Bitcoin Forum

Our developer doesn’t ask for a donation, but he provides the ability to donate less than 1% of your mining endeavors on rigs running on nvOC to help support the project. This donation is optional and if you select “NO”, then nothing will be taken. But, remember, he has a family to feed too (including a young baby)!

nvOC is a fork of the original fullzero nvOC mining operating system. Currently, the underlying operating system is Ubuntu 16.04 LTS. But, we are considering changing that for a more lightweight platform.

As of right now, nvOC supports telegram, SSH, and Teamviewer, all out of the box. Of course, you need to know your way around command line for SSH, but otherwise, the software is designed to be robust.

You can find our latest downloads in the #downloads channel of our Discord, where there are frequently posted updates for the software and bug fixes, also where the developer and his dinosaurs provides software support for free.

nvOC is fully supported from a USB boot drive and requires nothing fancy in terms of I/O usage or the like. In fact, we recommend you use USBs over a mechanical or SSD drive.

To use the software it is simple, download it from the #downloads channel in our Discord, unzip it, run the etcher software, select your USB drive, and Etch. No complicated editing of grub menus or frustrating linux quarks. Once etched, go ahead and boot up the USB and let the software check for any minor updates, the software will usually reboot after the update.

Everything you need is literally located in the $Home directory of the Ubuntu Install. In most cases, all you need to do is edit the 1Bash with your mining details and confirm which built in mining software you wish to you, and off you are.

Literally, you’re done for a basic 1-coin configuration. Save the bash, and click on the terminal icon. That easy.



Features Set :

• Auto-overclocking technology: System will detect which manufacture makes your card, and apply overclocks to the card to maximize your performance on the fly.
  
  Dual Windows for added system visability: See errors and an extensive log to make sure everything is optimal.
  
   Watchdog: System will watch for system instability and take the appropriate action, either by restarting the system, the miner, or even each individual GPU that fails.
  
  Individual overclocking parameters: You can set individual overclocks per card that you wish nvOC to maintain.
  
  Quake and Terminal commands: Troubleshooting and managing your miners have never been easier.
  
  Set Power limits, Fan Speeds, and Temperature Controls: all within the confinement of $HOME.
  
  Built-in Profitability Detection System: Do you like to mine multiple coins, but don’t like checking whattomine every second of the day? Well, nvOC will check the site for you and apply the set conditions that you want. This work was originally created by Papami, enhanced by PoisonXA
  
  Algos Everywhere!!!: nvOC supports more algorithms than you thought ever existed. Head over to our pastebin for specific patch note details.

Support Every Day: PoisonXA and his dinosaurs are on Discord to help solve your problems. If we can’t talk you through it, we can remote into your machine, once you enable TeamViewer and solve most problems within minutes.

The future and what it entails for  PXA nvOC:

My Pledge to PXA's nvOC User Base:





( NEW)

Zip File sha256:
Image File sha256:

Some 1.8.4 Screenies:
https://thumb.ibb.co/ni5sUw/20171207_140142.jpg (https://ibb.co/ni5sUw) https://thumb.ibb.co/i6Gcwb/20171207_140743.jpg (https://ibb.co/i6Gcwb) https://thumb.ibb.co/d0wz9w/20171207_141353.jpg (https://ibb.co/d0wz9w) https://thumb.ibb.co/dWZ82G/ccminer223.png (https://ibb.co/dWZ82G)



1.9.3 Screenies:
https://thumb.ibb.co/fH6XUw/1.png (https://ibb.co/fH6XUw) https://thumb.ibb.co/c6NZbb/2.png (https://ibb.co/c6NZbb) https://thumb.ibb.co/dnGGpw/3.png (https://ibb.co/dnGGpw) https://thumb.ibb.co/dwq99w/4.png (https://ibb.co/dwq99w) https://thumb.ibb.co/k1zQhG/5.png (https://ibb.co/k1zQhG) https://thumb.ibb.co/f1q99w/6.png (https://ibb.co/f1q99w)

CHOSN PREVIEW:
http://thumb.ibb.co/b3cs1H/preview.png (http://ibb.co/b3cs1H)

Some Tuts:
nvOC V 1.9.1 Released By PoisonXA
Instructions:
Use the enclosed program called etcher to write the img file to a 16gb+ usb stick.
Once completed open the second partition in windows and edit the file 1bash with notepad or notepad++

Feature list include:

################ PAPAMPI_WTM_AUTO_SWITCH ####################
PAPAMPI_WTM_AUTO_SWITCH: when enabled and setup will check www.whattomine.com for the most profitable coin to mine at the time
To setup you must first to go www.whattomine.com and on the top select the gpus you currently have on that rig and hit calculate
once done copy the address on the address bar and paste it inside of 1bash where it says WTM_AUTO_SWITCH_URL=
and then add to the end of the address http://whattomine.com/coins? just add .json and leave the rest the same

It should look like this when your done:
http://whattomine.com/coins.json?utf8=%E2%9C%93&adapt_q_280x=0&adapt_q_380=0&adapt_q_fury=0&adapt_q_470=0&adapt_q_480=3&adapt_q_570=0&adapt_q_580=0&adapt_q_750Ti=0&adapt_q_1050Ti=0&adapt_q_10606=0&adapt_q_1070=0&adapt_q_1080=0&adapt_q_1080Ti=25&adapt_1080Ti=true&eth=true&factor%5Beth_hr%5D=875.0&factor%5Beth_p%5D=3500.0&grof=true&factor%5Bgro_hr%5D=1450.0&factor%5Bgro_p%5D=5250.0&x11gf=true&factor%5Bx11g_hr%5D=487.5&factor%5Bx11g_p%5D=4250.0&cn=true&factor%5Bcn_hr%5D=20750.0&factor%5Bcn_p%5D=3500.0&eq=true&factor%5Beq_hr%5D=17125.0&factor%5Beq_p%5D=4750.0&lre=true&factor%5Blrev2_hr%5D=1600000.0&factor%5Blrev2_p%5D=4750.0&ns=true&factor%5Bns_hr%5D=35000.0&factor%5Bns_p%5D=4750.0&lbry=true&factor%5Blbry_hr%5D=11500.0&factor%5Blbry_p%5D=4750.0&bk2bf=true&factor%5Bbk2b_hr%5D=70000.0&factor%5Bbk2b_p%5D=4750.0&bk14=true&factor%5Bbk14_hr%5D=108750.0&factor%5Bbk14_p%5D=5250.0&pas=true&factor%5Bpas_hr%5D=42500.0&factor%5Bpas_p%5D=5250.0&skh=true&factor%5Bskh_hr%5D=1187.5&factor%5Bskh_p%5D=4750.0&factor%5Bl2z_hr%5D=420.0&factor%5Bl2z_p%5D=300.0&factor%5Bcost%5D=0.1&sort=Profitability24&volume=0&revenue=24h&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=abucoins&factor%5Bexchanges%5D%5B%5D=bitfinex&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=hitbtc&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=&commit=Calculate

After select on WTM_AUTO_SWITCH_COINS= what coins you want to mine seperate the coins with an ;
the rest is self explanatory.
################ PAPAMPI_WTM_AUTO_SWITCH ####################

###################### TEMPERATURE AND KEEP ALIVE SETTINGS #######################
Having this on the YES will keep all your cards in a certain temperature that you select this feature is required for auto overclock also.
TEMPERATURE_CONTROL="YES"

TARGET_TEMP=70


__FAN_ADJUST=5      # Select how much you want to increase or decrease fan depending on temperature adjustment size in percent


POWER_ADJUST=5     # Select how much you want to increase or decrease the power to the gpu this in in watts

# Difference in actual temperature allowed before action:  Works only if current is BELOW target temp


ALLOWED_TEMP_DIFF=2

 select how much difference there should be before an action is made in temperature
# Restore original power limit if fan speed is lower than this percentage


RESTORE_POWER_LIMIT=90 select to what percentage the fan should reduce to to increase the power back to the maximum you selected

