|
Title: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on September 12, 2013, 04:59:33 PM After reaching an agreement with c-scape and announced today bulk chip prices from BFSB, We decided to offer you all the possibility to get in October Bitfury chip based mining boards. The design is proved and working. Today We Assembled a test board and it is hashing @ 37-38 GH/s at the moment.
Features: 16 Bitfury ASIC capacity Adjustable (through 0805 SMT resistor) voltage regulator between 0.7 and 0.9V Core voltage regulator has 50A capacity, so chips can be overclocked. On-board ARM Cortex M3 processor with standard RJ-45 100 Mbps Ethernet port. Built-in mining software can operate stand-alone. No PC or Raspberry PI needed, just an internet connection. TCP/IP stack with DHCP and DNS support. Just fill in pool server name, port number, username and password. Support for Stratum and backup mining pools. Built-in small webserver for chip status/speed reports. PCB temperature sensor, could be used for automatic shutdown when temperature gets too high. If you don't have the budget for a large number of chips, overclocking is the best option, as it will get you 40GH/sec out of a card 1. Miner Pricing: 1.1 Full assembled miner including PCB, 16 Bitfury chips , desighner fee, all components, assembly and testing,hestsink and fan - 720.00 EUR 1.2 Assembly service for owners of bitfury chips -including PCB,assembly . designer fee and testing , heatsink and fan - 399.00 EUR http://s13.postimg.org/fq53sy4nn/20130912_112622.jpg (http://postimg.org/image/fq53sy4nn/) http://s13.postimg.org/9qhcpajv7/20130912_195635.jpg (http://postimg.org/image/9qhcpajv7/) http://s13.postimg.org/pyxkyrspf/Techno_Shash.jpg (http://postimg.org/image/pyxkyrspf/) 1.3 Technobit NanoFury USB miner - 52 EUR 1.4 Technobit NanoFury assembly service with your chip http://s21.postimg.org/5vspbt5o3/NF1_MCP2210_v03.jpg (http://postimg.org/image/5vspbt5o3/) http://s21.postimg.org/9e4p876k3/NF11_MCP2210_v03.jpg (http://postimg.org/image/9e4p876k3/) Technical details * No external power supply is required as the board is USB2.0-powered. If you want to run multiple units via a powered external USB hub you’ll need to get that separately. Powered USB hub is not included in this GB. * For the same reason the hashing rate will be limited to about 2.3GH/s. (This is because the device can draw no more than 500mA from a standard USB 2.0 port). At this point we estimate that we should be able to achieve roughly 2GH with those power constraints, even though the chips have demonstrated up to 3.2GH/s. It is also possible that due to those limitations we may have to run the chips at a slightly slower hashing speeds , which on the good side will be controlled via software (cgminer) and depending on your specific USB hub you might be able to squeeze out a few more hashes. * Overclocking: the board does permit some overclocking (with hardware modifications - see also “pencil mod”). Be aware though that if this exceeds the limits of your USB port your computer may just turn off the port completely. Also, with increase of speed you will get more heat. The chip and board is designed to use the back side as a heatsink, but if that’s not enough you may have to add an additional heatsink. 2. Bitfury chip distribution At the moment Bitfury chip is aviable to buy in 3 options : From Niko @ BFSB - single sample chip - 80 EUr /piec; From BFSB 65000.00 EUR for 3000 pcs reel and from Zefir 300 pcs for 108 EUR We are offering you to join together and to get a reel . You can order minimum of 1 chip @ 24 EUR per piece. 3 Delivery time As per Niko Punin message the chip are to be delivered in the beginning of October, so we have a few weeks to gather enough demand. If the chips are here early October the production of the board will take 2-3 weeks, having in mind design is working and proved. Hi, Niko, I'm trying to organize some assembly service based on 16 chip miner board. Best Regards: Martin Dear Martin, I'm sorry for delay, just got the pricing yesterday myself. Chips are available available in $90000 or 67500 + VAT per reel. We will deliver these chips in late september / early october. 4. Ordering Orders will be accepted for both miner boards and chips on our web site : technobit.eu The ordering will be open in 24 hours Payments accepted through BitPay and Wire Transfer Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distributin Post by: marto74 on September 12, 2013, 04:59:46 PM Soon We'll finish design of sheet metal enclosure for S-hash board. Also We may be offer 3-rd parity design of enclosure
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: vulgartrendkill on September 12, 2013, 05:14:51 PM very interested, how would I order?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Foofighter on September 12, 2013, 06:27:21 PM also interested!
Shipping included? also available without heatsink and fan and with slithly better price due to that? regards Foofighter Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: darkfriend77 on September 12, 2013, 06:31:58 PM timeframe ... ?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: intron on September 12, 2013, 06:52:01 PM With picture of the Blinkenlights:
https://bitcointalk.org/index.php?topic=228677.msg2796663#msg2796663 intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: whisper on September 12, 2013, 07:16:28 PM Looks like bitburnerXX realy
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 12, 2013, 07:26:36 PM OP thread updated
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: spiccioli on September 12, 2013, 07:42:50 PM OP thread updated marto74, I see a chip hashing very low from your image, chip 5, is this the same production problem of bfsb h-cards (bad soldering) or is this a problem with the chip itself? will your cards have a guaranteed minimun speed? spiccioli Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 12, 2013, 07:49:42 PM OP thread updated marto74, I see a chip hashing very low from your image, chip 5, is this the same production problem of bfsb h-cards (bad soldering) or is this a problem with the chip itself? will your cards have a guaranteed minimum speed? spiccioli as far on the very first board we soldered ASICs after the board was populated we had some issues. Today we debugged chip 1 bad soldering , but as soon it was fixed the board ran Ok with only this chip @ low speed. I'll leave it to go for a day and then We'll look 2 this. It may be also bad chip. Next week I'll have 2 more sample boards that will be populated in full production environment with 4 chips each for testing. I'll confirm minimum speed guarantee after some testing. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: gingernuts on September 12, 2013, 07:51:32 PM Very nice to see that little board of c-scape's up for sale ;D
Am I right in thinking that I can buy chips and/or boards on your site via Paypal? Cheers. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: cscape on September 12, 2013, 07:54:08 PM It's probably a problem with the chip itself. Unfortunately, there's some variation in performance of chips.
In some cases there's room for a little improvement by tweaking individual chip clock rates. I'll make a firmware update for that. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: eneloop on September 12, 2013, 08:09:59 PM software adjustable voltage would be nice.
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: vulgartrendkill on September 13, 2013, 07:35:47 AM Can I power this via a PC PSU? what connectors would I need?
Thanks Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 13, 2013, 07:56:38 AM Can I power this via a PC PSU? what connectors would I need? We'll deliver by request different cable conectionsThanks Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: vulgartrendkill on September 13, 2013, 07:59:27 AM Can I power this via a PC PSU? what connectors would I need? We'll deliver by request different cable conectionsThanks Great. Thanks :) Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: nemercry on September 13, 2013, 08:30:49 AM Looks really good.
Is there a reason why the board + assembly is more expensive, compared to burnins device ? Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 13, 2013, 08:48:49 AM Looks really good. This board is designed with durable expensive components in order to give stable OC .Is there a reason why the board + assembly is more expensive, compared to burnins device ? The chips are working @ about 2.5 - 3 Ghs each The chips are about 16 x about 23 EUR each Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: fractal02 on September 13, 2013, 09:19:58 AM This board is designed with durable expensive components in order to give stable OC . marto74, the board can be OC without coolin like H-board or with the OC we need some fans on it ? Thank you and congrat to the team ;) Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 13, 2013, 09:27:16 AM This board is designed with durable expensive components in order to give stable OC . marto74, the board can be OC without coolin like H-board or with the OC we need some fans on it ? Thank you and congrat to the team ;) We'll offer a fan and heatsink are included in the price Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: fractal02 on September 13, 2013, 09:44:38 AM @ least Fan will be required We'll offer a fan and heatsink are included in the price And with your Fan and Heatsink included, 4O gh/s is ok ? Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: intron on September 13, 2013, 09:50:37 AM @ least Fan will be required We'll offer a fan and heatsink are included in the price And with your Fan and Heatsink included, 4O gh/s is ok ? Hashing some time now at BTC-G (OC-ed): SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0 intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: fractal02 on September 13, 2013, 10:00:02 AM Hashing some time now at BTC-G (OC-ed): SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0 intron Thank you Intron. And Temp ? Is OC temp acceptable, Intron? Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Foofighter on September 13, 2013, 10:23:53 AM Hashing some time now at BTC-G (OC-ed): SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0 intron Thank you Intron. And Temp ? Is OC temp acceptable, Intron? Temp with 1 Fan is 50-55°C so no problem @40GH/s power regulator should withstand up to 120° C according to spec. and chips could also take a lot more according to punin. EDIT: I used no heatsink Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: intron on September 13, 2013, 11:28:23 AM Hashing some time now at BTC-G (OC-ed): SHASH_1 41,460.75 MH/s 3697872 (99.60%) 14992 / 0 / 0 intron Thank you Intron. And Temp ? Is OC temp acceptable, Intron? I measured 75 oC between the inductors of the power supply. The temperature of the board between the ASICs was rather low, 35 oC or something. Used a big heatsink that was cooled with forced air. The bottom side of the board was bolted to the heatsink and no thermal paste was used. intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Spotswood on September 13, 2013, 12:43:28 PM Please provide a mechanical drawing of the board so others can build cases for these. ;D
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Foofighter on September 13, 2013, 12:53:11 PM I have a custom case for that -see sig
@spotswood I can send you drwawings or 3d part of board when Iam at home. cheers Foofighter Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: eroxors on September 13, 2013, 01:16:32 PM Shipping costs to the U.S.?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 13, 2013, 01:29:55 PM There is an option in the site
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: intron on September 13, 2013, 03:56:14 PM Looks like bitburnerXX realy Nice, would love to see it. Were can I find an image of the bitburner board? intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: fractal02 on September 13, 2013, 04:50:12 PM Here :
http://198.245.60.111/Pix/20130805110401BurninBitBurnerXX.jpg and here : http://bitcoinjim.com/sites/default/files/styles/large/public/field/image/BitBurnerXX.jpg?itok=m3EOMmmC Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: cscape on September 13, 2013, 05:06:42 PM I measured 75 oC between the inductors of the power supply. I'm running the same board now without a heatsink, but just with an old undervolted fan pointed at the top of the board. Board temp is about 60 oC and running fine (41-42 GH/sec). The temperature of the board between the ASICs was rather low, 35 oC or something. Used a big heatsink that was cooled with forced air. The bottom side of the board was bolted to the heatsink and no thermal paste was used. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: braindead on September 13, 2013, 05:17:46 PM Email send for Vat order, waiting instructions
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Foofighter on September 13, 2013, 08:20:54 PM Hey marto,
could you add 4pin connection cables to you shop for chaining miners? cheers Foofighter Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: CryptoCluster on September 13, 2013, 08:46:48 PM Is the price listed with or without VAT?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Spotswood on September 14, 2013, 03:14:03 AM I have a custom case for that -see sig @spotswood I can send you drwawings or 3d part of board when Iam at home. cheers Foofighter All I need is a simple drawing. Thanks! Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Zich on September 14, 2013, 04:33:34 AM I was hoping for 8 chip version :)
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: cscape on September 14, 2013, 04:37:26 AM I was hoping for 8 chip version :) Price/performance would be worse, because of the fixed cost for the power regulator and other components. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Zich on September 14, 2013, 05:24:15 AM I was hoping for 8 chip version :) Price/performance would be worse, because of the fixed cost for the power regulator and other components. That's true, but i already run out of cash because BFL still not ship & avalon also late. :'( Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 14, 2013, 07:52:44 PM Is the price listed with or without VAT? This is full price .There is no VAT as far technobit is working as a distance sales. That's why for bigger orders I suggest to use EU VAT registered company as a customer. PM for details Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: EnJoyThis on September 15, 2013, 10:38:04 AM @marto74
I'm interested in buying up to 5 boards and would like to host it with you. Will you oc these units if they are hosted? Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 15, 2013, 01:36:52 PM @marto74 I asked C-scape for revised PCB design with copper pads on the back of the ASIC chips (Avalon style) in order to make better contact with the heatsink.I'm interested in buying up to 5 boards and would like to host it with you. Will you oc these units if they are hosted? I got it a few minutes ago. We'll order test board for this tommorow So yes in reasonable limits I'll allow OC-ed miners in the hosting facility . Martin Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: Foofighter on September 15, 2013, 01:39:19 PM Hey marto, Could you please answer that?could you add 4pin connection cables to you shop for chaining miners? cheers Foofighter Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 15, 2013, 01:41:17 PM Hey marto, Could you please answer that?could you add 4pin connection cables to you shop for chaining miners? cheers Foofighter I'll do that but first next week I have to source them Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: DeathAndTaxes on September 15, 2013, 01:53:05 PM What is power consumption?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 15, 2013, 01:57:43 PM What is power consumption? About 4 A @ 12 VSo about 50 W Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: nemercry on September 16, 2013, 01:25:41 PM Hey Marto74,
you said you will get the chips in first October week and will need 2-3 weeks to assemble the board. That means we can start hashing on first of November. Based on this information and the given price it is not possible for customers to ROI. Not even mentioned the risk if KNC, CoinTerra, Hashfast or Bitmine will start to ship between October and November. Please watch yourself: http://mining.thegenesisblock.com/a/33cfaedea5 I really like your design, but its the same discussion going on right now with Burnins Bitfury board and his new shady distributor. It is not able to get into a positive balance with that price. In my opinion there should the a golden mid when dealing in B2C fields, where both sides are able to into a green zone. All miners here are sucked by blood through BFL, Avalon and the now upcoming firms. Please share your thoughts. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 16, 2013, 01:43:15 PM Hey Marto74, The statement for 2-3 weeks is after ordering the PCByou said you will get the chips in first October week and will need 2-3 weeks to assemble the board. That means we can start hashing on first of November. Based on this information and the given price it is not possible for customers to ROI. Not even mentioned the risk if KNC, CoinTerra, Hashfast or Bitmine will start to ship between October and November. Please watch yourself: http://mining.thegenesisblock.com/a/33cfaedea5 I really like your design, but its the same discussion going on right now with Burnins Bitfury board and his new shady distributor. It is not able to get into a positive balance with that price. In my opinion there should the a golden mid when dealing in B2C fields, where both sides are able to into a green zone. All miners here are sucked by blood through BFL, Avalon and the now upcoming firms. Please share your thoughts. If the chips are here first week of OCT I'll start shipping 2 week of OCT. Regards: Martin Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: nemercry on September 16, 2013, 03:46:21 PM Hey Marto74, The statement for 2-3 weeks is after ordering the PCByou said you will get the chips in first October week and will need 2-3 weeks to assemble the board. That means we can start hashing on first of November. Based on this information and the given price it is not possible for customers to ROI. Not even mentioned the risk if KNC, CoinTerra, Hashfast or Bitmine will start to ship between October and November. Please watch yourself: http://mining.thegenesisblock.com/a/33cfaedea5 I really like your design, but its the same discussion going on right now with Burnins Bitfury board and his new shady distributor. It is not able to get into a positive balance with that price. In my opinion there should the a golden mid when dealing in B2C fields, where both sides are able to into a green zone. All miners here are sucked by blood through BFL, Avalon and the now upcoming firms. Please share your thoughts. If the chips are here first week of OCT I'll start shipping 2 week of OCT. Regards: Martin Okay so lets say people can start mining at the 3. week or OCT. If everything works as planned. But still there is a lot in common and its a big risk to buy it even when receiving it on third week of October. (After all that BFL and Avalon shit, people are sick of sharing the whole loss.) I dont want to convice you about dropping prices i want you to think this through: There are a lot of customers who planned to buy bitfury burners, but got screwed by burnins new distributor cryptX and his big margin. There is a lot of hate comming towards the good name of burnin because of false statements and (not purposely) misleading. If you are able to reduce the risk on the buyer side, by for example lowering prices, there will be much more people buying your board and giving you the trust you deserve. And if they trust you once and it worked, they will surely trust you next time on the new Project.(May it be cointerra,hashfast, bitfury or even technobit chips ;) ) You prooved with your Avalon Hex Board running at 450mhz that you are capable of doing boards. People have seen that and will recognize your name for that. So Hopefully dont make the same mistake as burnin did with his new "distributor". Regards Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 17, 2013, 05:45:29 AM We are now accepting pay pall payments
Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: oscurito23 on September 17, 2013, 01:26:45 PM Hello,
Maintain delivery forecast chips for the first week of October? thanks regards Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 17, 2013, 01:49:56 PM Hello, YesMaintain delivery forecast chips for the first week of October? thanks regards Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: vulgartrendkill on September 17, 2013, 05:09:11 PM Hey guys,
just ordered two boards. was wondering if we could have some more (possibly in focus) pictures of the board please????? Thanks :) very excited for the project!! Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: cscape on September 17, 2013, 05:15:25 PM Here are some pictures of the assembly process of a prototype, including picture of final result:
http://imgur.com/a/ZyfmB#0 Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: intron on September 17, 2013, 05:21:17 PM Hey guys, just ordered two boards. was wondering if we could have some more (possibly in focus) pictures of the board please????? Thanks :) very excited for the project!! A bit playing around at home with the prototype: https://i.imgur.com/E7QMIgi.jpg https://i.imgur.com/ZsoRhdH.jpg intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: alfabitcoin on September 17, 2013, 05:31:51 PM I have an question...
Why to make a standalone unit with arm chip what just addup to the total production host. 40ghs as stanalone would be nice to have a couple of months ago, but miners what ship in mid october should be orientated from around 80 ghs. Is there a simple way to use h-boards but to design motherboard what will be support overlocking with higher voltage regulator and where you can attach more h-boards? I am aware that ARM is not expensive but all those nice features should be only on one motherboard with extension possibility of adding more h-boards with 16 chips. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: cscape on September 17, 2013, 05:42:35 PM Well, it was made months ago, but there were no chips for sale for large scale production. Even now, the 16 bitfury chips cost 50x as much as the ARM, so it's not such a big deal.
After the chips, the most expensive component is the power regulator module, and you'll need something like that for better overclocking of the h-cards. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: alfabitcoin on September 17, 2013, 05:50:58 PM Well, it was made months ago, but there were no chips for sale for large scale production. Even now, the 16 bitfury chips cost 50x as much as the ARM, so it's not such a big deal. Yes I know, I am watching your work which is awesome. I agree with your answer. And know for 3k of chips is around 190 pcb boards what make them cost more as considered as low amount. When add parts and assambly cost, designer and marto fee there is not a lot of space for price drop. MAybe on larger scale ;)After the chips, the most expensive component is the power regulator module, and you'll need something like that for better overclocking of the h-cards. Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: LaserHorse on September 19, 2013, 08:20:21 AM Hey Martin -
Are the bare chips which are being offered @ technobit.eu already purchased? Or are payments going toward another reel which will be purchased once 3000 are sold? thnx! Title: Re: TECHNOBIT S-HASH minig board and Bitfury October delivery chip distribution Post by: marto74 on September 19, 2013, 09:29:32 AM Hey Martin - Hi ,Are the bare chips which are being offered @ technobit.eu already purchased? Or are payments going toward another reel which will be purchased once 3000 are sold? thnx! the order of the reel is made Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 21, 2013, 01:46:58 AM 1.3 Technobit NanoFury USB miner - 52 EUR
1.4 Technobit NanoFury assembly service with your chip http://s21.postimg.org/5vspbt5o3/NF1_MCP2210_v03.jpg (http://postimg.org/image/5vspbt5o3/) http://s21.postimg.org/9e4p876k3/NF11_MCP2210_v03.jpg (http://postimg.org/image/9e4p876k3/) Technical details * No external power supply is required as the board is USB2.0-powered. If you want to run multiple units via a powered external USB hub you’ll need to get that separately. Powered USB hub is not included in this GB. * For the same reason the hashing rate will be limited to about 2.3GH/s. (This is because the device can draw no more than 500mA from a standard USB 2.0 port). At this point we estimate that we should be able to achieve roughly 2GH with those power constraints, even though the chips have demonstrated up to 3.2GH/s. It is also possible that due to those limitations we may have to run the chips at a slightly slower hashing speeds , which on the good side will be controlled via software (cgminer) and depending on your specific USB hub you might be able to squeeze out a few more hashes. * Overclocking: the board does permit some overclocking (with hardware modifications - see also “pencil mod”). Be aware though that if this exceeds the limits of your USB port your computer may just turn off the port completely. Also, with increase of speed you will get more heat. The chip and board is designed to use the back side as a heatsink, but if that’s not enough you may have to add an additional heatsink. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vs3 on September 21, 2013, 07:22:33 AM This is to confirm that we've teamed up with Marto74 for the manufacturing and distribution of the NanoFury devices in the EU.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Spotswood on September 21, 2013, 12:44:58 PM What is the size of the heatsink for the 16 chip board?
