|
Title: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 02, 2018, 08:10:53 PM Hey guys
Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: thierry4wd on October 02, 2018, 09:46:17 PM Hi, that makes me look nice! I nevertheless "find" a problem, in the "set-miner-config" ...
Code: cp /www/pages/cgi-bin/minerConfiguration2.cgi /www/pages/cgi-bin/minerConfiguration.cgi -f This will just erase the new configuration page once "apply" ... a simple oversight? As far as I'm concerned, I'm looking forward to the Bmminer for T9 + because it's actually exactly what I'm working on now, because of the decreasing voltage variant with freq, I'm limited to 12.5Ths stable in overclock (1400W at wall). Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: alex1560 on October 02, 2018, 09:52:35 PM Hi,
It's just one minerConfiguration.cgi in the package because there are 2 files the same, but with different name. I replace both files on the miner. For T9+, I tested and foltage setting works fine. I set it to 675 mhz and 920 mv for now to see how it holds. I think 930 or 940 is the hardware limit set on the pic as well as on the s9. Will post an update to this thread when it's live. Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: thierry4wd on October 02, 2018, 10:16:13 PM What conssomation?
my T9 + test indicates Code: Fix freq = 643 Chain [1] voltage_pic = 28 value = 820 perfectly stable at 7.9Ths and 0.0003% hw (only 2 hashboard) and 920W Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: dutchlincoln on October 03, 2018, 07:59:51 AM looking great!
is the T9 available yet? cat it oc as well to 14TH? Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: alex1560 on October 03, 2018, 01:02:30 PM looking great! is the T9 available yet? cat it oc as well to 14TH? Hi, I am still running stability tests of the bmminer, I don't think running at 14 TH/s will be ok for T9+ with regular cooling, so far I run it for 2 days on 12.3 TH/s with a freq of 675 . With 675 MHz it stays at 83 Chip temp, which is resonable. I did not do any consuming tests, as this is not usually my thing to do, the clients tune their machine by their environment, hashing rate required, wattage etc. I will post an upgrade soon which will include T9+ firmware and a config to switch between which miner you want to deploy. Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: digital$ on October 03, 2018, 05:11:58 PM Hi, I am still running stability tests of the bmminer, I don't think running at 14 TH/s will be ok for T9+ with regular cooling, so far I run it for 2 days on 12.3 TH/s with a freq of 675 . With 675 MHz it stays at 83 Chip temp, which is resonable. I did not do any consuming tests, as this is not usually my thing to do, the clients tune their machine by their environment, hashing rate required, wattage etc. I will post an upgrade soon which will include T9+ firmware and a config to switch between which miner you want to deploy. very nice...thanks for your contribution to mining community! Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: thierry4wd on October 03, 2018, 08:19:45 PM My experiance on 2 x T9 + is:
675Mhz - 810Mv (display in kernel log) and about 12.4 Ths for 1400W at maturity Strongly your Bmminer that I can adjust the voltage! because to mount the Freq does not give good result because the card hash moin quickly ... https://nsa39.casimages.com/img/2018/10/03/181003103711543667.jpg Title: Re: Overclock Antminer S9 - Deploy Tool and access to set freq, volt, fan disable Post by: alex1560 on October 03, 2018, 11:38:41 PM My experiance on 2 x T9 + is: 675Mhz - 810Mv (display in kernel log) and about 12.4 Ths for 1400W at maturity Strongly your Bmminer that I can adjust the voltage! because to mount the Freq does not give good result because the card hash moin quickly ... https://nsa39.casimages.com/img/2018/10/03/181003103711543667.jpg Title: Antminer Overclocking & Deployment Tool Post by: offordscott on October 04, 2018, 11:12:45 AM Alex, thanks for providing this to the BTC Talk community.
