Bitcoin Forum

We are a team of experienced dev-op engineers that want to bring a secure, scalable and stable multi mining pool to the community with a great single sign on (SSO) frontend. You just register once and then use your account on any of the offered pools - just update your wallet information and get mining!

We bank on coins with tremendous potential in the future and we want to offer a place to mine coins with excellent support from our side and a place where almost all profit goes to the miner - the person who spends all the energy, electricity and hardware cost in the first place!

Mining Enthusiasts is only taking a 0.25% fee on any pool to cover server expenses and everything else goes to our miners!

Of course you can always choose to donate some of your hard earned coins to support our cause! 😇  

We have a great scalable system at hand and are ready to discuss improvements based on demand from our miners:

• More pools in different regions besides Europe
• Different payout schemes: PPS/PPLNS (we currently run the simple proportional payout system)
• Support for other altcoins
• Pool forums

Sign up and start mining as easy as hitting our VarDiff straturm server with your account information!

Thanks for joining us and have fun mining!

How much is the minimum payout?
And to receive the coins is just like the other cryptos like: mining, send to wallet and than change on a exchange?
(because this coin is something new for me and I saw a video the guy told that to participate you have to buy 1000 tokens, I'm confused sorry =) )

If you want to run a Chaincoin master node (see https://chc.masternodes.pro and http://www.chaincoin.org/how-to-set-up-masternodes/) you need 1000 CHC in a wallet, then you can use that wallet to start a master node.

Normal mining, with minimal payout of 0.1. On registration you input a CHC receiving address from your CHC wallet and then do what you want with it, once you get the payouts.

See: https://coinmarketcap.com/currencies/chaincoin/#markets

Cryptopia and Novaexchange currently have CHC on their exchange. With the craze around this coin and the HODL movement, I personally think more will follow.

Hope that helps!

Thank you, I'll try your pool when i get home

Hi, newbie here.  I'm trying to mine ChainCoin, but I only found the sgminer and it seems it doesn't like my 3 x 1070 GTX and crap out an error when I tried mining ChainCoin with it.  I see that you seem to say to use ccminer?

Yeah, make sure to update your NVidia drivers to the latest version and remove all overlcocking. Get ccminer alexis78 and get it up and running. Once its running, only increase the core clock in steps of +10 until it gets unstable.

I took that version.  Is this good?  I'm using it now on the pool.  also, I got hashrate of 36MH/s per card (I suppose?)  I have 3 x GTX 1070. 
http://github.com/KlausT/ccminer/releases

I see that the accepted shares are at 99.55% on every share, but when I started, it was at 100%, is this good too?

Also, big newbie question, I use to mine only using the NiceHashMiner that was paying every day in BTC and I could then withdraw from the NH wallet.   Now, I created a CHC Wallet using the wallet I downloaded from the chaincoin.org web site.   It's my first time mining in a pool, so how does it work for the payout? I suppose at some point my payout are sent to my CHC wallet ? (what are the fees?).    If I want to exchange my CHC for some BTC later on, or just sell them for USD$, I need proceed how? :)   So much newb quesitons.  i just want to payback my rig first as fast as I can (I took a small loan and still have 2k$ to payback on it).

Ha you wish it was per card, thats actually your current "total."

1070s is around 13mh per card.

The ccminer version I'd suggest is ccminer-alexis. You're total hashrate is probably around 40 MH/s with 13 MH/s per card. 100% acceptance rate over several hours of mining is quite hard. Sometimes your internet is lagging, or your GPUs need longer to calculate a share and then your result gets rejected. It's normal to not have a 100% acceptance rate, as long as the reject shares rate stays below 10%.

Most of the pools (including this one) pays out in the currency you are mining. Thats why you have to provide a CHC address on signup, so your shares of the block reward can be send there. As the post states the fees are only 0.25% and everything else goes to the miners. Indeed you can exchange your CHC coins to BTC and even USD using an exchange. Google 'Novaexchange' and 'Cryptopia', those are the ones trading with Chaincoin.

Getting ROI (return of investment) for your rig with CHC is currently very possible :)

I'm getting "stratum refused connection" errors every time. I have checked and double checked that I'm using username.workername and correct password.

All systems running normal here, people are mining and stratum is responding. What's your complete command line?