And what is the keep-out area around the 4 corner mounting holes i.e. how much area is there for bolting on a mounting bracket? For example, here's a mounting bracket at the back corner, near the ASIC chips. http://i715.photobucket.com/albums/ww153/Spotswood_/BitFuryS-HASHBRACKET_zps8f946f33.jpg (http://s715.photobucket.com/user/Spotswood_/media/BitFuryS-HASHBRACKET_zps8f946f33.jpg.html) But, I'm more concerned about the two holes at the front of the board. Looks like there are some components very close to the holes ands maybe more on the other side of the board. Some simple mechanical drawings would be nice. Otherwise, some close-up pics with a ruler would probably be acceptable. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on September 21, 2013, 09:20:04 PM 1.3 Technobit NanoFury USB miner - 52 EUR 1.4 Technobit NanoFury assembly service with your chip http://s21.postimg.org/5vspbt5o3/NF1_MCP2210_v03.jpg (http://postimg.org/image/5vspbt5o3/) http://s21.postimg.org/9e4p876k3/NF11_MCP2210_v03.jpg (http://postimg.org/image/9e4p876k3/) Technical details * No external power supply is required as the board is USB2.0-powered. If you want to run multiple units via a powered external USB hub you’ll need to get that separately. Powered USB hub is not included in this GB. * For the same reason the hashing rate will be limited to about 2.3GH/s. (This is because the device can draw no more than 500mA from a standard USB 2.0 port). At this point we estimate that we should be able to achieve roughly 2GH with those power constraints, even though the chips have demonstrated up to 3.2GH/s. It is also possible that due to those limitations we may have to run the chips at a slightly slower hashing speeds , which on the good side will be controlled via software (cgminer) and depending on your specific USB hub you might be able to squeeze out a few more hashes. * Overclocking: the board does permit some overclocking (with hardware modifications - see also “pencil mod”). Be aware though that if this exceeds the limits of your USB port your computer may just turn off the port completely. Also, with increase of speed you will get more heat. The chip and board is designed to use the back side as a heatsink, but if that’s not enough you may have to add an additional heatsink. This is to confirm that we've teamed up with Marto74 for the manufacturing and distribution of the NanoFury devices in the EU. Nice to hear that! @marto74: Is there already a possible delivery date determined ? Does it differ from the US Customers ?(maybe even faster ?) Is it possible to send little batches of those, maybe up to 10 or 20, with another service than the 30€ parcel service ? Maybe a bigger mail with inner padding ? like this http://i19.ebayimg.com/04/s/000/77/52/7a6c_2.JPG Would be nice to hear some words from you on that. Regards. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on September 24, 2013, 08:45:52 PM are there any new info about shipping date?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 25, 2013, 10:44:06 PM First/second week of october
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: fractal02 on September 26, 2013, 05:39:35 AM First/second week of october Great ! Still on track. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 26, 2013, 08:26:53 AM S-hash boards orders for first/second week of October are full.
So now You can order S-hash boards from the next batch - End of October Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on September 26, 2013, 08:34:04 AM S-hash boards orders for first/second week of October are full. So now You can order S-hash boards from the next batch - End of October Does that mean that the chips are in? *crosses fingers* Oh, and have you been in touch with LUKE-JR about support on BFGMiner or do we not need this? I thought I read somewhere these have stratum support so could potentially go straight to my selected pool. Is that correct? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on September 26, 2013, 08:36:49 AM Oh, and have you been in touch with LUKE-JR about support on BFGMiner or do we not need this? I thought I read somewhere these have stratum support so could potentially go straight to my selected pool. Is that correct? The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on September 26, 2013, 08:49:25 AM Oh, and have you been in touch with LUKE-JR about support on BFGMiner or do we not need this? I thought I read somewhere these have stratum support so could potentially go straight to my selected pool. Is that correct? The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Niiiiice :) Sounds good. Cannot wait to get my boards! Is there a software option for overclocking? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on September 26, 2013, 08:53:51 AM Cannot wait to get my boards! Is there a software option for overclocking? No, the power regulator doesn't have a voltage adjust input. It is designed to be set using a feedback with 2 resistors, just like on the H-CARD. We thought about adding some extra circuitry around it, but we weren't sure that wouldn't interfere with the feedback loop. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 26, 2013, 09:20:50 AM Not yet but this closes ordered PCB's
Most of the components are here too. S-hash boards orders for first/second week of October are full. So now You can order S-hash boards from the next batch - End of October Does that mean that the chips are in? *crosses fingers* Oh, and have you been in touch with LUKE-JR about support on BFGMiner or do we not need this? I thought I read somewhere these have stratum support so could potentially go straight to my selected pool. Is that correct? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: zamot on September 26, 2013, 03:49:35 PM The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Where did you get this information. How can it work with PC off ? It needs communication to the pool. ::) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on September 26, 2013, 03:50:48 PM The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Where did you get this information. How can it work with PC off ? It needs communication to the pool. ::) He wrote the firmware, so that's why he knows. LOL:) intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: zamot on September 26, 2013, 03:55:51 PM The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Where did you get this information. How can it work with PC off ? It needs communication to the pool. ::) He wrote the firmware, so that's why he knows. LOL:) intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on September 26, 2013, 03:56:54 PM its connect to LAN - RJ45 not usb
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on September 26, 2013, 04:01:37 PM The boards have their own mining software integrated in the controller chip. You set up the pool through the web page, and it will connect directly to stratum server. This means you can turn off your PC at night to save power, if you want, while the boards keep on hashing. Where did you get this information. How can it work with PC off ? It needs communication to the pool. ::) He wrote the firmware, so that's why he knows. LOL:) intron Talking about S-HASH or bi•fury? S-HASH has it's own mining code embedded and uses Ethernet to connect to the pool. The bi•fury is a small USB device and indeed needs a PC running mining software. intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on September 26, 2013, 04:02:35 PM USB on the S-HASH board is just for troubleshooting and configuration. Main operation is through ethernet, directly from board to pool (and your cable/ADSL gateway of course).
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: zamot on September 26, 2013, 08:35:49 PM Ups, my mistake. I had in mind NF.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on September 26, 2013, 11:14:37 PM Cannot wait to get my boards! Is there a software option for overclocking? No, the power regulator doesn't have a voltage adjust input. It is designed to be set using a feedback with 2 resistors, just like on the H-CARD. We thought about adding some extra circuitry around it, but we weren't sure that wouldn't interfere with the feedback loop. So is it settled and there wont be any OC at all, or is there a chance that the design will be changed ? If OC would be possible the device would be much more competitive. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 27, 2013, 12:07:39 AM No OC with the first batch
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on September 27, 2013, 03:43:53 AM So is it settled and there wont be any OC at all, or is there a chance that the design will be changed ? If OC would be possible the device would be much more competitive. OC is still possible, but you'd have to modify a resistor value. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on September 27, 2013, 05:56:48 AM So is it settled and there wont be any OC at all, or is there a chance that the design will be changed ? If OC would be possible the device would be much more competitive. OC is still possible, but you'd have to modify a resistor value. And without over clock we can expect 32-35 gh/s range per 16 chip card? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 27, 2013, 07:53:10 AM No 38-40
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on September 27, 2013, 08:02:23 AM No 38-40 Awesome :). Sorry I was calculating on 16 chips x2gh Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on September 27, 2013, 11:29:49 AM First/second week of october Is it also for the NF Boards, or only for S-Hash. If not for the NF Boards, could you give an estimate if i order right now ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on September 27, 2013, 01:15:20 PM First/second week of october Is it also for the NF Boards, or only for S-Hash. If not for the NF Boards, could you give an estimate if i order right now ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on September 27, 2013, 01:29:28 PM First/second week of october Is it also for the NF Boards, or only for S-Hash. If not for the NF Boards, could you give an estimate if i order right now ? Okay thanks, will order as fast as possible than. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on September 30, 2013, 06:26:31 PM Any updates on chips Marto?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: eroxors on September 30, 2013, 06:39:20 PM Are there other shipping options to the USA? 50+ euros is pretty steep for a few USB miners. Anyone doing a group-buy?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: prehistoric on September 30, 2013, 10:22:38 PM Are there other shipping options to the USA? 50+ euros is pretty steep for a few USB miners. Anyone doing a group-buy? For U.S. based GB look here https://bitcointalk.org/index.php?topic=291456.0 - Oct/1 - End of pre-order.Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 02, 2013, 07:26:14 AM Hello marto74
I'm going to place an order today and tomorrow. I would like to know what kind of costs would be for Spain. I did purchase simulation tells me cost only € 2. thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: chup on October 02, 2013, 08:45:20 AM Hello marto74 I'm going to place an order today and tomorrow. I would like to know what kind of costs would be for Spain. I did purchase simulation tells me cost only € 2. thanks regards Asked the same for Macedonia via PM, but haven't received answer. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 02, 2013, 11:26:56 AM Hi,
All 2 EUR option is : Quote Only packing for custom shippin by your request No delivery just packing- choose for custom shipping or bigger orders The best price With this option you can organize your transport this is just packing and handling. Other options are with DPD Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 02, 2013, 11:54:00 AM Hey Marto,
any update on chip delivery and production? THanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 02, 2013, 01:55:00 PM Hi, All 2 EUR option is : Quote Only packing for custom shippin by your request No delivery just packing- choose for custom shipping or bigger orders The best price With this option you can organize your transport this is just packing and handling. Other options are with DPD Hello, I get to the shipping and delivery choose 30 € Road DPD. But at checkout, not available to pay with paypal. Why? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: braindead on October 02, 2013, 02:24:41 PM Hello Please answer my email, i have a company in EU and would like to make a purchase Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: OUTSIDE on October 02, 2013, 02:54:19 PM 2 questions: why not paypal?
And: if I buy today... When receives? This month or November? I'm from Spain too Thx! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ProudMiner on October 02, 2013, 02:56:17 PM Hi, I have 2 bitfurry chips and I want to send them to you for NanoFury USB bitcoin miner, but I can only pay you using Paypal.
Are you planning on adding paypal as payment option?? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Japs2013 on October 02, 2013, 07:20:38 PM Marto can you please answer the comments in order WVEJQUSTR? I am still waiting to pay until I get a further instruction or confirmation.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: eroxors on October 02, 2013, 07:38:38 PM Can nanofury USBs be hosted? If so, what is the cost?
Thanks, Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 07, 2013, 05:57:52 AM Update 7-Oct-2013
In Saturday the trough hole assembly of the first batch PCB's ( paid orders before 30-Aug-13) was finished. @ the moment the boards are assembled to heatsinks, fans , uploded with firmware and tested for 24 hours. The very first shipments of thei batch to be sent out tomorrow 8-Oct-2013 and last one shiped out until Friday. The second batch of PCB's enter in PnP today most probably it will be together with 3-rd batch of PCB's , that are here already. NanoFury USB Bitfury based miner the first 200 boards to be on the PnP machine until Friday, so first shipments in a week. S-hash - First units to be shiped out Friday Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gingernuts on October 07, 2013, 08:47:47 AM I see you have run out of bare Bitfury chips - do you have any plans to get some more in, or are you just going to be selling boards from now on?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 07, 2013, 09:56:27 AM Hello,
By my calculation on order number you have 180 orders. Could be updating that order numbers will come out per day? thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 09, 2013, 06:28:27 AM Hello, By my calculation on order number you have 180 orders. Could be updating that order numbers will come out per day? thanks ??? ??? ??? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 09, 2013, 06:58:19 AM I've just received an email update stating that hex16a boards are starting to ship.
THese are different to the s hash arent they? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 09, 2013, 07:42:53 AM I've just received an email update stating that hex16a boards are starting to ship. THese are different to the s hash arent they? Yes, they are different Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 09, 2013, 07:51:17 AM So, Marto, any update on shipping for fully assembled s-hash boards?
Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on October 09, 2013, 09:30:36 AM Hey Marto,
are there any problems with bank wire transfers ? At my bank office they told me that SEPA would take at max 2 days to proceed. I payed my order ACPRJFBMC last Friday but till now it says still "awaiting payment". Would it be better to pay with paypal instead of bankwire ? I just want to assure to get my order as fast as possible and wanted to be in the first batch. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 10, 2013, 07:16:48 AM Hi Marto,
Hello, At this time I have ordered a S-HASH with delivery in late October, is possible extend the order to 2 units? as would have to do? thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 10, 2013, 07:23:20 PM Marto please update.....
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 11, 2013, 08:47:54 AM Hello all,
I've just checked my order (paid 17/sept/13) for 2 fully assembled and populated S Hash boards and the status is "Preparation in progress" which I take it means prep for dispatch? Looks like units are on the move. Hope this helps. Check your accounts guys :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 11, 2013, 08:57:04 AM Hello all, I've just checked my order (paid 17/sept/13) for 2 fully assembled and populated S Hash boards and the status is "Preparation in progress" which I take it means prep for dispatch? Looks like units are on the move. Hope this helps. Check your accounts guys :) +1 First Week October order? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 11, 2013, 09:17:54 AM Hello all, I've just checked my order (paid 17/sept/13) for 2 fully assembled and populated S Hash boards and the status is "Preparation in progress" which I take it means prep for dispatch? Looks like units are on the move. Hope this helps. Check your accounts guys :) +1 First Week October order? Yes 1st/2nd week october order. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 11, 2013, 09:41:22 AM Marto please update..... Best way to do it place a new order and a comment to be shipped wit first one choose only packingTitle: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gingernuts on October 11, 2013, 06:30:08 PM Hi Marto - are you planning to buy and sell off any more reels of Bitfury chips?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 14, 2013, 08:46:40 AM News? ;D ;D ;D
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 14, 2013, 08:51:29 AM News? ;D ;D ;D My order AKWFBLMUZ is still showing as Preparation in progress, but a note was added saying it would be picked up by courier service on 12/10/13. No tracing number on my order as yet. Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on October 14, 2013, 09:02:43 AM Still waiting for some response with nanofurys and hex boards.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 14, 2013, 09:07:03 AM Still waiting for some response with nanofurys and hex boards. HEX boaards are shiped every dayNano furies are in production Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nemercry on October 14, 2013, 09:42:23 AM Still waiting for some response with nanofurys and hex boards. HEX boaards are shiped every dayNano furies are in production The Order status tells me "ACPRJFBMC 2013-10-04 xxx,xx€ Bank Wire Awaiting bank wire payment" since more then 10 days now. So can i still assume that my nanofurys are in production ? Payment also was also sent more then 10 days ago. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on October 14, 2013, 11:10:49 AM Technobit dont respond to emails... I dont trust :S
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 14, 2013, 04:47:24 PM Technobit dont respond to emails... I dont trust :S Marto posted this info over on another thread earlier... Hi, all, All the boards ordered before 30-Aug are shiped/packed . this will end tommorow The next orders passed PnP now @ trough hole assembly and testing, will start shipping this week. Nanofuries boards are here and go on PnP S-hash boards trough hole/testing, first orders to be shipped tommorow From this I would assume that s hash boards are tested and ready to be picked up by dpd or other courier. Correct Marto? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 14, 2013, 04:53:04 PM Technobit dont respond to emails... I dont trust :S You got an answer to your mails, but may be You do not like it.There will be no special discount , sorry Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Japs2013 on October 15, 2013, 08:02:05 PM Marto can you please answer the comments in order WVEJQUSTR? I am still waiting to pay until I get a further instruction or confirmation. Marto can you confirm that you will combine the wire payment for order WVEJQUSTR with the earlier paid but cancelled order GSBSLDYGI? I still see no change in the order statuses.. I've sent three ticket messages within the order during the last 3 weeks but haven't had any response. I hope you understand I'm a bit worried about the status of my order. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 17, 2013, 07:56:17 AM Marto can you please answer the comments in order WVEJQUSTR? I am still waiting to pay until I get a further instruction or confirmation. Marto can you confirm that you will combine the wire payment for order WVEJQUSTR with the earlier paid but cancelled order GSBSLDYGI? I still see no change in the order statuses.. I've sent three ticket messages within the order during the last 3 weeks but haven't had any response. I hope you understand I'm a bit worried about the status of my order. I too am worried about my order. It feels like I am being fed in accurate information. I have received this note on my order Martin Sirakov 2013-10-11 11:01:01 Your order is testing.To be picked up tomorrow morning And today I have been told that s hash boards are still being built, but some are indeed already shipped. I was also told that my order will be dispatched today on Tuesday. I asked Marto directly what the staus is of my particular order and he appeared to dodge the question. Apparently the hold up is optimisation for btc guild. I have no Idea why on earth they would do that as I requested they put details on for my pool of choice. I will never use btc guild so why put that on? Anyway, I've been told three different things, all seemingly inaccurate or worst case, lies. I know marto is a good guy and these products are very good but I just want the truth. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 17, 2013, 12:50:28 PM Has anyone elses order been updated with dispatched?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 17, 2013, 07:38:39 PM Hi,
All Until an hour before the built in miner for S-has was updated to work with current changes with some of the popular pools (BTC gulid, Eligius). Now it seems that S-hash firmware is runing OK. So shipment starts tommorow. Nano furies are still in production. I hope We'll be able to start shipping too. Please be patient . @ the moment We are shipping about 30 to 50 orders every day. Some times We miss your e-mails, sorry for that. Most updated info is sent via newsletter almost everyday Best Regards: Martin Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 17, 2013, 08:28:47 PM Hi, All Until an hour before the built in miner for S-has was updated to work with current changes with some of the popular pools (BTC gulid, Eligius). Now it seems that S-hash firmware is runing OK. So shipment starts tommorow. Nano furies are still in production. I hope We'll be able to start shipping too. Please be patient . @ the moment We are shipping about 30 to 50 orders every day. Some times We miss your e-mails, sorry for that. Most updated info is sent via newsletter almost everyday Best Regards: Martin Thank you for the update martin. Very much appreciated. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: djjoseypatry on October 18, 2013, 04:55:18 AM hello usb are ready to run?
or you have to buy the chip apart? or usb with the price of 52 euros and will includes the chip and everything? ready to run have someone help me thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 18, 2013, 05:34:50 AM hello usb are ready to run? 52 Eur and it's ready to run or you have to buy the chip apart? or usb with the price of 52 euros and will includes the chip and everything? ready to run have someone help me thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 21, 2013, 08:56:27 AM Good morning Marto
Could you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 22, 2013, 09:34:44 AM Good morning Marto Could you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 22, 2013, 09:48:31 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 22, 2013, 09:52:25 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Thanks for the info! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 22, 2013, 09:57:49 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards And my order, 2nd week of october? AKWFBLMUZ noted as preperation in progress since 11 october? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 22, 2013, 10:03:20 AM I'll update tracking NO today
Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards And my order, 2nd week of october? AKWFBLMUZ noted as preperation in progress since 11 october? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 22, 2013, 10:13:59 AM So my order has been shipped? I'll update tracking NO today Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards And my order, 2nd week of october? AKWFBLMUZ noted as preperation in progress since 11 october? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 22, 2013, 03:53:41 PM So my order has been shipped? I'll update tracking NO today Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards And my order, 2nd week of october? AKWFBLMUZ noted as preperation in progress since 11 october? Please check your account Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 22, 2013, 04:54:45 PM Got it.