Title: Re: Antminer Overclocking & Deployment Tool Post by: alex1560 on October 04, 2018, 11:48:43 AM Alex, thanks for providing this to the BTC Talk community. Hi, You are welcome! let me know if you find any problems while using it. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 02:41:30 PM Great! so, if I understand correctly, can not change the voltage via this BMMINER for T9 + but only the ratio "voltage / freq" has been changed?
in addition, your BMMINER for T9 + thus brings the freq control, and the deactivation of the fan check? I'm just going to take the BMMINER and the configuration page and test all that to see how it's done;) Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 05:00:23 PM I tested this for T9+!!! but ... i'm sorry, big problem, PIC SW error see :
Code: Miner Type = T9+ i restored my board with my PicKit3 Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 06:36:52 PM I tested this for T9+!!! but ... i'm sorry, big problem, PIC SW error see : [...] i restored my board with my PicKit3 Hi, It seems that you did not read nor the post nor the read me file. You deployed with the config left for S9. I plan to add a check for the miner version and choose bmminer automatically, but I will implement that when I have some free time. For now you open config.txt and for minerversion type T9+ Great! so, if I understand correctly, can not change the voltage via this BMMINER for T9 + but only the ratio "voltage / freq" has been changed? in addition, your BMMINER for T9 + thus brings the freq control, and the deactivation of the fan check? I'm just going to take the BMMINER and the configuration page and test all that to see how it's done;) Hi, no, you can change voltage and freq independently, you just need to be more careful with the readme files delivered with this kind of scripts. Good luck! Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 06:57:11 PM Thank you I know lol I'm not at my test shot on the minor, I'm also in hardware! ;)
on your tweak, i did not run the "bmminer-deploy.exe" but i just copy the "bmminer-t9 +" and "minerconfiguration" on my minor, i got the config page, i take 700mhz and 870mv ... But that did not work, I took care not to use the bmminer-S9 but beautiful and well the T9 + bmminer;) Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 07:04:49 PM Thank you I know lol I'm not at my test shot on the minor, I'm also in hardware! ;) on your tweak, i did not run the "bmminer-deploy.exe" but i just copy the "bmminer-t9 +" and "minerconfiguration" on my minor, i got the config page, i take 700mhz and 870mv ... But that did not work, I took care not to use the bmminer-S9 but beautiful and well the T9 + bmminer;) not sure what to say, I did that tool to avoid doing this kind of support because there are some steps which must be followed when copying these files, permissions set etc. Someone on my discord channel got it overclocked to 13.7 using same files, also had issues before using the deploy tool. The guy on discord used 750 frequency, but temp was 100 deg, a bit to much I would say. Let me know if you manage to do it, I am sure you would find a way eventually if you don't want to use my tool. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 07:09:00 PM it's more than 3 months that my T9 + turn at about 12.5Ths without problem, I had tweak this minor since long time: p
so I prayed the Bmminer T9 + that I copy on my minor, I also gave him the right to know rwxr-xr-x ... I do not see where the mistake is ... anyway it is absolutely necessary to execute your deployer? Did I miss something ? I must recognize that the possibility of changing the tension of your bmminer greatly interests me: p Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 07:17:49 PM it's more than 3 months that my T9 + turn at about 12.5Ths without problem, I had tweak this minor since long time: p so I prayed the Bmminer T9 + that I copy on my minor, I also gave him the right to know rwxr-xr-x ... I do not see where the mistake is ... anyway it is absolutely necessary to execute your deployer? Did I miss something ? I must recognize that the possibility of changing the tension of your bmminer greatly interests me: p Do a search on youtube for my video where I show to build the bmminer and how to install it, I am not sure if I am allowed to post youtube links on this forum, but you should be able to find it easy enough. The tool was made for mass deploy, so for 1 machine I guess is not really needed if you know what you are doing. It's helpful to learn anyway what needs to be done. I guess you renamed bmminer_t9+ to bmminer . Also, you can try with one board if you are unsure of your results, maybe you have a different T9+ miner, who knows. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 07:22:52 PM yes;) it's already what I did:
