Bitcoin Forum

Easy to use linux and windows platform with AMD and NVIDIA memory timings Smart Tune.
Site: https://app.mmpos.eu/ (https://app.mmpos.eu/)

Join and talk to us at:
Discord link: https://discord.gg/P5J6Z5h (https://discord.gg/P5J6Z5h)
Telegram link: https://t.me/mmpos_intl (https://t.me/mmpos_intl)

What is mmpOS?

Its a mining platform, optimised for stability and ease of use.
We provide a highly optimised ubuntu based linux os which runs our agent to handle overclocking, memory timings and miner management.
If you prefer Windows, we provide a standalone Windows agent too.
Everything is managed via an unified dashboard.

We are a paid solution with 8-14 devices free, forever.
To test our platform you additional to the free devices receive 180 credits to play with.
You pay per your daily device usage.

Supported hardware and requirements (mmpOS):

- To run mmpOS you need an at least 4GB usb stick (8GB recommended)
- Recommended memory is >= 4GB, although it works fine with 2GB for a couple of GPUs.
- SSD/HDD install is supported but not needed

Supported hardware and requirements (windows agent):

You are in charge of drivers and windows install. Also windows needs a SSD/HDD and more memory then mmpOS (linux)
Otherwise latest AMD and Nvidia driver is recommended. If you use AMD and modded bioses you need to apply the driver patch.
Compute-mode will be enabled automatically.

There is no additional software required except "atikmdag-patcher" if you use modded bioses on AMD Polaris.

Supported workers: (mmpOS)

Mixed rigs are supported, but as usual NVIDIA must be first in order (nvidia need to be in main 16x slot, via riser is fine)
We support different drivers to play with, but all listed cards should work with default installation.
Similiar to mixed rigs you can mix and match any generation of cards.

We support overall up to 22 GPUs per rig. (depending on PCIe slots and CPU/Motherboard)
AMD: Maximum of 13 GPUs (motherboard hard limit)
NVIDIA with display: Maximum of 13 GPUs (motherboard hard limit)
MIXED: 13 AMD or NVIDIA
NVIDIA without display(Mining editions): Tested with 19 P104-100 and 18 P106-100 on Asus mining expert B250.

GPUS:
 AMD
   Tonga: R9 280[X], R9 380[X].
   Hawaii: R9 290[X],390[X].
   Fiji: R9 Fury[X], R9 Nano
   Polaris: RX460, RX470, RX480, RX550, RX560, RX570, RX580, RX590
   Vega: All RX Vega56/Vega64 and Vega FE
   Navi: RX 5500/5600/5700
   Radeon VII ( Vega20 )
 AMD Limited support
   Tahiti: HD 7xxx series. While it runs fine, overclocking is not supported, use VBE to mod bios since SI don't support powerplay.
 NVIDIA
   Maxwell: Full support for NVIDIA 750Ti and 8xx, 9xx series[not very useful for mining].
   Pascal: All 10x0 series
   Volta: Never tested but should be supported.
   Turing: All new RTX series are fully supported, including fan settings.

FPGAS:
  SQRL Acorn: all available acorns should be supported tested with CLE 215+ and only miner for tribus has been included. If you happen to have different SQRL Acorn device you
   have to setup your miner using custom.sh implementation.
  https://i.ibb.co/w6gK4Mx/miner-screen-cli.png (https://ibb.co/w6gK4Mx)

CPUs:
  All modern CPUs should be supported, although sensor support is included for Haswell, Sandy Bridge, Ivy Bridge and later for Intel and Ryzens for AMD.

Supported GPUs: (Windows)

Again you are in charge of the drivers, otherwise every card normally working on windows should work too.
Windows has some restrictions of cards per rig, if you have 8+ cards per rig, we recommend using mmpOS directly.

Features:
- Automatic memory timing tuning (SmartTune) on Vega, Pascal cards. Polaris with small boosting. Different levels and algo options for tuning.
- Overclocking and Power consumption control (either via voltage or watt limiting)
- GPU resetting on failure( must be enabled by user settings.ini - linux mmpOS only ).
- Automatic fan management (you set target temperature and fans will be adjusted automatically)
- Automatic update of miners (fixed version possible)
- Live and 30 day history of hashrates, temp/fans and other metrics
- Remote control for rig via teleconsole ( must not be used to update/upgrade system ).

Planned features:
- Farm support (create groups of rigs and grant others access to them)
- Multiple miner support (currently we support only one miner at the same time)

CLI helper(mmpOS):
In case some more experienced users or more familar ones with basic linux cli knowledge wants to do additional tweaks or perform more advanced operations.
Once you login via ssh using standard user 'miner' and default password or preset one, you will be greeted with 'helpme' output.
There is one command that is used for debugging 'debugme'. If you find yourself in trouble you can present the output of it in our telegram or discord channels.
The more interesting commmand though is 'mmp'. With this small app you can do lots of powerful things. Type 'mmp help' to reveal its full potential.

We offer lots of 3rd party apps inside the heart of mmpOS.
- atiflash - used to flash AMD bioses.
- nvflash - used to flash NVIDIA signed bioses.
- amdmeminfo - reports extended GPU information for enthusiasts.
- amdmemtweak - powerful memory tweaking tool - available for enthusiasts( Make sure to disable SmartTune before using - use with caution ).
- OhGodATool - maybe the first available Polaris powerplay tweaker - available for enthusiasts( might break agent settings - use with caution ).
- MMP VegaTool - our own Vega10(Vega56/64) powerplay tweaker - available for enthusiasts( might break agent settings - use with caution ).