Thanks marto :) So my order has been shipped? I'll update tracking NO today Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards And my order, 2nd week of october? AKWFBLMUZ noted as preperation in progress since 11 october? Please check your account Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: djjoseypatry on October 22, 2013, 08:46:26 PM when you arrive you can put a picture to see them? To those who have purchased
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on October 23, 2013, 09:31:16 AM Hey guys,
if someone is interested in custom cases for SHash Miners, I have also some available to sell here: (Only 8 pcs left) https://bitcointalk.org/index.php?topic=290328.0 cheers Foofighter Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 25, 2013, 04:22:12 AM hi there marto,
my shipped package has now been with speedybg for 3 days no movement. could you maybe chase up for me? 60048244555 is the package no. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 25, 2013, 10:58:21 AM hi there marto, my shipped package has now been with speedybg for 3 days no movement. could you maybe chase up for me? 60048244555 is the package no. Well, my package actually arrived today, so no worries :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 26, 2013, 07:50:48 AM hi there marto, my shipped package has now been with speedybg for 3 days no movement. could you maybe chase up for me? 60048244555 is the package no. Well, my package actually arrived today, so no worries :) Marto, one of the chips on my boards only hashes between 0.5 and 1.0 gh\s, any ideas? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 26, 2013, 08:04:02 AM hi there marto, my shipped package has now been with speedybg for 3 days no movement. could you maybe chase up for me? 60048244555 is the package no. Well, my package actually arrived today, so no worries :) Marto, one of the chips on my boards only hashes between 0.5 and 1.0 gh\s, any ideas? All boards coming out are tested for this. About 3-5 % of the bitfury chips have this problem , so we are replacing them. The solution I can offer you is to exchange the board with new one. When the second batch is ready next week I'll contact you in order to send you new one and you send this one back to us. The transport will be on our account. Let this one hash with you for the moment. sometimes it start hashing stable again with time. OK ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 26, 2013, 09:11:02 AM hi there marto, my shipped package has now been with speedybg for 3 days no movement. could you maybe chase up for me? 60048244555 is the package no. Well, my package actually arrived today, so no worries :) Marto, one of the chips on my boards only hashes between 0.5 and 1.0 gh\s, any ideas? All boards coming out are tested for this. About 3-5 % of the bitfury chips have this problem , so we are replacing them. The solution I can offer you is to exchange the board with new one. When the second batch is ready next week I'll contact you in order to send you new one and you send this one back to us. The transport will be on our account. Let this one hash with you for the moment. sometimes it start hashing stable again with time. OK ? Thank you marto this would be great. Thanks for the quick response. Other than that, its an amazing product! really well done to you and team. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Japs2013 on October 26, 2013, 10:24:58 PM Marto can you please answer the comments in order WVEJQUSTR? Marto can you confirm that you will combine the wire payment for order WVEJQUSTR with the earlier paid but cancelled order GSBSLDYGI? I still see no change in the order statuses.. I've sent three ticket messages within the order during the last 3 weeks but haven't had any response. I hope you understand I'm a bit worried about the status of my order. Marto can you please answer the comments in order WVEJQUSTR? I'm simply asking to cancel order GSBSLDYGI (as emailed by you on 23th of september) and to merge the payment with order WVEJQUSTR. The amount due was already paid by wire transfer on the 7th of october. I'm sorry for using the forum for this, but it kind of annoys me that I'm not getting any response after emailing on the 23th of september, 27th of september and the 12th of october; plus sending forum messages on the 2nd and 15th of october! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Japs2013 on October 27, 2013, 02:31:44 PM Marto can you please answer the comments in order WVEJQUSTR? Marto can you confirm that you will combine the wire payment for order WVEJQUSTR with the earlier paid but cancelled order GSBSLDYGI? I still see no change in the order statuses.. I've sent three ticket messages within the order during the last 3 weeks but haven't had any response. I hope you understand I'm a bit worried about the status of my order. Marto can you please answer the comments in order WVEJQUSTR? I'm simply asking to cancel order GSBSLDYGI (as emailed by you on 23th of september) and to merge the payment with order WVEJQUSTR. The amount due was already paid by wire transfer on the 7th of october. I'm sorry for using the forum for this, but it kind of annoys me that I'm not getting any response after emailing on the 23th of september, 27th of september and the 12th of october; plus sending forum messages on the 2nd and 15th of october! This morning the statuses changed to the correct values, thanks! :D Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on October 28, 2013, 09:54:18 AM Is it possible to OC the S-hash board?
If so what steps need to be taken? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on October 28, 2013, 10:22:44 AM Is it possible to OC the S-hash board? If so what steps need to be taken? Yes, reduce the value of R01T. Even pencil modding might work. But be careful not to fry your board:) In this datasheet this resistor is called 'Rtrim': http://www.lineagepower.com/oem/pdf/APTS050A0X.pdf intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 28, 2013, 10:43:39 AM marto, all,
Is it possible to divide the hash power of the boards between two pools? I added a 2nd pool and it appears that all the hashing has now been put towards the 2nd pool. Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on October 28, 2013, 10:55:51 AM Is it possible to OC the S-hash board? If so what steps need to be taken? Yes, reduce the value of R01T. Even pencil modding might work. But be careful not to fry your board:) In this datasheet this resistor is called 'Rtrim': http://www.lineagepower.com/oem/pdf/APTS050A0X.pdf intron Hi intron, which hashrates are possible, what do you think? Of course with heatsink and appropriate cooling. cheers Foofighter Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on October 28, 2013, 11:27:53 AM Is it possible to OC the S-hash board? If so what steps need to be taken? Yes, reduce the value of R01T. Even pencil modding might work. But be careful not to fry your board:) In this datasheet this resistor is called 'Rtrim': http://www.lineagepower.com/oem/pdf/APTS050A0X.pdf intron Hi intron, which hashrates are possible, what do you think? Of course with heatsink and appropriate cooling. cheers Foofighter No idea, never tried higher then 41..42 GH. Then my board was taken out of my hands for firmware development:) intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: malvino on October 28, 2013, 11:30:33 AM Hi!
Looking at your website, can you please tell me the difference between the 461€, 695€ and 720€ miners? Thanks! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on October 28, 2013, 11:35:54 AM Is it possible to OC the S-hash board? If so what steps need to be taken? Yes, reduce the value of R01T. Even pencil modding might work. But be careful not to fry your board:) In this datasheet this resistor is called 'Rtrim': http://www.lineagepower.com/oem/pdf/APTS050A0X.pdf intron Hi intron, which hashrates are possible, what do you think? Of course with heatsink and appropriate cooling. cheers Foofighter No idea, never tried higher then 41..42 GH. Then my board was taken out of my hands for firmware development:) intron Ok, i will leave it , not really worth the risk. Maybe someone tries and we see good results. Foofighter Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 28, 2013, 11:38:44 AM Hi! Looking at your website, can you please tell me the difference between the 461€, 695€ and 720€ miners? Thanks! 461€ Not S-hash, need Raspberry or similar. 695€ and 720€ Same s-hash board, differences are time October-November , on bitcoin time is money.... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on October 28, 2013, 12:16:17 PM So for oc there is no software update needed? Just changing the resistor will do?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on October 28, 2013, 12:19:33 PM So for oc there is no software update needed? Just changing the resistor will do? Correct. The speed of the chips automatically goes up with the voltage, so if you reduce the resistor, it increases the voltage, and the speed of the internal oscillators. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on October 28, 2013, 12:20:03 PM So for oc there is no software update needed? Just changing the resistor will do? Yes. Just (carefully) increase the output voltage of the DC/DC converter. intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on October 28, 2013, 12:47:46 PM Thx ;)! What are the Max output values i should respect 0.9v?
Ps: what voltage is the standard output for the s-hash? 0.7v Should i power the s-hash with 12V or go to 5V? If i look at datasheet the 4,5v input is a bit more efficiënt ... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: malvino on October 28, 2013, 02:26:03 PM The miners come with the chips included?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 28, 2013, 04:52:18 PM The miners come with the chips included? Yes , All btifury onesTitle: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on October 28, 2013, 05:06:24 PM I measured the standard voltage: 0.842V is this ok?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 28, 2013, 05:51:10 PM Hi all,
today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on October 28, 2013, 06:15:45 PM allright i changed the resistor from 100K to 68K 0.842V to 0.910V. @41 GH/s
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: basd82 on October 28, 2013, 06:45:44 PM Hi all, today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping The color is off http://technobit.eu/img/p/8/4/84-home_default.jpg Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: baros008 on October 28, 2013, 07:01:52 PM Hi Marto,
so NanoFuries will come with heatsink included? In the shop is written that there will be no housing or heatsink. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vs3 on October 28, 2013, 07:10:23 PM The color is off http://technobit.eu/img/p/8/4/84-home_default.jpg I guess I can take the blame for that :-) In the PCB design software there is no (easy) way to tell it what the "green mask" color will be and it presumes that it will be "red" ... even though the name says it all... :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: braindead on October 28, 2013, 07:10:58 PM Noone answers emails ?? I´ve send 2 emails throught website and no answer so far, some days passed Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 28, 2013, 07:18:48 PM Noone answers emails ?? I´ve send 2 emails throught website and no answer so far, some days passed there are newsletter for that. Sorry again We are a little bit busy last few weeks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: braindead on October 28, 2013, 07:24:27 PM Nops , i want to make a purchase without VAT, it specifies on the website :
"If You are EU VAT registered company , please contact us before ordering" Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: crazyearner on October 28, 2013, 07:34:50 PM When will you reduce your prices for units as Avalon charge half the price for 60GH now.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: basd82 on October 28, 2013, 07:44:12 PM Hi all, today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping I hope you learn to make beter estimate about the time before shipping. First you say this week (the week of 15 oktober) Then you say last week.... Now you say this week... i hope so Also get someone that answers mail. You say on the site Quote CONTACT OUR EXPERT SUPPORT TEAM! 24/7 support hotline mail office@nospam.com Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dnaleor on October 28, 2013, 08:03:08 PM Hi all, today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping nice! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 28, 2013, 09:18:45 PM Nops , i want to make a purchase without VAT, it specifies on the website : All prices are without VAT , Technobit is operating as Distance sales , so no VAT for induviduals in EU."If You are EU VAT registered company , please contact us before ordering" In order to keep turnover low, for bigger orders we invoice from our VAT registered company OK? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 28, 2013, 09:19:52 PM Hi all, today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping I hope you learn to make beter estimate about the time before shipping. First you say this week (the week of 15 oktober) Then you say last week.... Now you say this week... i hope so Also get someone that answers mail. You say on the site Quote CONTACT OUR EXPERT SUPPORT TEAM! 24/7 support hotline mail office@nospam.com Thank you for the input Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: malvino on October 29, 2013, 10:19:16 AM Hi!
I've sent you an email asking for the shipping prices to Santa Cruz de Tenerife (Canary Islands, Spain. 38111). I didn't finish the buy because it isn't clear for me what option is the one i have to choice. Thanks! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 29, 2013, 06:11:35 PM Hi! Your option is DPD AIR or no shiping just packingI've sent you an email asking for the shipping prices to Santa Cruz de Tenerife (Canary Islands, Spain. 38111). I didn't finish the buy because it isn't clear for me what option is the one i have to choice. Thanks! With the second one You'll have to organize transport (TNT/UPS/DHL) and sent for the package Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on October 29, 2013, 06:56:13 PM Marto may I have an update for order HFMVSSLMO?
Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 29, 2013, 08:14:14 PM hi all,
I am just curious, both of my fans on my miners are serving to blast air onto the heatsink ,and I was thinking of swapping them over so they blow air away. Would this enable cooler miners or no difference? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on October 29, 2013, 09:20:40 PM hi all, We try this , same resultI am just curious, both of my fans on my miners are serving to blast air onto the heatsink ,and I was thinking of swapping them over so they blow air away. Would this enable cooler miners or no difference? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on October 29, 2013, 09:36:34 PM hi all, We try this , same resultI am just curious, both of my fans on my miners are serving to blast air onto the heatsink ,and I was thinking of swapping them over so they blow air away. Would this enable cooler miners or no difference? Thanks Thanks marto :) Do you think getting a higher CFM fan would mean the chips are able to stay at 2.7 each? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 30, 2013, 08:20:58 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Good morning Marto Can you confirm that this order be sent today? thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on October 30, 2013, 04:57:49 PM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Good morning Marto Can you confirm that this order be sent today? thanks regards Same for order HFMVSSLMO.. please confirm Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on October 31, 2013, 08:42:01 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Good morning Marto Can you confirm that this order be sent today? thanks regards +1 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vgo on November 01, 2013, 09:29:34 AM Good morning Marto Your order is last week of October batch , to be sent until 30-OctoberCould you give me an estimated date for dispatch of the order:XALIFWTCJ thanks regards Regards Good morning Marto Can you confirm that this order be sent today? thanks regards +1 +1 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 01, 2013, 09:56:55 AM This is getting quite boring now: can you tell why my end of october order has not been shipped?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 01, 2013, 12:46:37 PM Hi Marto
If these orders of the last week of October, are not shipped on next Monday, this will not be profitable. Please show me and ask for a refund. thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 01, 2013, 05:21:51 PM Hi,
All We spent most of the day preparing shipments of S-hash and nanofuries. The DPD curier just picked most of end of October orders. The tracking numbers will be updated in your accounts later tonight or tommorow. Now I m going home Best Martin Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: adami on November 01, 2013, 05:43:54 PM Order Reference SICRTOPRS -- placed on 2013-09-21.
Give me back my money and for order and delivery fee. I do not need delivery by post. I paid for the fast. You can not provide it, return the money. I am of you for the loss. >:( Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 01, 2013, 05:54:13 PM Order Reference SICRTOPRS -- placed on 2013-09-21. HI,Give me back my money and for order and delivery fee. I do not need delivery by post. I paid for the fast. You can not provide it, return the money. I am of you for the loss. >:( I'm sorry for that just Russian Customs do not allow anything else except letter (scanned if it is a paper) to a private person. I've asked you a few times to provide a company address, but you sent me extract from Russian laws instead . In reality no Transport company is willing to accept non document sending to Russia for private persons. So your nano furies are ready packed for the last week, so I did my part of the deal and I'm trying to find a solution for transport to you. In the end I'm thinking to exclude Russia from the countries for delivery. You paid for order without delivery in the beginning , that is local pick up !! Then you asked for UPS , but when it come to shipment they refused to take sending for private person .I've asked for this several times Please provide me company address in Russia and I'll organize the transport in my account OK ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: adami on November 01, 2013, 06:19:01 PM What kind of company I give you the address? Any company which predetsya burden will fall on the customs and pay another 500 euros for rastomazhivanii any cargo and ask for money from me. And I will pay 1,100 euros for your goods. I'm not mad! I immediately sent the money when asked you to clarify the possible methods of delivery and cost. You ignored my request. And if you found it is not possible to deliver the goods quickly gave me back my money. Then he took the money and more for shipping and again have not fulfilled their promise. I do not want to argue with you. Returns me money. And prday their goods in Bulgaria where you can deliver it with no problems. FULL REFUND!
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 01, 2013, 06:27:06 PM What kind of company I give you the address? Any company which predetsya burden will fall on the customs and pay another 500 euros for rastomazhivanii any cargo and ask for money from me. And I will pay 1,100 euros for your goods. I'm not mad! I immediately sent the money when asked you to clarify the possible methods of delivery and cost. You ignored my request. And if you found it is not possible to deliver the goods quickly gave me back my money. Then he took the money and more for shipping and again have not fulfilled their promise. I do not want to argue with you. Returns me money. And prday their goods in Bulgaria where you can deliver it with no problems. FULL REFUND! OkYou have it!!! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: adami on November 01, 2013, 06:30:25 PM Ok for the goods the money came from. Where 70 euros for delivery?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 01, 2013, 06:35:46 PM Ok for the goods the money came from. Where 70 euros for delivery? give me payment Paypal addressTitle: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 01, 2013, 06:45:46 PM What's "preparation in progress" means?
Did you send my order or not since I cannot see any tracking code for the shipment Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 01, 2013, 06:51:02 PM What's "preparation in progress" means? This mean packed and ready for carrier.Did you send my order or not since I cannot see any tracking code for the shipment There are to many orders so our shipping coordinator is behind with entering the info in the back office. That's why I write that all statuses will be updated tonight or tomorrow including the tracking info. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 01, 2013, 06:52:13 PM What's "preparation in progress" means? This mean packed and ready for carrier.Did you send my order or not since I cannot see any tracking code for the shipment There are to many orders so our shipping coordinator is behind with entering the info in the back office. That's why I write that all statuses will be updated tonight or tomorrow including the tracking info. Okay, thanks Marto Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 02, 2013, 08:30:35 AM Order DXMSSBDSH Waiting from 13 OCt for just assembly Marto will i really get my board on same time of November Order or what? will i get compensated for that ? I ordred hosting as well thinking that it will be faster to plug than ship it but i am get it wrong i think !
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 03, 2013, 10:18:34 AM What's "preparation in progress" means? This mean packed and ready for carrier.Did you send my order or not since I cannot see any tracking code for the shipment There are to many orders so our shipping coordinator is behind with entering the info in the back office. That's why I write that all statuses will be updated tonight or tomorrow including the tracking info. Still not updated Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 03, 2013, 12:04:19 PM What's "preparation in progress" means? This mean packed and ready for carrier.Did you send my order or not since I cannot see any tracking code for the shipment There are to many orders so our shipping coordinator is behind with entering the info in the back office. That's why I write that all statuses will be updated tonight or tomorrow including the tracking info. Still not updated +1 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 04, 2013, 11:37:05 AM Good morning marto
You can confirm by PM or update my profile tracking number for order: XALIFWTCJ thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 04, 2013, 11:56:49 AM update
I have already tracking number, but on the DPD website asked me if I try to search for user and password ???? Anyone know that can happen? thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 04, 2013, 12:06:27 PM update I have already tracking number, but on the DPD website asked me if I try to search for user and password ???? Anyone know that can happen? thanks regards No tracking number for me Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 04, 2013, 12:37:02 PM No tracking number for me too...
Maybe the tracking number is reserved to some delivery mode (i've choosed "Economy" for an EU delivery). Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 04, 2013, 01:11:50 PM No tracking number for me too... I do not know.. I chose Express deliveryMaybe the tracking number is reserved to some delivery mode (i've choosed "Economy" for an EU delivery). Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: fydel on November 04, 2013, 01:58:09 PM I have already tracking number, but on the DPD website asked me if I try to search for user and password Same problem for me. Can someone please give a hint on how to check the tracking? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 04, 2013, 03:44:13 PM http://www.speedy.bg/?lang=en
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: fydel on November 04, 2013, 04:26:33 PM http://www.speedy.bg/?lang=en Great! Thank you! I was lost on the DPD homepage. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: AFox on November 04, 2013, 04:57:13 PM Is this company really legit ?
There's no terms and conditions on the website and it seems to be a company from Bulgaria. Legal notice : http://technobit.eu/index.php?id_cms=2&controller=cms&id_lang=1 http://www.anony.ws/i/2013/11/04/ocTzV.png Terms and conditions : http://technobit.eu/index.php?id_cms=3&controller=cms&id_lang=1 http://www.anony.ws/i/2013/11/04/EZh5X.png About us : http://technobit.eu/index.php?id_cms=4&controller=cms&id_lang=1 http://www.anony.ws/i/2013/11/04/YUi7.png Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 04, 2013, 05:04:25 PM Yes,
We are in Bulgaria. There are companies in Bulgaria you know. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 04, 2013, 05:07:46 PM Yes, We are in Bulgaria. There are companies operating in Bulgaria you know. Techno bit is a company Registered in Bulgarian Trade register. And Bulgaria is part of EU. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ampu on November 04, 2013, 05:15:19 PM Still waiting for tracking code marto..
