generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
March 29, 2016, 12:55:09 AM |
|
So all your video cards are 6 pin? None of them have 8 pin?
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
March 29, 2016, 01:22:54 AM |
|
So all your video cards are 6 pin? None of them have 8 pin? I can't speak in regards to his video cards, but the only difference between 8 and 6 pin cables is that 8-pin have 2 extra ground circuits. They can't effectively carry any more load given the same gauge wiring than 6-pin cables. The reason they created 8 pin vs 6 pin was for standardization, 6-pin PCIe cables were only originally rated for 75W, the 8-pin cables have wiring rated for 150W. The 16awg 6-pin cables I personally carry are rated for well over 250W. So, you can get away with just grounding the 2 extra pins when powering GPU's with sufficient awg 6-pin cables like mine.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
March 29, 2016, 01:43:44 AM |
|
Good to know. Thanks for the info Finsky.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
chikenfeed
Newbie
Offline
Activity: 32
Merit: 0
|
|
April 12, 2016, 04:45:12 AM |
|
Too bad these are 220W. You can use the dryer outlet or the stove outlet if you are not using those currently. 110V-120V is just not enough to run large PSU's, the required amperage would be crazy. how much power does the antminer s7 board give out for fans can it handle the delta fans voltage : 12V Current : 3.9A Power : 46.8W i want to try the delta TFC1212DE is it a bad idea?
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
April 13, 2016, 02:34:54 AM |
|
Too bad these are 220W. You can use the dryer outlet or the stove outlet if you are not using those currently. 110V-120V is just not enough to run large PSU's, the required amperage would be crazy. how much power does the antminer s7 board give out for fans can it handle the delta fans voltage : 12V Current : 3.9A Power : 46.8W i want to try the delta TFC1212DE is it a bad idea? The S7 will have no problem powering that fan from the controller board, that is a similar fan to what they come shipped with.
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
April 15, 2016, 08:06:57 PM |
|
24" PCIe cables back in stock, packages are all up for sale.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3444
Merit: 1060
|
|
April 18, 2016, 06:28:32 AM |
|
So I had to post up here and brag on Finksy. Even after offering bounties (which I still have to pay and will) by FAR he was the most helpful in getting me up and running using just the server PSU's for GPU mining. They are loud but I have FAR less trouble out of them than consumer PSU's. Also if you want to make them quieter it's pretty easy to build a box with mattress padding to cover the front (leaving the back open and not suffocating the fans). After making my own wiring harnesses it runs like a charm, they stay cool and the 12v wires are extremely substantial (I'm delivering 200w per wire and running 2400 to 2600w per PSU). You won't regret dealing with this guy. what wire did you use to extend your GPU power cables? i guess it is modded using stranded wire?
|
|
|
|
natew
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 28, 2016, 12:34:47 AM |
|
Sent pm
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
April 28, 2016, 04:48:49 PM |
|
Replied.
I currently do not carry 6+2 pin PCIe cables, however I am currently exploring some cheap & easy solutions to add the extra 2 ground pins.
|
|
|
|
Oldpoison
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 02, 2016, 06:12:27 PM |
|
Finksy Hi how are you... Joan and Ivan from venezuelan told me about you, that you sell many diferent models of breakboards... i am looking for the HP 1300 Breakboard... that it have 8 pci-e Ports... with they cables... May I ask if you have Stock ? could you please contact to me by Private Massage to talk... thanks so much...!
|
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
May 09, 2016, 08:16:48 PM |
|
Bump, packages in stock and ready to ship!
|
|
|
|
bronxnua
Member
Offline
Activity: 92
Merit: 10
|
|
May 23, 2016, 12:58:41 PM |
|
I've got 3 new 220v 30a lines being installed today. Might have to look at trying one or three out when you solve the fan noise issue.
Currently working on it. http://imgur.com/a/VrL81#0good idea - the only reason the fans were on the end was to address space requirements. and you can get your dremel took out and cut the end off also. nice where did you get the fan.. did you make it with that connector? is that enough to cool it down?
|
|
|
|
dance191
|
|
May 26, 2016, 01:01:56 AM |
|
I gotta say Finksy really comes through. I put in a few orders and he made everything happen ASAP. All of the boards are top notch and everything is perfect. Thanks Finksy!!!
|
|
|
|
crowetic
Legendary
Offline
Activity: 2282
Merit: 1072
https://crowetic.com | https://qortal.org
|
|
May 26, 2016, 02:12:33 AM |
|
Do you make custom breakout boards, and/or setup my backplanes if I were to ship them to you? I've got a bunch of DPS 1200FB psu's and the backplanes that hold 4 of them, but I'm not certain on the wiring... Would be nice if someone professional such as yourself would be able to wire them up for me?
|
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▒▒▒▒▒ ▓▓▓▓▓▓▒ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒ ▓▓▓▓▓▓▒ ▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▒ ▒▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓
| ORTAL
| .⊙.Web and Application hosting. ⊙ decentralized infrastructure .⊙.leveling and voting.
| Founder/current dev group facilitator |
[/td][/tr][/table] [/table]
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
June 10, 2016, 06:34:16 PM |
|
Bump! Many packages ready to ship now, have power ready for your S9! @dance191 thank you for the kind words. I do my best @ crowetic Sorry I do not make any custom boards, all my boards were developed by J4bberwock I simply build them and sell them for North America. It won't be worth your time to ship PSU's to me to custom wire and ship back to you, you'd be better off finding someone local, do it yourself or source something different unfortunately. If you're keen to try doing it yourself, the RC forums are a gold mine for how-to's and pinouts for server PSU's, I'm sure you'd find one for the DPS 1200FB. I will warn you though, I'm not sure excatly why, but I had a large batch of DPS 1200 FBA psu's that I had bought and wired up myself to sell with some S5's, and for whatever reason I could not get them to put out less than 13.x volts. I believe it was responsible for frying a customer's S5 due to over-volting.
|
|
|
|
querulous
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 14, 2016, 03:25:56 AM |
|
hey guys, looking at getting these for my gpu miners.
Is there any chance of a breakout board that Has ATX and cpu connections on it? would rather use one psu rather then one for mobo and one for the gpus. preferable pay in BTC and live in Aus.
Cheers
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
June 14, 2016, 07:00:35 PM |
|
hey guys, looking at getting these for my gpu miners.
Is there any chance of a breakout board that Has ATX and cpu connections on it? would rather use one psu rather then one for mobo and one for the gpus. preferable pay in BTC and live in Aus.
Cheers
J4bberwock currently has one in development, however at this time I'm not aware of any server PSU breakout boards that have provision for 24-pin connector with +5 and +3.3V or CPU power for MoBo. You can power cards with server PSU and power risers/motherboard with lower-power ATX PSU though.
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
June 16, 2016, 02:34:42 AM |
|
Bump, get your PSU setups in time for S9's!
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
June 23, 2016, 01:31:00 PM |
|
Bump, S9's are power hungry. IBM 2880W has what you need!
|
|
|
|
|