Who are we;

We are two guys who started this project early 2018 with the intention to prove mining can be easier and without spending too many hours awake in order to
keep an eye on your rigs's health.
Then, with the help of a few friends and supporters, gained more courage, knowledge and wisdom to give birth to mmpOS and release it to the public.

First use FAQ
Q: What to do after I have downloaded `mmp-latest.img.gz`?

A: After successful download of `mmp-latest.img.gz` depending on the operating system you're using you should do the following:

A1: Windows10 - Go to https://www.balena.io/etcher/ and download latest Balena Etcher. Install and start it, choose Source: `mmp-latest.img.gz` and destination your USB/HDD/SSD drive.
WARNING!!! Be careful not to select a drive that has valuable information on it! Double - Triple verify to which drive you're writing!
After successful write a small partition of 19MB will appear writable with assigned drive letter, if it doesn't appear unplug/plug the drive and confirm it appears.
NOTE1: Go to https://app.mmpos.eu/, log in with your account and navigate to `Rigs` menu, then click on Get mmpOS(where you downloaded the image), click on Autoconf,
fill in any of the optional fields(your rig desired hostname and rig desired password) and click on `Generate and download`.
A file named autoconf.txt will prompt for saving, place it in the small partition which appeard in device manager earlier.
Unplug drive and plug it in your Rig, power it on and monitor your dashboard for newly created rigs.
NOTE2: If for some reason no rig appears in dashboard, please plug monitor to your first GPU(PCIe x16 slot or iGPU on motherboard) and watch for errors.
If you are unaware whats going on with the boot process, please contact us as soon as possible to resolve your issue.

A2: Windows7 - Steps on Windows 7 are the same as Windows10 except for the small partition appearing, it is not always recognized by Windows7.
After successful write, if small exfat partition does not appear, please put USB drive on either Windows10 PC or use one of the 2 other methods to register rigs.

A3: Linux/Mac OSX - These operating systems have built in tools to write directly onto attached USB drives.
NOTE3: All commands must be executed with admin privileges, a.k.a root, Ubuntu and similar linux distros can use `sudo` as prefix to cmds.
Linux: wget -O -  http://mirror.mmpos.eu/images/mmp-latest.img.gz | zcat | dd of=/dev/sd[X] bs=1M # Where sd[X] is your USB drive
WARNING!!! Be careful not to write to drive that has valuable information on it! Double - Triple verify to which drive you're writing!
Mac OS X: wget -O -  http://mirror.mmpos.eu/images/mmp-latest.img.gz | zcat | dd of=/dev/disk[X] bs=1M # Where disk[X] is your USB drive
WARNING!!! Be careful not to write to drive that has valuable information on it! Double - Triple verify to which drive you're writing!
Follow `NOTE1` for both Linux and Mac OS X. If linux does not recognize exfat partition, refer to your distro packages and install exfat-utils and exfat-fuse.

First steps after successful boot.

Q1: What should I do when the rig boots for the first time?
A1: Wait for the rig to appear on dashboard either via its mac address as hostname or the hostname you set in autoconf.txt.
A2: If you haven't provided proper autoconf.txt then you should attach monitor and wait for rig to display the IP it has. If you are on the same subnet as the rig is you should go to Dashboard->Rigs->Add rig
and type the IP you see on the monitor. If registration is successful the new rig will appear in Rigs menu and you can continue with next steps.
A3: If you are not on the same subnet type `ALT+F2` and login with default credentials. Then simply type `mmp register YOUR-RIG-CODE` where YOUR-RIG-CODE is the one in Dashboard->Rigs->Add rig->Rig code.

Q2: What is the first thing I should do after I see my rig in Rigs menu?
A4: First thing is to go to Dashboard->Wallets and add your wallet for the desired currency(Coin) you wish to start mining. After you have added your wallet, next step is to move left to Dashboard->Pools.
Click on `Add pool` and choose the currency(Coin) you just added your wallet. Under `Hostname` you fill the pools stratum address without `stratum+tcp://` or similar additions, just the domain of the pool.
Under `Port` you fill the pool's stratum port. Next is setting up the `Username` part which can be different for different pools, usually most common macro setup is %wallet_address%.%rig_name%%miner_id% -
Refer to `Macro definitions` section for more information. Click save and move left to `Miner profiles` addition. Click `Add profile`, choose your currency(Coin) to which wallet belongs, choose the platform you are running:
Linux/mmpOS or Windows 10, choose your desired miner( For every currency(Coin) there may be several miners, if you are unsure ask in telegram/discord ). If you need to add additional command line parameters to the miner you can
do that by editing params in `Advanced` section of your miner profile. If that is setup correctly, click save and move to the left one more time. Click on `Rigs`, click on your newly created rig and click `Configure`.
We are starting again from Right->Left. Click on `WORKER CONFIGURATION`, choose your device and click `Config`, set your custom device clocks/voltages/powerlimits(If unsure ask in telegram/discord).
You can save each setting using our `Global presets` by clicking on `Presets` save icon, load icon for loading a predefined preset. Click Update and move to the left to `MINER CONFIGURATION`. Set your desired
Target temperature, set your desired fan adjustment time and click `Update`. Move to the left in `GENERAL` section, name your rig if you want and from the dropdown menu `Miner profiles` select your precreated profile.
Click `Update` and monitor the status of your rig(Refer to FAQ section).

