waffles99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 02:49:36 PM |
|
This thing is gonna blow up so hard. Wish I could see the look on all the trolls faces when that happens. Too bad many people will miss this boat because of skepticism....that's just the way of the world chico sorry bud but buy support looks too bad for me to retain confidence 4btc sell would slump price to 80k
|
|
|
|
Hyperjacked
Legendary
Offline
Activity: 1610
Merit: 1119
It's all mathematics...!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 02:53:38 PM |
|
We should request that ICM fixes the github and gives proper credit to the prior contributors of the code base. Could you do this for the community industrialcoinmagic?
This would be a ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) good chance to prove yourself as being a good and competent developer that is responsive to the community. I would personally buy the rest that i need for a masternode if you did this, since it would greatly increase my confidence in CRAVE and i am sure many others would feel the same way. The way the github looks now is just unprofessional and does not inspire confidence, please fix the github dev and give proper credit to the prior contributors of the code base, it is the right thing to do. Let me get this straight...giving credit to the prior contributors of the code base? What? Lol! You mean the talented Devs that got manipulated by the upper management of the coin formally known as Dark and received peanuts in return...Played and used by the crypto elite...really? Who do you think is behind this coin sir? Great men have always stood on the shoulders of other great men...ICM is a class act and you should read his posts before your look like a fool! Hey Vertoe I know your sitting in front this screen with a big pretty smile....Do you have anything to offer on this subject! I will make sure to screen shot it because the crypto elite have been deleting our posts! Cheers and I will drink a beer 2 Ya
|
@Hyperjacked1 Twitter
|
|
|
waffles99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 02:56:52 PM |
|
Hey Vertoe I know your sitting in front this screen with a big pretty smile....Do you have anything to offer on this subject! I will make sure to screen shot it because the crypto elite have been deleting our posts! Cheers and I will drink a beer 2 Ya
@Vertoe ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
Hyperjacked
Legendary
Offline
Activity: 1610
Merit: 1119
It's all mathematics...!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:01:13 PM |
|
Guess I just feel like I'm watching 8 mile trolls...Can you trolls at least bring up something about Crave that we don't already know? *Drops Mic*
|
@Hyperjacked1 Twitter
|
|
|
fnz
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:01:58 PM |
|
For those of you that want to compile crave: Assuming you have all the dependencies. For libsecp256k1: git clone https://github.com/bitcoin/secp256k1.git cd secp256k1 ./autogen.sh ./configure make sudo make install sudo ldconfig
Crave: git clone https://github.com/industrialcoinmagic/crave.git
Now we have the latest secp256k1, but crave doesn't support that, you should apply this simple patch to crave, Copy this in the same directory as crave/ to a file named latest_libsec.patch http://pastebin.com/K1HCS8hWcd crave patch -p0 < latest_libsec.patch
If just compiling the daemon: cd src/ make -f makefile.unix
If compiling with gui (make sure you're using qt5) Hope that can help.
|
|
|
|
abel1337
Legendary
Offline
Activity: 2492
Merit: 1145
Enterapp Pre-Sale Live - bit.ly/3UrMCWI
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:02:09 PM |
|
@devvvv!!!! please for my own sustenance, drop by with a tree fiddy!!!!! This would be so epic!
|
|
|
|
sologap
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:02:51 PM |
|
what about old users ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) keep up the good work
|
◥◣◥◣◥◣ ☠ CRAVE ☠ Embraces the privacy movement ☠ ◥◣◥◣◥◣◥◣◥◣◥◣ Your Market. Your Blockchain Business. Your Profit. ◥◣◥◣◥◣
|
|
|
YourMother
Legendary
Offline
Activity: 1281
Merit: 1046
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:04:58 PM |
|
I'm waiting for the dev to release the cutting edge LOGO design so we can go to the moon.
God, we have the greatest dev in the industry. #internetmagicalcoinwilldeliver
|
The absolute worst people in history, ranked by the wisdom of the crowd: "Vlad the Impaler", "Mihnea the Evil", "Ivan the Terrible" and "Evan the Instaminer".