Before i connection only hashboard for test 1 - remove original Bmminer 2 - copy Bmminer-T9 + 3 - rename to bmminer 3 - Attribution of the right attribute 4 - replace minerConfiguration.cgi 5 - delete from minerConfiguration2.cgi (if in doubt) 6 - in page configuration, modified the value and apply and after you know more ... Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 08:25:46 PM yes;) it's already what I did: Before i connection only hashboard for test 1 - remove original Bmminer 2 - copy Bmminer-T9 + 3 - rename to bmminer 3 - Attribution of the right attribute 4 - replace minerConfiguration.cgi 5 - delete from minerConfiguration2.cgi (if in doubt) 6 - in page configuration, modified the value and apply and after you know more ... In my newer version I added a set_miner_conf.cgi to setup the extra veriables I added to turn off or on voltage setting, that must be added otherwise it will not write properly the config file. There are some files which you did not copy/set. I am not going over the entire logic of the tool, as the purpose is not to teach others to program or how to make their own tools for this. This bmminer file is made to include new interface variables. If you want your own bmminer, stripped of the interface stuff, you can use the video to build a bmminer and set things inside bmminer then build every time you want to change a value. Hope it makes sense. Spend a little more time with this if you want to do it your own way then in 1-2 days can post your solution, we are crowding this topic already. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 08:28:20 PM yes i know, i also copy the set-miner ....
I understand, you do not have that to do to explain how to do and this is not the subject here;) I will try your method ... with your application deploy ...;) Edit : i try this ... i past the log : Code: C:\Users\xxxx\Desktop\Firmware antminer D3 et L3+\Unlock T9+ S9 bmminer>bmminer-deploy.exe Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 10:01:41 PM I would suggest trying in a more friendly path location, without xxx spaces and others. And run the .bat file after setting the config file.
You can place it in D:/bmminer-deploy or something like this, see if you still get an error. Which windows you run it ? I work with windows 10. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 04, 2018, 10:49:22 PM the spaces are the result of the translator (I'm french)
the xxxx are my masked name (I'm stupid lol) I just decompression in a folder, configure the "ip_list.txt" with the ip address of my minor 192.168.1.xx and inform minerversion = T9 + in the "config.txt" And run in admin mode the deploy.bat, i run with windows 7 pro I think the problem comes from your software that will look for the DLL ==> AppData \ Local \ Temp \ _MEI23962 \ python36.dll ' but it does not find it because I do not have it ... and it's not a common file for DLLs ... I'm wrong? Off topic but a question ... your bmminer-deploy.exe does 8MB? it seems huge to me for simple scrypt .... Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 04, 2018, 11:26:38 PM I think the problem is windows 7 not having some libraries to load this. This script is made with python and compiled, it contains all the libraries needed to run ssh commands and python it's self, which is about 7-8 MB,
that's how python gets compiled to run as an .exe . We plan making this in a different language in case we decide to make this in the end a project to focus on, it will be smaller in size when done in c# or c++. You can also try running this as Administrator, see if it's doing any difference. Will install a VM in the following days to test on other windows versions, as I am working with win10 and it's where it's compiled on. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 17, 2018, 02:43:13 PM Hi, I finally managed to get an S9! and I tried your mod, and for the S9 it works perfectly (I only recover the files)! play well;)