Frequently asked questions

Q1: How to mod timings on my GPUs? Where are AmdMemoryTweak and OhGodAnEnEthlargementPill?
A1: They are in `/opt/mmp/bin` directory part of `mmp-extra` package.
A2: We provide our own solution for automatic memory performance adjustment called `Smart Tune`, instead of putting values yourself we've already done 4 presets for each memory hard algorithm.
A3: If you still want to use them despite our solution, feel free to disable `Smart Tune` and use `custom.sh` to load your settings.

Q2: How to flash my NVIDIA or AMD Polaris bios?
A4: When you login via ssh type `mmp help`, we have provided atiflash and nvflash utilities for managing vbioses in cmd line.

Q3: Why can't I just upload/download GPU vbios via dashboard?
A5: Because its lowlevel task which usually puts at risk your hardware, we prefer you keeping your eyes constantly on that specific task.

Q4: Can I use custom miner or modified supported miner?
A6: Currently custom miners are not yet supported, we plan to introduce that feature in recent future.
A7: Depends on modification you can go copy miner binary over supported one in `/opt/mmp/miners/supported-miner/miner.bin` and use dashboard to launch it.
Keep in mind that if there is current miner update it will overwrite your modification.

Q5: Can I mine with Nicehash, Mining Rig Rentals and other similar pools?
A8: Yes you can, there are specific miner/pool settings for them to use but it is 100% possible.
A9: We do not provide BTC wallet support because BTC is not mined by GPUs/CPUs but you can use the coin responding to NH/MRR/MPH algorithm - for example choose ETH for Dagger-hashimoto and name it: ETH-NiceHash
and put your Bitcoin address.

Macro definitions of dashboard variables

Pool macros:
%pool_protocol% - Enables or disables SSL support for pools
%pool_server% - Equals stratum/pool server. ex. eu1.ethermine.org
%pool_port% - Equals stratum/pool server port. ex. 4444
Example: %pool_server%:%pool_port% = eu1.ethermine.org:4444
Example1 Claymore noSSL: %pool_protocol%%pool_server%:%pool_port%  = eu1.ethermine.org:4444
Example2 Claymore SSL: %pool_protocol%%pool_server%:%pool_port%  = ssl://eu1.ethermine.org:4444
User macros:
%user% = Pool->Username->%wallet_address%.%rig_name%%miner_id%
%wallet_address% = Wallets->Address
%rig_name% = Rigs->Name
%miner_id% = Miner identification in multiminer(1,2..)
wallets->address = 0x1234567891011121314151617181920212223
rigs->name = myRig1
Example Claymore noSSL: %pool_protocol%%pool_server%:%pool_port% -ewal %user% = eu1.ethermine.org:4444 -ewal 0x1234567891011121314151617181920212223.myRig1
%password% = Pool->Pool needs password(default x)
Example Claymore noSSL: %pool_protocol%%pool_server%:%pool_port% -ewal %user% -epsw %password% = eu1.ethermine.org:4444 -ewal 0x1234567891011121314151617181920212223.myRig1 -epsw x

Api Port:
%api_port% - depends on miner it usually determines to which port our agent should listen for miner API reports.

Non miner specific macros:
%gpu_idxs% - adds comma after each GPU Index - 0,1,2,3...
Example: If you have 6 GPUs and want to enable dual threads for specific miner, instead of typing --opencl-devices 0,0,1,1,2,2,3,3,4,4,5,5 , you can replace with %gpu_idxs%,%gpu_idxs%

Miner specific macros:
%grinpro_amd% - specifies amd indexes for GrinPro miner. Ex amd:0,amd:1
%grinpro_nvidia% - specifies nvidia indexes for GrinPro miner. Ex 0,1

Miner specific settings in URI mode:

Special characters in variables
You can use the %xx (xx=hexvalue of character) to pass special values. Some examples:

Code   Character
%25   %
%26   &
%2e   .
%2f   /
%3a   :
%3f   ?
%40   @

Rig problems and solutions.

Q1: What is the difference between OK, Miner down and Rig down status?

A1: When status `OK` is seen it means rig has successfully started mining and you should see hashrate and shares coming from it.
A2: When status `Miner down` is seen it means agent is running but miner is down and is not performing properly.

Q2: How can I see why there is status `Miner down`?
A3: Usually when there are misconfigured parameters sent to miner cmd line lots of notifications indicating `Miner restarted` will appear in dashboard. If that is the case, please review your miner command line parameters.
A4: When there is no notifications other than `Miner down` you should login via ssh and type `debugme` and send the link output to one of our associates in telegram or discord to review the issue.
If you are more experienced in linux cli you can monitor logs in /var/log/mmp/agent.log and /var/log/mmp/miner.log and try to resolve the issue yourself. You can also issue `dmesg` command and seek for hardware faults.

Q3: What does `Rig down` mean?
A5: It means that either your rig is offline by unknown reason or agent has no access to the dashboard(No agent<->dashboard communication).
A6: If you have local access to the rig but still remains `Rig down`, login via ssh and type `debugme` and send the link output to one of our associates in telegram or discord to review the issue.

Q4: Why there is no display on my local monitor?
A7: Usually happens when native resolutions aren't supported on your monitor. There shouldn't be a problem to run headless though.

Q5: What does `Low hashrate` notification message mean?
A8: It means last iteration of hashrate gathering is lower than the previous which triggers that alarm. Usually happens when one or more GPUs crash.

Q6: How to find out which GPU crashed?
A9: Thats a tricky task, you can do that by logging via ssh right after rig has booted and monitoring via `miner` command alias.
A10: You can disable miner and system watchdog if and wait for `Low hashrate` alert and then login via ssh and type `debugme` and send the link output to one of our associates in telegram or discord to review the issue.