After going through the logs, I found:

[2017-07-14 06:18:17.630] [DEBUG] [default] - Pool chaincoin Thread 1 Unauthorized newmmz.chain1:XXXXX [111.220.93.213] (XXXXX put there to obfuscate).

Make sure to have the Worker name and password in your ccminer line like so:

Hi,

Just starting using this pool. Waiting to gather a bit of coins and then maybe even donate a bit :)

BTW you mentioned ccminer from alexis. I only found his git. Are there any windows precompiled binaries somewhere ?

I've made the best results with Alexis78, here is a link to the one Im using https://www.dropbox.com/s/7ha1zaplqwfzrmd/ccminer-alexis78.zip?dl=0, I've also updated the getting started page with a link to the download for your convenience: http://mining-enthusiasts.net/index.php?page=gettingstarted

Thank you so much!

One thing that is bugging me is that I cannot login to the site from my android. Using Android 6 and Chrome.
When logging with wrong credentials >> gives error messages
When logging with correct credentials >> no error messages, but I still see the login page, and on refresh I'm not logged in.

I have even reset my password. On Desktop works fine every time.

Loving everything else, including the very fast response on this thread!

---

One more Q, sorry if I'm getting tiresome :)

My Dashboard reports hashrate fine, and shares, but on Balance I have 0 in both confirmed and unconfirmed.

Would those fill in time to my estimated coins per day or I may be doing something wrong ?

Thank you again for all you're support

I'll try and have a look at the Android issue, I'm on iPhone and it works great - so you'll have to be patient. Yes, your unconfirmed balance goes up every time the pool finds a new block. Then everyone gets their shares as unconfirmed balance. The amount you get depends on the computing power you have put into finding the solution. If you look at the last found block, you where the one to find the solution:

User Name    Type.         Round Shares   Round %   Amount
andu2flo.       Credit       18,964               2.06.       0.12365857

You should now have that as an unconfirmed balance. Now the pool and everyone part of the Chaincoin blockchange has to validate the block and the transaction that goes with it. It has to validated 120 time, once that happens the pool pays out the coins to all the people involved finding the block. You can see the block status here: http://mining-enthusiasts.net/index.php?page=statistics&action=round&height=1176431

---

Another thing is that 'Auto-Payout' has to be enabled by the user, because you can choose what sums you want to receive once your balance is confirmed! You can setup auto payout under 'My Account' / 'Edit Account' / Automatic Payout Threshold.

-u newmmz.workername -p password

i just loaded up ccminer alexis and it killed my pc lol running 2 x 1080s ive been getting 33mhs total. i switched to alexis. it managed to generate 1 line which read 46mhs!!! but then pc crashed and rebooted. assume its ocd my cards too much?

anyway i can dial it down a bit?

cards have been running ccminer 2.0 stock with no issue.

Yeah, most instability is coming from OC, try low and go up until unstable. Then lower again, so you find a sweet spot - memory oc doesn't help with C11. Make sure to have 'Above 4G Decoding' enabled in your bios and put your PCI-E ports to at least Gen2.

sorry, even when i ran alexis it was set to stock settings. could alexis have altered the settings? because soon as i ran it, pc rebooted.

and can you please explain the pcie part? is that another bios option?

thanks :)

I already put my rig on your pool, let's see

Do you send your coins to CHC wallet or you send directly to the exchange?

As you signed up, you had to provide a CHC wallet address. Check your settings under 'My Account / Edit Account' - you'll find auto payout or manual payout there. In both cases we deposit CHC into your CHC wallet. Exchanging it is your part of the work - but it's CHC so HODL  ;D

Thats unfortunate, I can't really help you debug this remotely. The PCIE port settings are a BIOS thing too yes, e.g. https://rog.asus.com/articles/maximus-motherboards/maximus-vi-extreme-performance-tuning-guide/

If nothing helps, get CCMiner 2.0 from Github.

hahahaha true bro
Thanks for your help, I will support the pool, you are prestative

thanks mate. ill have a play around i guess. its  a pity because the one line it generated was 46mhs. 13mhs higher than ccminer 2.0!

Hello All

I have been mining for 3 months over on nicehash and have been reading up on crypto's...ran across this coin and the HODL'ing that is being done and it sounds like a great idea.

So a few questions

I have 2 gtx 1070 averaging about 34.xx MH/s.  What is everyone else averaging?  On ccminer 2.0 i only avg 27.xx Mh/s.