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: AFox on November 04, 2013, 05:20:53 PM Yes, We are in Bulgaria. There are companies operating in Bulgaria you know. Techno bit is a company Registered in Bulgarian Trade register. And Bulgaria is part of EU. Good thing you are part of EU. You should know the EU regulations (http://en.wikipedia.org/wiki/Electronic_Commerce_Regulations_2002) : Quote Obligations Imposed Upon the Seller Before the contract is formed, the seller must state in a "clear, comprehensible and unambiguous manner" the technical step involved to place an order. Terms and conditions under which the contract is concluded must be made available to the consumer. Also you must display the name of your business, the company registration number (or proprietor's name), geographical address (not a PO Box number), contact information e.g., telephone number and email address, VAT registration number (if registered). Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 04, 2013, 05:27:40 PM Yes, We are in Bulgaria. There are companies operating in Bulgaria you know. Techno bit is a company Registered in Bulgarian Trade register. And Bulgaria is part of EU. Good thing you are part of EU. You should know the EU regulations (http://en.wikipedia.org/wiki/Electronic_Commerce_Regulations_2002) : Quote Obligations Imposed Upon the Seller Before the contract is formed, the seller must state in a "clear, comprehensible and unambiguous manner" the technical step involved to place an order. Terms and conditions under which the contract is concluded must be made available to the consumer. Also you must display the name of your business, the company registration number (or proprietor's name), geographical address (not a PO Box number), contact information e.g., telephone number and email address, VAT registration number (if registered). If we sign a contract you'll get this info of course. Also trade register info is public Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 04, 2013, 05:29:00 PM Still waiting for tracking code marto.. Look your account pageTitle: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 05, 2013, 08:23:48 AM Good morning Marto
Although I have the tracking number I can not see my ship in any site. You could put the exact link that I have to log in to see it? Neither DPD or SEUR (spain) or Speedy, appears if I put my tracking number. thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 05, 2013, 09:59:47 AM Hello
Some have tracking number and shipping by DPD economy (road), has managed to track? I could say as? thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vgo on November 05, 2013, 10:18:05 AM Hello Some have tracking number and shipping by DPD economy (road), has managed to track? I could say as? thanks regards +1 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on November 05, 2013, 11:00:09 AM Tracking number didn't work with dpd - but the parcel has arrived today!
On the package is a paper from "speedy. Tracking works with www.speedy.bg Edit: maybe reading is a bit difficult - its bulgarian (i think so^^) hope this helps..... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 05, 2013, 11:11:49 AM Tracking number didn't work with dpd - but the parcel has arrived today! On the package is a paper from "speedy. Tracking works with www.speedy.bg hope this helps..... Date of your order marked as shipped? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on November 05, 2013, 11:13:14 AM Payment was on 22.9.2013 - only 2 Nanofury
Marked as shipped on 31.10.2013 - 3 working days from Bulgaria to Austria Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on November 05, 2013, 01:26:43 PM is there a discription how to start the nanofury's on Minepeon?
i hoped the sticks would be able to plug and play.... Does cgminer work with this sticks too? (on windows) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: prehistoric on November 05, 2013, 05:45:01 PM Does cgminer work with this sticks too? (on windows) bfgminer does https://bitcointalk.org/index.php?topic=291456.msg3391471#msg3391471 at least for now.Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 05, 2013, 06:28:46 PM Still no news for my order that i did on 13 TH OCTOBER and now no answer from Marto !
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 06, 2013, 08:30:30 AM We are midway through the 1st week of november, I paid for 2 boards for last week of october delivery. Considering that these boards will be earning much less now that the difficulty raised another 30% today. That is not what I was expecting and I haven't even received a tracking yet. At this rate, I would like a refund because by the time I get them, they will certainly not ROI for a very long time, if at all.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vs3 on November 06, 2013, 09:49:32 AM Does cgminer work with this sticks too? (on windows) bfgminer does https://bitcointalk.org/index.php?topic=291456.msg3391471#msg3391471 at least for now.I'm guessing Marto74 may provide some additional instructions so in the mean time that could be a good start: Sample usage instructions: Get the latest BFGMINER - e.g. from this link: http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=bfgminer I did my tests with this version: http://luke.dashjr.org/tmp/code/webisect/wr/6e770d6c7c3ffbca03c4a1eaf25cfafc77542fc4-win32.zip http://luke.dashjr.org/tmp/code/webisect/wr/6e770d6c7c3ffbca03c4a1eaf25cfafc77542fc4-win64.zip sample command line: bfgminer.exe -o stratum+tcp://mint.bitminter.com:3333 -u vs3_nanofury1 -p nanofury1 -G -S all --set-device NFY:osc6_bits=52 The last parameter overwrites the speed bits. A note of caution - the "safe" speed is around 50 bits, so anything over that will likely use more power than what the USB2.0 specs permit. No two chips are the same, so the upper limit will probably be different for each device. On my devices it was around 52-54. Two things have been happening with my devices when I go over the limit - 1) when they overheat hashrate drops significantly - like 0.3-0.5GH, and 2) if the hub can't provide enough power (and voltage drops below 3.6-3.8V) that just ruins the USB communication and the device appears to have disconnect - beware that the bitfury chip will still have enough power (it needs 1V) and will continue to work even though the PC doesn't "see" the device, so you'll need to unplug it and plug it back in. Please be careful when handling them - THEY WILL BE HOT!!! and especially even more if you push them. DO NOT TOUCH THE HEATSINKS when they work - heatsinks may reach over 80C! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 06, 2013, 10:28:06 AM Hello
In a couple of days should reach me my S-HASH, someone who does work, could explain a bit of a basic setup? Some screenshot? thanks Any comments will be welcome. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 06, 2013, 12:46:09 PM Still no tracking number... Shipped 01/11 (economy)
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 06, 2013, 07:02:01 PM I got my S-HASH and its working fine!
Setup was easy! Get it out of the package, connect powersupply (mine had a connector for adaptor + inside - outside) i soldered a molex (yellow +12V, black -) connector to it to power it from atx PSU. http://img577.imageshack.us/img577/1154/snt7.jpg Connect power. Connect network. Go to your router and see what ip your dhcp server gave you're bord. Enter IP in webbrowser. Change minng pool. Click Set pools. Wait for 5 min and refresh page, it should be hashing. http://imageshack.us/a/img201/2638/tctj.png Left from the 3V3 text is the R01T resistor for OC http://imageshack.us/a/img405/7324/zsi6.jpg http://imageshack.us/a/img812/4861/i9xn.jpg (SPEC for 12V adaptor should be about 4 amp @ 12V @ standard voltage mine measured 0.842V, you need more than 4 amp if you OC) I OC'ed the board by adjusting R01T from 100K to 68K. The voltage i calculate @ this resistance was about 0.90 V. I measured 0.9010V in real life. This gets the board @ 41 GHAS/s. The standard settings measured about 45 - 50W this includes the PSU, OC'ed it measures 67W including PSU. When OC'ing you have to be carefull with the temperature of the DCDC convertor I measured 68°C (MAX 85°C) after OC and 22°C roomtemperature. My advice, get some extra cooling for the DCDC convertor cause it is at his limits when changing the voltage to 0.9V. Tip jar: 1JefT89VUXLc3Fi2V6Jd2DaPuYHGbAU1wa ::) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 06, 2013, 07:45:24 PM I got my S-HASH and its working fine! Setup was easy! Get it out of the package, connect powersupply (mine had a connector for adaptor + inside - outside) i soldered a molex (yellow +12V, black -) connector to it to power it from atx PSU. http://anonymouse.org/cgi-bin/anon-www.cgi/http://img577.imageshack.us/img577/1154/snt7.jpg Connect power. Connect network. Go to your router and see what ip your dhcp server gave you're bord. Enter IP in webbrowser. Change minng pool. Click Set pools. Wait for 5 min and refresh page, it should be hashing. http://imageshack.us/a/img201/2638/tctj.png Left from the 3V3 text is the R01T resistor for OC http://imageshack.us/a/img405/7324/zsi6.jpg http://imageshack.us/a/img812/4861/i9xn.jpg (SPEC for 12V adaptor should be about 4 amp @ 12V @ standard voltage mine measured 0.842V, you need more than 4 amp if you OC) I OC'ed the board by adjusting R01T from 100K to 68K. The voltage i calculate @ this resistance was about 0.90 V. I measured 0.9010V in real life. This gets the board @ 41 GHAS/s. The standard settings measured about 45 - 50W this includes the PSU, OC'ed it measures 67W including PSU. When OC'ing you have to be carefull with the temperature of the DCDC convertor I measured 68°C (MAX 85°C) after OC and 22°C roomtemperature. My advice, get some extra cooling for the DCDC convertor cause it is at his limits when changing the voltage to 0.9V. Tip jar: 1JefT89VUXLc3Fi2V6Jd2DaPuYHGbAU1wa ::) great! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on November 06, 2013, 09:02:02 PM could you describe how you overclocked?? is is the pencil mod?
Thanks :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 06, 2013, 11:01:22 PM could you describe how you overclocked?? is is the pencil mod? Thanks :) You overclock by changing the voltage level. This can be done by changing a resistor: http://img706.imageshack.us/img706/6725/l9y3.jpg The standard is 100k. I measured the voltage: 0,842V You can calculate the output level of the dcdc converter: R=14000/(vout - 0,7) So a 68k 0805 smd resistor should give an output voltage of About 0,9V. I advise you not to do pencil mod, due to the circuit it is hard to measure the correct value. If you measure the resistor on the board it Will not measure 100k due to the circuit. Its too dangerous to burn the dcdc and chips. So i removed the 100k smd resistor and replaced it with 68K and it works greath. Why not higher than 0,9V? Well the dcdc is Max 50A and 85°C. At 0,9V it is at almost his maximum Load. Driving it higher Will possible kill it. Mine is stable at 68°C. Bare in mind that you need 6 amp @ 12v to power it. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: baros008 on November 06, 2013, 11:18:58 PM Today I received NanoFuries from Marto, they were shipped with DPD Road on 31. 10., packaging was really good, heatsinks are black.
4 hash nearly same, 1 is worse https://i.imgur.com/tlYCTjA.png (http://imgur.com/tlYCTjA) settings: 54 bits, active cooling, connected to Anker 7-port USB 3.0 hub with 48W power supply, BFGminer running on old laptop, power consumption at wall is around 40W with switched off screen More pictures http://imgur.com/a/vSFCs That worse device hashes at only about 1.6 GH/s with 52 bits. ??? Can I somehow increase its hashrate? Can you give me instructions for pencil mod? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vs3 on November 07, 2013, 08:08:55 AM Can you give me instructions for pencil mod? See this image: https://i.imgur.com/q1DQFJwl.jpg (http://imgur.com/q1DQFJw) R2 and R3 determine the voltage: V = 0.8*(R2+R3)/R3 (and factory settings are R2=100 and R3=2.4k for about 0.833V) If you want to increase the voltage you can either increase R2 or decrease R3 (pencil mod decreases resistance). And to lower the voltage - you can lower R2 or increase R3. My 2 cents - start by first lowering the voltage. At least that's the safer option ;) By the way - you should really start by plugging just that device - to see if by itself it behaves fine or not. Try also different ports. If it misbehaves even by itself then experiment with pencil mods. It is possible also that the hub just doesn't have enough power for all devices, or that some ports are picky. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 07, 2013, 08:11:21 AM Most probably the problem is not enough power from the USB hub
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: braindead on November 07, 2013, 04:01:36 PM Marco you have pm ... please answer me some questions
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: joeventura on November 07, 2013, 05:11:48 PM When should these members:
hacko.bg joeventura quest darkfriend77 nrg1zer expect chips/refunds from your botched group buy here: https://bitcointalk.org/index.php?topic=217316.msg3487112#msg3487112 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 07, 2013, 09:12:32 PM I just received a shipping notice today for 2 'LAST WEEK OF OCTOBER DELIVERY' S-hash boards. I kindly asked to cancel on 30 October, when I knew I wasn't going to get them in time. He said it was too late and then asked me on 1 November, for a company to ship to otherwise there would be 'customs delays'. I've never heard anything like that and I've had stuff shipped from across the world. I, then asked again last night that he is not shipping his product as advertised and that I would like to cancel my order again. Now today I receive a 'your item has shipped' email but no tracking #. What gives?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: baros008 on November 08, 2013, 10:12:16 AM Most probably the problem is not enough power from the USB hub I tested it alone in the hub and on different PC with USB 3.0 with no change, will do more testing during weekend... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: fydel on November 08, 2013, 06:17:10 PM Nice. I guess I was lucky. All my three nanofuryies run with 2.6 GH/sec (NFY:osc6_bits=54).
But I only get it running under Windows. No success with my raspberrypi. I am having this problem https://bitcointalk.org/index.php?topic=168174.msg3512399#msg3512399 (https://bitcointalk.org/index.php?topic=168174.msg3512399#msg3512399) Any hints on how to set it up with the raspberry? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dnaleor on November 08, 2013, 07:07:54 PM My order is marked as "shipped" for some days now, but no tracking number.
When will the tracking number for MYSCRAPFZ be added on the technobit website? thx in advance :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 09, 2013, 11:18:55 AM Mine is marked as shipped for 8 days now (EGRTGCXFP), and still no tracking number... still no board either
My order is marked as "shipped" for some days now, but no tracking number. When will the tracking number for MYSCRAPFZ be added on the technobit website? thx in advance :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 09, 2013, 05:10:14 PM My 'last week October delivery' for 2 boards, in two orders, are 'in transit', and probably not even past customs yet. That and I paid for express shipping twice, but then have only one identical tracking number for both board orders. ???
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 11, 2013, 10:41:39 AM Marto please can you update the tracking number for order EGRTGCXFP?
And please don't tell me that you are waiting for your "shipping organizer manage to update statuse", it is 10 days now that the order is marked as shipped. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: jammertr on November 11, 2013, 12:13:56 PM Marto I just sent a pm about my order KGMFQXEJA , status update please.
Edit: also sent a message about my order through your website Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 12, 2013, 08:53:26 AM Good morning Marto
The package that corresponds to the order XALIFWTCJ takes several days standing in Germany or not update the status. Date Operation Settlement 2013-11-05 17:53:25 Courier Pick-up SOFIA 2013-11-05 19:21:10 Received in Office SOFIA 2013-11-07 16:10:34 Processed in Office 0180-Neufahrn, GERMANY 2013-11-08 03:27:20 Processed in Office 0016-Aschaffenburg, GERMANY No news on Spain (SEUR) about this. Please could you check this? talk to the carrier? thanks regards Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: shortpocket on November 12, 2013, 10:31:50 AM Paypal includes their fees in their currency prices wich results in expensive euroes so i wrote technobit an email and asked if i could pay in another way but i never heard from them. I wrote them oct 15. That's almost a month ago....
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 12, 2013, 11:15:34 AM Good morning Marto The package that corresponds to the order XALIFWTCJ takes several days standing in Germany or not update the status. Date Operation Settlement 2013-11-05 17:53:25 Courier Pick-up SOFIA 2013-11-05 19:21:10 Received in Office SOFIA 2013-11-07 16:10:34 Processed in Office 0180-Neufahrn, GERMANY 2013-11-08 03:27:20 Processed in Office 0016-Aschaffenburg, GERMANY No news on Spain (SEUR) about this. Please could you check this? talk to the carrier? thanks regards Update: Now on Spain!! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 12, 2013, 02:33:48 PM Paypal includes their fees in their currency prices wich results in expensive euroes so i wrote technobit an email and asked if i could pay in another way but i never heard from them. I wrote them oct 15. That's almost a month ago.... When you checkout you can choose Paypal,Bitpay or Wire transfer. Just try Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: shortpocket on November 12, 2013, 03:09:57 PM I am really sorry that i have to inform you that i have placed an order somewhere else. I had thought of ordering a nanofury i could play with while i waited for the things i have ordered but it does'nt look like it Will arrive before what i have ordered......
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 13, 2013, 09:57:58 PM Help please.
Just got my S-Hash. I put the power I put the network. I agree to the web. I set up the pools. But NOT MINIG! What is wrong? http://i44.tinypic.com/orqe02.jpg Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 13, 2013, 10:36:52 PM Try with BTCguild, one server @ a time in stead of 3 click set pool and wait at least 5 min :p.
How do you power it? also don't think api.bitcoin.... is correct And you should not use the same server addres 2 times ... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 13, 2013, 11:13:20 PM Try with BTCguild, one server @ a time in stead of 3 click set pool and wait at least 5 min :p. Thank you.How do you power it? also don't think api.bitcoin.... is correct And you should not use the same server addres 2 times ... I should hire as a product support ;) Your 4 replacement boards are on DPD Air to you BTW Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 13, 2013, 11:30:04 PM Thx ;D
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 14, 2013, 07:37:05 AM Hello
I tried with BTCGuild and does not work. Marto please could you tell me that I have to test? I'm using a 700W PC power and the LEDs on the S-hash light. I can access over the network to configure the pools. But is held at zero and do not work ... Any idea?? Please urgent, time is money ... thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 14, 2013, 07:57:18 AM You can get debug information from the S-HASH board by connecting USB connector to a PC.
You'll need a PC driver for virtual COM port for FT230x. If you have Win7, the OS will get the driver automatically (just wait a few minutes). Otherwise you can download driver from manufacturer: http://www.ftdichip.com/Drivers/VCP.htm After installing driver, download TeraTerm program: http://logmett.com/index.php?/download/tera-term-479-freeware.html In TeraTerm, open serial connection to USB virtual COM port from S-HASH, and set baudrate to 115200. Reset the board, and you should get debug information in Teraterm screen. Paste the output to forum (if not too long), or PM to me. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: BenTuras on November 14, 2013, 08:00:21 AM Hello What settings did you fill in for btcguild ? eu-stratum.btcguild.com and port 3333 and/or stratum.btcguild.com port 3333 ? See https://www.btcguild.com/index.php?page=supportI tried with BTCGuild and does not work. Marto please could you tell me that I have to test? I'm using a 700W PC power and the LEDs on the S-hash light. I can access over the network to configure the pools. But is held at zero and do not work ... Any idea?? Please urgent, time is money ... thanks Did you fill in the name of one of your btcguild workers ? See https://www.btcguild.com/index.php?page=workers You need to show us what your settings are in order to be helped! Just telling it doesn't work ... doesn't work. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 14, 2013, 09:08:33 AM Hello I tried with BTCGuild and does not work. Marto please could you tell me that I have to test? I'm using a 700W PC power and the LEDs on the S-hash light. I can access over the network to configure the pools. But is held at zero and do not work ... Any idea?? Please urgent, time is money ... thanks Hi, small howto: make account on BTCguild ...
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 14, 2013, 09:20:09 AM Hi, small howto: make account on BTCguild ...
