[ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark=

[child_harold]

I'm out...need sleep and some R&R! See you guys in a few days!
Never a doubt!

jumping ship?

[hepilord]

I still trynig start my MN and i have this: not capable masternode: Unknown. Check debug log....
In debug file i have this:

No valid UPnP IGDs found
upnp thread exit
receive version message: version 60020, blocks=37807, us=83.21.39.27:49531, them=104.131.12.207:30104, peer=104.131.12.207:30104
Added time data, samples 3, offset -3606 (-60 minutes)
Successfully synced, asking for Masternode list and payment list
P2P peers available. Skipped DNS seeding.
dnsseed thread exit
receive version message: version 60020, blocks=37807, us=83.21.39.27:49533, them=104.238.137.63:30104, peer=104.238.137.63:30104
Added time data, samples 4, offset -3607 (-60 minutes)
Successfully synced, asking for Masternode list and payment list
CActiveMasternode::ManageStatus() - Checking inbound connection to '192.168.1.8:9999'
CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
CActiveMasternode::ManageStatus() - Could not find suitable coins!
CActiveMasternode::Dseep() - Error: masternode is not in a running status
CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.1.8:49535, disconnecting
receive version message: version 60020, blocks=37807, us=83.21.39.27:49537, them=46.101.24.58:30104, peer=46.101.24.58:30104
Added time data, samples 5, offset -3607 (-60 minutes)
nTimeOffset = -3607  (-60 minutes)

Need to make sure you run getaccountaddress "0" from the rpc console and send exactly 500 CRAVE to that address.

still the same error

[hughbt]

Setting up these masternodes is a pain in the ass.  I tried to follow instructions in this post: https://bitcointalk.org/index.php?topic=997356.msg11054926#msg11054926 But i still get symbol lookup error secp256k1_start. I tried git reset a0d3b8 but it still doesnt help. 

[child_harold]

If anything could make DarkSend even slower it's running it thru the TOR network.
Do people here not know that TOR is insecure? Just ask Ross Ulbricht (ooops… u can't)

[guppy]

Same for me
I opened the port 9999 and 9998 for two masternodes, and i can't manage to make the 2nd with 9998 work, always got "not masternode capable'....i spent hours on it...gonna ask to a friend to help now
I followed everything that was explained
The 1st one is perfect.
If somebody has some clues...

[hepilord]

Same for me
I opened the port 9999 and 9998 for two masternodes, and i can't manage to make the 2nd with 9998 work, always got "not masternode capable'....i spent hours on it...gonna ask to a friend to help now
I followed everything that was explained
The 1st one is perfect.
If somebody has some clues...

I could't to start even one

[Hyperjacked]

I'm out...need sleep and some R&R! See you guys in a few days!
Never a doubt!

jumping ship?

Child Harold...welcome sir! On the contrary...I'm buying the dips and burning the manipulators!

Didn't you get the repeated memos?

[Litecoinkid]

I wish the pumpers and dumpers would move on with their trading bots,its so fucking annoying

[EmilioMann]

blah blah blah shit blah blah

wow childmolester_harold and noob accounts from shadowtrash began with fud here again?

again they start with fud and do a dump to try to cause panic sell when crave is rising?

I'm thinking if I will need bump that and create another threads like that on other areas of bct to they stop...


"The full truth behind ShadowCash/Coin trolls and their attacks on other coins."
https://bitcointalk.org/index.php?topic=818939.0

[Hyperjacked]

If anything could make DarkSend even slower it's running it thru the TOR network.
Do people here not know that TOR is insecure? Just ask Ross Ulbricht (ooops… u can't)

What no internet access in prison for good behavior? I thought that's where the SDC Fud Patrol is posting from...wait didn't Dragontail post photos of the SDC boys the other day?
Just kidding Child and no offense...Funny how you slipped in and posted when I left !
I hope everything works out for you guys...
Bye need more popcorn 

[snafflecoin]

Im buying lots of dips

[EmilioMann]

I have a few questions if the dev cares to enlighten me:

1- What is the purpose of those adrenaline nodes since they are not performing any coin mixing, just taking 2/3 of the PoS reward from stakers.

2- What anonimity/stealth features does this coin have since darksend is not working, nor is sendtostealthaddress.

3- Why use the abandoned lfnet irc network for peer discovery as it has proven to be an insecure/centralized solution.

Thanks!

this coin is under very fast construction

[Wheatclove]

I have a few questions if the dev cares to enlighten me:

1- What is the purpose of those adrenaline nodes since they are not performing any coin mixing, just taking 2/3 of the PoS reward from stakers.

2- What anonimity/stealth features does this coin have since darksend is not working, nor is sendtostealthaddress.

3- Why use the abandoned lfnet irc network for peer discovery as it has proven to be an insecure/centralized solution.

Thanks!

this coin is under very fast construction

you should probably stop trying to answer questions lol

[borris123]

managed to get 2 nodes working! now for the other 6....It must of been tor problem i work on getting them all working before start messing with tor. would not connect at all when using tor.

my conf for 1 and 2 which are working are.

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=******
rpcport=9991
server=1
daemon=1
listen=0
staking=0
port=9999
masternodeaddr=*****:9999
masternode=1
masternodeprivkey=*******

rpcallowip=127.0.0.1
rpcuser=*****
rpcpassword=******
server=1
rpcport=9992
daemon=1
listen=0
staking=0
masternodeaddr=*****:9999
masternode=1
port=9999
masternodeprivkey=******

these 2 work. my 3rd one does not and it is the same just port changed

rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*****
rpcport=9993
server=1
daemon=1
listen=0
staking=0
masternodeaddr=******:9999
masternode=1
port=9999
masternodeprivkey=*******

what i done wrong??