On the website, under pool statistics, why does my MH/s vary so greatly?  I runs from 12 Mh/s - 30 MH/s.

Last question I promise....just super excited.

I am running a very basic batch file.  I played around with the intensity, but is there anything else i should add to the batch file?  Anything to make it run better?

Thanks to the creators of this pool.  played around with suprnova but figured why not give this a shot.

one last thought...

Any chance we could get a section on the website where people could enter their rigs?  or their GPUS?  not sure if that is even possible. 

It would be cool to be able to click on a miners name and see his rig along with his hash.

Welcome to the pool!

I have a rig with 6 x 1080ti, core clock to +200MHz and I do around 175-181 MH/s with CCMiner alexis at everything else stock with 60% fans around 67 celsius.

The hashrate varies because your are connected to a vardiff stratum server. Thats a server that sends you workloads and probes your hash calculation speed and then dynamically adjusts the difficultly level you mine with. This happens a) to have no one spam the server with low difficulty shares and b) to have everyone mine as efficiently as possible. The fluctuation is normal and seen on any pool with vardiff.

For the batch file you can try:

what does your batch file look like for nicehash please???

Haha

If you tell me where to find the nicehash batch I'll post it.  I just downloaded nicehash and clicked benchmark and start.  Never messed with a batch file over there.

oh sorry never used nicehash before :? noob question it seems lol

looking at their site there was no mention of c11 algo? what did you do there? how did you mine chc with nicehash :?

thanks!

Do you have any android app for monitoring your pool?

I'm mining, your pool is excellent so far !
Thanks !

No sorry, but I'll look into the issues with authentication on Android Chrome.

hi Krisso with NVIDIA cards and alexis mod the speed is very good.. but with rx 480 is very shit with sgminer, can you suggest me somthing? thanks so much

Unfortunately I don't have ATI cards, but for C11 (an algorithm thats chains together several other algorithms to produce its hash) the NVidia cards are currently outperforming ATi.

Is there an AMD miner for Linux?

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Which OS are you on?

Windows 10 64 bit

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hard to debug this from far away, but you should make sure you have an inbound Firewall rule added to your windows firewall rules. The chaincoin wallet asks you to add it on the first run, maybe you disallowed it or it didn't pop up and the wallet cant connect. make sure its in there.

What sort of hash rate should be expected from 6x rx470 4gb cards? And with what miner?

And to overcook should only the core clock be increased? What about memory?

Thanks

Hi

make sure you have ports open 11994, 11995
Also make sure you enable UPnP on your router. This worked for me and the wallet started syncing

@Krisso

I avg about 150-160MH/s yet your site reports only 130. What could be the cause of this?
Where is the server located, in EU?

Thanks

The site uses a stratum server with vardiff - it's setup aggressively giving you around 20 seconds to find a share on a 20% variance, then retargets difficulty every 40 seconds if your rig fails to hit the threshold. This can sometimes result in lower reported hash rates as you get hit with difficult shares - or said differently - your rig is calculating and not sending shares. The upside is that if you fall down you will get lower difficulties and a higher resulting hash rate after, so it should average out. If you look at your income / earnings you'll see that this should be as effective as possible.

Got mine working! In the "chaincoin.conf" config file in your chaincoin install location add this:

addnode=45.63.90.82:70002

That initially gave me 1 connection and now after 5 min i'm up to 8 connections

My wallet address: CKSD8cxqnPidPjjqj7vWAzA9pZK4DiA32H

Hi guys,

A couple of noob questions:
I got the Alexis miner but it is just a .exe file? Nothing more?
And I got a batch file but it doesn't seems to work. I got 6 RX470 cards.
This is my batch file now, so maybe someone see what is wrong with it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u LeonDroogendijk.miner1 -p xxxxxxxx

Thanks Team, Glad to see chain-coin community is going strong. I would switch my rig to it... however, please confirm which miner you recommend for AMD cards... as my RX580 8 gigs are able to mine only 5-6 m/h/ sec per card by using SG miner.

Please HELP.......

To everyone seeking information on mining with AMD GPUs.... You will need to use Sgminer since ccminer (all versions of it) is for NViDIa GPUs only. The Sgminer version that supports CHC is an experimental modification of the original Sgminer and in my personal testing was not 100% stable (even at stock settings). With an Rx 480 8GB at stock settings you could expect about 6.5 Mh/s, a Rx 470 would be lower then that of course. ---- to sum it up briefly --- AMD is not currently a worthwhile option to mine Chaincoin. Sorry folks, but you'll do better on a different coin at this point.