Q7: What if I see other issues that are not listed here?
A11: These are usually most common issues you will see. If by any chance you have other issues, do not hesitate to contact us via our official telegram group or discord server.

https://i.ibb.co/tmWJg5Z/dashboard1.png (https://ibb.co/tmWJg5Z) https://i.ibb.co/yFgSvty/fah.png (https://ibb.co/yFgSvty)

https://i.ibb.co/DkZ6b5R/configure2.png (https://ibb.co/DkZ6b5R) https://i.ibb.co/Nr5RX2J/configure1.png (https://ibb.co/Nr5RX2J)

https://i.ibb.co/Dpp22z3/stats2.png (https://ibb.co/Dpp22z3) https://i.ibb.co/T8bb3xp/configure3.png (https://ibb.co/T8bb3xp)

https://i.ibb.co/rmKjLKq/stats1.png (https://ibb.co/rmKjLKq) https://i.ibb.co/YThxXgh/stats3.png (https://ibb.co/YThxXgh)

MMP built-in coin support:

ANON - using equihash(zhash) algorithm
AEON - using cryptonight-light algorithm
AION - using equihash(210,9) algorithm
BBS Coin(BBSCOIN) - using cryptonight-light algorithm
Beam(BEAM) - using equihash 150,5 algorithm
BitTube(TUBE) - using cryptonight-saber variant algorithm
Bitcoin Diamond(BCD) - using BCD algorithm algorithm
Bitcoin Gold(BTG) - using equihash(zhash) algorithm
BitcoinZ(BTCZ) - using equihash(zhash) algorithm
Bitsend(BSD) - using xevan algorithm
Bytom(BTM) - using bytom algorithm
Denarius(DNR) - using tribus algorithm
Electroneum(ETN) - obsolete(cryptonight original overtaken by ASICs)
Ethereum(ETH) - including Ethereum classic(ETC) - using ethash algorithm
Ethereum fork - all forks using ethash algorithm except ETH and ETC or nicehash
FeatherCoin(FTC) - using neoscrypt algorithm
Gentarium(GTM) - using lyra2z algorithm
Graft(GRFT) - using cryptonight v8 variant
Gravium(GRV) - using x16r algorithm
Grin(GRIN) - using cuckaroo29/cuckatoo31 algoirthm
Loki(LOKI) - using cryptonight-heavy variant
LuxCoin(LUX) - using phi2 algorithm
Masari(MSR) - using cryptonight-light variant
MonaCoin(MONA) - using neoscrypt algorithm
Monero(XMR) - using cryptonight v8 variant
Motion(XMN) - using x16r algorithm
Phoenix(PNX) - using neoscrypt algorithm
PigeonCoin(PGN) - using x16s algorithm
Raven(RVN) - using x16r algorithm
Revolver(REV) - using x11 evo( obsolete overtaken by ASICs) algorithm
Ryo(RYO) - using cryptonight-heavy variant
Suqa(SUQA) - using x22i algorithm
TurtleCoin(TRTL) - using cryptonight-light variant
UFO - using neoscrypt algorithm
Ubiq - using ubqhash algorithm
Veil - using x16rt algorithm
Vertcoin - using lyra2v3 algorithm
XDNA - using hex algorithm
Zcoin - using MTP algorithm
Zcash - using equihash(overtaken by ASICs - to be considered obsolete) algorithm

MMP built-in miners supported:

GrinPro - propietary cuckaroo29/cuckatoo31 AMD/NVIDIA miner with 2% devfee - http://grinpro.io *HOT*
EWBF Equihash - propietary equihash(zhash) NVIDIA miner with devfee - https://bitcointalk.org/index.php?topic=4466962.0
lolMiner Equihash - propietary equihash(zhash) AMD miner with devfee - https://bitcointalk.org/index.php?topic=4591317.0 - version 0.7 supports Beam mining *HOT*
xmrig-amd - Open source AMD cryptonote miner. - https://github.com/xmrig/xmrig-amd
xmrig-nvidia - Open source AMD cryptonote miner. - https://github.com/xmrig/xmrig-nvidia
xmr-stak -Open source AMD and NVIDIA miner(requires config adjustments via cli) - https://github.com/fireice-uk/xmr-stak
/ we have preserved devfee to support XMRig,XMR-Stak developers! /
cast_xmr - propietary cryptonote miner with devfee - http://www.gandalph3000.com/
teamredminer - pripietary lyra2z,phi2,cryptonight v8 miner - https://github.com/todxx/teamredminer
ccminer - Open source NVIDIA multialgo miner based on - https://github.com/tpruvot/ccminer
CryptoDredge - propietary NVIDIA multialgo miner with devfee - https://cryptodredge.org/
t-rex - propietary NVIDIA multialgo miner with devfee - https://bitcointalk.org/index.php?topic=4432704.0
bminer - propietary NVIDIA equihash,ethash,bytom miner with devfee - http://bminer.me/
Claymore-Dual - pripietary AMD/NVIDIA ethash + second coin miner with devfee - https://bitcointalk.org/index.php?topic=1433925.0
Claymore-zec - propietary AMD equihash original miner with devfee ( obsolete ) - https://bitcointalk.org/index.php?topic=1670733.0
Claymore-cryptonote - propietary AMD cryptonight original(v7) miner with devfee ( obsolete ) - https://bitcointalk.org/index.php?topic=638915.0
dstm-zec - propietary NVIDIA equihash original miner ( obsolete ) with devfee - https://bitcointalk.org/index.php?topic=2021765.0
ethminer - Open source AMD and NVIDIA ethash, progpow miner officially supported by MMP founders! - https://github.com/ethereum-mining/ethminer
Phoenixminer - propietary AMD and NVIDIA ethash, ubiqhash miner with devfee - https://bitcointalk.org/index.php?topic=2647654.0
sgminer-uni - Open source multialgo miner based on - https://github.com/nicehash/sgminer
sgminer-fancyx - Open source multialgo miner based on - https://github.com/fancyIX/sgminer-phi2-branch
wildrig-multi - propietary AMD multialgo miner with devfee - https://bitcointalk.org/index.php?topic=5023676.0
z-enemy - propietary NVIDIA multialgo miner with devfee - https://bitcointalk.org/index.php?topic=3378390.0