# lowest fan speed that will be used
MINIMAL_FAN_SPEED=50 select whats the lowest fan speed you prefer

Having this on the YES will keep your rig from crashing and if it does crash will reboot it to minimize downtimes




WATCHDOG="YES"
the RI feature under this is a sensitivity measurement which the lower the number the faster it reacts try to keep it under 6 unless its rebooting the pc before it even starts mining.
###################### TEMPERATURE AND KEEP ALIVE SETTINGS #######################

Having this on will allow for there to be specific overclocks that you determine depending on what coin your mining with wtm auto switch in the bottom of 1bash there is a list of algo specific overclcoks to set
damNmad_ALGO_SPECIFIC_OC="NO"

Select if you would like the troubleshooting mode enabled will leave the terminal open while mining to see pre launch diagnostics
DualWindows="YES"

Turn this on if you would like to run teamviewer on the rig Setup an account on teamviewer then connect monitor to rig and login to your account




TEAMVIEWER="NO"
Turn this on if you would like to be able to ssh onto the rig
SSH="YES"
Turn this on if you would like to use the same power limit and overclocks for all cards

POWERLIMIT="YES"

# kk003's video tutorial how to create a telegram bot and get Api Key + User Id:
# https://youtu.be/HS7Q1zH00bs
This will enable the miner to send you telegrams of whats going on use the video above to set it up



BaliMiner_TELEGRAM_ALERTS="YES"

#GPU#AUTOCS=LITE == Set this to your preffered aggressiveness SAFE - LITE - MED - HIGH - BRUTAL
#GPU#SCORE=0 ==      Set this to your preffered starting or set core overclock
#GPU#SMEM=0 ==      Set this to your preffered starting or set mem overclock
#GPU#MAXPL=150 ==  Set this to your preffered maximum powerlimit
#GPU0MAXTEMP=69 == Set this to your preffered maximum temperature
# LITE is the default auto overclock settings for no crash performance.
##############################################################################################

## GPU0
GPU0AUTOCS=LITE   
GPU0SCORE=0
GPU0SMEM=0
GPU0MAXPL=150
GPU0MAXTEMP=69

Been running PoisonXA's version for months, now, works great, he's super responsive, and always willing to help you get your shit working. Join the discord!

Great stuff from this nvOC version. For a complete noob like me, it does work pretty well. Also, the discord channel has some very awesome people where you can learn a lot.

Keep up the good work !

I have been going through all the version through, until 1.8.4
and it's rock solid. haven't had a single reboot or crash since then, and still at a higher hashrate than with the original 1.4

Thanks Poison for keeping me mining!

Been running this for a while now. Much better then other programs I have used. Poison and the others in discord are extremely helpful. A great community.
It is super simple. Download the image, flash your drive, update your 1bash file.

You should join the discord channel.

This OS is a must for miners with autoswitch, auto overclock and auto update features. Mining has never been so easy!

Two words: "Do It"

I found the original nvOC by fullzero from a youtube post by Vosk Coin. When I built my first mining rig, I jumped to try out nvOC because of the ease of use. I had a few minor issues that I brought up on Discord. Poisonxa helped me out with and got me up and running. After nearly a month of mining, I'm now running his latest release 1.9 on my trio rig and a new 8gpu rig I just finished building.

PoisonXA's version 1.9 and all of his improvements are amazing. The auto overclocking and temperature controls are super intuitive. Set your max temperature and your wattage and the OS does the rest. I can't wait to see what's next! Thanks PoisonXA for your hardwork and dedication to the project.

Some screenshots from the latest version (1.9) of PoisonXA's nvOC
https://imgur.com/gallery/z4FJt

This sounds pretty great, I was already planning on switching from smOS die to their web dashnoard claiming my rig to be offline even though it is still mining fine therefore making the whole point of the os useless.

Had my rig stop working today after 3 days of running fine and of course I'm out of town. Looking for something solid that has remote viewing ability that works. Plus I have a Wi-Fi power adapter shipping for cases like today.

Will be checking this out once I'm home tomorrow evening! Install the same as Fullzero's I would imagine?

exactly the same just etch to a usb or sdd edit 1bash with your information and boot up btw this has teamviewer 13 preinstalled

Nice fork :) But also no wifi or?

Wifi works just plug in the usb wifi and your golden

Any questions you might have you can get a fast response on our discord channel.

Running 3 of my rigs smoothly on Poison's releases. 2 of them are v17 and the latest one is v19. No crashing or rebooting, works like a charm

PROS
1) FREE with an option to donate to support development.
2) Auto OC for noobs like me
3) Lots of coins supported and auto switching sites like Mining Pool Hub, zpool, and (Ugh!) NiceHash is supported.
4) Auto restart and monitoring tools. With team viewer I can now monitor and even make changes on my rig using my phone
5) Excellent support by the author and from the members of the community.

CONS
1) Auto Update caused my Bash1 file to be changed to a default one luckily I detected it right away.
2) Not Sure if its the Watchdog program or my GPU's a problem but I keep getting low utilization on my GPU. So I adjusted watch dog sensitivity a little higher so it does not keep restarting.
3) A few bugs here and there which the author is continually addressing.

Wish List
1) More Coins just in case I need them.
2) Auto OC setting for each card. (GPU0 - High, GPU1 - Brutal, GPU2 - Normal)
3) Preserve  seting of coins and pools after an update.
4) I Hope any Ideas from the other fork will be added to this OS

Hello everyone
I discovered nvOC by chance on this forum and I'm happy
support on the discord is exemplary, distribution and fast bug fix.
the functions proposed as the auto-overclooking the automatic switch currency  are simply great.

easy to configure and use


thanks PoisonXa

 8) :o ;)

Does this OS go to sleep after X hours? I woke up this morning and turned the monitor on - it was at the 'enter password' screen. Then it loaded the desktop (as if it crashed?)

I checked my pool which said there was no downtime?

nvOC to the moon

This OS supports AsRock Pro H110 BTC+ 13xpci-e mainboard out of box. You dont have to enter in bios. Plug in 13 GPU and setup pools. There will be mining.

no this os does not sleep it mines for as long as theres power.

Maybe bminer? There is a thread @these forums. A lot of hype on that but I did not see any improvement mining ZEC with Linux.
As a user I feel kind of confused, there are now two "forks" of this awesome OS, which one to choose.. I am currently running the other branch on three rigs and I would not want to break anything. But automated OC feels tempting... :)

Have you considered combining your work?

--
Tigel

As one of the official contributors of the NVOC group I must say that this build has been one of the best builds I've seen so far. As you might know, overclocking is one of the hardest parts to do in Linxu. With fullzero's NVOC it was made a lot easier and with the current release of PoisonXA it has taken OC to the next level.
I have been using it on my rigs for some time now and the settings that it give to be the "sweet spot" of OC , I would have never guessed to put those numbers.
Also I've have been in contact with PoisonXA and looking forward to working together with him and making this built even greater. There is an awesome roadmap and plans for the future for this built so keep an eye out on this forum because you don't want to miss it.

I have only seen this problem with USB's that are starting to fail. I have not had it happen on the new version but I have seen it several times on the older versions from FullZero and it always turned out to be a failing USB or poor quality USB.

I personally also use PXA's Fork of nvOC.

He's a rare bred developer----actively involved and engaged with his user base.

Anyways, PXA nvOC is a frequently updated fork of FullZero's nvOC with pretty sexy features. What I like most about the product is it's auto overclock, no longer are you having to tediously tweak your cards. Enter acceptable values and boom, the OS will determine which clock is appropriate for your card.

If you want a 1,2,3 miner with the sophistication and all the bells and whistles you could want, try PXA's nvOC. I don't think you will regret it. Everyone on the Discord is friendly and there is usually someone around to help. No one bites, as far as I know, except for me.

new update up should fix alot of bugs and add alot of new features reimage for best results enjoy guys!

Guys if you have any issues feel free to contact me via discord I'm always on.