[TimC]

managed to get 2 nodes working! now for the other 6....It must of been tor problem i work on getting them all working before start messing with tor. would not connect at all when using tor.

my conf for 1 and 2 which are working are.

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=******
rpcport=9991
server=1
daemon=1
listen=0
staking=0
port=9999
masternodeaddr=*****:9999
masternode=1
masternodeprivkey=*******

rpcallowip=127.0.0.1
rpcuser=*****
rpcpassword=******
server=1
rpcport=9992
daemon=1
listen=0
staking=0
masternodeaddr=*****:9999
masternode=1
port=9999
masternodeprivkey=******

these 2 work. my 3rd one does not and it is the same just port changed

rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*****
rpcport=9993
server=1
daemon=1
listen=0
staking=0
masternodeaddr=******:9999
masternode=1
port=9999
masternodeprivkey=*******

what i done wrong??

You need to have different RPCPort and a different Port for each working MN. You have both .conf files using the same PORT 9999. You need to change one to something like 9998 or 10000.

MN1
masternodeaddr=*****:9999

MN2
masternodeaddr=*****:9998

[borris123]

managed to get 2 nodes working! now for the other 6....It must of been tor problem i work on getting them all working before start messing with tor. would not connect at all when using tor.

my conf for 1 and 2 which are working are.

rpcallowip=127.0.0.1
rpcuser=****
rpcpassword=******
rpcport=9991
server=1
daemon=1
listen=0
staking=0
port=9999
masternodeaddr=*****:9999
masternode=1
masternodeprivkey=*******

rpcallowip=127.0.0.1
rpcuser=*****
rpcpassword=******
server=1
rpcport=9992
daemon=1
listen=0
staking=0
masternodeaddr=*****:9999
masternode=1
port=9999
masternodeprivkey=******

these 2 work. my 3rd one does not and it is the same just port changed

rpcallowip=127.0.0.1
rpcuser=******
rpcpassword=*****
rpcport=9993
server=1
daemon=1
listen=0
staking=0
masternodeaddr=******:9999
masternode=1
port=9999
masternodeprivkey=*******

what i done wrong??

You need to have different RPCPort and a different Port for each working MN. You have both .conf files using the same PORT 9999. You need to change one to something like 9998 or 10000.

MN1
masternodeaddr=*****:9999

MN2
masternodeaddr=*****:9998

just tried

rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=9993
server=1
daemon=1
listen=0
staking=0
masternodeaddr=****:9998
masternode=1
port=9998
masternodeprivkey=

still get error

not capable masternode: Could not connect to *****:9998

that is for masternode 3. The 1st 2 configs work and they have not got the ports changed like you said only the rpc port number.

[TimC]

still get error

not capable masternode: Could not connect to *****:9998

that is for masternode 3. The 1st 2 configs work and they have not got the ports changed like you said only the rpc port number.

Do you have the latest wallet? The zipped file is named cravex64mn7.7z and you can download it from the OP

Here is my config and it is working with three MN

Read the following if you want to setup more then one master node using the same computer with one ip address.

You can change the port and the rpcport and setup more if you want.

You will need one copy of the data dir and the crave-qt.exe for each master node that you wan to run.

Here is an example of running three master nodes.

Folder that hold the block chain and .conf files
C:\SubFolders\CraveMasterNode1
C:\SubFolders\CraveMasterNode2
C:\SubFolders\CraveMasterNode3

Folders that contain the crave-qt.exe and the .bat files to launch the masternode
c:\MyFiles\CraveMN1\
c:\MyFiles\CraveMN2\
c:\MyFiles\CraveMN3\

Then in each of the above folders you would put in the following .bat files to launch the master nodes.

StartMasterNode1.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode1

StartMasterNode2.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode2

StartMasterNode3.bat
crave-qt -datadir=C:\SubFolders\CraveMasterNode3

Also in each of the data dir you need to put in a crave.conf file like the following.
Notice with each config they use a different port and a different rpcport for each crave.conf.
It is best to have staking=0 so it does not stake.

crave.conf for use with Crave Master Node 1

Code:

maxconnections=100
rpcuser=YourRPCUser
rpcpassword=YourRPCPassword
rpcport=30105
port=9999
gen=0
server=1
daemon=1
staking=0
reservebalance=500
masternodeaddr=YouIPAddress:9999
masternode=1
masternodeprivkey=YourMasterKey
rpcallowip=127.0.0.1

crave.conf for use with Crave Master Node 2

Code:

maxconnections=100
rpcuser=YourRPCUser
rpcpassword=YourRPCPassword
rpcport=30106
port=9998
gen=0
server=1
daemon=1
staking=0
reservebalance=500
masternodeaddr=YouIPAddress:9998
masternode=1
masternodeprivkey=YourMasterKey
rpcallowip=127.0.0.1

crave.conf for use with Crave Master Node 3

Code:

maxconnections=100
rpcuser=YourRPCUser
rpcpassword=YourRPCPassword
rpcport=30107
port=9997
gen=0
server=1
daemon=1
staking=0
reservebalance=500
masternodeaddr=YouIPAddress:9997
masternode=1
masternodeprivkey=YourMasterKey
rpcallowip=127.0.0.1

[DonQuijote]

is darksend working fine?

[waffles99]

see https://bitcointalk.org/index.php?topic=997356.msg11079962#msg11079962

and https://bitcointalk.org/index.php?topic=997356.msg11080012#msg11080012

[EmilioMann]

is darksend working fine?

not yet
under development