Pebblecoin (XPB) - FIRST DPOS CRYPTONOTE COIN LIVE - Qt Wallet GUI - v0.4.4.1

[kahir]

okay i got my wallet to work after 1 hour of trying those codes ...

also i like the intensive memory usage

[1715493980]

1715493980

[1715493980]

1715493980

[z38630610]

how to work for windows7 64bit ,dev




dev why ?help no link

[PeaMine]

15-Jan-01 08:32:33.343682 Error: refresh failed: no connection to daemon. Please, make sure daemon is running. Blocks received: 0
Error: refresh failed: no connection to daemon. Please, make sure daemon is running. Blocks received: 0

daemon is running and synced, but mining, can wallet not connect?

[bathrobehero]

What you mentioned is exactly the problem with *all* current cryptonote coins, and the reason why despite it being superior technology nobody uses it and exactly what I intend to change with XPB.  Adding a GUI is the first in very many steps to a cryptonote coin more usable and more widespread.

How could it be more widespread when it starts with a poor distribution method? I'm not saying the memory requirements are bad but no GUI is going to help distribution when the vast majority of users can't even participate in the distribution. The point of good coin distribution is to hit as many people as possible and you act like this coin have a good distribution method when in fact it is quite the opposite.

Sure, you can market it and add utility to the coin later down the line but that will be offset by the fact that all the coins will belong to a few individuals.

[Shadow_Runner]

Why cryptonote coins so unstable? And when it get GUI at least?

[YesOrNo]

Hello world
Is it really safe. Virustotal 3/52

https://www.virustotal.com/pl/file/eca44bd3653947f277d10ac578c5d2d91ddef9adb2c17b173224a8d85f88983d/analysis/1420113937/

[XPB]

Why cryptonote coins so unstable? And when it get GUI at least?

GUI by 18 Jan, still testing.  Will be the first cryptonote coin with a proper GUI.

[MisO69]

Anyone get simplewallet to work on Win64?

I get this after issuing the command as instructed. Using both the devs and Vorksholk's code.. The daemon syncs up fine.

pebblecoin wallet v0.1.0.4()
2015-Jan-01 12:15:12.016115 Genesis block nonce is: 1593709698
2015-Jan-01 12:15:12.016115 Provided incorrect block id hash hex. Given 80e28ab8
2d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff, but block hashed to 3f
411af6c3e3add0d8ceb5ce28e8c69673941c7a4be9b3224514bf0c8c07d706

[Vorksholk]

Anyone get simplewallet to work on Win64?

I get this after issuing the command as instructed. Using both the devs and Vorksholk's code.. The daemon syncs up fine.

pebblecoin wallet v0.1.0.4()
2015-Jan-01 12:15:12.016115 Genesis block nonce is: 1593709698
2015-Jan-01 12:15:12.016115 Provided incorrect block id hash hex. Given 80e28ab8
2d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff, but block hashed to 3f
411af6c3e3add0d8ceb5ce28e8c69673941c7a4be9b3224514bf0c8c07d706

Try creating a new wallet, I had the same problem when I was trying to use a wallet that I generated with the wrong genesis information.

[XPB]

i got few blocks before noticing the mistake in OP
but probably not valid because used address generated by the wrong simplewallet command.. ?
it is possible to still use it ? can export private key and use in new wallet?

If you were mining on the wrong fork, it won't work on the current chain.  This is precisely why the rewards at launch start so low, 0.1% of what they will be in three weeks.  Thank you Vorksholk for correcting that.

i wasn't mining on wrong fork (.conf file was correct), just generated wallet using wrong genesis block data
i can see the very low block reward... so maybe instamine not that bad

In Cryptonote, the wallet is actually two files.  Say the wallet is called "mywallet", it will generate a file "mywallet.keys" and another file "mywallet".  The "mywallet" file is just a cache, if you delete this file (but not the keys file) and re-open the wallet it will reindex and you should be able to access your coins.