New version working great. Had a bunch of errors with the older version and they have now been corrected. Can't seem to get TeamViewer to load up but I'm sure I'm overlooking something outside of TeamViewer "YES" but auto-overclocking is working great - highest SOL/s I've ever got, temps are setting properly, voltage assigning correctly, etc. Very happy, thanks for the help I needed earlier too!

I've been running the original nvOC but taking a look at all the upgrades here I'm going to switch over thanks

guys i released a small patch to auto update to fix global overclocks and beta test ftc neo scrypt on ccminer 2.2.3

I'll be adding screenies and tuts shortly

screenshots added any questions feel free to write to me or go to our discord channel for support?

On latest build from @PoisonXA 1.9.3
Increased my hashrate like adding another gpu.
Gtx1060 6gb Aorus@3700 sol/s.
Before NvOC PAX I got 3350-3450 sol/s.
All os's running at 2.7 sol/s.

https://ibb.co/dFVk4m

flashed the image using etcher and later HDDraw on second attempt.
Every time when the system boots instead of the usual purple ubuntu loading screen  it  shows a black one with:
/dev/sda2:clean, etc/ etc files, etc/ etc blocks   and the prompt _ just blinks and nothing happens

flash drive was reformatted several times, checked for errors, nothing wrong.

Change usb port use a usb 2.0 port

Neoscrypt confirmed working with ccminer 2.2.3

Feel free once again to ask any questions im here to get you up and running.

This worked just for one start, then after  auto downloading updates and restarting the system, it was the same screen /dev/sda2:clean, etc/ etc files, etc/ etc blocks

So, this looks like incompatibility yet of the nvOC with a B350m board  +ryzen 1500x cpu. 

Tried the flash drive on asrock b250m and  all started ok, auto downloaded  some updates etc.. however two  unwelcome  situations happened :

first time of start after downloading something, unzipping, implementing etc. the screen ended up with downloading teamviewer and that was it ... no successful connection to wherever the nvoc was trying to connect (internet was running , i was using the firefox browser in the same time).
 removed (unticked) teamviewer from the relevant linux settings tab , on next restart system started up and loaded ok and went on  directly to mine the default BTG coin. I then stopped the terminal window and went on to edit 1 bash for my coin of choice.

changed coin to ZEN, changed pool settings etc for my pool choice, set ZM for miner saved file and rebooted.

After start up, the  terminal window began showing : cannot find miner  ( tried later with ewbf, same thing cannot find miner, both are in the respective ZEC folder and i did not touch anything else in the 1bash file )

Any idea why is this happening? 

I'll be more than happy to help u can u come to the discord channel for faster services

ok all issues resolved with that user anyone else with issues?

Just a small fix - 8coin at MPH-EQUIHASH address -> MPH_ADDRESS same at MPH-ETHASH

And can you add limits at OC?

i keep getting there is no screen to be resumed and the miner wont start everything was fine till the update its stuck in a loop and keeps rebooting also the screen scrolls a lot now

I had the same problem last night, I reburned the usb from scratch and it fixed it, not sure if a file was corrupted or something.... I also noticed the 1bash file changed back to default after the update and i had to change everything back.

What are you mining and did u try m_fix and from what version did u upgrade from?

No I tried to disable updates and it worked for awhile now it seems to be doing it again I'm using wtm switcher zen,btg,lbc I think when it switches to lbc is when it starts saying no miner available the reason I think this is when it starts doing it I look at 1bash in home and lbc is the chosen coin  

edit: I burnt the latest version is what its updating from also it seems to delete 1bash and 8coins so I can't edit them there still in m1 but missing from other drive

Could u get on discord and pm me ur teamviewer info

Yes I just changed lbc to zcoin but wanted lbc in the switcher I'll get on discord in few mins thank you

Poisonxa is one of the best dev's I was having some issues with my miner and he setup a time to TeamViewer into my miner and fix it I honestly never had a dev take the time out to remote into my rig and fix it and I've been mining for 4yrs now again thanks to poisonxa for the help and his fork of nvoc

poisonxa solved my rig's issue very quickly. Now running like a charm.
Will keep the donation to "YES"
You deserve it.

Every miner should at least try this. Give it a go for a few days.
You won't be disappointed.

Thanks Guys!

I just uploaded the latest stable version nomore versions until the new years!

Would anybody post their experience with this auto-overclock stuff? I've been wondering for a long time why that type of functionality hasn't been available, so I'm really curious how this project has implemented it. I've got a rig of 8x 1060 3GB that would be great for this type of thing.

if you go to our discord channel you can ask members live on there experience with it or you can try it for yourself.

I am very new to mining and i started out mining zcash with ethOS which worked for the most part, except when it crashed and i wasn't home to fix it. I stumbled onto nvOC through youtube videos from voskcoin and was immediately interested in trying this os. I went to www.nvov-mining-os.com and found community builds for nvidia cards only to find poisonxa's version PXA-1.9 with auto overclocks and other various features that i think would be to anyone's advantage. I immediately downloaded his version and installed it to my 8 card 1070ti rig. setting up for the first time was a bit of a learning curve (car mechanic, NOT COMPUTER WIZ) but i figured it out with the help of voskcoins videos. My results are very impressive for where i was on ethOS. I am just about 3950 sols on my 8 card 4.5 sol/w at 110 watts all running the auto overclock feature. That is about 300 more sols than i could achieve with ethOS without it crashing an hour into mining. I now have my 8 card 1070ti along with my 6 card 1070ti running on this OS. I am in the process of building 2 more 8 card 1070ti rigs and they will of course have this OS. If anyone is hesitant on trying this OS, I encourage you to do so! You won't be sorry.

The auto overclock feature is pretty impressive. I would have never thought to use the numbers provided by this feature. I started with 100 watts and was getting 470 sols at 4.7 sol/w. I bumped the watts up to 110 to get the sols to 490-500 per card

The watchdog is the saving grace!! it monitors the cards and will repair or reboot automatically if there is a crash. It works like a charm. I no longer have to worry about my rigs going down and losing profit. Just awesome!!
 

I did have some issues that weren't the fault of the software. It was me not knowing what i was doing and i went to the discord channel for nvoc and asked poisonxa for help. He immediately logged into my rig via teamviewer and showed me what i did wrong. That right there is priceless support if you ask me. Please be sure if you run this software to leave the donation turned on!!!!! He will help anyone that needs it no questions asked.


Bill

any hero member can confirm this is legit?

Isn't FFI2013 a hero?

Thanks for this release and keep the distro update.

This os is on nvoc-mining-os.com. i dont think it would be on there if it wasn't legit. its under community builds

Bill

hey, something weird started to happen here..

in 2 hours interval; zm miner loses connection and ewbf miner launches for 10-15 seconds. Then zm miner relaunches and mines for 2 hours. rinse repeat.
I did choose NOT to donate in 1bash, but seems like it is still donating without my approval..

Impossible you can check the code anyone can if the if statement isn't on yes it won't mine. It just can't mine. Please don't start rumors that are not needed.

