Bitmain bringt einen neuen Miner raus
Antminer A3
https://shop.bitmain.com/productDetail.htm?pid=00020180116164357365a2ljX8gx06D31. Specifications and other information of the Antminer A3 are as mentioned below.
2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4.The shipping for this batch will be arranged within 10 working days after Bitmain has received full payment. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.
5. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the A3.
6. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.
Parameters of ANTMINER A3
No.
Parameters
Value
1
Product model
A3
2
Hash ASIC type
BM1720
3
Hashing algorithm
Blake(2b)
4
Total quantity of hash chips
180 chips
5
Total quantity of hash boards
3 boards per miner
6
Total hash rate
815GH/s±5%
7
DC voltage input
11.60~13.00 V
8
DC current input @12V DC
98.8 A +7%
9
DC Power @12V DC input
1186 W +7%
10
220VAC Power @25℃ ,93%
conversion efficiency of APW3
1275 W +7%
11
220VAC Power efficiency @25℃,93% conversion efficiency of APW3
1.56mJ/MH+7%
12
Weight(without package)
4.2 kg
13
Operation temperature
0-40 ℃
14
Storage temperature
-40-85 ℃
15
Operation humidity
5%RH-95%RH,
prevent condensation
16
Noise
76 dB
17
Networking connection mode
Ethernet Cable
18
Power connection mode
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up.
19
Size(Length*Width*Hight,without package)
321mm*125mm*208mm