[XPB]

help please i can't get wallet sync/work and mining enable

2015-Jan-01 09:54:11.471827 pebblecoin wallet v0.1.0.4()
2015-Jan-01 09:54:11.473827 Must provide genesis nonce string

Run simplewallet like in the first post:

Code:

simplewallet --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 9883.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da7 2 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600235a7417f01

On Windows you can copy this, then right-click on the command prompt and click "Paste".

[XPB]

how to work for windows7 64bit ,dev

You have to give either config file or the command line options like Vorksholk said. Try running it like this:

Code:

pebblecoind --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 9883.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da72 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600235a7417f01

You have to wait for the daemon to finish synchronizing first

How did you run the daemon?  Try it like I wrote above

[bitcoin1992]

could anyone tell me how to solo?

Sure can.

Download pebblecoind and simplewallet from the dropbox links above.

Assuming you are on a Linux box, you are going to want to run simplewallet first to get an address:
(And remember, if you are on a headless box, you might consider running this stuff in screen sessions in case your SSH connection dies)

Code:

chmod a+x simplewallet
./simplewallet --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 9883.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da72 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600235a7417f01

Now, enter a passphrase, and copy that wallet address shown.

Now you are going to want to run pebblecoind to let it sync with the network. This is the daemon application, it handles all the heavy-lifting of the network, including mining.

Here's how you do that:

Code:

chmod a+x pebblecoind

Then create a config folder, let's call it ~/pebblecoin_data
Then create a file inside of that folder, called pebblecoin.conf with the following contents:

Code:

#genesis-nonce-string=31/Dec/2014 OPEN NASDAQ 4790.53 DAX 9883.10 DOW 17987.66
#genesis-timestamp=1420044761
#genesis-coinbase-hex=010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da72
#genesis-id-hash-hex=80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff
#genesis-work-hash-hex=9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf
#genesis-work-hash-signature-hex=9578dd84ed25b51fcde0b87505cf94ebf2b4e4ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600235a7417f01

##seed nodes
add-peer=69.60.113.23:6180
add-peer=69.60.113.24:6180
add-peer=69.60.113.25:6180
add-peer=69.60.112.164:6180
add-peer=69.60.112.169:6180

##uncomment to start mining, replace address with your wallet address
enable-boulderhash=1
start-mining=[b]ENTERYOURADDRESSHERE[/b] (What you copied when you ran simplewallet)
mining-threads=1

##uncomment to verify proof of work hashes yourself, enable-boulderhash must be on:
disable-signed-hashes=1

(Make sure you have 13GB of available RAM). If you have more than 13GB, you can set the mining-threads=# to a higher number. For example, to use 26GB of RAM, set it to 2. Not sure if there is any performance increase from running multiple threads, as one mining thread seems to utilize all cores near 100%, however I set mine as high as possible just in case.

Now, you are going to want to run the daemon. Since you have the genesis block data in your conf file, you shouldn't need the command line arguments. However, we can supply them to be safe:

Code:

./pebblecoind --data-dir ~/pebblecoin_data/ --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 9883.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da72 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600235a7417f01

Mining should start automatically, but you can check htop to make sure it is mining. The above config file will force your client to verify each block, but that seemed to work well for me. If it is too slow, you can comment the line disable-signed-hashes=1 in your config file, and relaunch the daemon.

From here, you can interface directly with the wallet. Type refresh to see if you got any coins. Mined blocks will show up in the daemon like so:

Code:

2015-Jan-01 06:40:03.780106 [miner 4]Found block for difficulty: 391
Hash was: <40630dcba9fc8ec911b10b2b945aee1e2ef9f02a89051e360010151df5602100>

However the refresh command will tell you how many coins you got for that block.

thank you guy !