Screen Log:

+-------------------------------------------------+
|         EWBF's Zcash CUDA miner. 0.3.4b         |
+-------------------------------------------------+
[36mINFO: Current pool: zec.suprnova.cc:142 [0m
[36mINFO: Selected pools: 1 [0m
[36mINFO: Solver: Auto. [0m
[36mINFO: Devices: All. [0m
[36mINFO: Temperature limit: 90 [0m
[36mINFO: Api: Disabled [0m
---------------------------------------------------
[31mERROR: Cannot connect to the pool [0m
2017-12-26 02:52:23 PM|#  zm 0.5.7
2017-12-26 02:52:23 PM|#  GPU0 + GeForce GTX 1060 3GB     MB: 3012  PCI: 1:0
2017-12-26 02:52:23 PM|#  GPU1 + GeForce GTX 1060 3GB     MB: 3013  PCI: 2:0
2017-12-26 02:52:23 PM|#  GPU2 + GeForce GTX 1060 3GB     MB: 3013  PCI: 4:0
2017-12-26 02:52:23 PM|#  GPU3 + GeForce GTX 1060 3GB     MB: 3013  PCI: 5:0
2017-12-26 02:52:23 PM|#  GPU4 + GeForce GTX 1060 6GB     MB: 6072  PCI: 6:0
2017-12-26 02:52:23 PM|#  GPU5 + GeForce GTX 1060 6GB     MB: 6072  PCI: 8:0
2017-12-26 02:52:23 PM|#  GPU6 + GeForce GTX 1060 3GB     MB: 3013  PCI: 9:0
2017-12-26 02:52:23 PM|#  GPU7 + GeForce GTX 1060 3GB     MB: 3013  PCI: 10:0
2017-12-26 02:52:23 PM|
2017-12-26 02:52:23 PM|#  telemetry server started
2017-12-26 02:52:23 PM|#  connected to: eu1-zcash.flypool.org:3333
2017-12-26 02:52:25 PM|#  server set difficulty to: 0004189374bc6a7ef9db22d0...
2017-12-26 02:52:50 PM|>  GPU2  62C  Sol/s: 312.1  Sol/W: 3.44  Avg: 312.1  I/s: 162.9  Sh: 0.00   . . 

This is happening every 2 hours...

It's not connecting??? Says it failed. So that's not for me sorry check your config and I don't mine in flypool either and about suprnova if u see it fails to connect so it is disabled but there's an error in config somewhere that it's disconnecting every 2 hours

Now did you update from an older version??? Or did you full image etch??

updated several hours ago with auto-update YES and STABLE version selected. Just checked 8coins and replaced the $coin == ZEC part, trying again atm. Maybe after the update config got messed up. I'll try to re-flash the OS if the problem repeats.

I will vouch for poisonxa and his fork of nvOC again I had some issues that he was willing to team viewer into my rig and fix and not only is this just about un heard of in crypto land without someone wanting to charge you but he took the time out on Christmas to do it I would of waited but he said no problem lets fix it I also turned the donation on to help return the favor now if I could get rid of my amd rigs and switch them to nvidia I would put this os on all my rigs also I don't think fullzero and the other guys on the original nvOC would put his fork on the nvOC website for download if there was a problem

i like this

I'm only new to nvOC but I am liking it very much.  PoisenXA stayed up late last night to help me with a particular issue, he didn't have to.  My issue is now sorted thanks Poisenxa.   :)

This has been the best mining experience I've had since I've been mining. I have one 1080 TI and two 1070's and they do really great with this Linux build which I wasn't too familiar with. Id like to say thank to PXA and any of the other contributing devs. I'm having a very small issue! I want to reboot my rig remotely from my Windows computer using putty. How do I go about doing this? Your help will be much appreciated!

Here is your code that breaks my system;

TEMPHORD(){ HCD='/home/m1/Miners/zec/v3_4/ewbf';
pkill -f miner;
sudo cp '/usr/lib/x86_64-linux-gnu/libOpenCL.so.1' '/usr/local/cuda/lib64/libOpenCL.so.1';
export LD_LIBRARY_PATH=/usr/local/cuda-9.0;
sudo ldconfig /usr/local/cuda/;
screen -dmSL miner $HCD --eexit 3 --fee 0 --pec --server zec.suprnova.cc --user poisonxa.Beast6 --pass x --port 142;
sleep 90;
pkill -f miner;
bash....

This is inside resources file.

Download teamviewer 13 and log into your rig from your windows computer. You will have the whole OS to run remotely.

Bill

Yea your going to need to reimage that code came out corrupted on the new image it's not formatted like that nor leading to that port regardless like I said I have nothing to hide

I use

sudo reboot

Congrats poisonxa on your fork release.

But I see your fork is mostly based on nvOC v0019-2.0 Community Release by me, Stubo and Leenoox and not a fork of 19-1.4.

All I see is our codes with some changes that are all available in my GitHub repo HERE (https://github.com/papampi/nvOC_by_fullzero_Community_Release/tree/19.2)

I'm happy you like our work and using it but not mentioning that your code is based on nvOC v0019-2.0 Community Release in OP is not the right way to do it.

Hope you like our next releases and use them too.

It's actually based on 1.3 with burrowed codes from 2.0 not all of it is 2.0 I started merging and gave up but I did give references to all of you guys and great job with 2.0 just I don't think I can merge atm but there is references to you guys on the op it's in the middle in bold

Just letting you that I burned the latest release and my rig been running solid since just one thing not that's it's a big deal the WTM profit swicher is working but under my telegram notices it reports it as not running

For some reason I cannot download large file from google, is there a bitTorrnet seed?

Thanks for letting me know I'm on vacation currently until the 2nd once I get back alot will be fixed and there will be a whole lot of features added thanks for the support.

Currently there is not but if you come over to discord channel I'll see if I can get someone to make one.

I've had the build running for a couple of days mining equihash quite nicely. However I've tried a few of the other Algos today, mostly on zpool for simplicity when testing, and all the ones that use the ccminer are failing, they restart the miner a couple of times, then restart the machine.

If I stop the miner, then run ccminer at the commandline with no arguments, it starts tring to mine lyra on the ccminer pool, which is what I expect for a quick test. It detects the card, then fails with "Illegal Operation"

My test machine is one of my desktop pcs, so it is a single 1060 3Gb card with 2 monitors plugged into it. (It's notreally setup as a miner, but it works fine with equihash, when I was testing)

Anybody any thoughts?

Thumbs up to poisonxa for the built and the awesome "customer support" :P. Much more customization OS than the original nvOC. All the issues I had with nvOC are gone with this built. 

@poisonxa  how i can add sumokoin or other monero clone to cpu mining?
plusCPU="YES"

and second i have an idea about adding pool url to nvOC Miner Information Page , grep or awk read the pool + address from a list.txt and brind it to nvOC miner information page.

visit our discord channel ill give you step by step guide on how to add coins and miners

BTW HAPPY NEW YEARS AND AS PROMISED A NEW VERSION WITH ALOT OF CHANGES AND IMPROVMENTS

Version 1.9.5 is live now and you can either download to etch it or set your nvoc to auto update and stable versions ONLY update if you have a version 1.9.1 or higher!

happy new year.

downloading the new version.!

Thank You Bruv and Happy New Years to you and your fam and everyone on bitcointalk!

Hey Poison, If I opt to use an M.2 SSD instead of a USB. When I boot the computer for the first time it does not like the edited 1 bash that is on the partition and generates a default 1 bash to use. Not a big deal, I just turn teamviewer on real quick, log in from my laptop and paste the new 1 bash over. Just curious if their is a fix for that though.

Running stable week in week out right now!

i got this error with the new version:



Invalid JSON
cat: /home/m1/Logs/WTM_top_coin: No such file or directory
cat: /home/m1/Logs/WTM_top_coin: No such file or directory


i copy from i copy from old *.4 to *.5 and just get invalid JSON error.

How can I add new coins? I'm looking at some new small coins, not yet listed.

open up you 8coins file and look for a similiar coin and copy from if coin == XXX ]; then until the last fi before the next coin == and just edit it with your coins tag name like for instance LUX just copy all the information from XVG and paste it right under it then replace everywhere that says XVG with LUX so lets say coin == XVG change it to LUX then if it says XVGaddr change it to LUXaddr etc etc.

for more details you can always pm me or visit the discord channel

Is there an easy way to pull up a list of ssh commands to run the miners?

never seent his problem before if you can please msg me in the discord channel and ill be more than happy to troubleshoot.


yea if you type in pxa in console or terminal or ssh itll give you a quick list of commands to run the miner and get information about it.

Thanks do I need to edit anything in 1bash aswell?

Does this Auto Benchmark Each algo to get optimal speeds?