I am trying to mine with my 1 X 1050ti Asus OC Game Strixx with stock settings ..
but miner crashes in 10 secs ..


It works fine with Yimp pool >> with settings below

ccminer-x64.exe -a c11 -o stratum+tcp://yiimp.ccminer.org:3573 -u CTfpsFvzcmKsHLDWTGwyxvx8f5QehJAZt4 -p c=CHC

But when m using mining-enthusiasts.net:3032 it is crashing ..

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u "myusername" -p "mypassword"

I noticed when mining on YIMP gpu intensity is set to 19 ... but on mining-enthusiasts.net it is 9 .. could this be the cause ?

How to fix this guys .. any help?

Once again its all stock settings .. no overclock. no change in any settings of GPU what so ever !

Thanks for the explanation. But why does the diff increase in such extreme steps. It seems a lot worse today. It does this a lot and then it just sits there for minutes not really submitting anything.

http://imgur.com/ew0lqXv

So is this pool better then yiimp.ccminer.org ?

Thanks for reporting, we have adjusted our stratum servers today due to more miners and a higher hash rate throughput. Your issues should be fixed and addressed :)

Well it takes 1.75% less of your profit to begin with :)

ccminer-alexis78, 1080ti rigs at 60%TDP, celeron cpu, 4gb ram

i noticed that the miner would hang after certain stratum difficulty adjustments. after 5-10 minutes of no activity (and gpu power usage drops to idle) i see that the worker drops off the mining-enthusiast dashboard.

thinking the miner crashed, i tried to solve by running a script to restart the miner every 1200 seconds.

this causes a new problem where in some sessions the miner will start up and get reduced MH/s (~20-40 compared to 170) and it either stays that way through the session or very slowly increments up towards normal expected hashrate (taking up to 15 minutes to reach it).

ive played around with intensity and core OC but the problem still occurs.

Should I just let the miner hang? I've never let it sit there for longer than 10 minutes to see if it will resume. Ive noticed a few times it resumes after 5-7 minutes...i guess ill have to wait and see.

Please give it another go, we have tweaked some server settings, you can adjust the intensity by using the -i command line option, e.g.:


Hope that helps!

The issue should be solved, please re-evaluate and report back - thanks for helping!

The issue should be solved, please re-evaluate and report back - thanks for helping!
[/quote]

So far so good on that front ;D

The hashrate slowly declines now. Is this normal?

It will always vary a bit, you shouldn't have stalling anymore nor ultra low rates. VarDiff will still try to find optimal difficulty - so it will come to a good match after some time mining. Just observe and report back  :D

so somehow I locked myself out of my account mining-enthusiasts account :-\ ... the email password  reset/unlock does not seem to want to send me an email :(

The mail system is relaying over gmail and hit its capacity limits for today. Wait until midnight UTC, quota will reset and mails will be going through again. We are working on a fix.

Thanks Krisso !

Thanks it did work !!

All those who have been having problems with Chaincoin Wallet Sync >>

Chaincoin Wallet Out Sync - No Blocks Found - No Network Connection

You need to addnode to your conf file...

You can find this file here C:\Users\Nick\AppData\Roaming\Chaincoin

Nick is my username find yours...

Add the additional nodes in your config.   

addnode=149.56.108.123:11994
addnode=208.94.242.218:11994
addnode=104.238.153.140:11994
addnode=45.76.17.223:11994
addnode=45.32.1.206:11994
addnode=176.9.35.109:12040
addnode=144.76.64.49:11994
addnode=45.32.185.155:11994
addnode=51.15.132.222:12003
addnode=75.130.162.248:11990
addnode=75.130.162.248:11993
addnode=69.12.74.106:11994
addnode=54.244.65.248:11994
addnode=104.238.167.251:11994
addnode=45.76.235.204:11994
addnode=75.130.162.248:11995
addnode=104.223.2.247:11994
addnode=75.130.162.248:11998
addnode=45.76.90.207:11994
addnode=75.130.162.248:11999

Hope this helps .. Cheers

Hello Krisso,

I am trying to mine with your pool having 4 gtx 1060 3gb (1 of my rig) but getting "Results #xxxxxxx could not verified on CPU constantly.
Is there any thing missing?
Thanks

Just read through the thread, its either to much overclocking, old nvidia drivers, worng ccminer version or to high of an intensity setting on your command line. Cheers!

