Does anyone know if its possible to change the output voltage on this 2880 psu? What about the bitmains 1600 can you change the output voltage on that PS
I believe there is a write-up about upping the voltage on Bitmain's 1600W somewhere. As far as I know, voltage control is not possible with the 2880W PSU's, however the dual DPS-2000 that J4bberwock has developed and I should be producing this week will have voltage control as an option.
if you open bitmaintech's psu it has an internal pot that cranks up to about 12.6 I just read a review with photos of the pot.
The bitmain psu has shitty pcie cables. and cost over 165 shipped to the usa.
finksy + j4bberwock can supply 15 gauge beast cables this will help over clock and if you have 2 avalon 6's like I do ite becomes more important since the avalon use only 4 jacks.
@ finksy I sent a pm on ordering the 15 gauge cables.
j4bberrwock sent me a breakout baord and i have 2 2000 watt psu's from ebay coming.
I will need the 15 gauge cables I want to do a series of tests and photos that show how well they work for avalon 6's and I held onto my best s-7 I want to show how the better cables allow higher clocks.