The only downside, the reporter's temperature seems much higher than the reality ... and moreover the fan-fixed operation has been removed? Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 17, 2018, 10:15:19 PM Hi, I finally managed to get an S9! and I tried your mod, and for the S9 it works perfectly (I only recover the files)! play well;) The only downside, the reporter's temperature seems much higher than the reality ... and moreover the fan-fixed operation has been removed? in my test, I also flash firware S9J on my S9 13.5, and pushing the minor on the frequencies, the kernel displays voltage - 454? at take it will seem that it runs under 900mv I pence, and rises very easily at 16Th;) But this is only for information;) Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: jfaubin on October 23, 2018, 10:33:53 PM Hi Alex,
I have problems with s9i 14 TH. The temp chip comme to 99 and 100. Before the update, the temperature is 72 to 74. I restore bmminer.conf, *.cgi files and bmminer executable and the s9 come to 72. Did you have this problems with S9i? Thanks a lot! Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 23, 2018, 10:44:22 PM Hi Alex, I have problems with s9i 14 TH. The temp chip comme to 99 and 100. Before the update, the temperature is 72 to 74. I restore bmminer.conf, *.cgi files and bmminer executable and the s9 come to 72. Did you have this problems with S9i? Thanks a lot! Hi, there have been some issues with newer miners than the source code available on github. I am working now on a version which is going to be compatible with any miner version, including the latest so called "asic boost" low power firmware which is just released. From what I understand it might be no time soon source code available, so I have found a workaround on setting frequency, voltage and will try disabling fans as well. I am still trying to figure if there's any asic boost at all in the latest firmware or if it's better power management combined with different algorithm of communication with the pool.. Anways, will keep you updated. Unfortunately I will be charging for the next firmware update because of the complexity of the task. Join discord to stay updated : https://discord.gg/VugHH8 Alex Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: jfaubin on October 25, 2018, 02:07:17 PM I Alex, your dicuss threads not work. Do you gave another new threads? What is your username in discuss? Hi Alex, do you have an update? Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 25, 2018, 04:34:03 PM Hi Alex, do you have an update? Hi, yes, please send me the firmware which was working for you and will send you a patching file containing that firmware. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: reza312000 on October 26, 2018, 11:39:02 AM Hi, yes, please send me the firmware which was working for you and will send you a patching file containing that firmware. I was able to overclock the miner from outside the bmminer, Freq and Voltage. Right now I did it for the Asic Boost firmware from Bitmain. Here's a link: http://torrent-miner.com/tools/Antminer-S9-LPM-20181023_OC.tar.gz I am working on disabling fan check, but for those interested on that, get in touch on discord or PM as that's not going to be released for free. I used for t9+ but not connect to pool and burn 17 asic😭 Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 26, 2018, 03:21:20 PM I used for t9+ but not connect to pool and burn 17 asic😭 Hi, sorry to hear that you are having issues, the first firmware deployer is for S9 and T9+, the last update was posted for the user which wanted to try a different firmware.. Perhaps I should start a new thread to avoid this kind of missunderstandings Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: reza312000 on October 26, 2018, 03:37:22 PM http://s8.picofile.com/file/8340967868/Screenshot_20181026_190430.png
Can i repair? Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 26, 2018, 03:55:33 PM http://s8.picofile.com/file/8340967868/Screenshot_20181026_190430.png Can i repair? There are some repair shops around, check the forum for that. The thing is that the s9 firmware should not start the on the T9+, at least the ones I did before, this one is from bitmain, so maybe they changed stuff.. Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 29, 2018, 05:26:13 AM thank you works smoothly You are welcome! I have some users which said it did not work for them, but I think they did not set the voltage for their machine, and some machines won't start with the default set by bmminer or something.. Trying to figure out what is their issue. Good luck! Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: dutchlincoln on October 29, 2018, 08:39:35 AM And what are the results?
Hashrate/freq/power usage? Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 29, 2018, 03:43:31 PM I try this on my S9 13.5Th, by flashing on interface web.