[najzenmajsen]

you should get a designer for the coin first of all

[PeaMine]

2015-Jan-01 23:48:43.717792 pebblecoin wallet v0.1.0.4()
2015-Jan-01 23:48:43.718074 Genesis block nonce is: 1593709698
2015-Jan-01 23:48:47.681830 Genesis block nonce is: 1593709698
2015-Jan-01 23:48:47.982445 Loaded wallet keys file, with public address: (my address)
2015-Jan-01 23:48:47.982945 ERROR ../../src/common/boost_serialization_helper.h:82 Exception at [unserialize_obj_from_file], what=invalid signature
2015-Jan-01 23:48:47.983010 ERROR ../../src/wallet/wallet2.cpp:535 !r. THROW EXCEPTION: error::file_read_error
2015-Jan-01 23:48:47.983068 ../../src/wallet/wallet2.cpp:535:N5tools5error15file_error_baseILi2EEE: failed to read file "wallet.bin"
2015-Jan-01 23:48:47.983165 Error: failed to load wallet: failed to read file "wallet.bin"
2015-Jan-01 23:48:47.983286 ERROR ../../src/simplewallet/simplewallet.cpp:306 could not open account
2015-Jan-01 23:48:47.983345 ERROR ../../src/simplewallet/simplewallet.cpp:1060 Failed to initialize wallet





using:

~/pebblecoin/build/release/src$ ./simplewallet --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 98 83.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da7 2 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4                                                ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600 235a7417f01

[CryptoTrout]

needs logo

[XPB]

2015-Jan-01 23:48:43.717792 pebblecoin wallet v0.1.0.4()
2015-Jan-01 23:48:43.718074 Genesis block nonce is: 1593709698
2015-Jan-01 23:48:47.681830 Genesis block nonce is: 1593709698
2015-Jan-01 23:48:47.982445 Loaded wallet keys file, with public address: (my address)
2015-Jan-01 23:48:47.982945 ERROR ../../src/common/boost_serialization_helper.h:82 Exception at [unserialize_obj_from_file], what=invalid signature
2015-Jan-01 23:48:47.983010 ERROR ../../src/wallet/wallet2.cpp:535 !r. THROW EXCEPTION: error::file_read_error
2015-Jan-01 23:48:47.983068 ../../src/wallet/wallet2.cpp:535:N5tools5error15file_error_baseILi2EEE: failed to read file "wallet.bin"
2015-Jan-01 23:48:47.983165 Error: failed to load wallet: failed to read file "wallet.bin"
2015-Jan-01 23:48:47.983286 ERROR ../../src/simplewallet/simplewallet.cpp:306 could not open account
2015-Jan-01 23:48:47.983345 ERROR ../../src/simplewallet/simplewallet.cpp:1060 Failed to initialize wallet





using:

~/pebblecoin/build/release/src$ ./simplewallet --genesis-nonce-string "31/Dec/2014 OPEN NASDAQ 4790.53 DAX 98 83.10 DOW 17987.66" --genesis-timestamp 1420044761 --genesis-coinbase-hex 010a01ff0000210179e231c0574796ecc198e05afaecd3aea2d9a84fa6c51088eb75130c4eb4da7 2 --genesis-id-hash-hex 80e28ab82d17e61319309c7525d2f76a78731d0c6099b646bce2948d670181ff --genesis-work-hash-hex 9edc9d0ddd03c534300c9f4647a21998af9c0a4cdb9786c9f9b1f10095f5bacf --genesis-work-hash-signature 9578dd84ed25b51fcde0b87505cf94ebf2b4e4                                                ed5fc28c1a05650a06b80bde040cfaf44a7f32ef415f1e8bd016ce012fb44f5bc1e3aa3f5f41600 235a7417f01

That is strange.  Was that from the first time running the wallet?  Can you try deleting the "wallet" or "wallet.bin" files (but not the "wallet.keys" file) and running it again?

[PeaMine]

I remade it, I probably did something wrong with the hashes or something.
Probably only 1 or 2 coins on it as the reward was/is low per block.
I do like the 11GB RAM requirement, not even my gaming rig has that, but some old xeon servers do

[doitASAP]

really a bad idea to release such a stupid wallet 

[Lucky - Luciano]

really a bad idea to release such a stupid wallet 

     I agree. I do not understand the instructions. I have no idea what to do with codes and where to I enter commands. He  should set up video instruction on You Tube . Instruction are many complicated. Too bad, I have 3 PCs with lots of RAM memory.