Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
July 18, 2016, 02:16:19 PM |
|
Psu's to feed the beasts!
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
August 04, 2016, 06:44:10 PM |
|
Bump it up
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
August 05, 2016, 06:24:28 AM |
|
I got a bad combo PSU/Board. What's the easiest trick to test either the PSU alone or the breaking board ? (I don't have another PSU to test ...)
thanks
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
August 06, 2016, 05:01:46 AM |
|
I got a bad combo PSU/Board. What's the easiest trick to test either the PSU alone or the breaking board ? (I don't have another PSU to test ...)
thanks
Was that the 2880W board you got from me in March, or was it a set you picked up second hand? When you plug the AC power into the front of the board, does the green AC light turn on through the fan pack?
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
August 06, 2016, 03:28:43 PM |
|
I got a bad combo PSU/Board. What's the easiest trick to test either the PSU alone or the breaking board ? (I don't have another PSU to test ...)
thanks
Was that the 2880W board you got from me in March, or was it a set you picked up second hand? When you plug the AC power into the front of the board, does the green AC light turn on through the fan pack? It's hard to tell me if it's the one you sold me because i bought some used also. My hosting reported it as not working anymore (No light nothing) but he tested it one more time before he bring it back to me and it started up. I will try to figure out if it's the just switch or heat/cold. I will test it tomorrow.
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
|
August 06, 2016, 09:32:00 PM |
|
Are these safe to use with GPU rigs to mine with as maybe consider to buy as the power is insane and to get anything like this on a normal PSU is $300 to $400+ for 1600watt . What rated are these IBM breakout units?
|
|
|
|
alfaris
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 06, 2016, 09:36:21 PM |
|
Are these safe to use with GPU rigs to mine with as maybe consider to buy as the power is insane and to get anything like this on a normal PSU is $300 to $400+ for 1600watt . What rated are these IBM breakout units?
what about 8 pin GPU ??
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
|
August 06, 2016, 10:04:09 PM |
|
Are these safe to use with GPU rigs to mine with as maybe consider to buy as the power is insane and to get anything like this on a normal PSU is $300 to $400+ for 1600watt . What rated are these IBM breakout units?
what about 8 pin GPU ?? Just spotted that only seeing 6 pin adaptors its o kfor 6 pin by looks but most gpus have 6 and 8 pin and didn't notice that so I would also like to know as you started their any 8 pin version?
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
August 25, 2016, 06:52:08 PM |
|
Bump it up. Have some very large orders coming in shortly, anyone who wants smaller batches would be wise to get them now before I get tied up for a few weeks.
|
|
|
|
carlosmnk
|
|
August 26, 2016, 02:25:19 PM |
|
Hi, i have problems with two 2900w bladecenter psu's; i don't know if they are running well. Sometimes they are turning off with no apparently reason. Somewho have any problem with them? I bought them from eBay and then i bought the special with cheese from holybitcoin.com. Somewho have the same model? Thanks in advance! PS: Now they have some dust; they are stored in a wrong place...
|
Played with: USB RedFury - BlackArrows Prospero X1/X3 - Butterfly Monarch- Spondoolies SP20E - Avalon 6 - Antminer U3/S3/S3+/C1/S5/S7 Batches 3-7-8 - Sfards SF100 - Innosilicon A2 Terminator - Alcheminer 96/256 - KNC Titan - Etherum Rigs
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
August 26, 2016, 06:59:20 PM |
|
Running and shutting down is typical of thermal shut-off. What miners do you have hooked up to this PSU, and what is the temperature in the hosting area?
|
|
|
|
carlosmnk
|
|
August 26, 2016, 07:24:10 PM |
|
Running and shutting down is typical of thermal shut-off. What miners do you have hooked up to this PSU, and what is the temperature in the hosting area?
At the beginning, an alcheminer each one and the last time one of them titan cubes; up to 2.200w with alcheminer and up to 1.400w with titan cubes; temperature could be between 25C/35C (night/day). The titans are working at 60C/70C and not hotter. Here the summer is too hot for me...
|
Played with: USB RedFury - BlackArrows Prospero X1/X3 - Butterfly Monarch- Spondoolies SP20E - Avalon 6 - Antminer U3/S3/S3+/C1/S5/S7 Batches 3-7-8 - Sfards SF100 - Innosilicon A2 Terminator - Alcheminer 96/256 - KNC Titan - Etherum Rigs
|
|
|
lippsman
Newbie
Offline
Activity: 10
Merit: 0
|
|
September 13, 2016, 12:55:29 AM |
|
Hey Finsky I sent you a PM
Thanks
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
September 13, 2016, 12:57:22 AM |
|
Got it and your emails today. Will get back to you tonight, was away for the weekend. Thanks
|
|
|
|
bilabonic
|
|
October 01, 2016, 12:06:55 PM |
|
Got it and your emails today. Will get back to you tonight, was away for the weekend. Thanks
Hi mate, I have two IBM Bladecentre H Chassis 2880w See here - https://bitcointalk.org/index.php?topic=1631365.new#newI am looking to purchase two Breakout boards and 2 sets of PCI-e leads, wht is the process of ordering ? Can pay via BTC and i am based in the UK... Do you recommend running one or two s7/s9s of each PSU ? Cheers
|
BTC - 1Ayax24aAU8c1xwAakK94DVDkm4kbfZ8Ch
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
October 02, 2016, 04:39:36 PM |
|
Hi mate, I have two IBM Bladecentre H Chassis 2880w See here - https://bitcointalk.org/index.php?topic=1631365.new#newI am looking to purchase two Breakout boards and 2 sets of PCI-e leads, wht is the process of ordering ? Can pay via BTC and i am based in the UK... Do you recommend running one or two s7/s9s of each PSU ? Cheers Have you tried contacting J4bberwock yet about UK sales? He is based in EU and would be way more affordable on shipping. He has been difficult to get ahold of in the past though. You can run 2x S7's or S9's of any batch on 1 IBM 2880W PSU. It is literally a perfect plug & play solution for them, as long as you have 200+V AC input.
|
|
|
|
andresrp
Member
Offline
Activity: 135
Merit: 11
|
|
November 30, 2016, 07:02:08 PM |
|
Finsky waiting on the pm. bump
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
December 14, 2016, 04:27:28 PM |
|
Anyone know where to get the breakout boards for other (smaller) server PSUs? Im thinking of the hp 1200w or 1500w
|
|
|
|
J4bberwock
|
|
December 17, 2016, 08:44:43 PM |
|
Anyone know where to get the breakout boards for other (smaller) server PSUs? Im thinking of the hp 1200w or 1500w
If you are looking for DPS1200FB-A and the 1500w variant using the "common slot" interface, I have boards for those too.
|
|
|
|
Finksy (OP)
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
December 26, 2016, 08:37:28 PM |
|
OP updated with option to upgrade to IBM 2980W Platinum PSU's. For the first 10 PSU packages sold I will upgrade to 2980W PSU's for free!!! Prices updated to reflect current PSU market pricing unfortunately . If you have access to cheaper PSU's (which can be found in small quantities if you are resourceful), take advantage of this and save yourself some money!
|
|
|
|
|