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:05:32 PM |
|
For those of you that want to compile crave: Assuming you have all the dependencies. For libsecp256k1: git clone https://github.com/bitcoin/secp256k1.git cd secp256k1 ./autogen.sh ./configure make sudo make install sudo ldconfig
Crave: git clone https://github.com/industrialcoinmagic/crave.git
Now we have the latest secp256k1, but crave doesn't support that, you should apply this simple patch to crave, Copy this in the same directory as crave/ to a file named latest_libsec.patch http://pastebin.com/K1HCS8hWcd crave patch -p0 < latest_libsec.patch
If just compiling the daemon: cd src/ make -f makefile.unix
If compiling with gui (make sure you're using qt5) Hope that can help. Hmm that's strange.. after I did make install I didn't have to do any of that, it worked fine without having to do the patch or anything you mention.
|
|
|
|
hepilord
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:06:47 PM |
|
i still get this error when i want to start mn: not capable masternode: Unknown. Check debug.log for more information. I do according to this: How do I set up a Master Node??
in linux http://www.cravecoin.info/master-node-guide/Here are instructions on how to set up a masternode in Windows environment:Start up and sync your wallet. Open debug console, type: masternode genkey Copy output key into a text file to be used later Then, in debug console type: getaccountaddress 0 Copy output address into a text file to be used later Send 500 CRAVE to address output above, no more, no less. Exactly 500. Close Wallet Create/Edit crave.conf: maxconnections=100 rpcuser=solo rpcpassword=user rpcport=9999 gen=0 server=1 daemon=1 reservebalance=9999999 masternodeaddr=YOUR_IP:9999 masternode=1 masternodeprivkey=KEY GENERATED BY COMMAND rpcallowip=127.0.0.1 Save Wait 15 blocks (see confirmations from wallet you sent 500 CRAVE) To start masternode wallet, open debug console and type: masternode start First of all, that Linux guide is a disaster. Doesn't show where a command to install dependents begins and where one ends. There's no section showing how to actually compile a qt wallet, and the section where you set up TOR's confusing. The Windows instructions are very easy. Good luck with the Linux part is all I can say. can enyone help? i working on windows no one help me? port 9999 is open, still not work
|
|
|
|
gnargnar
Legendary
Offline
Activity: 1111
Merit: 1000
crypto-enthusiast since 2012
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:07:54 PM |
|
New Crave BCT Signature is out !!!!do you like it? Do you want to use it? PM me here so I will send you the code to put in your profile/signature ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:08:44 PM |
|
no one help me? port 9999 is open, still not work
Did you put the correct masternode ip address? Are you running the client as a separate instance?
|
|
|
|
fnz
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:08:58 PM |
|
i still get this error when i want to start mn: not capable masternode: Unknown. Check debug.log for more information. I do according to this: How do I set up a Master Node??
in linux http://www.cravecoin.info/master-node-guide/Here are instructions on how to set up a masternode in Windows environment:Start up and sync your wallet. Open debug console, type: masternode genkey Copy output key into a text file to be used later Then, in debug console type: getaccountaddress 0 Copy output address into a text file to be used later Send 500 CRAVE to address output above, no more, no less. Exactly 500. Close Wallet Create/Edit crave.conf: maxconnections=100 rpcuser=solo rpcpassword=user rpcport=9999 gen=0 server=1 daemon=1 reservebalance=9999999 masternodeaddr=YOUR_IP:9999 masternode=1 masternodeprivkey=KEY GENERATED BY COMMAND rpcallowip=127.0.0.1 Save Wait 15 blocks (see confirmations from wallet you sent 500 CRAVE) To start masternode wallet, open debug console and type: masternode start First of all, that Linux guide is a disaster. Doesn't show where a command to install dependents begins and where one ends. There's no section showing how to actually compile a qt wallet, and the section where you set up TOR's confusing. The Windows instructions are very easy. Good luck with the Linux part is all I can say. can enyone help? i working on windows no one help me? port 9999 is open, still not work Are you behind a router? If so you need to forward from your router's port 9999 to your ip at 9999
|
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:09:29 PM |
|
New Crave BCT Signature is out !!!!do you like it? Do you want to use it? PM me here so I will send you the code to put in your profile/signature ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Looks awesome !!! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
Blazin8888
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:12:16 PM |
|
New Crave BCT Signature is out !!!!do you like it? Do you want to use it? PM me here so I will send you the code to put in your profile/signature ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Try and get the real logo in there
|
|
|
|
gnargnar
Legendary
Offline
Activity: 1111