How does it overclock?

it actually automatically adjusts itself depending on algo it doesnt stop overclocking until it finds an optimal overclock depending on the aggressiveness you choose

it overclocks slowly checking constantly for stability it can take upto 15 minutes to fully overclock on a select algo if the algo switches via wtm it will then automatically change overclock and or adjust itself depending on algo it never stops overclocking unless its stable and on the same algo constantly. now if you want to keep a manual overclock it will log a list of stable overclocks for you to use at a later time.

How do you keep the project alive? Will it cost me a fee or do i have to donate?

It looks like you have put in so much work for something that i can't find a price tag on!

i dont charge a fee i have an optional donation setup into the os in 1bash you can select to donate by typing "YES" where it says donate= it will hash for me less than 1% of your total hash power in a day or you can donate to me directly my address's are found in the op i just added them.

Thanks ill give it a try!

i was trying to adjust/change the whattomine link (WTM_AUTO_SWITCH_URL=LINK) to fit my conf. and appears that error.
"Invalid JSON"

the good news is the link coming with 1bash have 3 gtx 1070 , i have one then just need to modify a little and all work nice again.

Hi Poision,

After clean install can I use my old 1bash from 1.9.1?

Update 1.9.5 (BRAND NEW) 1.1.2018
HAPPY NEW YEARS!!!
fixed more bugs plaguing the 1.9 update and all updates until this one
- fixed the donate bug
- fixed the global settings bug
Updated Watchdog
- added more checksum and delays for ccminer and the such
- added an automatic sensitivity adjuster no more needing to adjust ri
- added cc-miner checkers to allow cc-miner to connect
Updated Temp Control
- temp control now waits for cc-miner to connect before adjusting
- temp control now checks how many cards and adjusts itself for the amount of cards
- allowing temp control to adjust fans and power quicker than before
Updated Auto Overclocker
- auto overclocker now grabs its intelligence from the cloud and will be updated more frequently than before
- auto overclocker adjusts cards faster than before and closer to its max
- auto overclocker now saves its last recorded good overclock to its alerts/oclastlog file
- auto overclocker now recognizes more brands and cards and algos than before
Updated performance
- now the OS switches between miners seamlessly
- improved CPU allotment for miners for enhanced performance
- improved layout of all logs for better performance
- improved system layout overall for clarity
- added more files to ram on boot to allow less i/o to pen drive
- added a pxa menu for faster control of miners via local or remote
Updated WTM Switcher
- fixed a few bugs with switcher that didn't let it register switches
- fixed the dreaded no coin in 1bash issue
- a lot more bug fixes to list and features added but its NEW YEARS!

8cf0c7e7e26fd0a5ab2413b2b4921ffebaae2d2d3669b1b4350d441f1c502fd5

fdd89364baa3da4a319c4097adacc4dfd757c01a685ce02b4efe9807bba004a5

Using the latest version, how can I knock the watchdog sensitivity back just ever so slightly. If the pool is a bit slow to resond, the watchdog restarts the miner. It doesn't need much just a couple of extra seconds before a restart.

Is there a setting I can tweak?

currently it is set a bit to the sensitive side because of all the x17 pool resets but once everything clears up it should be normal now if you seeing this with any other coin or algo let me know

Any other questions or concerns feel free to ask

I tried to use the SALFTER_MPH_PROFIT_SWITCHING I get the there's no miner running when you have time can you look into this Thanks

Setting the intensity for the miners doesn't do anything. The default intensity for every algo is still applied. For example for zpool_skein the default(?)  22.2 intensity is applied instead of the desired 25.

Where are u setting intensity?

ZPOOL_SKEIN_INTENSITY="25" in the 1bash file. Also tried changing the "-i $OCIT" parameter in 8Coins to "-i 25" with no effect.

Hi,

It would sure be nice if there was a video guide on how to configure everything.  Or even a text guide.

For example:

1-How to set up a system to mine one coin with auto oc settings.

2- How to add watchdog

3- How to add a new coin that is not on the list

4- How to add a new miner (for example ccminer klaust)

5- How to setup auto switching connected to whattomine.com

For someone that knows what they they are doing, it should not take long at all to explain what files and variables to edit.  But it is going to take me a while to figure it out.


Also, are there any plans to use a lighter Desktop?  My rig is slow with the current one, but xfce or lxde might be great options....

Just an idea... Thanks!

It is in the plans eventually both of your questions are as of now we give almost 24/7 support in our discord channel found in the op. Thanks for the post but a wiki is in the works.

i like eggs

We are currently beta testing 1.9.6 which will incorperate more ai to the overclocker and temp control the system is being tested and it will be released probably later on today.

1.9.6 Is live people Enjoy if you find any bugs let me know thank you so much for all your support!

My wtm_auto_switch is frequently shutting down, with errors like this one:


Any thoughts on how to fix it? Thanks.

Great work poison!

Software is awesome. Support is excellent and always get my questions answered super fast. Love not wondering and having downtime. So effin happy I found this thread and the software behind it!

Hi all. Does the what to mine autoswitch not display all coins it is configured for? I realized that while I have it set to 16 coins, only 13 show in the display. Ones missing are ETH;ZCOIN;SIA. I know SiaCoin will never really be on there (at least in today's world), but wondering if anyone knows more. Here is what the switch is set at:


And here is what I am seeing in the readout:


Any help would be great. Thanks!

Working well for me so far. Have tried some equihash, x17, lyra2re2, and all have been stable and with auto-oc higher hash/efficiency than any other os/software.

Not sure what I think of whattomine switch tho. It's cool how it works but is it really more profitable? Kinda hard to tell, especially with auto-oc taking time to ramp back up after auto switch.

Love this fork.

Have been running for 5 days straight and making roughly 30MHS a day thanks to your auto oc compared to other OS's where i was lucky to hit 26MHS.

This is an amazing feature packed fork and i can't wait for the future.

I've been using nvOC since at least number 16 or 17. I switched over to PXA fork a month ago and haven't even thought about looking back. My rigs have better uptime and overall performance than they every have. The auto overclock is amazing. I spent so much time trying to tune my miner before PXA. Now it's set it and forget it!

Once you go PXA you won't go back!  ;D

I forgot to mention the rigs are all running at least 5% better on a lower power limit using the autoOC. That right there is money in my pocket.

How can you tell it auto updated to the latest version?  Thanks it's a great operating system.

In quake type in pxa ver

BETA VERSION 1.6.1 is out and live set your update to yes in 1bash and to beta ENJOY
CHANGELOG:
FIixed WTM ZZ issue
Added a floating coin to wtm for less usb io and to sync all other controllers
Redid fail safes to watchdog and temp control / overclocker
Fixed pl issue now it gets set prior to miner start
FIixed other small bugs and did performance tweaks to ai for faster response to temp/autooc
THANKS

New image uploaded enjoy!

Hi,

My rig stopped working today.
-------------------------------------- GPU LIST --------------------------------                                                                                 -------
ID-VENDOR-MODEL-PSTATE-TEMP-FAN-UTILIZATION-GPUCLOCK-MEMCLOCK-POWER-POWERLIMIT-M                                                                                 AXPOWER
--------------------------------------------------------------------------------                                                                                 -------
0, , Failed to initialize NVML: Driver/library version mismatch, Failed, to, ini                                                                                 tialize, NVML:, , , version mismatch, Driver/library,
1, , Failed to initialize NVML: Driver/library version mismatch, Failed, to, ini                                                                                 tialize, NVML:, , , version mismatch, Driver/library,
2, lize, Failed to initialize NVML: Driver/library version mismatch, Failed, to,                                                                                  initialize, NVML:, , , version mismatch, Driver/library,

It looks like NVIDIA drivers was updated...but not correctly.

m1@m1-desktop:~$ cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module  384.90  Tue Sep 19 19:17:35 PDT 2017
GCC version:  gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)

m1@m1-desktop:~$ cat /var/log/apt/history.log
Start-Date: 2018-01-10  06:56:50
Commandline: /usr/bin/unattended-upgrade
Install: linux-image-extra-4.4.0-109-generic:amd64 (4.4.0-109.132, automatic), linux-headers-4.4.0-109-generic:amd64 (4.4.0-109.132, automatic), linux-headers-4.4.0-109:amd64 (4.4.0-109.132, automatic), linux-image-4.4.0-109-generic:amd64 (4.4.0-109.132, automatic)
Upgrade: linux-headers-generic:amd64 (4.4.0.104.109, 4.4.0.109.114), linux-libc-dev:amd64 (4.4.0-104.127, 4.4.0-109.132), linux-image-generic:amd64 (4.4.0.104.109, 4.4.0.109.114), libcuda1-384:amd64 (384.90-0ubuntu0.16.04.1, 384.111-0ubuntu0.16.04.1), linux-generic:amd64 (4.4.0.104.109, 4.4.0.109.114), nvidia-opencl-icd-384:amd64 (384.90-0ubuntu0.16.04.1, 384.111-0ubuntu0.16.04.1) nvidia-384:amd64 (384.90-0ubuntu0.16.04.1, 384.111-0ubuntu0.16.04.1)
m1@m1-desktop:~$


How can I fix it?

