for the bot? That's really all I can think of... I only gave the api key access to read and write for Margin Funding. Do I need to give it more access? I wish it was that simple but seeing as it can cancel my offers I would assume that's not the problem. Which fork/version are you using? I'm using this one: https://github.com/deponzit/MarginBotFinally got it working. You were right it was a problem with the API access. To fix it I simply gave it read access to everything, and write access to margin funding only for security purposes. Now it seems to be running well. The only issue left is that the website still shows me "It appears the hourly cron hasn't been running. The last time it ran was 1:00:03 pm, July 24th, 2016. Check to make sure your cronjob contains a job similar to: ect..." for both cron jobs. Even though it updates the time and they are 100% running. Whatever that's simply cosmetic.
|
|
|
|
kellogsblocks
Member
Offline
Activity: 77
Merit: 10
|
|
December 11, 2016, 04:28:03 PM |
|
Hello everyone, thank you very much for this piece of software. I want to use it, cause I wanna split my lending positions half and half between poloniex and bitfinex. When I get it up and running, expect my earnings from the first month as donation. I think I am just one step away from a proper setup. My cron jobs are scheduled and I executed them manually too. But there is always the message "It appears you have not set up the 10 minute cron, or it hasn't been running." The hourly job seems to be fine. When I run the TenMinuteCron.php directly in a browser I get the following message: THERE HAS BEEN A DATABASE ERROR Please Contact Support If this error persists. 1055 - Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'database name.BFXLendBot_CronRuns.lastrun' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
I granted read access for everything and write access for funding to the API. I'm able to set funding offers manually via website. My deposited BTC amount is not much right now, but enough for testing. Could anyone help me out? Am running Ubuntu 16.04 with the current MySQL, Apache, PHP from sources. Thank you very much
|
|
|
|
kellogsblocks
Member
Offline
Activity: 77
Merit: 10
|
|
December 11, 2016, 04:56:00 PM Last edit: December 11, 2016, 05:15:06 PM by kellogsblocks |
|
Okay, solved it. Had to add [mysqld] sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION"
to my.cnf ... but offers are still not made..
|
|
|
|
Jope
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 17, 2017, 04:30:34 AM |
|
Evening gents, Just wondering, I got an email from Bitfinex today stating that they will be updating their API on Jan 18. I've been running MarginBot for 1 full year now, flawlessly. Will this API update break MarginBot? I'm not very proficient in the ways of the code.
Much thanks for any replies.
|
|
|
|
TOMOAKI12345
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 19, 2017, 08:47:04 AM |
|
cool !
|
|
|
|
|