Thanks for the response,
 Clocking is :
Power Limit 62%
Temp Limit 70%
Core Clock +50
Mem Clock +500
Fan 55%

Using Msi Afterburner.

Nvidia drivers are updated to 384.76, Windows 8 64 bit
ccminer is latest.

This site not have SSL? Isn't that insecure?

SSL will be added in the upcoming days.  :)

Excellent! Great work by your team here Krisso.  :)

Hi Krisso, Great job by you and your small team!!! Been mining with you a couple of days now. Your pool runs better than any other I have tried! Keep up the great work!!! :)

Hi all,

Just set up my iBeLink DM384M to do work, but it got 100% rejections.

Can I mine using cgminer?

FYI I'm a noob at mining!

setup

stratum+tcp://mining-enthusiasts.net:3032 nezero.1 1234

Hi Nezero, Good to hear from you. I suggest you check back through all this conversation and on the Mining-enthusiasts.net pool. Krisso has put together a really good set of instructions and tips. Follow what he says and suggests and it will work great. Some really important points to note. NVIDEA cards run best on C11 hash and using ccminer-Alexis78. Do not over clock the GPU by much and if you do go in very small steps.... allow the system to settle before making the next change, be patient.  ;)

Good luck.

Thanks for your response. I have read the thread, but I've seen no mention of cgminer. The rig i have is ~380Mh/s ASIC, but it mines with cgminer and at this time I don't know if I can change that. If cgminer isn't supported by the pool I'll go a different route, but just thought I'd ask.

EDIT:

Have I misunderstood, I thought CHAINCOIN was x11 so assumed I could use my ASIC on it. What is C11?

The site is fully SSL enabled now https://mining-enthusiasts.net (https://mining-enthusiasts.net).

Our miners security and privacy is taken very seriously! Btw, Chaincoin is up again - dont lose hope - HODL! Come over and lets do some mining together!

Krisso, thanks for all your hard work!

@Nezero, check out www.chaincoin.org for all details on Chaincoin and the c11 hash, but basically it is 11 hashing algorithms chained.

Depends on the hash rate of the pool and the network, luck in finding blocks, number of miners on the pool and pool payout system - quite a lot of things as you can see. The Mining Enthusiast numbers are quite accurate - we get the current exchange rate and calculate hash rates quite precise. I do around 30 CHC a day with a rig of 6 x 1080TI at around 181 MH/s.

One 1080TI should therefore yield around 5 CHC/day.

@Krisso, glad to see SSL! :)  I noticed that the site is also being served at port 80 over http. You should close port 80 or set a redirect via HSTS so no one accidentally uses insecure transport.

More on HSTS here: https://www.globalsign.com/en/blog/what-is-hsts-and-how-do-i-use-it/

Thanks for mentioning - we didn't use HSTS but a simple virtual host rewrite rule, but definitely forgot to do so ;D

No earnings in the last hour?
Or just the statistics is broke.

No luck rather - as you can see no block has been found.. patience is a virtue.

Ah okay. I thought  something wrong with my rig. Thank you for the  fast response.

hi, what happend to this pool today ? Were we mining 5 hours for nothing or for chc developers ?
Suprnova pool was also slow today...
Anyone knows what happend to chc network today so it became so slow with finding blocks ?

i keep promoting this mining pool on YouTube and else where... hope it remain stable as it was...

Best regards

Miki

Just as I wrote in the reply before your post, this is how mining pools work. Its about the net-hashrate, number of miners, pool hash rate and of course luck. We had a bad streak over the last couple of hours but thats just part of the game - its normal!

And we (the developers) don't take anything but 0.25% and never let the miners mine exclusively for us!

Hi Krisso,
thank you for info... never had big dip in finding blocks before (was mining another coins before) , so i didn't know this...
To be honest, i understood completly your last post just after i posted question, sorry about that also...

i just saw my payments were couple hours stalling... and after hackers stole my ETC from classic ether wallet (couple weeks ago) i get upset faster hahaha...

I don't mind if developers getting extra pay (i turned on donation with 0,50% extra for you guys, will give more when i get enough CHC for masternode...) , i wish we had more CHC developers so this coin gets much more attention...