Reserved

Awesome. first to reply!

Everyone should try this out. The team has worked very hard on getting this public!

Even though I'm not into mining anymore I've tested the platform on my old rig since windows was driving me nuts.... and yes, it's really good.
Very user-friendly setup, nice interface and very easy communication with the devs

I've been looking for mining os for my older cards so this is great I was wondering if Pitcairn is supported I have some 270,280, and 390's what do I need to do to control the clocks Thanks

Hi, we support 280,380 out of the box, in order to control Hawaii(390) and Pitcairn you have to switch to experimental variant. Once installed login via ssh and type mmp-update --set-experimental && mmp-update. We are currently experimenting with r9 390 and it seems to work just fine but official stable variant is still pending until all tests pass.

As of 01.01.2019 we have current miner versions:

EWBF Equihash - v0.6
lolMiner Equihash - v0.6
xmrig-amd - v2.8.7
xmrig-nvidia - v2.8.7
xmr-stak - v2.7.1
cast_xmr - v1.6.6
teamredminer - v0.3.8
ccminer - v2.8.1
CryptoDredge - v0.15.2
t-rex - v0.8.9
bminer - v11.0
Claymore-Dual - v12.0
Claymore-zec - v12.6
Claymore-cryptonote - v11.3
dstm-zec - v0.6.2
ethminer - v0.18-staging
Phoenixminer - v4.0b
sgminer-uni - v1.0.9
sgminer-fancyx - v5.6.1
wildrig-multi - 0.15.8
z-enemy - v1.28

We are constantly updating miners and adding new coins to our wallet support list, feel free to propose miners of your choice!
Happy New 2019 to all!

This is one of the easy and troubleless platform I ever used , just plug the USB and everything you want to do is on your phone or PC . I love it.

This is the first mining OS that was able to actually set voltages for Polaris cards. I tried a lot of alternatives and they were not able to suit my needs. You can switch to different algos with the most recent mining software in no time.
The Telegram community is very active and the devs are working 24/7 to provide new features and support the users.

Definitely worth trying.

New version released: mmp-2.6.8_public_beta

CHANGELOG

Added new tool - mmp!


Upgraded base layout system.
Reduced EFI partition to 256MB.

Important change - autoconf.txt no longer provided within vfat partition, you can now safely copy newly generated one from dashboard!

Added simple FTP server pointing to /mmp-config directory. You can backup your configs via FTP now.

Easy to use mining specific operating system - i've been using it for a few months, and i can't imagine a better OS for mining out there. Good job guys!

I've been using this for about a month or so and really like it. I've never mined before. I got interested after buying some Whalesburg tokens and watching their progress with their mining pool made me want to learn more. So, I bought a GPU for an old PC and tried a few different mining operating systems before being advised by an experienced miner to try this one so I did.

Out of all those I tried I liked this, particularly as the telegram group is populated by really helpful, nice people, even to the point of improving my BIOS to get the most out of it. I've now added a second card :-)

It is very easy to get up and running, just download the disk image, shove it on a USB then boot with a config file from the website, where you just configure any pools/mining choices. The tweaking of the overclocking stuff works really well, and others have said it's the only OS that actually works properly to set the voltage (I set all my initial settings as per advice from the telegram group).

I went from never having done any mining, to watching my pool profits come in, in literally no time (admittedly, I'm a software developer which probably helps). I'd thought it would be a lot more complex to be honest and I can't actually see how anyone could make it any easier.

I've been using the latest update for 24 hours, and only whilst here writing this have I read about the new mmp tool which is really nice having just tried it, and the existing debugme tool is simple but brilliant.

Jeremy
PS The combination with this and Whalesburg is all I need. If anyone wants to try Whalesburg pool (here is an on-going comparison with this and other pools https://mirelle.io/whalesburg-easy-to-use-profit-switching-pool/ (https://mirelle.io/whalesburg-easy-to-use-profit-switching-pool/)) feel free to use my referral code which is BLQ0 (see https://whalesburg.com/?p=BLQ0 (https://whalesburg.com/?p=BLQ0)) if you don't have any of their tokens as I think you'll get a better income.

CHANGELOG 27.01.2019

Updated agent to version 2.5.5
Added support for GrinPro miner for both AMD and NVIDIA 6+ GPUs
Added additional support for allium, lyra2Zz, lyra2rev3 with sgminer-fancyx for AMD.
Started initial work on MMP Smart NVIDIA tune where all NVIDIA Pascal get tuned if memory is being used. Expected ethash hashrate increase ~1/2% for Samsung and Micron ones. Expected ethash hashrate increase ~15% for Hynix 3G/6G NVIDIA GPUs.

Thank you for choosing MMP OS!