Freq and asicboost work perfect ! but not voltage :( ... I set 700mhz and 900mv and apply , the miner boot correctly at 700mhz but 870mv ... Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 29, 2018, 07:28:59 PM I try this on my S9 13.5Th, by flashing on interface web. Freq and asicboost work perfect ! but not voltage :( ... I set 700mhz and 900mv and apply , the miner boot correctly at 700mhz but 870mv ... Hi, the voltage and freq is being set from outside bmminer on this version because of the closed source code which was not released yet, you are not going to see in the logs of bmminer saying the voltage. You will see a message called Custom Overwrite set pic voltage=%d on chain[%d] where the logs for bmminer starts after it finished booting. The nice part of this firmware mod is that it should work with any version of bmminer, just replace the single-bard test file (and the interface files) on your regular firmware and is going to overclock voltage and freq, making it easier for those antminer s9 versions which were not compatible with the open source firmware. Alex Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 29, 2018, 11:05:05 PM ha !!! All my excuses, I saw in the kernel that the tenssion did not change, so I did not bother to continue my test: s
On the other hand, after many tests, I am happy to say that I just finished my code which works perfectly , I manage to take the control freq, fan, and tenssion, all with the right temperature card, and everything is well displayed in kernel log !!! I'm happy: p but your LPM OC deserves that I look more closely !!!, if this is independent of BMMINER, then it should be compatible T9 +? without copying bmminer of corse;) I always try to increase the tenssion on a T9 +;) Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 29, 2018, 11:27:04 PM ha !!! All my excuses, I saw in the kernel that the tenssion did not change, so I did not bother to continue my test: s On the other hand, after many tests, I am happy to say that I just finished my code on "set-miner-config" and "minerconfiguration.cgi" which works perfectly with a BMMINER of ogirine, I manage to take the control freq, fan, and tenssion, all with the right temperature card, and everything is well displayed in kernel log !!! I'm happy: p but your LPM OC deserves that I look more closely !!!, if this is independent of BMMINER, then it should be compatible T9 +? without copying bmminer of corse;) I always try to increase the tenssion on a T9 +;) Glad to hear you work on your version as well. Let me know how your version works, it's indeed nice if you can set it just from the minerconfiguration.cgi, I did not check that as there are some funky ways of setting voltage on the PIC. Does your version work with LPM as well ? Good luck! Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 29, 2018, 11:41:19 PM Not LPM ...
I just work a few hours (to find the apel code), the advantage , so compatible with any hashboard (i think), on the other hand, I tried my mod, but with another BMMINER, but that does not change the tenssion ... I am currently running a 13.5 to 15.3Th / 1600W / 725mhz / 900mv Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on October 29, 2018, 11:52:08 PM Not LPM ... but I use the last official BMMINER of an S9 without changing it, and he finds, by chance, he accepts the change of tenssion! : d I just work a few hours (to find the apel code), the advantage is that the BMMINER is the last, so compatible with any hashboard (i think), on the other hand, I tried my mod, but with another BMMINER, but that does not change the tenssion ... I am currently running a 13.5 to 15.3Th / 1600W / 725mhz / 900mv In my tests I was using 675, getting ~14.2 with 1350W and 890mv on a 13.5 old machine on antpool or btc.com, slush doesn't like LPM yet. The wattage varies from machine to machine, mainly lower Voltages will use less power. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on October 31, 2018, 11:09:20 PM Hi ! i tested your firmware, but i'm sorry din't working for me... only 11 200Gh/s at 725mhz and set 900mv :(
no subject, i continue to dev my code, and now i'm ready to change voltage by 5mv .... for exemple i tested 885mv, 890mv, 895mv and more ! well done ! perfect working ! and show on kernel log (and verify by my power plug counter) Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 01, 2018, 12:01:23 AM Hi ! i tested your firmware, but i'm sorry din't working for me... only 11 200Gh/s at 725mhz and set 900mv :( no subject, i continue to dev my code, and now i'm ready to change voltage by 5mv .... for exemple i tested 885mv, 890mv, 895mv and more ! well done ! perfect working ! and show on kernel log (and verify by my power plug counter) Ya.. it's triky to get it working on some machines, needs debuging when is not working. We usually do a lot of tests for the farms we work with on deploying custom firmware. Good luck with your code! It's always the best to choose the tools that works for your case as what worked for others might not work for you. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on November 01, 2018, 12:11:19 AM yes i agree !! but i using one bmminer original (no compiled by me) , i don't think that problem for other machine (may be i don't reason), on my S9 i tested 7 x bmminer, i try man !!! lol
on the other hand I am disappointed that no more people try your mod :( on paper it is the best for my taste! Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 01, 2018, 10:49:23 AM yes i agree !! but i using one bmminer original (no compiled by me) , i don't think that problem for other machine (may be i don't reason), on my S9 i tested 7 x bmminer, i try man !!! lol on the other hand I am disappointed that no more people try your mod :( on paper it is the best for my taste! Try getting the single-board test from the package and the rest of the files and use your original bmminer with it. Single-board test should be able to overclock any bmminer About people no trying the mod, probably because I am a newbie on this forum, and there are more established threads with overclocking topic. Good luck! Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on November 01, 2018, 11:25:54 AM Yes, do you think i'm ready to test this mod on T9+ without bmminer ?
Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 01, 2018, 02:13:01 PM Yes, do you think i'm ready to test this mod on T9+ without bmminer ? I don't think it will work, single board test was compiled for S9. There are different options for T9+. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on November 02, 2018, 09:09:33 PM Hi, ok it's working I do not test then ...
I have moved forward again, and I have "unblock" the display of the PCB temperature in the minor status instead of "Temp (chip1)";) it works well: p 2nd, would it be possible for you to provide a screenshot of an overclocked T9 +? I want to change the tenssion of my T9 +! : p and if you would have a log of the kernel where you can see the tenssion modify? thank you ;) Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 03, 2018, 01:40:31 PM Hi, ok it's working I do not test then ... I have moved forward again, and I have "unblock" the display of the PCB temperature in the minor status instead of "Temp (chip1)";) it works well: p 2nd, would it be possible for you to provide a screenshot of an overclocked T9 +? I want to change the tenssion of my T9 +! : p and if you would have a log of the kernel where you can see the tenssion modify? thank you ;) Hi, I do not have any screenshots saved of the kernel logs. You can install on a machine and check it out yourself. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on November 03, 2018, 01:42:05 PM I did it but remember you had to replace my PIC32 making the boards out of use: s
Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 03, 2018, 03:57:04 PM I did it but remember you had to replace my PIC32 making the boards out of use: s I think you tried when the tool was not detecting which miner version it is, s9 or t9. The latest one will know which bmminer to copy. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: thierry4wd on November 03, 2018, 04:26:19 PM Yes I already did what was needed have already debated theessess;) and I did everything well;) for proof your mod works very well on my S9 (proof that I know the install lol) but not on my T9 + ...
I wanted the kernel log for me, to understand what's wrong;) Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: jfaubin on November 04, 2018, 03:24:28 AM [...] Attention!!! S9 only. http://torrent-miner.com/tools/Antminer-S9-LPM-20181023_OC.tar.gz [...] Hi Alex, This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction. Regards. J-F Aubin Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 06, 2018, 03:14:04 PM Hi Alex, This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction. Regards. J-F Aubin Hi, make sure you flash the original firmware before applying this patch, may users had other overclocking mods which are not allowing this one to work. You can either reset to factory or flash the autotune version for your miner. There's no source code for this yet, I was able to disable fan check by modifying binary code and to overclock from the single board test. Single board test code is available on bitmain github, and you apply same changes that I've applied on my video for bmminer. The fan disable version is not made public, if offered only paid by PM or discord. Good luck! Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: UknoWho on November 13, 2018, 08:51:22 AM Hi Alex I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip
Would you please sent a email including bmminer-deploy-S9-T9+.zip and Antminer-S9-LPM-20181023_OC.tar.gz My email q498370658@gmail.com Thank you :) Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 17, 2018, 04:27:19 PM Hi Alex I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip Would you please sent a email including bmminer-deploy-S9-T9+.zip and Antminer-S9-LPM-20181023_OC.tar.gz My email q498370658@gmail.com Thank you :) Hi, I updated the main link as I removed that file from the server, this is the latest deployer: http://torrent-miner.com/tools/Antminer-MassDeployer-v.1.0.zip and here you can watch a video on how to use: https://www.youtube.com/watch?v=XkB6ymB01c4 Title: Re: Overclock Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: sergw on November 19, 2018, 11:59:46 AM Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same?
Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: bitcoinore on November 20, 2018, 02:26:29 PM Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same? Same here, seems the firmware is simply not stable for some reason :( Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: sergw on November 20, 2018, 05:31:29 PM Same here, seems the firmware is simply not stable for some reason :( yep, i had to rollback to original fw. maybe my S9 from feb-may 2017 batch not tested enough. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 21, 2018, 09:23:07 AM Ya, it's actually the LPM which doesn't like overclocking on some boards, especially the 13.5 machines or older 14TH.
I plan on putting some more work into finding a solution for this in the following weeks, until then, the best solution for LPM is the original firmware on bitmain without overclock. There are some users which were lucky and it worked, so always test on a few machines before mass deployment. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: behnam98 on November 25, 2018, 10:30:04 AM how to work "Customize the fan speed percentage" item ?
i have t9+ , but my fan speed not change by change this item !! i test 10 , 20 , .... , 150 and more for this field ??? :-[ Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on November 26, 2018, 07:15:12 PM how to work "Customize the fan speed percentage" item ? i have t9+ , but my fan speed not change by change this item !! i test 10 , 20 , .... , 150 and more for this field ??? :-[ Hi, I have not tested that feature on T9+ unfortunately. Might be different because of the controller. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: boogiebl on December 09, 2018, 06:14:49 PM Hi,
I did backup config before deploy on "upgrade" page. if I now restore my backup on the same page, will everything be as before deploy? Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: fanatic26_ on December 10, 2018, 11:59:23 PM Hi, I did backup config before deploy on "upgrade" page. if I now restore my backup on the same page, will everything be as before deploy? No. That just backed up the user settings, pools and such. It did not create a backup of your firmware. Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: boogiebl on December 15, 2018, 10:46:58 AM :/ ok. And how can I get back to the state before? Can I install new firmware? I want to have the option to return to the factory settings in case something goes wrong. I have 4 more devices and I would also set them up again i ... can anyone tell me how to backup the BBMINER? so I can restore the default. I asked for a google but did not find it. now the temperature is great for OC but in the spring I will probably have to reduce the frequency and voltage .... for now i deploy one device and i have 4 more ... so i do not spoil something .... P.S. and what is the default voltage? the frequency is from 568 MHz to 575 MHz ... Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: alex1560 on December 17, 2018, 11:52:43 PM You can flash the original firmware or extract bmminer file from a regular machine and use it with the deployer.
https://file11.bitmain.com/shop-product/firmware/Antminer%20T9%2B/Firmware/00720181126222105736ja7USR1p0695/Antminer-T9%2B-all-201811211435-autofreq-user-Update2UBI-NF.tar.gz Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: boogiebl on December 18, 2018, 04:12:45 PM one more question, and I will not be bored ... I have a DOA device ... can I deploy it
https://imgur.com/a/Om2Y3v6 Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: awilliams315 on January 14, 2019, 08:44:36 AM *** Some info for those with T9+ based off my machine ****
I have a T9+ and using 870 mV, 675 freq, have customize fan speed at 50%, and i left the box checked for going over 90 degrees since this is the first time i have used any software before with the miner. With this I am averaging 12,511.71 GH/s and the temps are ranging from 80-86 on different chains. But my fan is constantly running at 6,120 so I gotta figure out that since I dont want it running full speed. But hope this helps someone Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: elmejorrematador on July 16, 2019, 10:13:26 AM Hello guys,
So is the free version still available? I saw that there is supposed to be a for sale version to use for more than 10 machines? Title: Re: OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable Post by: taserz on November 29, 2019, 11:18:56 AM Hey I realized you edited out the front page. Is there a link anywhere for this as I would love to link this for the older bmminer mods on my other thread.
|