Thank you for great work with this mining pool...it is amazing... very informative and beautifully done....

Is there any mobile app we can use to monitor mining ?

Best regards

Miki

For miners who would like to monitor mining from this pool, you can use this android app:

https://play.google.com/store/apps/details?id=com.apaluk.android.poolwatch

After installation , pres sign + (plus) and copy- paste api key from "edit account" from https://mining-enthusiasts.net

After that just change name of informations you want to have in poolwatch app...


Good luck

Best regards

Miki

No worries - where on youtube are you promoting the pool? Would love to see it.

Currently we do NOT offer official app support for monitoring but we are expanding the mining pool to a multi-pool behind the scenes. Once that is ready app monitoring support will be available.

in Discord group clubhodl and YouTube ....diferent channels , usualy channel of Max Lee (Highoncoins)...
Something like this: https://www.youtube.com/watch?v=DnID0_HnFSk&lc=z13qc1lynwqpgvbay04cergh1nfjxzezwb0.1500980481354733     (look at comments) ... usualy also when Max or another youtuber have live broadcasts in chat window etc....
Before promoting we had about 30 miners... now we have more than 80  ;)

Is there any other location where we can talk about Chaincoin besides this ? (i heard slack group is closed, right ?)

Best regards

Miki

Hi Krisso, are you guys thinking of putting a forum on mining-enthusiasts.net? It would be great if we could all chat amongst ourselves. Thanks. Roger

We are generally open for everything, if enough of our miners demand it we might as well do it  :D

Krisso, thanks for your reply.

@ All miners on mining-enthusiasts.net, Do we want our own forum? If so, please let Krisso and the team know!

Roger

Hi Techansaari! Did you get your rig running on mining-enthusiasts.net? I also mine with gtx 1060. If you want to discuss set up I can share mine this evening.... Roger

Sadly, CHC seems to be dying, I wouldn't ask them to put the work into anything just yet. I do hope that Krisso and team expand to other coins, I really like their pool. :)

Sadly, CHC seems to be dying, I wouldn't ask them to put the work into anything just yet. I do hope that Krisso and team expand to other coins, I really like their pool. :)
[/quote]

I would not be so pessimistic. All cryptocurrencies are going through a bad patch. It will improve….. as Krisso said in another post & on a different topic – be patient!  ;)

We've heard your requests and we are adding another coin: Signatum! This coin has only started, and we think it is going to be huge!
We modified our pool, so you can easily jump between Chaincoin and Signatum with the pool chooser at the top - give it a spin: https://mining-enthusiasts.net/sig! Of course we are sticking to our principles - 0.25% fee and a stable and fast pool.

Code:

We are always open for suggestions, feel free to reach out in this thread!

Thanks for joining us, have fun mining and donate if you like our pool!

Friendly reminder that we offer a 0.25% fee Signatum pool with a fast and responsive frontend and scalable servers for Signatum mining!

Is Signatum pool working? Shows 0 workers 0 blocks.

It is, very big net hash and not enough worker to find a block.

Has anyone looked into CREAM coin yet?  New masternode coin that is POW in the beginning.  Might be 1 worth adding

When will the transfers to offline wallet resume? Thanks!

are you guys ever going to get the pepe coin mining pool going again???? There supposedly is a fix for the issues every ones been haveing that was causing the shares to not go threw properly. and should be able to work now again.   

Will be fixed tonight - still traveling, sorry!

We are working on it. While that is going on, I manually ran the payout script. Just FYI.

Payments have been done, and issues resolved. Happy SIGT mining!

Is there a reason the site is so slow.
Plenty timeouts and very slow loading. Tested from multiple locations.

Thanks for the information, and even for me, the website is running too slow right now. Probably a lot of traffic is coming your way and servers just can't handle them? Even if the website loads, it's showing very low hash rates for all of the workers.

We are working on it - someone finds it funny to DDOS our servers for some reason.

Damn :(

Hey guys. I am aware that there is a problem at the moment. Just wanted to query if i should be seeing my workers or they will only show once the problem is resolved. That is regarding the new Signatum pool and i just launched the workers. thanks for hosting the pool it has been awesome so far.

can't access to your pool now.
I switch to another pool if you pool working I will be back again.

The issues have been resolved, payouts have been sent out. We have hardened security and made sure to take some load of the servers. Thanks for your understanding you guys rock - systems back to normal!