CHANGELOG 31.01.2019

We are proud to announce MMP NVIDIA Smart Tune, which gives all NVIDIA Pascal GPUs a small ethereum/cryptonight/grin boost in hashrate.
During our long development period we have managed to detect memory vendor of NVIDIA gpu and report it to our dashboard for your information and clock configuration.
So here are some results we have managed to gather:

* 1060 3GB Hynix *
UBIQ mining from 19.8MH to 23.9MH with smart tune enabled.

* 1060 6GB Micron *
UBIQ mining from 23.1MH to 23.8MH with smart tune enabled.

* 1060 6GB Samsung *
UBIQ mining from 24.4MH to 25.1MH with smart tune enabled.

* 1070 8GB Micron *
UBIQ mining from 31MH to 31.5MH with smart tune enabled.

* 1080 and 1080Ti *
Results are similar to OhGodAnEnlargementPill but we made small improvement and should get a boost of ~0.5%.

We will submit more bench results when we gather enough data to compare between stock and tuned.

----

Important MMP base update:
We now support restore.txt as one time hostname/password setup/restore.

----

Thank you for choosing MMP OS!

anyone tested grin pro miner speed under linux for amd?

Yes it works good.
2gps for 580s and 3+gps for Vega56/64.

CHANGELOG 13.02.2019

Introducing: Smart tune factor, where you can adjust your NVIDIA tune without losing stability!
Start work on Radeon Vega Smart Tune.
Introducing Ryzen+NVIDIA full support - in order for your beloved NVIDIA to work on Ryzen family motherboards once you boot you need to edit ~/settings.ini and set If you happen to have FM2 motherboard and is not booting with more than 2 GPUs at a time, boot with just one, edit ~/settings.ini and set There are plenty of options that we haven't fully explaind, if you have specific needs, don't hesitate to contact us on discord or telegram!
Introducing driver variant "Highly Experimental". Uses linux kernel 5.0, NVIDIA driver 418.30 and ROCm OpenCL.
To migrate to it just type You can always return back to any other profile by typing Supported variants currently are:

Stable - mmp set-variant stable - boot default, uses linux kernel 4.18.20, NVIDIA 410 driver series and OpenCL 18.10 for Polaris, 18.40 for Vega.
Unstable - mmp set-variant unstable - uses linux kernel 4.18.20, NVIDIA 415 driver series and OpenCL 18.10 for Polaris, 18.40 for Vega.
Experimental - mmp set-variant exp - uses linux kernel 4.20.1, NVIDIA 415 driver series and OpenCL 18.10 for Hawaii(full support of AMD Hawaii family - 290,390).
Highly Experimental - mmp set-variant hiexp - uses linux kernel 5.0.0, NVIDIA 418 driver series and ROCm OpenCL 2.1( Suitable only for Radeon Vega family )
Legacy - mmp set-variant legacy - uses linux kernel 4.18.20, NVIDIA 390 driver series and OpenCL 18.10 for Polaris, 18.40 for Vega( Suitable for Older NVIDIA family - Maxwell, Kepler )

Show ASIC and HBM2 temperature in cli console.
You can see step-by-step writing image to USB/SSD/HDD in discord #faq
Don't forget to join https://discord.gg/P5J6Z5h

All miners are auto updated and you don't have to do anything, you can set static version if you don't want auto updates!

CHANGELOG: 17.02.2019

Added new driver variant: radeon7
To enable type: mmp set-variant radeon7 && mmp upgrade
Upgraded linux kernel to 4.19.23 on unstable and radeon7 variants.
Small bug fixes and UI enhancements.

Thank you for choosing MMP OS!

# 02. March 2019 Update agent + dashboard

* Updated agent to 2.7.0
* Optimized overclocking for AMD vega
* Added support for AMD Vega 56/64 smart tune of timings (samsung memory only)
* Added Vega memory vendor/type detection
* Streamlined smart tune. Now only off, auto, low, med and high.
* Added display of asic (amd) and hbm2 (amd vega) temperatures to dashboard
* Fix for AMD dpm state detection on mixed rigs
* Optimized power usage of AMD cards if mining is disabled

Thank you for choosing MMP OS!

Supported miners update list: 08.03.2019

Soon to be expected custom miners and secondary miner.
Thank you for choosing MMP OS!

Introducing - Frankenstein rig v1.0.0

https://i.imgur.com/LxQao4z.png
https://i.imgur.com/zVoPnF8.png
https://i.imgur.com/ga9ZyOC.png

With that given we are proud to announce support in stable for All AMD generations past Tahiti!

Small note: Since Tahiti(HD79xx) don't support powerplay it is advised to use them bios modded.
Thank you for choosing MMP OS!

# 22. March 2019 Update agent + dashboard

We changed a lot in the internals of the agent. One change which has been added is, that AMD overclocking now shortly stops mining before applying changes.
This should help with some crashes caused by overclocking and running miner.

We also completly redesigned the overclocking dialog within the dashboard. Its now better optimized for mobile and also lets the user choose
which parameters should be touched by the agent and which one should be left alone. You also have the choice of using the sliders or text input.

Another change is that we switched servers for downloading miner software, which allows us to check if a redownload of an already existing file on the rig is actually needed or not.
Old server is still used as fallback.

* Updated agent to 2.7.2
* Optimized overclocking on AMD
* Optimized vega smart tune
* Added possibility to enable hardware/bios based fan management per AMD GPU
* You now can override per GPU the targetTemperature to use. You still need to enable fan-management on your rig.
* Added new main server for miner download + fallback + reduced need to redownload
* Optimized miner management, to support multiple miners in the future
* Redesigned overclocking dialog in dashboard
* Optimized coin selection in dashboard

Some CN/r results
https://i.imgur.com/Ax1LV8W.jpg
https://i.imgur.com/n0sSvPH.jpg

Thank you for choosing MMP OS!