Merit: 1000
crypto-enthusiast since 2012
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:12:24 PM |
|
New Crave BCT Signature is out !!!!do you like it? Do you want to use it? PM me here so I will send you the code to put in your profile/signature ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Looks awesome !!! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Sent you a pm !! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
hepilord
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:15:00 PM |
|
no one help me? port 9999 is open, still not work
Did you put the correct masternode ip address? Are you running the client as a separate instance? one more question coins sould be mature? in conf file i put my local ip addres and forward 9999 port on router, in crave client i generated addres and send 500 coins as in quoted torurial
|
|
|
|
tx42
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:15:15 PM Last edit: April 13, 2015, 03:30:10 PM by tx42 |
|
I pmed the dev about this a few days ago, but haven't received any response, nor has anything been done about these, so I'm posting this here now hoping it'll get some answers. This is not the message I sent, this is reworded for general users who I don't expect to know much about the code. There are multiple things I've found in the code that seem like problems. In the masternode payment enforcement, the code for checking that masternodes are being paid is checking the wrong transaction. In btc(and pow coins like darkcoin which the code came from) the block reward is in the first transaction (vtx[0]), and in PoS forks like crave is, vtx[0] is always left empty and the block reward is in vtx[1]. It can be seen here https://github.com/industrialcoinmagic/crave/blob/master/src/main.cpp#L2375 and https://github.com/industrialcoinmagic/crave/blob/master/src/main.cpp#L2357 that the code was not updated to look in vtx[1], and continues to look at vtx[0]. It can also be seen a little higher up in the same function that the block verification does check that vtx[0] is empty https://github.com/industrialcoinmagic/crave/blob/master/src/main.cpp#L2302 . Since block verification checks that vtx[0] is empty to even get to masternode payment verification, payment verification will never find an output to a masternode in that loop, and should reject all blocks, except it doesn't deadlock due to the next point. I have about 5 seconds to check this out, but vtx[1] is the marker for PoS in crave. https://github.com/industrialcoinmagic/crave/blob/master/src/main.h#L728If the rest of your analysis is equally flawed, I'd suggest to the community not to waste to much time worrying about it. [addendum]The second paragraph is flawed too. The first points to CBlock and the second to CTransaction.
|
█ █ ██ ███ ███ ████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████ ███ ███ ██ █ ██ █ ██ ███ ███ ████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████ ███ ███ ██ █ █
|
|
|
Yaremi
Legendary
Offline
Activity: 1960
Merit: 1156
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:17:11 PM |
|
I'm waiting for the dev to release the cutting edge LOGO design so we can go to the moon.
God, we have the greatest dev in the industry. #internetmagicalcoinwilldeliver
Lonely troll ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) look https://www.youtube.com/watch?v=6EEW-9NDM5k![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FNClSRUg.gif&t=665&c=PRNq9GKQ3mXcgQ)
|
|
|
|
Hyperjacked
Legendary
Offline
Activity: 1610
Merit: 1119
It's all mathematics...!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2015, 03:17:35 PM |
|
We should request that ICM fixes the github and gives proper credit to the prior contributors of the code base. Could you do this for the community industrialcoinmagic?
This would be a good chance to prove yourself as being a good and competent developer that is responsive to the community. I would personally buy the rest that i need for a masternode if you did this, since it would greatly increase my confidence in CRAVE and i am sure many others would feel the same way. The way the github looks now is just unprofessional and does not inspire confidence, please fix the github dev and give proper credit to the prior contributors of the code base, it is the right thing to do. Let me get this straight...giving credit to the prior contributors of the code base? What? Lol! You mean the talented Devs that got manipulated by the upper management of the coin formally known as Dark and received peanuts in return...Played and used by the crypto elite...really? Who do you think is behind this coin sir? Great men have always stood on the shoulders of other great men...ICM is a class act and you should read his posts before your look like a fool! Crave is what the original Devs Envisioned...We all know Dark sold out and is now DASH the detergent... Wow it might go down in the record books at the biggest branding mistake of all time! I know your nervous Evan...just don't run away because we all know everyone depends on you for the centralized Dash! *drops mic* Evan I await your response! no need to send your boys let's hear from you!
|
@Hyperjacked1 Twitter
|
|
|
|