Thanks @Krisso

Did anything change on the var diff side of things?
Individual Difficulty is a lot higher on your pool compared to others. Started about 45 min ago. I received timeouts and then it reconnected. But since then the diff is up by a lot.

Yeah we tweaked the diff settings to lower share submission rates and bump share difficulty - which should end up being the same reported hash rate as you're just submitting more difficult shares. Could you report your numbers after you let your rigs mine for 15 minutes? That would help - so we can make manual adjustments  :)

Well, I am seeing quite a few shares not being accepted

accepted: 6/7 (diff 3.519), 48.47 MH/s booooo

I find if the difficulty is very high and something goes wrong connection wise, whatever you worked on might be invalid?
Inst there less margin of error if the difficulty set to lower?

Or let me rephrase, is there a benefit of having a higher difficulty oppose to a lower one?

CHC has been very stable for weeks, would be great if we can get SIGT stable too :)

Thanks for all the effort.

Tested a bunch more and lowered the target time some more - we want to stick to these numbers for now. Miners and hash rates are looking good overall.

Ok. My hashrate is definitely down from 265/270 to 234. Will let it run for a bit longer but doubt it will make a difference.

Don't forget block difficulty went up too, there are several factors for fluctuating hash-rates.

I switched to a different miner this morning. All is back to normal on my side after switching back to the previous miner version.

@Krisso what is the TX fee for? I've noticed it's 5 coins each time. Is this correct?
Nvm. I see it's a on-demand TX fee.

We have just added Virta Unique Coin - https://coinmarketcap.com/currencies/virta-unique-coin/ with low fees!

Happy mining https://mining-enthusiasts.net/vuc (https://mining-enthusiasts.net/vuc)

All blocks are orphaned on vuc?

There was an issue with the wallet lagging behind the main block chain that has been fixed. Additionally the current blocks are very low difficulty and thus increasing the chance of other pools finding a valid solution too. It’s basically a race of who submits it first - orphans are unfortunately expected in this early stages of the coin.

Thanks for the update and I'm pretty sure this is the best mining pool for SIGT. I'm already spreading awareness for this pool on other platforms. Keep up the good work.

miner is unable to connect to port 3034

Just ran tests and looked at the system status, stratum is definitely available and running:

ccminer-nist -q -a nist5 -o stratum+tcp://mining-enthusiasts.net:3034 -u XXX -p XXX

Other miners are running too - sure you don't have connectivity issues?

All systems running fine, maintenance done. Thanks for your continuous support and happy mining!

Can you explain why there is a 5 CHC fee when withdrawing? That seems completely absurd.

The rational is very easy to understand: We want to encourage and grow loyal miners. Thus, you should be using auto-payout which has the low and normal fees and deposits your funds to your wallet automatically. This means a) the funds go out of our system and our wallet does not have to carry unnecessary amounts of SIGT (good if DDos attachks or hacks happen) and b) users get their funds and don't forget about them, causing us less work and maintenance in the long run.

Just enable auto-payout, set it to a reasonable amount and mine a bit and you'll get your funds and circumvent the 5 SIGT fee - makes sense? For us it totally does.

Hi

on the SIGT pool, who is the top anonymous user?
I never see an anonymous user at the top with the highest hash rates, yet he gets the highest share rate, by a mile.
I also then thought it might be ALL anonymous users combined, but that is not the case either.

@72% Round shares, that user should be mining at 17-18GH, but I dont see that user.

Under now circumstances will we share account names of users who have chosen to remain anonymous within the system. We had several miners connect and mine within the range of 15 - 100GH, those people most probably have bought computing power and directed it towards our pool for a specific period of time. This is not uncommon and you can chose to do this yourself if you have the BTC to spare.

I think you missed my point. I do not want to know the identity of the user. The point I am trying to make -  there is an anonymous user that constantly gets 70-80% of the round shares, yet, I DO NOT see him in the Pool list ever mining. He would show up there, not so?

As I said, that person is probably renting time to mine with huge hash power, getting the majority of shares, then leaving until a block has been found. Thus getting an huge amount of the block reward. While everyone can do this and its a 'strategy', do you suggest banning that user?

So what you're essentially saying is, I can mine for only a few minutes of a round, considering I have the highest hash rate,  and still receive the majority of shares, even if the round took let's say an hour?  If that is the case I wouldn't call this a strategy, rather a flaw/loophole or exploiting the system. Is this happening only on mpos driven pools?

