Upgrading from MSI 890FXA-GD70

[Gomeler]

If you are just using it for mining then there's no point in throwing a Bulldozer in that board. Regardless it should work and I've got 5 cards running in a pair of these boards. Been working error free for about 2 months.

[1715051377]

1715051377

[AndrewBUD]

I use the Athlon x2 250 cpu for the rigs.. They work great... @ home 1090T for now.. until I see some decent spec's on the new Bulldozer style architecture...

[Ausversucht]

I would recommend the GIGABYTE GA-990FXA-UD3 for your purposes, it has the same layout for pci-e except one of the 16x slots is replaced with a 1x slot, obviously shouldn't be a problem if you are running 6 cards since you are definitely using some extenders already.  It is $30 cheaper than the UD5 and I like the pci-e layout better.  It also has support for the FX processors.

[flatronw]

I would recommend the GIGABYTE GA-990FXA-UD3 for your purposes, it has the same layout for pci-e except one of the 16x slots is replaced with a 1x slot, obviously shouldn't be a problem if you are running 6 cards since you are definitely using some extenders already.  It is $30 cheaper than the UD5 and I like the pci-e layout better.  It also has support for the FX processors.

Are you actually personally currently running 6 cards on a GIGABYTE GA-990FXA-UD3  ??

[senseless]

I use the Athlon x2 250 cpu for the rigs.. They work great... @ home 1090T for now.. until I see some decent spec's on the new Bulldozer style architecture...

How are you doing that? I'm using an x2 250 and it maxes 100% cpu with only 3 cards. With 4 cards the rates go down considerably from what they should be. That cpu can barely support 3 cards, and definitely not 4. I'm upgrading to an FX-8120.

[AndrewBUD]

Why is your CPU being used at all ?



using cgminer there is very little, to no cpu usage.....

[crazyates]

I use the Athlon x2 250 cpu for the rigs.. They work great... @ home 1090T for now.. until I see some decent spec's on the new Bulldozer style architecture...

How are you doing that? I'm using an x2 250 and it maxes 100% cpu with only 3 cards. With 4 cards the rates go down considerably from what they should be. That cpu can barely support 3 cards, and definitely not 4. I'm upgrading to an FX-8120.

What driver/SDK? Unless you're over I:9, CGMiner usus almost no CPU?

[fcmatt]

besides mining bitcoin using amd cheapo cpu on gd70 board.. i am done investing money in amd
compat motherboards. intel all the way.

and i was a long time amd cpu user. bought my first intel this year when i ran amd for what seems like the
last decade.

[senseless]

I found the issue, was a bug in my miner. Moved to an older version, problem went away. Doh.

All of the latest miners use 100% cpu, seems like some sort of bug in the engine or mining code. If I swap to slightly older versions the usage drops to < 2%. Any idea what might be going on there? I'm running the latest drivers as of today.

For aggression/intensity, I"m using 14 under BFGMiner, and 12 aggression on phoenix.

[crazyates]

I found the issue, was a bug in my miner. Moved to an older version, problem went away. Doh.

All of the latest miners use 100% cpu, seems like some sort of bug in the engine or mining code. If I swap to slightly older versions the usage drops to < 2%. Any idea what might be going on there? I'm running the latest drivers as of today.

For aggression/intensity, I"m using 14 under BFGMiner, and 12 aggression on phoenix.

I think the newer drivers introduced the 100% cpu bug, but only at high aggression/intensity. For me (driver 12., I:9 is good, but I:10 or higher isn't.

[fcmatt]

set affinity for all miner processes to 1 cpu core.
then save other core(s) to run the OS and feed the gpus

[AndrewBUD]

intensity depends on if the GPU is being used.... I have a few cards in my @home rig and the Desktop card uses I:6 and the others use I:9...