Done oscurito23
Done oscurito23_1
Done eu-stratum.btcguild.com
oscurito23_1
Any password works?? Now im not on house to change and try but i use 1111 as password. [/list]
Done
Done LAN access
Done
I suspected the port 3333, but I've used a Raspy minepeon with Slush with the same router and have had no problems .... [/list] Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 14, 2013, 02:00:53 PM http://i40.tinypic.com/5f4uf5.jpg
This led is OFF on may shash ??? ??? ??? ??? ??? ??? ??? I tried the settings with BTCGUILD WITHOUT PASSWORD It does not work ... http://i44.tinypic.com/1zqapmu.jpg Any ideasż? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 14, 2013, 02:07:01 PM MESSAGE FOR Marto74
PLEASE offer me A SOLUTION FOR PRIVATE MESSAGE I HAVE 2 DAYS TO ORDER THE REFUND BY PAYPAL. IF DONT HAVE NEWS applying for REFUND. THIS DOES NOT WORK. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: BenTuras on November 14, 2013, 02:21:51 PM I tried the settings with BTCGUILD Fill in abc123 in the password field and try again. The password needs to have a value, it just doesn't matter what value.WITHOUT PASSWORD Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 14, 2013, 03:43:18 PM That LED indicates data on the USB interface, and is only valid when the USB cable is plugged in. It's not important for hashing. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 14, 2013, 04:10:35 PM MESSAGE FOR Marto74 Hi,PLEASE offer me A SOLUTION FOR PRIVATE MESSAGE I HAVE 2 DAYS TO ORDER THE REFUND BY PAYPAL. IF DONT HAVE NEWS applying for REFUND. THIS DOES NOT WORK. Do you have Teamviewer. Please attach the board to a pc with Teamviewer , over the usb. Also connect the board to power and lan send me PM with TeamViewer logon and pass 10x Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dnaleor on November 14, 2013, 04:28:38 PM MESSAGE FOR Marto74 PLEASE offer me A SOLUTION FOR PRIVATE MESSAGE I HAVE 2 DAYS TO ORDER THE REFUND BY PAYPAL. IF DONT HAVE NEWS applying for REFUND. THIS DOES NOT WORK. you dont need to scream... There are plenty of people willing to help you, right here on the forums. You probably just did something wrong while installing. Most of the delivered boards are reported working. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 14, 2013, 05:13:22 PM http://i40.tinypic.com/5f4uf5.jpg This led is OFF on may shash ??? ??? ??? ??? ??? ??? ??? I tried the settings with BTCGUILD WITHOUT PASSWORD It does not work ... http://i44.tinypic.com/1zqapmu.jpg Any ideasż? You tried one pool? on the you have filled in all 4 lines and again you used 3 times the same server ... you should NOT use eu-stratum.btcguild.com 3 times only once. There is No benifit in using the same server multiple times with different user. Just start off with one pool, eu-stratum.btcguild.com, one user and NO PASS. Make sure all the field are empty (no spaces tab ....). Ports are set to 0 in the pools i don't use. if it doesn't work try reset and start over. Example: http://img20.imageshack.us/img20/9475/1pls.png Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 14, 2013, 05:29:28 PM There's no harm in filling in the same pool more than once.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: oscurito23 on November 14, 2013, 08:26:01 PM You can get debug information from the S-HASH board by connecting USB connector to a PC. You'll need a PC driver for virtual COM port for FT230x. If you have Win7, the OS will get the driver automatically (just wait a few minutes). Otherwise you can download driver from manufacturer: http://www.ftdichip.com/Drivers/VCP.htm After installing driver, download TeraTerm program: http://logmett.com/index.php?/download/tera-term-479-freeware.html In TeraTerm, open serial connection to USB virtual COM port from S-HASH, and set baudrate to 115200. Reset the board, and you should get debug information in Teraterm screen. Paste the output to forum (if not too long), or PM to me. Thanks to this test, I just had to connect the usb and started to work. It's as if frozen, but revived when I connected usb and tera term. Thanks to all for the help. Special thanks to Cscape PD: There were no errors or in the pools or users or passwords. All that was good ... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on November 14, 2013, 08:57:23 PM I make my first technobit buy, usb nanofury, I hope that arrive in time :D
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dnaleor on November 15, 2013, 12:45:12 AM is there any setup guide for the nanofury? Is special software necessary (like with the HEX16A) ?
Is it possible to let ik mine with a raspi? :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Digi128pci on November 15, 2013, 08:12:43 AM I tried with BFGminer en APIHID it's recognised but, it said it worked for a second but then failed on SPI ...
So i guess its not working on raspi ATM. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vs3 on November 15, 2013, 08:38:32 AM is there any setup guide for the nanofury? Is special software necessary (like with the HEX16A) ? Is it possible to let ik mine with a raspi? :) Ah that dreaded Search function :) Copy-paste from just two pages ago: I'm guessing Marto74 may provide some additional instructions so in the mean time that could be a good start: Sample usage instructions: Get the latest BFGMINER - e.g. from this link: http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=bfgminer I did my tests with this version: http://luke.dashjr.org/tmp/code/webisect/wr/6e770d6c7c3ffbca03c4a1eaf25cfafc77542fc4-win32.zip http://luke.dashjr.org/tmp/code/webisect/wr/6e770d6c7c3ffbca03c4a1eaf25cfafc77542fc4-win64.zip sample command line: bfgminer.exe -o stratum+tcp://mint.bitminter.com:3333 -u vs3_nanofury1 -p nanofury1 -G -S all --set-device NFY:osc6_bits=52 The last parameter overwrites the speed bits. A note of caution - the "safe" speed is around 50 bits, so anything over that will likely use more power than what the USB2.0 specs permit. No two chips are the same, so the upper limit will probably be different for each device. On my devices it was around 52-54. Two things have been happening with my devices when I go over the limit - 1) when they overheat hashrate drops significantly - like 0.3-0.5GH, and 2) if the hub can't provide enough power (and voltage drops below 3.6-3.8V) that just ruins the USB communication and the device appears to have disconnect - beware that the bitfury chip will still have enough power (it needs 1V) and will continue to work even though the PC doesn't "see" the device, so you'll need to unplug it and plug it back in. Please be careful when handling them - THEY WILL BE HOT!!! and especially even more if you push them. DO NOT TOUCH THE HEATSINKS when they work - heatsinks may reach over 80C! As for RasPI - I've seen several people mention that they have had troubles making it run on RasPi. I personally don't yet know if it works there or not - I purchased one the other day and will test as soon as I get it in my hands (possibly early next week). Symptoms so far suggest that initial communication happens fine, but then once the chip starts mining (and using all that power) something happens and communication goes away - so it might be something as simple as not enough power (for either the device or it could be also for the raspi - especially if it gets powered via the hub) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on November 15, 2013, 09:04:08 AM I tried to run 2 NFy on RPi, but my problem was that the RPi doesn´t work with my Anker 3.0 Hub....
I didn´t try it with a 2.0 Hub - i will test it this evening Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dnaleor on November 15, 2013, 09:10:06 AM already many thanks for the info ;)
I tried to run 2 NFy on RPi, but my problem was that the RPi doesn´t work with my Anker 3.0 Hub.... i will try the same this evening! :)I didn´t try it with a 2.0 Hub - i will test it this evening Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 15, 2013, 10:29:15 AM I'm waiting my board for 3 weeks now (last week of october delivery, and still no board, no tracking number and even not a correct invoice).
I make my first technobit buy, usb nanofury, I hope that arrive in time :D Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on November 15, 2013, 11:17:48 AM Has anyone tested if the nanofurys work on the bitminter java client?
Would be interesting... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 15, 2013, 12:29:42 PM Marto why you keep ignoring my emails ? Complete DXMSSBDSH and JITPPXZMN its overdue i order 13 TH OCTOBER !!!
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 15, 2013, 07:03:10 PM Marto why you keep ignoring my emails ? Complete DXMSSBDSH and JITPPXZMN its overdue i order 13 TH OCTOBER !!! Hi, Sorry just been busy lately. You got e-mail Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 16, 2013, 04:12:47 AM After having to order power supplies AFTER receiving my already late boards because it did not say they were required, much less a 12V/5A kind, these boards are not hashing higher than 37-38Gh/s, with the occasion spike up to 40Gh/s, but over an hour barely tops 38Gh/s. No where did it indicate, until I pointed it out, that it needed a separate barrel-jack power source in order to function properly. On top of that, they were two weeks late for shipment. So much for 'last week of October delivery'. The boards themselves are built better than cryptx/burnins Bitfury boards, but don't perform nearly as well, even though they run cooler.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 16, 2013, 06:27:16 AM After having to order power supplies AFTER receiving my already late boards because it did not say they were required, much less a 12V/5A kind, these boards are not hashing higher than 37-38Gh/s, with the occasion spike up to 40Gh/s, but over an hour barely tops 38Gh/s. No where did it indicate, until I pointed it out, that it needed a separate barrel-jack power source in order to function properly. On top of that, they were two weeks late for shipment. So much for 'last week of October delivery'. The boards themselves are built better than cryptx/burnins Bitfury boards, but don't perform nearly as well, even though they run cooler. Thank you for the inputThe product page already updated Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vgo on November 16, 2013, 07:51:28 AM After having to order power supplies AFTER receiving my already late boards because it did not say they were required, much less a 12V/5A kind, these boards are not hashing higher than 37-38Gh/s, with the occasion spike up to 40Gh/s, but over an hour barely tops 38Gh/s. No where did it indicate, until I pointed it out, that it needed a separate barrel-jack power source in order to function properly. On top of that, they were two weeks late for shipment. So much for 'last week of October delivery'. The boards themselves are built better than cryptx/burnins Bitfury boards, but don't perform nearly as well, even though they run cooler. Thank you for the inputThe product page already updated Same here, runs very cool but the avg. rate is 36.5 Ghash/s with some chips at 3.0 Gh/s and others at 1.0 Gh/s ???. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 16, 2013, 08:00:11 AM Yes there are no bit fury chips that are equal in terms of Gh/s.
On the GH/s rate , we did assemble the boards with safer option on Power reg module. Some boards do 39- 40 some 36-37, depends on the Bitfury chips. The same story is with Nano fury . Some make 2.3-2.5 , some make 2 GH/s Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 16, 2013, 08:04:59 AM If the boards run cool, it's probably a good idea to increase regulator voltage a bit. This can be done by using a lower value resistor for R01T (next to power regulator module).
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 16, 2013, 08:18:07 AM We'll do it probably on next batch
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vgo on November 16, 2013, 08:47:44 AM If the boards run cool, it's probably a good idea to increase regulator voltage a bit. This can be done by using a lower value resistor for R01T (next to power regulator module). Better 36.5 Ghash/s that 0 Ghash/s. Too much risk for me. ;D Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 18, 2013, 05:22:27 PM Marto can you please answer my PM?
I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 18, 2013, 05:34:00 PM Marto can you please answer my PM? In our data I have it shipped.I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. I'll check tomorrow with carrier. If it's lost all sendings are insured. Let me check and if it's lost I can refund you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: hammer on November 18, 2013, 07:37:25 PM Hello Marto,
i have the same Problem like more and more users. My both Nanofurys are not see from my Raspberry (Minepeon with bfgminer oder cgminer) Have your Company tested withe raspberry or experience? I will only runs the raspberry not the PC! ;) Please answer me and think on the other users with the same Problem! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 18, 2013, 09:57:55 PM Hello Marto, @ the moment we are adopting it to our CGminer patch for both Linux and dd-wrt.i have the same Problem like more and more users. My both Nanofurys are not see from my Raspberry (Minepeon with bfgminer oder cgminer) Have your Company tested withe raspberry or experience? I will only runs the raspberry not the PC! ;) Please answer me and think on the other users with the same Problem! Raspbery is next step I think with cgminer patch it will be solved Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: hammer on November 19, 2013, 08:24:44 PM Hello Marto,
i don`t know how i install the patch update from your website into the cgminer??? Thank you for answer it in simply steps (for a idiot) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: joeventura on November 19, 2013, 09:08:47 PM Marto can you please answer my PM? I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. he has screwed me too! Said he mailed me chips a month ago after pocketing 1.43BTC Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 19, 2013, 10:06:06 PM @ joeventura
Your chips were shiped with regular mail as far you did not pay handling fee. If the sending is lost I'm ready to ship again with priority mail ( with tracking) , but you have to pay 10 EUR handling fee. Also I did not pocket your BTC, the funds were spent on chips.... Please stop this Best Regards: Martin Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 19, 2013, 10:59:40 PM Hello martin,
So have you checked my order with the carrier ? Is my board lost ? Marto can you please answer my PM? In our data I have it shipped.I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. I'll check tomorrow with carrier. If it's lost all sendings are insured. Let me check and if it's lost I can refund you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 20, 2013, 12:44:50 PM Martin still no news from the carrier?
Marto can you please answer my PM? In our data I have it shipped.I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. I'll check tomorrow with carrier. If it's lost all sendings are insured. Let me check and if it's lost I can refund you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 20, 2013, 05:15:08 PM Martin,
I'm still waiting for info about my board.... I kow you are busy, but there is a limit to my patience... Marto can you please answer my PM? In our data I have it shipped.I'm still waiting for my S-Hash board ("last week of october delivery", order EGRTGCXFP placed on 3rd october, shipped on 1st of november). I do not have the board, i do not have a tracking number, and i even do not have a correct (legal) invoice. 3 weeks and 2 difficulty changes ... I estimate the money i have already loose to almost 1BTC. I'm really disappointed now. Please answer (at least give me a shipping number!!!). Next step is to warn Paypal and European Authorities. I'll check tomorrow with carrier. If it's lost all sendings are insured. Let me check and if it's lost I can refund you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 20, 2013, 10:27:30 PM I'd try emailing him, unless this is your last resort.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 21, 2013, 01:03:21 PM I've tried PM, mail, website message, ....
It is the last of my last resort. Martin i'm gonna contact ebay and EU authorities if you do not answer me today. I'd try emailing him, unless this is your last resort. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 22, 2013, 09:30:04 AM Marto i know you are busy but you have to complete the order its another week !
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: btc_uzr on November 22, 2013, 05:05:07 PM I was thinking about to order one of those USB stick, just for fun not for profit - and maybe a second one as a present.
After reading through this thread I'm not sure whether I should do so. Will keep an eye on how things develop.. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 22, 2013, 05:38:58 PM We did send a newsletter but here it is again
Quote Dear, Customers, After a week of delays in sourcing and production deliveries, today all needed components got here and our production will get back on track in Monday. All November delivery orders will be shipped in next 5 to 10 days. There will be no delay in orders with December shipment. Please all customers ordered assembly service , send us your chips. These are nanos for 29.30 EUR , HEX16c(a2) avalon 2 for 119.30 EUR and S-hash for 399 EUR Best Regards Customer support Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 22, 2013, 05:41:44 PM Marto i am talking about my order of OCTOBER !!!! and you offering orders for december???
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 22, 2013, 06:42:06 PM Marto i am talking about my order of OCTOBER !!!! and you offering orders for december??? NoI'm talking that until then We'll be on track Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: jammertr on November 22, 2013, 10:30:53 PM same problem here
my order is ... KGMFQXEJA -- placed on 2013-09-20 listed as 2013-10-27 09:15:09 Preparation in progress 2013-10-11 11:07:42 IN Production sent two messages about my order the only reply I got is Martin Sirakov 2013-11-11 15:21:37 HI, Your board is in last batch of HEX16a boards They are @ the moment assembled with heat sinks and fans Today is, well it is 23rd here. I know this thread is about Bitfury but I have the same problem about delivery times Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 24, 2013, 10:36:18 AM This is simply a joke.
My "last week of october delivery" order has been marked as shipped since nov 1. And now you are telling me that my order will be delivered wihtin the next two weeks ?? Are you mocking at me ? I have already loose more than 1BTC, and i still have no board. Please simply tell me when i will have my board. We did send a newsletter but here it is again Quote Dear, Customers, After a week of delays in sourcing and production deliveries, today all needed components got here and our production will get back on track in Monday. All November delivery orders will be shipped in next 5 to 10 days. There will be no delay in orders with December shipment. Please all customers ordered assembly service , send us your chips. These are nanos for 29.30 EUR , HEX16c(a2) avalon 2 for 119.30 EUR and S-hash for 399 EUR Best Regards Customer support Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on November 24, 2013, 03:53:00 PM MARTO74 I want a response for technobit by email....
be quickly if you want to sell a few more units to me :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Turbor on November 24, 2013, 04:11:46 PM People should chill out a bit. :D I had to wait more than 6 fucking months for my BFL gear to arrive. In this business delays are to be expected.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: intron on November 24, 2013, 04:57:24 PM People should chill out a bit. :D I had to wait more than 6 fucking months for my BFL gear to arrive. In this business delays are to be expected. You are a 'lucky' man. I had to wait eight months and then they also sent me the wrong power supply. Took me a diff hike to figure that out and get the thing hashing :-\ Better make your own miner...;) intron Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: joeventura on November 24, 2013, 07:12:38 PM Caution:
Re:Marto His Trust rating is looking more accurate and all the people you screwed over (list here) https://bitcointalk.org/index.php?topic=217316.msg3164220#msg3164220 are not happy. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Turbor on November 24, 2013, 07:36:48 PM This user is currently ignored. Sorry joe
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 25, 2013, 08:57:39 PM Caution: :)Re:Marto His Trust rating is looking more accurate and all the people you screwed over (list here) https://bitcointalk.org/index.php?topic=217316.msg3164220#msg3164220 are not happy. No this is the list of people wanting refund before voting was open. All of them except you got refund of the initial cost , because did send me signed msg. You did not. Your 16 chips are sent with regular mail as far you did not paid handling tax. Please stop this constant offtopic Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 26, 2013, 09:39:16 AM I'm Ok to wait, and i can understand that technobit have a lot of customers, difficulties and not enough time...
But my order has been marked as shipped, and one month later marto said "will be shipped within 2 weeks"!!! This is what i cannot understand, and this is what i'm getting upset about. Moreover, some that have order after me have already received their board... People should chill out a bit. :D I had to wait more than 6 fucking months for my BFL gear to arrive. In this business delays are to be expected. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 28, 2013, 05:34:20 PM Still no news...
Marto please where is my board? (order EGRTGCXFP placed on 2013-10-03, marked as shipped since 2013-11-01). Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wallydz on November 28, 2013, 07:36:02 PM Marto again another week passed and another difficulty and still no news from you !
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on November 28, 2013, 09:12:09 PM S-hash
Today finaly all delayed orders got here from PnP. Tommorrow all of them will be shipped (installed) Nanofuries We shipped today more than 300 pcs Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 29, 2013, 09:08:28 AM So if i understand your words you say that you will send tomorrow my board that is marked as shipped since 2013-11-01 ?
If my board is shipped 2 times, maybe i will receive it 2 times.... S-hash Today finaly all delayed orders got here from PnP. Tommorrow all of them will be shipped (installed) Nanofuries We shipped today more than 300 pcs Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on November 29, 2013, 09:19:21 AM I had the same thing,
my boards were marked as shipped before they were even built. Marto, your product is really very good indeed its just a shame the customer service aspect lets it down. I understand you guys are under a pressure to get these out, but please try and resolve your communication issues. my s hash boards have been going without issue since i received them. non stop. such a great product.:) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on November 29, 2013, 10:10:17 AM That's why i'm so upset!!
With a good communication i would certainly have bought more that just one board... Btw luckily you have your board, i'm still waiting for it :( May i ask you when you ordered it, when it has been marked as shipped, and when did you receive it ? I had the same thing, my boards were marked as shipped before they were even built. Marto, your product is really very good indeed its just a shame the customer service aspect lets it down. I understand you guys are under a pressure to get these out, but please try and resolve your communication issues. my s hash boards have been going without issue since i received them. non stop. such a great product.:) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: jammertr on November 29, 2013, 11:46:50 AM That's why i'm so upset!! With a good communication i would certainly have bought more that just one board... Btw luckily you have your board, i'm still waiting for it :( May i ask you when you ordered it, when it has been marked as shipped, and when did you receive it ? I had the same thing, my boards were marked as shipped before they were even built. Marto, your product is really very good indeed its just a shame the customer service aspect lets it down. I understand you guys are under a pressure to get these out, but please try and resolve your communication issues. my s hash boards have been going without issue since i received them. non stop. such a great product.:) Communication is almost non-existent my order is ... KGMFQXEJA -- placed on 2013-09-20 listed as 2013-10-27 09:15:09 Preparation in progress 2013-10-11 11:07:42 IN Production on 11.11.13 I got a message ... "@ the moment assembled with heat sinks and fans" thats it Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on November 29, 2013, 05:44:12 PM it was approximately a month between technobit saying it was dispatched and it actually being dispatched. It was in testing for about a week.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 29, 2013, 09:05:28 PM Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly and there is no real interface to control them besides the web one that just has firmware flash and pool info. Also, is anyone actually getting 40Gh/s on these??