No, this could happen on any pool that uses the proportional payout system - proportional as in you get a proportional part of the block reward in regards to how many shares you've submitted.

Hello
Please check your SIGT pool user kane777 he came when block found and running for a few minutes and he gone.
He do this every time this is not fair for lower hash rate. Right now our friend move to other pool we can't stay with this user.

I have banned several of the users with this behavior, although they can create new accounts anytime 😕
I’ll be investigating a PPLNS payout system to make the issue go away for good. Thanks for reporting and your support, hope to see you on the pool again!

How long for fix issues on VUC pool?

i sent mail to Support for Transaction problem vuc sent out but i not receive.

many days past but not have any news.

what can i do?

Hi mining-enthusiasts pool

I had  payment from this pool ( in transaction ) but it's not shown in explorre and i don't receipt signatum ( 4 transaction )

from this link
https://mining-enthusiasts.net/sig/index.php?page=account&action=transactions&ctoken=206e281c19d188d174cfd112f3f80db25cccba8f358f9a78d828c75789d14556&filter%5Btype%5D=Debit_AP&filter%5Bstatus%5D=


1 ) 725.84624639 sigt
http://explorer.signatum.io/tx/c782df1e89674008b0575b64cdc46880bb7b713cb38979ceec94d9f7c272283b

2 ) 529.69064030 sigt
http://explorer.signatum.io/tx/808ce0fc03951a3e1c9717704c680789107027be961fe1a772e297d88bda810a

3 ) 445.32777145 sigt
http://explorer.signatum.io/tx/a004adaa6f5defc69cd1c3d7b742ba7187ceefb441863f83d47ad1a9a7376c53

4) 501.22596087 sigt
http://explorer.signatum.io/tx/3215c017f813ec23cda3105c645851629f39bc6877f7767bcbd416a9047a9f68


and i can't send email from your pool

please help me
thank you

There are no reported problems with the VUC pool, please tell me your user name and send transaction id(s) so we can take a look.

As you might have seen the Signatum network has sever issues at the moment (see the Cryptopia news). As per the explorer those transactions went out but they didnt get confirmed although others did. The pool wallet has been decreased by the amounts already, I'm investigating what can be done. It just seems like those transactions have not been confirmed at all and are traveling thought the signatum chain very slowely.

username tasana  transaction id  475625  Debit_AP

thanks.

Have any news for my problem?

Found the transaction:
ID           Account   Date                           TX Type   Status   Payment Address           TX #                           Block #   Amount
75625   tasana   2017-09-04 22:08:12   Debit_AP   Confirmed   VHethRWc...x8paw1qB   62ed97f9...7b725069   n/a           374.86461024

Does that look right?

yeah that im looking.



you can see my Deposit History in my wallet in cryptopia i sent vuc to it not have    amount  374.86461024


https://www.uppic.org/image-729A_59CE9899.jpg

Fixed.

https://chainz.cryptoid.info/vuc/tx.dws?a2425cad34afa3c691b124793713bd51ec12c9ab28dd0d9188f3965eaa2b6344.htm

THANKS.

Please help, I want to withdrawal my Signatum Coin, but I can't access to your pool.

my mail : neoduice at gmail.com

The pool has been decommissioned - send my your Signatum address to receive your credits.

These is my Signatum address : B6Cfc2FcsF3aCx6uRAbHCZPkomdnPcx188

and my Pool login : neoduice@gmail.com

Fixed.

thanks for your help

Please Help !

I withdrawal my Signatum coin by Debit_MP already before The pool has been decommissioned.
My wallet can't get the SIGT coin.

SIGT login : gapfolio@gmail.com
SIGT address - BBztDv9ySnbJikPdQJka62t7ay75stDZ1P

T_T

Your last withdrawal went through successfully:

http://explorer.signatum.io/tx/d38bec2b2544ee631273c8d0d7309ba314f6aa1765b5d54881bf7b3f33c1362d

I think, That is not my last Debit_MP withdrawal.

My last ordered Debit_MP is around 260+ SIGT coin in pool system before the pool has been decommissioned.

Please Help !

Pool died  :(, and my coins were suspended there on the balance sheet.

Here are my details, please make a payment.

login: rugerent@bk.ru
address: CHsTYzyoNKJf5iTXCJEFHcGzekSQzWP1oh