I would just a reset via the reset button..set it back to defaults.
Powered the PSU and miners. Had different green LED action between the two, looked that up.
Front face plate next to the fan intake guard is one green flashing, if no hashing returns it stops flashing and alarm (if not disabled, i think) sounds.
Looking top down on the miner, just inside next to the fan are 3 bright green LEDs, those should all be flashing,
Figured the miner is running, but is not hashing. Opened window and got more air to them... Miner Status populated for a second telling me what I had just figured out... that miner is too hot!
I have 2 identical machines next to each other. One was overheating while the other was warmer from sitting next to it but otherwise fine. Got the heat down, no brain damage, all 0000000000's. Whew.
Worried that I've got my evga 1300 somehow crossed so that different PSU rails are powering the same hashing board.
little help there? EDIT 2 power cables to the S5 are splitters powering an entire blade. the rest are 1 to 1.
where should i position the splitters?
where should i position 2x 1 to 1 that are going to the same board?
http://en.community.dell.com/resized-image.ashx/__size/550x0/__key/communityserver-discussions-components-files/3746/ev13s.jpgthank thank thank