# 27. March 2019 Update agent + dashboard

* Updated agent to 2.7.4
* Added support for miniZ equihash miner
* Fixed small bug related to some AMD cards
* Removed AMD Vega Memory Voltage settings, its disabled for most vendors anyways and just causes problems

please tell me what settings you have achieved this result?

Hello, the grayed ones are the settings of the GPU.
Using teamredminer with —cn_config 16+15 and Vega64 Red Devil

Hello, the grayed ones are the settings of the GPU.
Using teamredminer with —cn_config 16+15 and Vega64 Red Devil
[/quote]

AMD memori tweak under this used?

We do not use any external tools, we have our own optimization. Memory tweak tool is just a tool it does nothing if you don’t have the correct sets. Our solution is complete and its called “MMP Smart Tune”.
The current position of “Tune factor” is set to “high”.
EDIT:
P.S: MMP Smart Tune™ precedes AMD Memory Tweak tool.

does your OS support nicehash? not found BTC wallet

Wallets per coin are algorithm based. Choose your coin that matches the algorithm you want to mine and set BTC wallet to it by naming it for example: Grin-Nicehash
Then setup pool according nicehash requirements and configure your mining profile choosing the miner that serves your needs, assign miner profile to your rig and if no configuration errors all should be ok.

Here are the steps:
https://i.imgur.com/pRV7wyA.png
https://i.imgur.com/6OIBny0.png
https://i.imgur.com/d6YAWWY.png
https://i.imgur.com/IxrE9hr.png

You can always join our discord or telegram channels for further instructions and support.

# 02. April 2019 Update agent

* Update agent to 2.7.6
* Optimized smart tune for AMD Vega
* Added support for overclocking on AMD Radeon VII
* Fixed overclocking problem on AMD Vega if changing clocks between over/under 1107Mhz

Thank you for choosing MMP OS!

Hi

I have a problem with agent 2.7.7
I have 2 rigs (1 amd and 1 nvidia) with agent 2.7.7 and miner is down
on other 4 rigs with agent 2.7.6 is all ok....

What can I do to fix

thanks

Hi, first try to reboot rig, if that doesn’t fix the issue, please contact us via our discord or telegram channels.

08. April 2019 Update agent + dashboard

Updated agent to 2.7.7
Added smart tune for hynix based AMD Vega
Added support for miners without an api (starting with nodecore veriblock)

Hi all,
It seems that we forgot to announce/document new feature on boot and failure and this confused some of our users.
Since base version 2.7.22 there are two notifications using built in pc speaker.
On Boot: 2 short high frequency beeps and 1 longer high frequency beep to announce successful boot of your rig.
On Failure: When miner triggers reboot via reboot.sh/watchdog.sh 2 short low frequency beeps and 1 longer lower frequency beep.
If you are annoyed with this, please do share your thoughts on this. Should we move that to custom choosable option in settings.ini or leave default?
Thank you for choosing MMP OS!

Some Turtle coin (cnv8_trtl) results:

TeamRedMiner 0.4.3 under MMP OS 2

 4xVega 56(Vega 64 bios) core 1050mHz/845mV memory 1100mHz/845mV  80mH/s @ 690W from wall

https://imgur.com/xBHYNJj

https://imgur.com/0Jjvpp3


Thank you for  MMP OS!

16. April 2019 Update agent + dashboard
With this release we started windows support (without smart tune), for closed beta testing. If you have windows rigs and want to test please contact us via telegram or discord.

Updated agent to 2.7.8
Added support for NBminer and NoncerPro api
Added support for latest AMD drivers available in unstable. You can now use ROCm with Polaris on x16 riser connected on at least x4 slot! It speeds up lolMiner 0.7.1 with ~25% on BeamHash.

# 18. April 2019 Update agent

* Updated agent to 2.7.9
* Optimized smart tune on AMD Vega a bit
* Optimized DPM auto detection on AMD. It now always work on multiple increasing and decreasing of CoreClock.

# 22. April 2019 Update agent + dashboard

* Updated agent to 2.7.10
* Renamed smart tune auto to default
* Added algorithm option for smart tune, AMD benefits most of it.

P.S. Additional notes.
There is also small NVIDIA bump by algorithm but its hardly noticable on low powerlimit.
Also grin/equihash tuneAlgo brings very little improvement on AMD, but it seems it makes hashrate more stable.
We will probably need some more feedback on  cuckoo/equihash tuneAlgo preset.

Thank you for choosing MMP OS!.

P.S2: In order to use rocm 2.3 one must choose unstable version: mmp set-variant unstable && mmp upgrade.
After upgrade type 'mmp amd-opencl-install' and choose 4.(ROCm 2.3).

Some Turtle coin update results:

TeamRedMiner 0.4.4 under MMP OS 2 agent 2.7.10

4xVega 56 (Vega 64 bios) hashrate jump from 80.8 MH/s to 87.8 MH/s

https://imgur.com/y2NWzsj

https://imgur.com/vPur2K3

Nice work :)

Great !!
Do you  have any plans for haven and xcash?

BR
Murat

Hi, those can be mined by other miners and still use smart tune.