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on November 29, 2013, 09:11:57 PM Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly and there is no real interface to control them besides the web one that just has firmware flash and pool info. Also, is anyone actually getting 40Gh/s on these?? sure getting the 40GH, why use more then 1 pool? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 29, 2013, 09:25:06 PM Does anyone know how to change the pool management strategy on these? They seem to switch pools somewhat randomly What firmware version are you using ? Some versions didn't have very good pool management. Latest version (0.1.10) works a lot better. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: LordTheron on November 29, 2013, 11:55:13 PM Quote sure getting the 40GH, why use more then 1 pool? How about pool failover? Kinda useful :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: LordTheron on November 30, 2013, 12:05:00 AM Also, is anyone actually getting 40Gh/s on these?? I get 39.8GH average on one of my boards (1 chips is almost half the speed) and over 41GH on the other 2. No overclocking done yet. 15 2.7 2.6 2.5 2.6 2.8 2.1 2.5 2.7 2.8 3.1 2.1 2.7 2.6 2.6 2.7 2.7 41.7 I will overclock them tomorrow if I get spare minute and post results I get with what value resistors. :) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on November 30, 2013, 03:05:41 AM I'm running 0.1.6, where can I find the more updated firmware? The one I got is from technobit.eu
This is annoying, heres the tables from my two S-Hash cards: min chip 0 chip 1 chip 2 chip 3 chip 4 chip 5 chip 6 chip 7 chip 8 chip 9 chip 10 chip 11 chip 12 chip 13 chip 14 chip 15 Total (GH/s) 1 2.1 2.3 2.4 1.7 2.3 2.1 2.5 2.1 2.1 2.1 1.6 1.7 2.6 1.6 2.4 2.5 34.4 5 2.1 2.4 2.5 2.2 2.1 2.5 2.3 2.1 2.3 2.7 2.0 2.1 2.4 2.0 2.3 2.5 36.4 15 2.2 2.3 2.4 2.5 2.1 2.4 2.4 2.1 2.4 2.6 2.3 2.2 2.5 2.0 2.3 2.4 37.0 min chip 0 chip 1 chip 2 chip 3 chip 4 chip 5 chip 6 chip 7 chip 8 chip 9 chip 10 chip 11 chip 12 chip 13 chip 14 chip 15 Total (GH/s) 1 2.5 2.6 2.4 2.6 2.4 2.1 2.1 2.4 2.5 1.4 2.8 1.9 2.1 2.3 2.1 2.4 36.7 5 2.3 2.3 2.4 2.5 2.5 2.3 2.7 2.1 2.4 1.1 2.7 2.3 2.3 2.4 2.3 2.4 37.1 15 2.4 2.4 2.2 2.3 2.4 2.4 2.5 2.3 2.2 1.2 2.5 2.3 2.4 2.3 2.3 2.4 36.5 by the sound of it, it seems these are NOT even close to hitting the as advertised "40Gh/s" Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on November 30, 2013, 12:13:00 PM I'm running 0.1.6, where can I find the more updated firmware? The one I got is from technobit.eu This is annoying, heres the tables from my two S-Hash cards: min chip 0 chip 1 chip 2 chip 3 chip 4 chip 5 chip 6 chip 7 chip 8 chip 9 chip 10 chip 11 chip 12 chip 13 chip 14 chip 15 Total (GH/s) 1 2.1 2.3 2.4 1.7 2.3 2.1 2.5 2.1 2.1 2.1 1.6 1.7 2.6 1.6 2.4 2.5 34.4 5 2.1 2.4 2.5 2.2 2.1 2.5 2.3 2.1 2.3 2.7 2.0 2.1 2.4 2.0 2.3 2.5 36.4 15 2.2 2.3 2.4 2.5 2.1 2.4 2.4 2.1 2.4 2.6 2.3 2.2 2.5 2.0 2.3 2.4 37.0 min chip 0 chip 1 chip 2 chip 3 chip 4 chip 5 chip 6 chip 7 chip 8 chip 9 chip 10 chip 11 chip 12 chip 13 chip 14 chip 15 Total (GH/s) 1 2.5 2.6 2.4 2.6 2.4 2.1 2.1 2.4 2.5 1.4 2.8 1.9 2.1 2.3 2.1 2.4 36.7 5 2.3 2.3 2.4 2.5 2.5 2.3 2.7 2.1 2.4 1.1 2.7 2.3 2.3 2.4 2.3 2.4 37.1 15 2.4 2.4 2.2 2.3 2.4 2.4 2.5 2.3 2.2 1.2 2.5 2.3 2.4 2.3 2.3 2.4 36.5 by the sound of it, it seems these are NOT even close to hitting the as advertised "40Gh/s" mine are the same getting about 37.5 gh each. how on earth are you getting 40+??? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on November 30, 2013, 12:21:56 PM I run 1.0.3 and seem to have higher hash rates:
Welcome to the S-HASH, running firmware version 0.1.3 Hashing speeds min chip 0 chip 1 chip 2 chip 3 chip 4 chip 5 chip 6 chip 7 chip 8 chip 9 chip 10 chip 11 chip 12 chip 13 chip 14 chip 15 Total (GH/s) 1 2.0 2.4 2.1 3.1 2.9 3.1 1.4 2.8 2.9 2.9 2.9 2.1 2.7 2.7 3.4 1.6 41.2 5 2.3 2.4 2.6 2.3 2.7 2.5 1.2 3.0 2.2 2.5 2.5 2.2 2.8 2.8 2.8 2.5 39.5 15 2.6 2.6 2.6 2.5 2.8 2.5 1.2 2.9 2.2 2.6 2.6 2.6 2.6 2.7 2.7 2.5 40.3 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on November 30, 2013, 12:24:40 PM I run 1.0.3 and seem to have higher hash rates: That's because you got the board from me, not Technobit, so it has different chips and different voltage. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on November 30, 2013, 12:33:40 PM I run 1.0.3 and seem to have higher hash rates: That's because you got the board from me, not Technobit, so it has different chips and different voltage. yes, I appreciate your high quality work! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on November 30, 2013, 12:45:28 PM So cscape would your firmware 1.10 work on the technobit boards and if so where could I download it from?
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: basd82 on December 02, 2013, 08:00:59 PM Hi all, today the first batch of NanoFury camo out of trough hole assembly here are some photos of the very first board of the production run. http://s24.postimg.org/poo9r9y81/nano1.jpg (http://postimg.org/image/poo9r9y81/) http://s24.postimg.org/hx7jspu2p/nano2.jpg (http://postimg.org/image/hx7jspu2p/) http://s24.postimg.org/le9lvot4x/nano3.jpg (http://postimg.org/image/le9lvot4x/) We are working on heat sink now. To be ready until tomorrow morning then start shipping I hope you learn to make beter estimate about the time before shipping. First you say this week (the week of 15 oktober) Then you say last week.... Now you say this week... i hope so Also get someone that answers mail. You say on the site Quote CONTACT OUR EXPERT SUPPORT TEAM! 24/7 support hotline mail office@nospam.com Thank you for the input I still do not have the miners, technobit does not repond or verry late. I still do not have my two USB miners My packes was reported shiped and was not tracebol trow site of technot bit. on 18 1 get quick respons with tracking url. It says parcel deliverd, i reported it was not, i got respons that he will send a letter to transporter. I mailed technobit on 26-11 no respons I mailed them today again. But i think i won't get a respons het al, and my order is LOST, no money back, no miners. No way to get money back or miners. Because i reported a dispute earlyer because techno bit dit not respond, and i closed them because they finaly told me ship time that was of bye 2 weeks bye the way. But i can't reopend or open new dispute with paypal i will contact i gues because of this Technobit apparently claimed that 24/7 email support have that is not true. It is very bad reaction time to mail or NOT at all. http://s30.postimg.org/jiq5yn2ip/Knipsel4.png (http://postimage.org/) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on December 02, 2013, 10:23:58 PM Where is my shipment? Tracking not work....
6 nano to portugal Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: basd82 on December 02, 2013, 10:31:59 PM Where is my shipment? Tracking not work.... 6 nano to portugal You two ? I gues no respons form technobit either? THey just respond Quote from: technobit Your sending is delivered and signed, just ask DPD @ your country. If needed I'll ask them for signed copy. There is no way Paypal to judge I wonder just becouse i posted here? In short they think " your problem", no technobit its your. A little custtomer service would be nice. Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender! Provide the info requeste a week ago or send my 2 miners or do a refund. Paypal also require a signigture as proof Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on December 02, 2013, 10:34:31 PM I run 1.0.3 and seem to have higher hash rates: That's because you got the board from me, not Technobit, so it has different chips and different voltage. Will your firmware work on these boards? Has anyone managed to get any interface besides the web interface that leaves lots to be desired? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on December 03, 2013, 02:00:19 PM Where is my shipment? Tracking not work.... 6 nano to portugal You two ? I gues no respons form technobit either? THey just respond Quote from: technobit Your sending is delivered and signed, just ask DPD @ your country. If needed I'll ask them for signed copy. There is no way Paypal to judge I wonder just becouse i posted here? In short they think " your problem", no technobit its your. A little custtomer service would be nice. Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender! Provide the info requeste a week ago or send my 2 miners or do a refund. Paypal also require a signigture as proof Technobit dont responde to my emails! Im pissed of now!!!!! EDIT: The items arrive just now ;) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on December 03, 2013, 02:41:19 PM Where is my shipment? Tracking not work.... 6 nano to portugal You two ? I gues no respons form technobit either? THey just respond Quote from: technobit Your sending is delivered and signed, just ask DPD @ your country. If needed I'll ask them for signed copy. There is no way Paypal to judge I wonder just becouse i posted here? In short they think " your problem", no technobit its your. A little custtomer service would be nice. Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender! Provide the info requeste a week ago or send my 2 miners or do a refund. Paypal also require a signigture as proof Technobit dont responde to my emails! Im pissed of now!!!!! EDIT: The items arrive just now ;) Let us know how it hashes. Does anyone know if cscapes firmware will work on these, or where it can be found? This ~36Gh/s per unit while it runs super cool leaves a lot of room for improvement. The Bitburner Furys I have, although poorer in quality, still manage to pull ~50Gh/s per board. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: easynote on December 03, 2013, 04:28:59 PM http://farm3.staticflickr.com/2891/11191564965_059d987f24_o.jpg (http://www.flickr.com/photos/97436451@N08/11191564965/)
nano's hash power x6 (http://www.flickr.com/photos/97436451@N08/11191564965/) por easynote | estradasportuguesas.net (http://www.flickr.com/people/97436451@N08/), no Flickr 6 nanofury's with bfgminer 3.8 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on December 03, 2013, 05:03:30 PM Where is my shipment? Tracking not work.... 6 nano to portugal You two ? I gues no respons form technobit either? THey just respond Quote from: technobit Your sending is delivered and signed, just ask DPD @ your country. If needed I'll ask them for signed copy. There is no way Paypal to judge I wonder just becouse i posted here? In short they think " your problem", no technobit its your. A little custtomer service would be nice. Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender! Provide the info requeste a week ago or send my 2 miners or do a refund. Paypal also require a signigture as proof Technobit dont responde to my emails! Im pissed of now!!!!! EDIT: The items arrive just now ;) Let us know how it hashes. Does anyone know if cscapes firmware will work on these, or where it can be found? This ~36Gh/s per unit while it runs super cool leaves a lot of room for improvement. The Bitburner Furys I have, although poorer in quality, still manage to pull ~50Gh/s per board. I can confirm that Cscape`s firmware does run on the s hash technobit boards. However please don`t expect a hash rate improve. As far as I know, "software" overclocking on these boards is not possible. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on December 03, 2013, 07:21:22 PM Where is my shipment? Tracking not work.... 6 nano to portugal You two ? I gues no respons form technobit either? THey just respond Quote from: technobit Your sending is delivered and signed, just ask DPD @ your country. If needed I'll ask them for signed copy. There is no way Paypal to judge I wonder just becouse i posted here? In short they think " your problem", no technobit its your. A little custtomer service would be nice. Sorrie, but the burden of proof lies with you, not with my. And DPD does not provided my with the info or signigture because I'm not. Sender! Provide the info requeste a week ago or send my 2 miners or do a refund. Paypal also require a signigture as proof Technobit dont responde to my emails! Im pissed of now!!!!! EDIT: The items arrive just now ;) Let us know how it hashes. Does anyone know if cscapes firmware will work on these, or where it can be found? This ~36Gh/s per unit while it runs super cool leaves a lot of room for improvement. The Bitburner Furys I have, although poorer in quality, still manage to pull ~50Gh/s per board. I can confirm that Cscape`s firmware does run on the s hash technobit boards. However please don`t expect a hash rate improve. As far as I know, "software" overclocking on these boards is not possible. but pencil mod is possible as posted somewhere else ;) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on December 04, 2013, 11:47:36 AM if you are brave enough yes!
Although I haven't really seen a step by step of what to do/how to do it. If I had one I might try it. Foofighter, could you provide a link? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on December 11, 2013, 11:28:25 AM Will there be a new batch of Nanofurys? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on December 11, 2013, 11:41:22 AM if you are brave enough yes! Although I haven't really seen a step by step of what to do/how to do it. If I had one I might try it. Foofighter, could you provide a link? I think there was some kind of step by step guide somewhere on the forums, cant recal where I have seen it. But cscape knows it for sure Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 20, 2013, 02:06:36 PM Hi marto, it seems S-hash doesn't work well with my prefered pool: p2pool.
I can see the connection from it, and data exchanges, but no miner graph appears, and no hashrate increase. P2pool node also use Stratum, with varied port number (typical is 9332, but I use another), username is either address or name, possibly with +miner_difficulty and/or /share_difficulty after the address/name. Any idea why? Edit: firmware version is 0.1.7 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 20, 2013, 02:16:12 PM I also notice some kind of bugs:
For Eligius: when the password is x, it will also append a x to username. setting password to empty fix it For BitMinter: shares are submitted to default worker, even password is empty, maybe also wrong worker name Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: warhawk187 on December 20, 2013, 09:04:48 PM if you are brave enough yes! Although I haven't really seen a step by step of what to do/how to do it. If I had one I might try it. Foofighter, could you provide a link? Yes, if this can be posted I will surely donate some BTC towards it, if it gives us >10% improvement. Also, what power brick are you guys using? I'm using the generic 12V/5A brick that not surprisingly powered my old BFL Jalapenos. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 21, 2013, 01:26:36 AM Hi marto, it seems S-hash doesn't work well with my prefered pool: p2pool. I can see the connection from it, and data exchanges, but no miner graph appears, and no hashrate increase. P2pool node also use Stratum, with varied port number (typical is 9332, but I use another), username is either address or name, possibly with +miner_difficulty and/or /share_difficulty after the address/name. Any idea why? Edit: firmware version is 0.1.7 Debug information from S-Hash console: Trying pool 2, server 10.0.0.250:19332 as user shash: Miner 10.0.0.251 connecting to server 10.0.0.254:19332 unknown tag "jsonrpc" unknown tag "jsonrpc" unknown tag "jsonrpc" set difficulty 1 Response from pool too long. Wait or pick a different pool. unknown tag "jsonrpc" set difficulty 1 Response from pool too long. Wait or pick a different pool. unknown tag "jsonrpc" .... It seems the software could not handle p2pool stratum well :( Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 21, 2013, 01:34:06 AM I also notice some kind of bugs: For Eligius: when the password is x, it will also append a x to username. setting password to empty fix it For BitMinter: shares are submitted to default worker, even password is empty, maybe also wrong worker name BitMinter: The default worker issue seems just a problem of BitMinter doesn't count shares for new created worker immediately, it is normal after some time. But it is often stuck at: Code: init pool 0 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 21, 2013, 08:27:00 PM Edit: firmware version is 0.1.7 From where did you got v0.1.7? The latest firmware i can find in download section is v0.1.6. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on December 21, 2013, 08:36:16 PM i`m currently running 0.1.10, which came straight from Cscape. To be honest i don`t notice much difference. Maybe, with Cscapes prmission we can post here.
As far as I know, Technobit have been sent the latest firmware. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 21, 2013, 08:44:02 PM I don't mind if 0.1.10 gets posted, but I had some problems with 0.1.8 and 0.1.9 sometimes bricking the board. I think the bug has been found and fixed in 0.1.10, but I'm still concerned about this happening again. As far as hashing performance, there's absolutely no change between 0.1.10 and older. The only noticable improvement for end users is the better backup pool logic, and slightly larger memory for stratum decoding.
If your board is running stable on an old version, I would not recommend upgrading. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 22, 2013, 01:43:56 AM I don't mind if 0.1.10 gets posted, but I had some problems with 0.1.8 and 0.1.9 sometimes bricking the board. I think the bug has been found and fixed in 0.1.10, but I'm still concerned about this happening again. As far as hashing performance, there's absolutely no change between 0.1.10 and older. The only noticable improvement for end users is the better backup pool logic, and slightly larger memory for stratum decoding. If your board is running stable on an old version, I would not recommend upgrading. Is larger memory for Stratum decoding possible to fix p2pool issue? vulgartrendkill: could you please post link for 0.1.10 firmware, or use PM if a private link is preferred. I will give a try and feedback here ;) acidfox: my board was delivered last week with 0.1.7 firmware, but the latest on TechnoBit's DOWNLOADS page is still 0.1.6 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: streetuff on December 22, 2013, 07:52:26 PM @marto
Order reference: BEFRLEGBC 2013-11-27 12:58:05 Shipped 2013-11-22 20:47:35 Payment accepted My 7 nano furys never showed up in the DPD tracking system. and they did not arrived yet. so... are they shipped or still in production? product page showed dec week 2 delivery in the description. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ccfly on December 23, 2013, 05:06:40 AM PLBBFVCKS 2013-10-20 ; 2013-10-20 09:19:09 Payment accepted
2.3 GH/s Full set Technobit NanoFury USB bitcoin miner x2 never came did you send it ?? in mail u tell us that all orders from november december shipped ???? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on December 23, 2013, 07:19:53 AM @marto Order reference: BEFRLEGBC 2013-11-27 12:58:05 Shipped 2013-11-22 20:47:35 Payment accepted My 7 nano furys never showed up in the DPD tracking system. and they did not arrived yet. so... are they shipped or still in production? product page showed dec week 2 delivery in the description. Same problem here: Order reference: SHCWXFRUL After a few PM and Mail - no reaction Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 23, 2013, 06:29:24 PM @ marto
please up the current firmware v0.1.10 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 24, 2013, 01:47:55 AM Debug information from S-Hash console: Trying pool 2, server 10.0.0.250:19332 as user shash: Miner 10.0.0.251 connecting to server 10.0.0.254:19332 unknown tag "jsonrpc" unknown tag "jsonrpc" unknown tag "jsonrpc" set difficulty 1 Response from pool too long. Wait or pick a different pool. unknown tag "jsonrpc" set difficulty 1 Response from pool too long. Wait or pick a different pool. unknown tag "jsonrpc" .... It seems the software could not handle p2pool stratum well :( "Response from pool too long" problem also sometimes happens with Eligius, I guess it is due to large generation transactions for payout? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 24, 2013, 07:12:28 AM "Response from pool too long" problem also sometimes happens with Eligius, I guess it is due to large generation transactions for payout? Correct. Because all stratum decoding is handled by small microcontroller, with just a few kilobytes of memory, it can be a problem sometimes. The theoretical requirement could be a few megabytes, so there's just no way it can be modified to handle all circumstances. Most other pools have much smaller requirements, because they only have a simple transaction to their own wallet. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 24, 2013, 07:47:32 AM "Response from pool too long" problem also sometimes happens with Eligius, I guess it is due to large generation transactions for payout? Correct. Because all stratum decoding is handled by small microcontroller, with just a few kilobytes of memory, it can be a problem sometimes. The theoretical requirement could be a few megabytes, so there's just no way it can be modified to handle all circumstances. Most other pools have much smaller requirements, because they only have a simple transaction to their own wallet. I see, then there is little hope for the S-HASH to work with P2pool. Currently I will stick with Eligius but fallback to HHTT to see how it works. Thanks for the help! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on December 24, 2013, 07:51:07 AM @ marto Doneplease up the current firmware v0.1.10 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 24, 2013, 07:51:12 AM I see, then there is little hope for the S-HASH to work with P2pool. Currently I will stick with Eligius but fallback to HHTT to see how it works. Thanks for the help! Another problem with p2pool is the fast block times, and the fact that the bitfury chips don't have an option to cancel the job they've started. This means that it would be impossible to avoid large percentage of stale blocks. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 24, 2013, 08:22:50 AM Another problem with p2pool is the fast block times, and the fact that the bitfury chips don't have an option to cancel the job they've started. This means that it would be impossible to avoid large percentage of stale blocks. I see... no wonder NanoFuries and Drillbit miners also have high dead rate (about 6%), like BFL miners. But the situation of these Bitfury miners is still better than average dead rate (6.7% in month) of p2pool network. Maybe because it is a common issue for mining hardwares, though with different causes. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 24, 2013, 10:45:31 AM It wasn't a good idea to update from v0.1.6 to v0.1.10.
procedure: Chose the file, upload the firmware. It takes a sec then i got the "reboot" site. Wait a few secs and click on "go back". After that the Miner isn't reachable any more. I check the dns entries maybe it got e new ip but it didn't got a IP. I tried to reset it with the button on board. Tried to power off for a while. But nothing happens. So what can i do now? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 24, 2013, 10:50:00 AM Try attaching a USB cable, according to these instructions, and see if you get a message there.
https://bitcointalk.org/index.php?topic=293030.msg3577975#msg3577975 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 24, 2013, 11:09:30 AM hmmm, at first view it seems good. But "DHCP ready 0" makes me a bit confuse. Does it mean the Board have a fix IP and don't use DHCP?