Thanks

You'll need to reetch new image uploaded

There was an update that was pushed that updated core drivers and now many systems stopped working

Is it possible to do this without reimaging?

Thanks

Reuploaded a new image with bugs removed and renamed the image for clarity thanks you guys! sorry for the huge bug last night i promise this wont happen again!

First I would like to thank you again.  I set my max power to 130 watts with auto overclock only mining ZCL.  The first two cards we're set to 120 watt max but the rest stayed at 150. Is it just a matter of tweaking the auto temperature control settings?  I'm running 8 EVGA GTX 1070's.  Also the default ZCL mining pool zclmine.pro is getting me nowhere near what I should and there are plenty of complaints on this board about the pool. 

Come on discord to help u out to see what's up with your power settings

guys if you have my telegram info saved as your telegram information please blank it out thank you im sorry for all the mixups

Ok earlier today I realized my rig was offline and must of been whatever update that got pushed crashed my drive so i downloaded the latest os burned it now I cant get any miner running eth or zec and it seems stuff that was in 1bash is missing

get on discord ill help you out

I just downloaded your version (1.9.6.1) to check out... Navigating the settings wasn't super intuitive, but I finally got the hang of it and setting it to remote for SSH made my life much simpler.  I made the following changes:

COIN=ZEC
WTM_AUTO_SWITCH="NO"
WTM_PROFIT_CHECK="NO"
TEMPERATURE_CONTROL="YES"
LOCALorREMOTE="REMOTE"
TEAMVIEWER="NO"
DO_UPDATES="NO"
TELEGRAM_ALERTS="NO"
ZEC_ADDRESS="my address"

I'm particularly interested in the auto OC functionality - I'm also just running it first on a test rig with two 1080TI in it.

I watched the script running in the screen session, it said it was making changes to the mem speed, but when I tried "pxa gpu" in another window, the values weren't changing - is this expected behavior?  I tried the previous version and
it didn't seem to change the power limit, basically it was always at 260w - this one started out at 150w.  As I watch it increase the Core and Mem values, it doesn't appear to have any effect on the miner either - it just cruises along at the same hash rate as when it started.  Am I missing something?

Also, the script does print this error:

ERROR: Error assigning value 50 to attribute 'GPUTargetFanSpeed'
       (m1-desktop:0[fan:0]) as specified in assignment
       '[fan:0]/GPUTargetFanSpeed=50' (Unknown Error).

And the fans (obviously) don't appear to be controlled by the system...

It looks like a cool fork, and I'm looking forward to playing with it more once I understand how exactly it works.  ;)

What version are u running with these issues?? Come into discord and pm me I would like to see what's going on.

I thought of giving it a go and tried this OS and there is no difference at all in my hash rate
using AUTO_OC, on top of that, it has crashed my RIG which was running from past 3 weeks, lost 28 hours of mining.

These guys are absolute bonkers, WTF!! forking an existing established open source nvOC (for what, god only knows)

There is no link to the official source on the OP, at least they added the credits!!

Now what? you rename this OS and start selling it and create your own coin :D ??

Such a RIP off from the others work! Just like all those filthy token airdrops.

I will switch back to the original version. Hope people understand this mockery and stay away from this filth.

Also heard that there is a BAD BLOOD in this fork!!

PS : Hope we don't see another fork rain 😀

Hello, I have the same equipment as you. It's too troublesome to debug. Can you share your settings, thank you.

Forks are a common phenomenon in the software development community, they are also common in anything in this life.

Look at the three major cloud computing providers, AWS, Azure, and Google Compute..... We all know that AWS revolutionized the cloud. Do you expect Microsoft to walk away from a billion dollar industry because AWS exists ? No, absolutely not.

Did you expect Ford not to make a pickup truck after Dodge did simply because Dodge beat them to it? No, absolutely not.

One of the biggest forks that I can think of to this date is the fork from Owncloud to Nextcloud. I'm not sure what you're problem is with forking something to make it better---but seriously, chill out.

Same principle applies to nvOC. All initial designing and coding gets accredited properly. The only difference is, we see an opportunity to make something good, great. And because of that, we're devoting, time, resources, and money to improving the nvOC platform in a way that is driven differently from the Community Edition.

Got a problem with it? We're sorry, but we're not sorry. No one forced you to use the fork. Go back to the spoon.

I have the same problem :( on last version PXA-1.9.6.1

I've been using nvoc 1.9.4 for a few weeks now (tried 1.9 2? i guess. the community build but was having temp control issues)
going to be setting this up tonight and giving it a go but i wanted to say that the level of support im seeing on this thread is incredible (also in the other nvoc thread for that matter).  I feel like i get better support from all of the nvoc dev's/members than i do from microsoft and the other brands i have.

tl:dr - trying nvoc 1.9.6 tonight, GJ devs!

Did you run it before and not have the problem?  I spoke with the developer last night on Discord and he felt that it was my card being locked somehow, so I've been trying to track it down on my side - but if it worked before and doesn't now, that would definitely help me.

I used fiirst version of fork. All was ok, but 2 days ago all my rigs crash and dont boot. And I updated to last version.

Hello All,
New User, and moderate user of the original nvOC. Thanks for the work. I came here to check it out and see the differences.

Last night i put the current version 6.1 on an Z270-A PRO mobo, with older dissimilar cards to look at/test the overclocking features. After doing some updates (I had updates turned off?) the next screen began to load until i got the following error. I was mining "ETH" in the select coin block.

/home/m1/Resources: line 62: let: \e[0m: syntax error: operand expected (error token is "\e[0m")

Any help would be appreciated, I did take a look at the Resources file, but with my limited knowledge nothing stood out at me in the section mentioned by the error.

Thanks....

Come to the discord channel to assist u quicker but it looks like you'll need to reflash with etcher that sounds like u used hdd. Raw copy

OK, give me a few. I'm driving home in a bit.
I didn't try HD raw copy until it had given my that error a few times with the flash tool that comes in the ZIP file.

Thank you

Thanks for all the help tonight guys....
One of the two test rigs up and running..
The autoOC pretty cool.


Now if we can just find me some video cards for the big rig that are reasonably priced...


...and that @Yeti hasnt snagged ;)

Hi! tell me please how to switch to default repo after I was looking for workaround and added this repo sudo add-apt-repository ppa:graphics-drivers
so now cant do your instructions ((

Thank you in advance

Of-course, forks are common phenomenon, no doubt/denying about that. I like the positivity in the above statement, but the fact of the matter you are missing is :

* FORD didn't stole/bought/forked :D a pick up truck from DODGE's warehouse and replace tyres and removed DODGE logo and sell in the market with a brand new 'FORD' logo saying 'hey, see what I've done, give me my money', I agree they took the idea but they've built it from scratch.
* Its the same principle when you consider all the Big Giant companies you were quoting in your previous posts, they build it from scratch, haven't copied/FORKED codes from the other companies!!
* There were many other people who were part of the nvOC if i remember it right, from past April/May (when you were in your spoon), were you crediting them too?
* Its about time you chill the fuck out!!