Here the output: Code: mac: ... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 24, 2013, 11:15:23 AM with command "dhcp on" the miner got a ip but if i try to load the webgui i was asked for username and password.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 24, 2013, 11:16:40 AM Try the command "user *"
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 24, 2013, 11:17:58 AM :-D thx
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ccfly on December 24, 2013, 02:54:08 PM why marto ignore questions and pm's ??
in 2 months after i pay'd for 2 usb miners still nothing ,web mail prolly go to trash auto and here only ignoring game how nice grrrrrrrr Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on December 25, 2013, 07:22:59 AM why marto ignore questions and pm's ?? Merry Christmasin 2 months after i pay'd for 2 usb miners still nothing ,web mail prolly go to trash auto and here only ignoring game how nice grrrrrrrr order ref ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: streetuff on December 25, 2013, 08:39:44 AM why marto ignore questions and pm's ?? Merry Christmasin 2 months after i pay'd for 2 usb miners still nothing ,web mail prolly go to trash auto and here only ignoring game how nice grrrrrrrr order ref ? Merry Christmas to you aswell. please look into my order reference BEFRLEGBC aswell. speedy tracking shows that the package never left sofia. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ccfly on December 25, 2013, 10:48:38 AM Merry Christmas to you aswell. :)
PLBBFVCKS order ref Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: falinka on December 25, 2013, 01:21:36 PM Merry Christmas guys!
@Marto, could you please take a look at order DZEZQXBKO from 2013-11-08, payed via PayPal? Is is in status Payment accepted since the day it was ordered. I know it's selected for custom shipping, but i never got any feedback on what to do / how to proceed :( Thanks, A. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: seaandy on December 25, 2013, 02:10:15 PM Hi Marto,
Merry Christmas, I send you also a few PMs and E-mails regarding my order QNNEYUNAT without any answer - could you tell me more about the shipment ?? in my account stay only payment accepted ( order from 03.12.2013 ) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: iongchun on December 27, 2013, 01:12:15 AM Correct. Because all stratum decoding is handled by small microcontroller, with just a few kilobytes of memory, it can be a problem sometimes. The theoretical requirement could be a few megabytes, so there's just no way it can be modified to handle all circumstances. Most other pools have much smaller requirements, because they only have a simple transaction to their own wallet. Running v0.1.10 firmware for more than 3 days with Eligius and HHTT: "Response from pool too long" only occured once with Eligius, and S-HASH switched to HHTT after some pool rejections. After some time it switched back, and kept working with Eligius again smoothly. Thanks cscape for the new firmware! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on December 28, 2013, 02:16:56 AM Dear, firends,
We shipped out today most of early December Hex16a2 (c) and Hex16b orders. Unfortunately we were not able to shipout all of the December orders yet. We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January. Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too. Nanofuries We send some orders today and due to some production delays , there are still orders that are late. We are scheduling production in the first days of January All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit . All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en (http://www.speedy.bg/begin.php?page=web_Tracking&lang=en) Wishing you Happy new year. Technobit team Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on December 28, 2013, 11:37:01 AM Hello all, still having problems with my s-hash. Already tried many configuration, already tried to upgrade the firmware from technobit (actually, version 0.1.10), already connected via usb to the console system for debugging. I can see it's connected to the pool, I can see notification like Code: set difficulty 512 but graphs are not updating neither on webgui nor on pool side. Tried with: give-me-coins pool deepbit.net pool ghash.io pool and tried pointing it to a bfgminer process in order to make it work as a proxied device (on the same bfgminer 1 erupter blade and 2 Hashbuster Micro are currently running without any problems). Configured with and without passwords, duplicating and not duplicating the same pool. I really need help, before considering this devide faulty and send it back.. more information here: https://bitcointalk.org/index.php?topic=379768 thank you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 28, 2013, 04:47:01 PM Can you test it with btcguild?
Have you overlock the miner per pencil mod? If the miner got to high voltage it has the same effect. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on December 28, 2013, 09:48:26 PM Just to make it clear
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December. So order placed on 1-st of December is not early December shipment order Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: ccfly on December 29, 2013, 12:54:45 AM hi !
did you send my 10month order of 2 usb nano miners ??? PLBBFVCKS order ref .. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on December 29, 2013, 11:46:25 AM Can you test it with btcguild? Have you overlock the miner per pencil mod? If the miner got to high voltage it has the same effect. Just unpacked and connected. No modification at all. I'll test it with btcguild and report asap. thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 30, 2013, 04:24:45 AM Just unpacked and connected. No modification at all. I'll test it with btcguild and report asap. thanks Have your board an dc connector or an 4-Pin Molex connecter? Please post us also the data of your power supply. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: nitrox on December 30, 2013, 06:53:13 PM upgrade s-hash from 0.1.7 to 0.1.10
get this Code: PHY ID 20005c90 MAC 0224 and can't connect ! on web and can't find iIP to connect ADD : fix it !!!! in command : dhcp on and s-hash start again Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on December 30, 2013, 07:08:19 PM You may also get a pop-up asking for username/password to get access to web interface. That can be disabled by typing "user *" in the terminal window.
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on December 30, 2013, 08:00:59 PM Just unpacked and connected. No modification at all. I'll test it with btcguild and report asap. thanks Have your board an dc connector or an 4-Pin Molex connecter? Please post us also the data of your power supply. no luck with btcguild. Board has a dc connector, PSU is a thermaltake PurePower TWV480 (actually, 80 watt used) (http://www.techtastic.ca/reviews3/twv480.html) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on December 31, 2013, 03:33:56 PM Quick question, are the fans on these boards 80mm? I`m going to replace them to help airflow.
Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 31, 2013, 08:23:08 PM Quick question, are the fans on these boards 80mm? I`m going to replace them to help airflow. Thanks The original fan is a 90mm. But if you want to optimize cooling you should make a case. You can use cardboard to make your own cheap case. Put a 120mm fan on left site, form the cardboard around the fan and put the shash board in. Use a fan with more than 200mł/h. Its the better choice because you are cooling the dc converter, too. Example image: http://imageshack.us/a/img18/6159/37dw.png Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on December 31, 2013, 08:25:56 PM no luck with btcguild. Board has a dc connector, PSU is a thermaltake PurePower TWV480 (actually, 80 watt used) (http://www.techtastic.ca/reviews3/twv480.html) Can you show us a pic of your connectors, please? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Foofighter on January 01, 2014, 12:27:22 PM Quick question, are the fans on these boards 80mm? I`m going to replace them to help airflow. Thanks The original fan is a 90mm. But if you want to optimize cooling you should make a case. You can use cardboard to make your own cheap case. Put a 120mm fan on left site, form the cardboard around the fan and put the shash board in. Use a fan with more than 200mł/h. Its the better choice because you are cooling the dc/dc converter, too. Example image: http://imageshack.us/a/img18/6159/37dw.png Here is the source link for the case: https://bitcointalk.org/index.php?topic=290328.0 Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 01, 2014, 01:40:41 PM Here is the source link for the case: https://bitcointalk.org/index.php?topic=290328.0 I want to show him how he can trink a simple, cheap and efficient case for his miner. This case isn't cheap or efficient... I had trink one especially for you in 3 min to show how easy it is: Data and temps: fan = 120mm ~280mł/h 12V room temp = ~17,35 °C dc converter = max. ~49,78 °C board chip side = max. ~27,48 °C board bottom side = max. ~ 28,88 °C https://imagizer.imageshack.us/v2/495x661q90/823/wsn0.jpg https://imagizer.imageshack.us/v2/495x661q90/36/vfmt.jpg Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 01, 2014, 07:07:57 PM no luck with btcguild. Board has a dc connector, PSU is a thermaltake PurePower TWV480 (actually, 80 watt used) (http://www.techtastic.ca/reviews3/twv480.html) Can you show us a pic of your connectors, please? Here they are: http://www.imagestorming.com/images/2014/01/01/20140101_195315.th.jpg (http://www.imagestorming.com/OqVi) http://www.imagestorming.com/images/2014/01/01/20140101_194312.th.jpg (http://www.imagestorming.com/OqVA) http://www.imagestorming.com/images/2014/01/01/20140101_194323.th.jpg (http://www.imagestorming.com/OqVT) Are you thinking about a cable (lack of Ampere) issue? Of course, you can see all the wires from the molex going to the connection, but only one black and one yellow are forwarded to connector. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 01, 2014, 07:44:11 PM Yes i think its a problem of the current supply.
Are you sure you have connected the cable right and didn't invert plus and minus? Inner terminal should be positiv and outer negativ. I hope the other 2 cables aren't (black, red) leaky!? Have you possibility to solder the 2 cables (yellow, black) from the 4 Pin-molex connector directly to the board? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 01, 2014, 07:56:23 PM Yes i think its a problem of the current supply. Are you sure you have connected the cable right and didn't invert plus and minus? Inner terminal should be positiv and outer negativ. I hope the other 2 cables aren't (black, red) leaky!? Have you possibility to solder the 2 cables (yellow, black) from the 4 Pin-molex connector directly to the board? the other 2 cables have been sealed with tape. Polarity should be ok (web interface ok, serial interface ok, air direction of fan correct). I would solder the 2 cables to the board directly, but only if this does not cause problems in sending it back, if after that we prove that it's faulty. marto74, what do you say? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on January 01, 2014, 08:16:20 PM Do the test, but maintain the polarity
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on January 02, 2014, 12:59:03 PM SHCWXFRUL 2013-11-22
I tried to contact you trough e-mail and message in your order system, but without any reaction.... i´m worried about Order SHCWXFRUL placed on 2013-11-23, Payment on 2013-11-25. Could you please update the status? Status is "shipped" since 2013-11-27 but the tracking number says that it is canceled.... When will these units be shipped? As many other Costumers i´m still waiting for an answer and the ordered Units..... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: gcube1305 on January 02, 2014, 10:51:51 PM Dear, firends, We shipped out today most of early December Hex16a2 (c) and Hex16b orders. Unfortunately we were not able to shipout all of the December orders yet. We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January. Hex16A ( avalon gen1) We did send out part of the last batch orders. There are some orders that will be out in the 1-st week of January too. Nanofuries We send some orders today and due to some production delays , there are still orders that are late. We are scheduling production in the first days of January All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit . All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en (http://www.speedy.bg/begin.php?page=web_Tracking&lang=en) Wishing you Happy new year. Technobit team HNY all, Glad to hear this, but as for me i'm still waiting for an OCTOBER delivery order (order EGRTGCXFP placed on 2013-10-03, marked as shipped since 2013-11-01)... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 04, 2014, 12:04:54 AM Yes i think its a problem of the current supply. Are you sure you have connected the cable right and didn't invert plus and minus? Inner terminal should be positiv and outer negativ. I hope the other 2 cables aren't (black, red) leaky!? Have you possibility to solder the 2 cables (yellow, black) from the 4 Pin-molex connector directly to the board? I soldered the 2 cables directly on the board, paying attention to polarity. Song didn't change, here's what written on console (usb cable) Code: set difficulty 512 then it starts over from the beginning. Any other idea accepted... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 04, 2014, 01:56:39 AM then it starts over from the beginning. Any other idea accepted... You have to activate DHCP or use a static IP. Easiest way is to use dchp. Type "dhcp on" in terminal, set your miner datas in the webinterface and report again please. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 04, 2014, 11:44:28 AM then it starts over from the beginning. Any other idea accepted... You have to activate DHCP or use a static IP. Easiest way is to use dchp. Type "dhcp on" in terminal, set your miner datas in the webinterface and report again please. it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 05, 2014, 11:42:21 AM it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining. Hi Lancelot, yes i see the miner was connect to any pool but then it was waiting for an ip. Maybe there is a problem with dns or your ip settings. If you want I can have a look at your miner per teamviewer. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 05, 2014, 03:11:11 PM it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining. Hi Lancelot, yes i see the miner was connect to any pool but then it was waiting for an ip. Maybe there is a problem with dns or your ip settings. If you want I can have a look at your miner per teamviewer. activated DHCP, same story Code: PHY ID 20005c90 MAC 023d I guess we should declare it officially dead. @acidfox, if you have time for a look via teamviwer, I want to thank you in advance for the assistance Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: MaxAlicante on January 06, 2014, 09:32:48 AM I am sorry to write this, but I have been scammed by technobit.
I made order of 6 Nanofury day 30/09/2013 and the bank wire day 03/10/2013. The status of my order is as "Awaiting bank wire payment" 06/01/2014 3 months have passed and the only reply from my emails to a technobit been "HI I'll check tommorrow" I take my money lost with this, I just want to warn other users of this forum to beware of this company. Order: - http://i641.photobucket.com/albums/uu138/MaxAlicante/1_zps0c6a0bb7.jpg Order status: - http://i641.photobucket.com/albums/uu138/MaxAlicante/2_zps8845a682.jpg payment: - http://i641.photobucket.com/albums/uu138/MaxAlicante/5_zps513d1605.png emails: - http://i641.photobucket.com/albums/uu138/MaxAlicante/3_zps1de4901e.jpg unique response received: - http://i641.photobucket.com/albums/uu138/MaxAlicante/4_zps4f244efa.jpg Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 10, 2014, 10:25:33 PM @marto74 via teamspeak acidfox and me did a lot of tests with the s-hash 40 ghs, and the result is that it's not working at all. In the past posts you can see all the story. I've also unsoldered the fan and connected it directly in order to undestand if it was draining too many power from the device. I've also discovered that the device is making a strange sound, like a tiny crackling while powered on. As said, it powers on, it connects to the pool it has a working webgui and a working console, but it's not warming up chips, and it's not mining. As I've already sent back a nanofury (1 out of 9 to be honest) and I still have no news about it, I would like to know how to deal with this problem asap, since It has been a lot of time since the order and i would like to get rid quickly of this issue (and the other with the nanofury too) and start mining before the end of this year.. thank you Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on January 10, 2014, 10:48:03 PM Ship it ASAP
I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2 What do you think? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 10, 2014, 11:03:34 PM Ship it ASAP I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2 What do you think? 1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days. I'll send all the related order information about the faulty one via pm or email. Please let me know. thank you again. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: marto74 on January 10, 2014, 11:07:55 PM Ship it ASAP I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2 What do you think? 1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days. I'll send all the related order information about the faulty one via pm or email. Please let me know. thank you again. Both sendings Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 10, 2014, 11:10:55 PM 1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days. I'll send all the related order information about the faulty one via pm or email. Please let me know. thank you again. Both sendings Deal. I'll send the shipping information and previous order information via pm and email too. Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Gamer67 on January 12, 2014, 04:53:15 AM I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others.
I can connect to BTCGuild and lukes. Anyone else ever have issues with not being able to connect ? I have updated to the latest firmware with no improvement. Is this the only interface that we can use to control our miners or is there a way to use something else ? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on January 12, 2014, 07:20:44 AM I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others. They probably use unsupported stratum commands. If you hook up USB debug cable, the firmware should tell you if it receives something it doesn't understand. Depending on what it is, I may be able to add it. It would have been nice if the most widely used bitcoin mining protocol had a specification... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Gamer67 on January 12, 2014, 08:18:52 AM I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others. They probably use unsupported stratum commands. If you hook up USB debug cable, the firmware should tell you if it receives something it doesn't understand. Depending on what it is, I may be able to add it. It would have been nice if the most widely used bitcoin mining protocol had a specification... I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem. Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button. This is kind of annoying as I really want to mine some alt coins but I cannot join the servers that I would like to. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: cscape on January 12, 2014, 08:34:14 AM I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem. Please post/PM the log. Quote Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button. Can you show exactly what's happening ? The firmware does not do anything with the URL, so I have no idea what's going on. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Gamer67 on January 12, 2014, 08:51:03 AM I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem. Please post/PM the log. Quote Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button. Can you show exactly what's happening ? The firmware does not do anything with the URL, so I have no idea what's going on. Sure. Where would I find the log ? Here is a screen shot of the problem with my user name being added to the URL after I submit. http://imgur.com/HJJXCXP Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: vulgartrendkill on January 12, 2014, 08:52:29 AM Hi Cscape,
Quick question. I`ve just tried to connect to Eligius (stratum server 3334) and the boards run for a minute or two then reset. Is there any work around? Thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: Gamer67 on January 12, 2014, 08:58:08 AM I assume this is what you mean.
Code: PHY ID 20005c90 MAC 023e That is as far as it will get. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 12, 2014, 10:18:20 AM Hi Cscape, Quick question. I`ve just tried to connect to Eligius (stratum server 3334) and the boards run for a minute or two then reset. Is there any work around? Thanks https://bitcointalk.org/index.php?topic=293030.msg4116968#msg4116968 (https://bitcointalk.org/index.php?topic=293030.msg4116968#msg4116968) No there isn't a workaround. Only thing you can do is to set Eligius to first pool and another pool as failover. The miner will switch between the 2 pools some times. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 13, 2014, 08:33:42 PM @marto74 still waiting for address confirmation (see pm). Can you send me the tracking code for the substituted device you've sent today? thanks Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 16, 2014, 07:31:54 PM @marto74 still waiting for address confirmation (see pm). Can you send me the tracking code for the substituted device you've sent today? thanks hello? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wuzamarine on January 19, 2014, 09:09:07 PM Has my order been shipped?