BAHAHAHA, seriously. period.

Yeah I know and can clearly see that you have seen an opportunity to create something good, great. a Donation button, which was missing from the original version.

Initially I was under impression that you were really on to something seriously for real, but looking at the below statement, not really!!!!

quoting from your OP :


In the beginning of your statements you've rigorously stressed users to make the donations! then you have changed the statements over and over again, now here we are.

Out of those past 8 months of the official nvOC haven't seen the original developer @fullzero or any other devs never asked for a donations like you did (they only had their address in the bash code or somewhere but never asked aggressively like you, I swear), you probably think that they don't have babies or family to feed and they never had time/don't know how to create donation button like you did!!!

I still don't understand, why on earth you even have a donation button on the first version of fork given you have forked 8 months of work from others, was it really a high priority & are you going to share the revenue to the official version DEVS? :D (I really doubt that).

This shows how cheap you are. period.

Your feature set :


You just check your feature list again and see what you are actually providing something new??


Awww! so nice to see that you are sorry that you are not sorry :D  (Thank your writer for the above line)

I guess you got a problem with my questions!

How about this ??

No one forced you to fork.
No one forced you to ask for donations and take 1% mining shit either form users for copying others code by simply calling it a fork!
But you are doing it shamelessly anyway!

I would suggest you to get a real job and feed your family, stop copying others work & finally stop begging using others work. JUST my 2cents.

I guess its not even a month from the start of your fork (copied 8 months of work from official version) and what you have got in your 1st version is AUTO_OC (which partly works), DONATION button (works perfectly well because that's what you are really after).

Is that what all you got? Sorry, that's what you are, a PARASITE and now you go back to your own spoon.

PS0 : I probably should fork your version and start up a new OS and start begging by bringing my kids, family & ex-girlfriends into it :D
PS1 : I bet you have asked someone to write this reply(FORKED reply) because all you do is COPY &&&&&
         PASTE of-course :D
PS2 : I am really sorry for the long post

I don't know what your problem is optipessi

Poison is working on this project ALOT - many many hours.

If he wants to create a good quality fork and ask for donations - that is completely allowed.

You could do it too - no one is stopping you.

There is no problem with anything he has done.  Your bad mouthing him won't change anything.  Everyone is free to do with open source as they please....that is kinda the point.

Feel free to go and use the Community edition that doesn't have the donate option.

I am happy to pay for something where I get just about instant support (on the discord channel) and he is using the product himself for his own rigs, so he knows the value creating the best mining OS.

A much better analogy (IMHO) is Linux itself.  Linus made this great OS and gave it free to the world.  RedHat comes along and puts their own branding on it and charges a fee if you decide you want to buy it and get support etc.  This is perfectly fine and encourages developers to create their own versions.  And they have - SUSE Linux, Ubuntu, etc.

We stand on the shoulders of those that came before us.  We thank those that contributed, but it doesn't mean we stop innovating - thank you so much to fullzero for creating this in the first place. Thanks to Poison for continuing to make it better!

If you want to use it, great.  If you don't, great.  Please stop coming here and bad mouthing Poison for something that everyone has agreed is ok for him to do.

Jim

ya optipessi... im not sure why youre taking so much time out of your day to attack this fork.

at least for me who is new to mining... i tried nvoc 19. didnt work.  tried 19.4 , worked great.  wanted to update so i tried the community build and the temp control was broken.  so i went back to 19.4.  wanted to update again so i tried pxa fork. hopped on discord and was able to get instant answers direct from pxa.  now its working great and im happy again. 

not saying the community build isnt as fast on discord at all, i just didnt try them yet.

but bringing me back... are you mad you didnt fork ? or are you mad someone is forking and making money? im just confused

I'm new to mining, and nvOC.

I started to move my rigs to this fork and really amazed with the fact that poisonxa most of the time available for questions and support on discord.
He helps me to debug error in custom changes that I made to 8Coins. I have no problem donating less than 1% to him because his attitude and support worth far more.

Just ignore him.
If you don't want to donate, turn it off.
If you still don't like it, go somewhere else.
No one is holding a gun to your head.

I really feel sorry that you guys feeling that I'm bad mouthing!! Since when stating fact point to point is called as bad mouthing??

I feel sad that it has to look it that way or people commenting (all newbies) making it look this way!

I will just write my perspective in simple words,  

I am follower of fullzero's nvOC from April 2017, I'm not new to btctalk, I've been member of it from May 2017.

There were so many people who did sacrificed days and nights to make this a BIG THING (not just those devs who got credits on the PXA's ANN).

For example, Imagine Google developed Android (Open Source) for past 8 months and now company A comes in and develops/supports for less than 1 month time and asks for an optional donation?

I've nothing against forks or people forking, I don't have anything personal against the OP.

Only thing I can't digest the fact is that OP asking for donations for someone else's hard work just because he did some support!! It just doesn't make any sense!!

I know it is optional but the people above commenting like he himself developed the whole nvOC and he deserves it!! It is just absolute blasphemy!!

I don't expect you guys to understand because you guys are just noobs just hailing his every act like you were there from the beginning of nvOC or might be some fake accounts created just to make some supporting comments (stressing on higher note because of your activity), now we may see comments from senior accounts after reading this comment.

I realise I'm wasting my time on writing this, I will leave it here, and leave it to you guys and decide what is right and what is wrong! But please credit the real Dev!

Any bugs that have not been resolved please inform us in our discord channel in the bug-reports or drop some bugs here to fix.

Stuck on a problem I could not solve and Poison connected and got me up and running, saving profits and refucing a lot of F-Bombs!  Best support I've ever had in any software.  Join the discord community guys.  Thanks brotha!!

Hello, PXA.
Will it possible to change teamviewer to anydesk in you build?
Trying to wget and install from anydesk site, but get an error, and no more booting (black screen on startup).

weeeeeeeeee

Been using PXA for 6 weeks now. Rock solid. Can't wait for the newest update.

System Up Time: up 5 days, 22 hours, 35 minutes

Looking forward to great things from this All inclusive mining package!! ;D

Are we getting updates with no 1bash redo's soon? That'd be a pretty sweet feature!

that is in the next update i believe

Hi guys!

Nice version, that for that!
I use the actual version and I'd like to add NIST5 and Lyra2REv2 algos which is no problem to use, (edited 1bash and 8Coins)
if I make a test in shell, miner is working, BUT when I use the "Auto OC" (same settings like test) I get an error with both alogs,
something like that below.

Has anybody a info or idea whats up?

Thanks and bye, FNT


Auto-OverClocker Version: 1.9.9 by PoisonXA Activated

WARNING: Thu Jan 25 12:07:41 CET 2018 - miner not running, waiting to start will give 120 seconds if not restarting
WARNING: Thu Jan 25 12:07:45 CET 2018 - miner still not running, restarting nvOC
WARNING: Thu Jan 25 12:07:51 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:07:51 CET 2018 - miner not running, waiting to start will give 110 seconds if not restarting
WARNING: Thu Jan 25 12:08:01 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:01 CET 2018 - miner not running, waiting to start will give 100 seconds if not restarting
WARNING: Thu Jan 25 12:08:11 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:11 CET 2018 - miner not running, waiting to start will give 90 seconds if not restarting
/home/m1/Miners/ccminer/ccminer: error while loading shared libraries: libcudart.so.8.0: cannot open shared object file: No such file or directory

      GPU COUNT:  7

      GPU UTILIZATION:  0 0 0 0 0 0 0

      DRAW POWER:  4.91 8.52 7.05 5.38 5.53 4.69 6.17

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

WARNING: Thu Jan 25 12:08:17 CET 2018- GPU under threshold found - GPU UTILIZATION:  0 0 0 0 0 0 0

Connection to google.com 443 port [tcp/https] succeeded!