If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 20, 2014, 08:23:21 PM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wuzamarine on January 21, 2014, 12:25:21 AM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. BULLSHIT!! That website is completely full of shit. It still says I haven't paid. I have paid in full and I need a date and/or tracking. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on January 21, 2014, 08:11:14 AM Technobit acts not trustworthy! I had ordered on 2013-11-222 and payment through bankwire transfer was accepted on 2013-11-25 Delivery was planed for 2nd week of December 2013 I tried to contact Technobit through their homepage a few times - whitout any reaction. Here in the forum i contacted "Marto74". When i was lucky to get an answer, it was like: "I'll check this in the morning" or "Will try to ship in the next 2 days" But nothing happened! Last week, when i asked Marto another time for shipping, he offered me refund and i sent him my paypal Address and proof of my ownership of Bank account: Not yet Give me PayPal address for refund Please send refund to: *******.at Order SHCWXFRUL - € 1230,-- Payment was through bank wire transfere - so here is my proof of ownership of the bank account. [IMG*]http://********[/img] Where is my refund! REFUND! But still i have no nanofuries or refund! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: dplusf on January 21, 2014, 05:19:04 PM Technobit acts not trustworthy! same me. 22 november order. till today nothing! Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: lancelot6 on January 21, 2014, 06:17:05 PM marto, I think you have to give us a few answers. Escaping from it without facing all these problems will fuck your trustness here as a producer, as a vendor and as a person. We gave you money, and me and my friends (I'm sure you have realized that I'm not alone here in running our rig) are not new to legal action against non-serious people, even international ones. I don't want to start this kind of fight, and I'm sure all the others don't want it too, but you have to provide answers, refunds, and shipments FAST. This is one of the main forums on this stuff, screwing here means screwing your market. I'm sure you're pretty smart to understand what we're all saying. I'm still waiting for your replace product (as agreed), and related tracking code. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wuzamarine on January 21, 2014, 07:31:13 PM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. BULLSHIT!! That website is completely full of shit. It still says I haven't paid. I have paid in full and I need a date and/or tracking. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wuzamarine on January 22, 2014, 06:34:33 PM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. BULLSHIT!! That website is completely full of shit. It still says I haven't paid. I have paid in full and I need a date and/or tracking. HELLO! , HELLo HELlo HEllo Hello hello oo o . . . ECHO!, ECHo ECho Echo echo oo o Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 23, 2014, 09:39:37 PM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. BULLSHIT!! That website is completely full of shit. It still says I haven't paid. I have paid in full and I need a date and/or tracking. Then you should clear that befor you ask for shipping. I understand that you are not amused about that but if the website shows that you haven't paid why should they ship anything? So right marto a msg with all details and he will clear that mistake. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 23, 2014, 09:47:36 PM Technobit acts not trustworthy! But still i have no nanofuries or refund! Thats the Problem of people who can't read. Only a few customers got his nanofurys. I'am also waiting for mine. Marto is doing his best to produce and send them out. In past everyone got his miner from Technobit! And you can't speed it up with this sensless comments. And it helps nobody if you post your nanfury probs in the s-hash thread... Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on January 24, 2014, 06:30:13 AM but here is also the nanofury section....
Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 24, 2014, 08:40:48 PM but here is also the nanofury section.... you are right ;-) Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: acidfox on January 26, 2014, 09:54:21 AM @ Marto
Please give us an update for the nanofury orders. Whats the status of production? Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: southerngentuk on January 26, 2014, 12:14:26 PM ^^^^^^^^^^ I hope trashing every Technobit thread is not going to be necessary by everyone with outstanding orders, otherwise its sure gonna get messy.
I am not pro for the above, however am feeling the urge to join in. Its time for real promises and actions. Ignoring everyone is not helping here. For those supporting Technobit, please understand that those members loosing there cool here are just a small minority of an increasing large group that has been patiently waiting 2-3 months now, whilst it is not pretty it is understandable. Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: whiteEAGLE on January 26, 2014, 01:47:04 PM I am not going to write this in big letters, but i am also not happy with technobit.eu. i ordered on 22.11.2013 25 nanofuries, payment was sent through bankwire transfer and was acceptet by Technobit.eu on 25.11.2013. Delivery should have been in the 2nd week of December 2013 - but still not shipped. After writing to their support(team) - without any reaction, i contacted Martin here in the forum. His reactions were: On 5.12.2013 (Because the order was already marked as shipped with another order, but canceld on speedy.bg): Hello! I'll check this in the morningI tried to contact you trough e-mail and message in your order system, but without any reaction.... i´m worried about Order SHCWXFRUL (25 NF1) Could you please update the status? Status is "shipped" but the tracking number says that it is canceled.... When will these units be shipped? Stefan On 6.1.2014 i got this answer - but no items: Hello! I'll check this in the morningI tried to contact you trough e-mail and message in your order system, but without any reaction.... i´m worried about Order SHCWXFRUL (25 NF1) Could you please update the status? Status is "shipped" but the tracking number says that it is canceled.... When will these units be shipped? Stefan The Units should have been shipped last week... Best Stefan So what is going on wiht my order? It should have been shipped in 2nd week of December - now 2nd week of january is starting! 10 days later i contacted him again and he offered me refund - i didn't ask for it: Not yet Give me PayPal address for refund I sent him paypal Address and also an ID proof. But nothing happened till 16.1.2014 Is this truthworthy acting of a Businessmen? So, what are you - Martin - going to do? Refund or Items? Stefan Title: Re: TECHNOBIT S-HASH minig board, Technobit Nanofury and Bitfury chip distribution Post by: wuzamarine on January 26, 2014, 08:13:12 PM Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped? EDEGSUOLY have a look to your technobit account. then you know it. BULLSHIT!! That website is completely full of shit. It still says I haven't paid. I have paid in full and I need a date and/or tracking. Then you should clear that befor you ask for shipping. I understand that you are not amused about that but if the website shows that you haven't paid why should they ship anything? So right marto a msg with all details and he will clear that mistake. HE NEVER FREAKIN RESPONDS!!!! Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on January 27, 2014, 09:21:47 PM Dear,
Troll, I hope you are well. your sending is on it's way to you. 2 pieces HEX miners tested and programmed. You order is fulfilled so please stop this. You got what you paid for. The sending is insured so in case of damaged packaging , please let us konw. Happy trolling Best Regards: Technobit. p.s. I'm just wondering how long until some moderator happens to react. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: lancelot6 on January 28, 2014, 10:46:04 AM Happy to see that if I start posting with huge and colored text I'll have some answer.... Marto, still waiting for replacement, don't make me become blind in posting such messages for my situation (many mails on order reference LVMLEVBLF - 40 GH/s Full set Technobit S-hash 16 chip Bitfury based bitcoin miner) THANK YOU Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: Moikka2 on January 30, 2014, 05:53:35 PM This topic still open? (marto usually has answered here?, seem to be some flooding of msg here.)
wanted just to ask about NRHALGFHZ order status. asked through web page but no answer, just checking if marto answers here. also wanted to ask that why the new coincraft A1 are build on january/february 10/end of february? why not close older paid orders so would receive those on time? (wanted to order these new, but understand i need my old orders fulfilled on time first). if you have components etc to build the coincraft A1 (and problems with my order parts) -> , please see my request on my account to change from my order to this new model. Thanks. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 03, 2014, 03:03:38 PM OK, I GUESS WE HAVE TO GET REALLY LOUD FOR YOUR DUMB ASS TO PHUCKING LISTEN
WHERE THE PHUCK IS MY ORDER? WHAT IS MY ORDER STATUS? Your damn website STILL says I have not paid. Am I gonna have to run to bulgaria and snatch a kink in your ass? FUCKING RESPOND dipshit... EDEGSUOLY Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: cannachris on February 09, 2014, 03:02:50 AM can anyone post a firmware for the s-hash newer than the one on the technobit site and what is the best pool for these??
Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: joeventura on February 09, 2014, 04:50:56 AM Dear, Troll, I hope you are well. your sending is on it's way to you. 2 pieces HEX miners tested and programmed. You order is fulfilled so please stop this. You got what you paid for. The sending is insured so in case of damaged packaging , please let us konw. Happy trolling Best Regards: Technobit. p.s. I'm just wondering how long until some moderator happens to react. Hey Genius, Trolls are people who start arguments for the sake of starting arguments. These people are called your CUSTOMERS asshole. When they complain they aren't trolls, they are still YOUR customers and you are still an asshole Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 05:47:18 AM HI,
Joe how are you? Best Martin Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: cannachris on February 09, 2014, 07:20:58 AM HI, Joe how are you? Best Martin Martin don't take it personal. You build great miners and try your best to give everyone good service but since you must be making plenty money you should just hire one or two people just for customer support and I think you willl have more time to work on what you do best; making great miners!! Oh and I assume it is ok if I return my broken hex16a2 without the fan since I can't find it in between all my hardware? If I don't hear anything I will assume that that is ok with you and send the miner on monday Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 05:04:34 PM ???
Any proof photos of your wrong delivered miners???? Otherwise your are just trying to ruin my name ??? Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:15:04 PM ??? Any proof photos of your wrong delivered miners???? Otherwise your are just trying to ruin my name ??? That means, you don't even have proper record of what you sent me. Now I am REALLY worried. https://i.imgur.com/STE9Xnc.png Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:19:06 PM ??? Any proof photos of your wrong delivered miners???? Otherwise your are just trying to ruin my name ??? That means, you don't even have proper record of what you sent me. Now I am REALLY worried. https://i.imgur.com/STE9Xnc.png I sent you 2 payments. 1 for $820 and a second for $220. I have 3 of your $50 machines (not even worth the electricity). Just send me back the balance, I don't even want to deal with it. I will just keep them as a vivid reminded. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 07:27:04 PM You were sent for sure 24 Ghs units
Just change setings 1500 Mhs and 1100 mV Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 07:29:31 PM You were sent for sure 24 Ghs units Just change setings 1500 Mhs and 1100 mV and please a photo of the miner with date on the photo please. You just do not read what I did write to you AND PLEASE STOP WITH THIS SPAM AND INAPPROPRIATE LANGUAGE !!!!! Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:31:33 PM From these 2 screen shots, you can see I let a second device run for a minute. It pegs out at 7gigs. That's about 20 gig/s shy
Somebody shipped the wrong ones. Only looked at the second payment and totally disregarded the first $820. https://i.imgur.com/CMC3yQM.png https://i.imgur.com/B3luNFs.png Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:33:07 PM Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 07:33:43 PM HOW MANY TIMES I have TO WRITE THE SAME
PLEASE READ!!!!!! 1500 MHS and 1.0 - 1.1 V !!!!! ALSO PLEASE USE LATEST HEMINE VERSION https://technobit.eu/index.php?controller=attachment&id_attachment=29 (https://technobit.eu/index.php?controller=attachment&id_attachment=29) You are using old one :) But instead of SPAM you can spare a few minutes and read in the tread or our download page. I do not understand you are not very clever or just your point here is not to run miner boards , but to SPAM!!! Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:35:16 PM What, is it like creeper weed and hits you about an hr later?
You're just full of shit or so utterly disorganized which makes you full of shit. I'll send the units back. I want a FULL refund. I was gonna let you hold on to some of the sale but I just want you gone. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:38:57 PM HOW MANY TIMES I have TO WRITE THE SAME PLEASE READ!!!!!! 1500 MHS and 1.0 - 1.1 V !!!!! ALSO PLEASE USE LATEST HEMINE VERSION https://technobit.eu/index.php?controller=attachment&id_attachment=29 (https://technobit.eu/index.php?controller=attachment&id_attachment=29) You are using old one :) But instead of SPAM you can spare a few minutes and read in the tread or our download page. I do not understand you are not very clever or just your point here is not to run miner boards , but to SPAM!!! It zero's out https://i.imgur.com/jPbAJ0B.png Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 07:43:03 PM I see you are not capable to fix this your self
use hexminer 1.0.0.3 And being in the forum is not up to you. I understand that being american you think you can order others, but this is not the fact . MIND YOUR LANGUAGE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I just wonder is there a moderator here ;) Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:43:28 PM HOW MANY TIMES I have TO WRITE THE SAME PLEASE READ!!!!!! 1500 MHS and 1.0 - 1.1 V !!!!! ALSO PLEASE USE LATEST HEMINE VERSION https://technobit.eu/index.php?controller=attachment&id_attachment=29 (https://technobit.eu/index.php?controller=attachment&id_attachment=29) You are using old one :) But instead of SPAM you can spare a few minutes and read in the tread or our download page. I do not understand you are not very clever or just your point here is not to run miner boards , but to SPAM!!! It zero's out https://i.imgur.com/jPbAJ0B.png Speed goes to NaN at those settings. After restart of everything. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 07:48:30 PM just conect the board to 12 V and to PC
and give TW and pass I'll log and set this for you Ok? Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 07:52:59 PM just conect the board to 12 V and to PC and give TW and pass I'll log and set this for you Ok? I am fine as long as I have what I paid for. Your 'lack of communication' really makes life difficult for the customer. It's still zeroed out with the new miner. Update: After a few minutes, it creaps up to 0.032gh/s ??? https://i.imgur.com/cKCkEwD.png Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 08:05:29 PM something I noticed in your screens
Please stop all stratum proxy windows and start again. You are changing pools so if an old proxy is running first the new one is not connected Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 08:31:03 PM something I noticed in your screens Please stop all stratum proxy windows and start again. You are changing pools so if an old proxy is running first the new one is not connected I am completely shutting down the software in between any config change, I already discovered it likes to stick. I shut down the software, launch it, change config, shut is down again, launch it. Then it is restarted in a manner to ensure the setting made it in from startup. same issue. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 08:34:30 PM something I noticed in your screens Please stop all stratum proxy windows and start again. You are changing pools so if an old proxy is running first the new one is not connected I am completely shutting down the software in between any config change, I already discovered it likes to stick. I shut down the software, launch it, change config, shut is down again, launch it. Then it is restarted in a manner to ensure the setting made it in from startup. same issue. I tried your pool to. same https://i.imgur.com/5rhztzy.png Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: seaandy on February 09, 2014, 10:05:14 PM ??? Any proof photos of your wrong delivered miners???? Otherwise your are just trying to ruin my name ??? ruin your name, you are himself ruin your name you scammer you ripp me of 2112€ for December delivery and I can see fucking scammer and your company deliver only of 20 or 30% of your customer and scamm the rest I propose you refund to my paypal account but you don't have answer on my PM or my Email - I wan my money immediately refund to my paypal account and I promise you in any of you thread I post may expirience with your fucking scamm company Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 10:11:28 PM Order ref ?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 10:30:37 PM Order ref ? Any thoughts on my issue? I still have only 5 mh/s . It's still broke. I have not received what I paid for. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on February 09, 2014, 10:42:38 PM Order ref ? Any thoughts on my issue? I still have only 5 mh/s . It's still broke. I have not received what I paid for. conect a board to pc and to 12 PSU Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: seaandy on February 09, 2014, 11:00:21 PM Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 09, 2014, 11:01:35 PM Order ref ? Any thoughts on my issue? I still have only 5 mh/s . It's still broke. I have not received what I paid for. conect a board to pc and to 12 PSU I just sent you the authentication via PM Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: wuzamarine on February 10, 2014, 03:55:52 AM Order ref ? Any thoughts on my issue? I still have only 5 mh/s . It's still broke. I have not received what I paid for. conect a board to pc and to 12 PSU I just sent you the authentication via PM With it in buffer mode, it has to much draw. but I take it off buffer and it runs full speed, but full speed is only 7 gig/s http:// Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: Zich on February 10, 2014, 07:44:44 AM Order ref ? Any thoughts on my issue? I still have only 5 mh/s . It's still broke. I have not received what I paid for. conect a board to pc and to 12 PSU I just sent you the authentication via PM With it in buffer mode, it has to much draw. but I take it off buffer and it runs full speed, but full speed is only 7 gig/s http:// Could you please post your miner(electronic side) picture? Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: seaandy on February 11, 2014, 10:24:03 PM Martin you fucking scammer , what about my order QNNEYUNAT , you receive my payment of about 2112€ early December and till yet no Delivery, I want my money refund you scammer , you are stolen my money I send you my paypal account by PM and of course no Answer - by your fucking company normally situation I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata Give me my money you fucking scammer Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: joeventura on February 12, 2014, 12:36:08 AM ??? Any proof photos of your wrong delivered miners???? Otherwise your are just trying to ruin my name ??? ruin your name, you are himself ruin your name you scammer you ripp me of 2112€ for December delivery and I can see fucking scammer and your company deliver only of 20 or 30% of your customer and scamm the rest I propose you refund to my paypal account but you don't have answer on my PM or my Email - I wan my money immediately refund to my paypal account and I promise you in any of you thread I post may expirience with your fucking scamm company Change the name of the company to Technobit Lottery Co. Send us your money, maybe you get something in 3 months, maybe we screw you. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: cannachris on February 12, 2014, 12:47:21 AM can anyone post a firmware for the s-hash newer than the one on the technobit site and what is the best pool for these?? c-scape? anyone? my s0hashes keep switching pools. there is no software possibility to overclock these right? since mine run at ~33gh @ ~29 degrees celcius Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: intron on February 12, 2014, 11:46:28 AM can anyone post a firmware for the s-hash newer than the one on the technobit site and what is the best pool for these?? c-scape? anyone? my s0hashes keep switching pools. there is no software possibility to overclock these right? since mine run at ~33gh @ ~29 degrees celcius S-HASH can be overclocked by changing a resistor value. Look for resistor R01T near the power module and replace it for one with a lower value. Not sure what it is now, try 100K/82K/70K. Only try this when you know what you do though! You can damage the board when the output voltage is made too high. Read the datasheet of APTS050A0X3-SRPHZ for more info. intron Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: hennessy10009 on March 10, 2014, 11:33:16 PM i made a order for which i do not want the service any more. plus he did not invest in anything with the order i placed after kindly asking for a refund a here and his website he ignores me(which he will do to you as well). They will only help you if it's to there benefit. I have any order YVJZQFUXB which he refuses to help me get a refund for, plus look at the other customer on this forum he ignores . If you like taking aspirin order from here . If you don't believe me ,don't order nothing form he until you get a responds from there customer service(or lack of customer service) on there website and see if you get a responds .
Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: marto74 on March 26, 2014, 08:14:22 PM order ref please ?
Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: imagina on April 07, 2014, 10:45:54 AM Ordered yesterday 2x 7 GH/s HEX 16A and 2x 24 GH/s HEX16A2.
Today i received an update saying that my order has been sent with a tracking number. The tracking number still has no status on the order, will wait one more day.. Keeping my fingers crossed! Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: ZBC3 on April 08, 2014, 01:09:20 PM Is the package going international ? Check tracking on speedy.bg. If going intl, then the item will be handed to another courier. If going to US, most likely is DHL.
Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: imagina on April 09, 2014, 04:40:29 PM It is being delivered in Europe.
I already have a status of the order, it has been handled to DPD and it's coming my way!! Cheers EDIT: I have contacted support two times and they always replied quickly and been very supportive! Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: hennessy10009 on April 17, 2014, 05:14:01 AM It is being delivered in Europe. I already have a status of the order, it has been handled to DPD and it's coming my way!! Cheers EDIT: I have contacted support two times and they always replied quickly and been very supportive! this is a fake post . show us a tracking number. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: imagina on April 21, 2014, 09:44:39 AM Fake post why?
I have received my order, everything went fine. I will not show you a tracking number because it has my name and address. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: hennessy10009 on April 22, 2014, 12:41:39 AM Fake post why? I have received my order, everything went fine. I will not show you a tracking number because it has my name and address. technobit has the worst customer server, its highly unlikely that someone would have anything good to say about them. Also a tracking number only has the city and state where the package is going.Providing the tacking number wouldn't release any sensitive information, if you even have one. Title: Re: TECHNOBIT S-HASH minig board and Bitfury Post by: buckrogers on July 31, 2014, 08:13:10 PM you should try to talk to martin on skype, he is a very pleasant person to talk to. haha
|