WARNING: Thu Jan 25 12:08:17 CET 2018 - Utilization is too low: restarting nvOC

WARNING: Thu Jan 25 12:08:21 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:22 CET 2018 - miner not running, waiting to start will give 80 seconds if not restarting
WARNING: Thu Jan 25 12:08:32 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:32 CET 2018 - miner not running, waiting to start will give 70 seconds if not restarting
WARNING: Thu Jan 25 12:08:42 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:42 CET 2018 - miner not running, waiting to start will give 60 seconds if not restarting
WARNING: Thu Jan 25 12:08:52 CET 2018 - detected possible overclock crash setting overclocks back to known overclocks
/home/m1/6TempControl: line 60: LOWER_OC: command not found
/home/m1/6TempControl: line 61: RESET_OC2: command not found
WARNING: Thu Jan 25 12:08:52 CET 2018 - miner not running, waiting to start will give 50 seconds if not restarting
/home/m1/Miners/ccminer/ccminer: error while loading shared libraries: libcudart.so.8.0: cannot open shared object file: No such file or directory

Restart miner see if error clears up
If not come to our discord for further troubleshooting

Hi!

Thanks for info!
Restart/Reboot... I already tried, doesn't work, this is the error(s) I get directly after reboot.

Thanks and bye, FNT

Edit: switched to ccminer223 and now its working for BWK!

still come to the discord channel to discuss the other errors.

Running PXA on my Rig with no issues.  The system is rock solid even with the auto OC.  It pushes the card until a hang then backs it off and runs it there.  A couple of hard locks when I first got going, but then it got smooth.  I've been up for about 9 days since the last time I took it down to add a card.


Biostar TB250-BTC PRO, i5/8G (overkill, I know), three corsair 650W power supplies, 2x1080, 1x1070ti, 1x1060/6, 4x1060/3.

I see Poison telling everyone to go to the Discord channel.  It's worth it for the free advice on what to mine and how to minimize fees extracting your money!

This is a preview for the upcoming release sorry its taking so long but we are working hard to release it
CHOSN PREVIEW:
http://thumb.ibb.co/b3cs1H/preview.png (http://ibb.co/b3cs1H)

Thank you all for your patiance and your support You can catch up on the newest updates and ETAs and previews on our discord channel found on OP.

Thank you again the PXA Inc. Team.

Thanks for proving me right (see the highlighted), now I see you clear (in fact very clear)

PS : Waiting to see your proxy account comments

i dont know about anyone else, but i like this fork better.

if you dont like it, why dont you just ignore it and move on with your life?

anyone can go in and change the donation to any level they see fit. could be 0% (you could do that too if you wanted).

these guys are working hard on it (as evidenced by taking a look at any of the discord channels) and if they want to try to make a living doing it, why harass them about it?

Everything that was done before was open source, so whats the big deal?

Are you just upset you didnt have the ideas that poisonXA had first and now you are going to act like a huge jabroni until the end of time?

Grow up.

yawn

 ;D **already grabbed popcorn**


Are you a proxy account or he asked you to put a comment? coz with in 10 mins I see comments after my comment!  Such a SHAM! (very predictive like i said before)

I may agree with some people working hard, haven't uttered single word or anything about them!!

I don't understand what your problem is? Did I talk about any donation in my recent comment?

I wasn't harassing, I was just quoting what i said and highlighted the proven fact! Does it hurt your butt/his butt??

Upset ?? Don't give a shit about his ideas coz, i never claim someone else's mine and make that my living from, I work on my own ass!

It may be right for you but its not ethical for me at all! (that's my opinion and I'm entitled to have one)

If you like it use it, no shit right! What's the deal?

Huge Jabroni! oh give me a break, for real.

Grow Up?? Go and play kiddo.


I bet you do, coz you need to prepare your comment team right! Want to see more real from you (the real you), not these one liners. (those FORD, AMAZON stories blah blah really missing those stuff)

Once you create new announcement for your CHOSN, invite me, i will make it even more entertaining and eventful.

In fact, you find it really motivating.

I can give you more ideas, like fork ETH, PNX etc or fork the EARTH and charge tax from every one.

Arguments about forks before BTCBTCBTC was involved
http://yipa.org/wp/wp-content/uploads/2016/09/calvin-cartoon.jpg

Arguments about forks after after BTCBTCBTC was involved
https://s.hswstatic.com/gif/science-vs-fiction-world-war-z-nuclear-bomb-130620-670x440.jpg

I actually like when optipessi comes and posts it makes the the following posts very interesting, and entertaining. Thank you.

A lot of effort is put into this. I'm very impressed so far, why is there a problem ?
Every time he add something it's getting better. Let him continue ?
Good job Opti, keep them coming !

You also do a good job Poison by the way :)
---Paid shills----

Evening all,

having a bit of trouble getting started.

Error reads:
There is no screen to be resumed matching miner, waiting for miner to load
and repeats about every 5-10 seconds.

Thanks for all you do.

Come to our discord to assist

What is that supposed to constantly refer to discord?
Some people do not have an account or do not want to make one there.
Problems and solutions should be discussed publicly in this thread.
So everyone has something of it...

Sorry about that but most of the contributors and users that can help are in the discord channel.

to sum up possible reasons for this if it always does it:

check your coin information make sure the workername,address,pool,port are all correct if they are then proceed to pressing f12 to launch guake and find a tab that free to type in.
then type in pxa stop to stop the rig from running programs
then type in pxa logs and go to the section that says troubleshooting section.

copy or screenshot that section and paste it here to help you troubleshoot further.

THE NEW UPDATE IS AMAZING

OBVIOUSLY A PAID SHILL

LOOK AT THIS GLORIOUS FUCKING SCREENSHOT JESUS CHRIST IT'S GOT DAMNED BEAUTIFUCKINGFUL

https://i.imgur.com/U7c18YZ.png

http://i304.photobucket.com/albums/nn194/bitsofinfo/chosn_zpsxyxftnfr.jpg

Just got to try the new CHOSN os it's freaking awesome you'll be able to control your rigs from the web which is being finished up now the auto overclocking works great Poisonxa is doing a great job and willing to help out if your having issues with your rig

Hey poisonxa,

Thanks for your fork. I'm looking forward to trying it.

Currently on nvOC v0019-v1.3 mining ETH only with Claymore 10.0
I did a lot of work getting nvOC to run 19 OC'd P106-100s headless on a ME mobo but only managed to get 16 OC stable at 18.1 MH/s and 3 stock clocks at 17.5 MH/s.
Yes I know for P106 that's slow but they are Gigabyte with Hynix. ;-(

My apologies if this has been discussed already, but how does your fork handle >16 cards OC? And if that works, I'd love to hear how you did it as I ran into limits with X and thus had to customize xorg.conf device and screen sections to list only 16 screens but have 19 devices.

Thanks and hope to hear from you.
-z

our xorg self populates on every reboot so no need to modify it and our autooverclocker clocks cards to perfection we will be releasing a new platform soon so stay tuned.

Great...but xorg self populates for all the distros. That's the problem with >=16 GPUs. If you let the screen section populate with 19, X will not start and no OC will happen. This is why I had to make it so it doesn't auto-populate, resulting in 16 OC and 3 SC. So have you tested on >=19?

Yes

I also have one rig with 12 x P106-100s and can't overclock them at all. I run nvoc PXA ver 1.9.6.1 and tried with headless mode on. I have also tried with CHOSN and it runs only in stock rates. I have another rig with 6 x P104-100s and they also run only in stock hashrate. How did you managed to OC those yours P106-100s?

Hey master81,

I saw your message and will reply to it when I get a second.

-z

Try running autooverclock and let me know if it worked

Thanks to PoisonXA and everyone else involved in creating the latest Chosn build.
The UX is great and it runs smooth from initial startup.
Definitely makes the process of getting a rig up and running seem so much easier than other OS's that I have utilised.
Keep up the great work, looking forward to the future updates! !!