# 24. April 2019 - Driver upgrades

* Added NVIDIA driver 430.09-beta to unstable variant.
* Added AMD driver 3.31.0 to unstable variant.
* Added AMD driver 3.30.0 to experimental variant.
* Added AMD OpenCL driver 19.10 to unstable variant as Latest.
* Updated experimental variant with kernel 5.1(rc6) and NVIDIA driver for it to 430.09 - it now supports ROCm 2.3.0( experimental variant is strictly for enthusiasts! )
* Fixed Radeon VII GPU temperature report in unstable variant
* TODO - Vega and Radeon VII fan management control - should be ready in agent version 2.7.12.

# 04. May 2019 Update agent + dashboard

With this release we are introducing OC Presets to the dashboard.

You now can save your GPU Configs to named presets and apply them to your rigs with a few clicks.
One OC Preset can contain multiple GPU Configs so you easily can organise them for example per Algo.

* Updated agent to 2.7.12
* Optimized agent fan management for AMD Vega and Radeon VII. (using rpm instead of pwm)
* Added User OC Presets to dashboard.

Two video tutorials on how to use MMP Global OC presets.
* Note that Global presets are determined by GPU type, GPU memory vendor and GPU memory amount. *
* MMP Global OC presets are not applied per rig, they match all GPUs matching upper criteria. A sneak peek on MMP Custom OC profiles will be released soon! *
* Stay Tuned! *

http://mirror.mmpos.eu/pub/ (http://mirror.mmpos.eu/pub/)

# 09. May 2019 - Driver upgrades

* Updated NVIDIA driver to 418.74 for stable variant.
* Upgraded linux kernel to 4.19.41 for unstable variant.
* Upgraded AMD driver to 3.31.0(1) for unstable variant.
* Added NVIDIA driver 430.09-beta to unstable variant for new kernel.

# 07. May 2019 Update agent

* Updated agent to 2.7.13
* Partially reverted fan management change. AMD Vega uses pwm again. Radeon VII still uses rpm.

Hi,

I'm using this for my vegas and FE. Coming from windows this is a blessing. 2.4 on FE (from 1.9 in windows). Kudos to the team!

I can't figure out if my rig is auto tuning. I have the smart tune box checked and the algorithm set to cryptonight, but my monero hashrate numbers aren't changing.

is the smart tune for cryptonight, and not cn/r? Do I need to manually overclock for cn/r ?

Please check miner profile advanced settings and change cn_config from 8+8 to 15*15(Vega64) or 14*14(Vega56).

hrm, well my rig has 2 vega64 and 2 vega56. As far as I can tell, there's no way to assign these commands to individual GPUs

There is. depending on the order of Vega56/64 here is example setting:

OK, thanks. And the syntax is 15*15, not 15 + 15 (as i've seen elsewhere with teamredminer)... and i should use 15 and 15, not 16 and 15 (as ive seen elsewhere?).

Also, how long does the autotune take? I assume I should just let it go. But I don't see the timings or volt changing in the minercli thing yet.

This is rather more detailed conversation which is meant more for our discord/telegram chats. If you don't mind please join either of our chats(they are bridged) so we can provide more detailed and reliable support.
Thank you for your support.

i friggin hate those things, making me use my cell phone. Are you on IRC?

Yes, freenode #mmpos

Hello team.

Nice work so far, love the updates!

Would you be willing to add support for Algo-Switching with a tool like the MoneroOcean Meta miner ( https://github.com/MoneroOcean/meta-miner ) ? This will provide basic algo switch functionality for most stratum miners. It would be even better if the concept can be used for an improved mmp version of the meta miner like you guys did with the AMD Memory tweek.

This will be a very loved feature for the community that uses MoneroOcean and other algo switching communities.

Thank you!

Thank you for the response. We will add this to our feature request TODO list and keep you posted on its progress.
And thank you for liking our Smart Tune, it will soon be extended even more :)

# 25. May 2019 Update dashboard + agent

This release added basic smart tune support for AMD Polaris cards, but is also a big step in preparing a public windows agent release.
We now support smart tune on windows too and also added some convenience windows only features like, enable compute mode, ability to setup autostart of agent on login.

* Updated agent to 2.7.14
* Added basic smart tune for AMD Polaris cards (RX 4/5XX)
* Small boost for NVIDIA Smart Tune
* Improved logging within agent
* WIN: Added smart tune
* WIN: Fixed voltage for AMD cards

# 26. May 2019 Update agent

* Updated agent to 2.7.15
* Fix AMD auto dpm setting on non agent overclocked GPUs.
* Fix disabled miner idle setting - now waits for miner to shutdown completely.

* Updated base to 2.7.40.
* Added GPU recovery to be default disabled, remove your current /home/miner/settings.ini to activate the option. If you want to enable GPU recovery, set it to 0 in settings.ini

wher can i donwload latest image? im allready using software, but could not find newst version on backend :D

Hi, to update system to latest agent either reboot it or login via ssh and type: mmp update ( confirm with Y ).
To update system drivers to latest login via ssh and type: mmp update && mmp upgrade ( confirm both with Y ).
Thats it, no need to reimage :)

Hmm... i have 10x vega rigs on you system. Slowly adding more. But im little noob :)  How is the easyest way to get the IP-s to login in via putty? Login info is what? For me, it says all my rigs are not up to date. just restart wont help i quess.

Click on rig -> system -> Local IP Address
There is your local IP to which you can connect, simple reboot will update agent, amdgpu firmware, extras and base. Drivers require manual cli interaction to complete.

# 09. June 2019 - Update amdgpu driver and opencl for unstable variant

* Updated amdgpu driver to 3.32.0 for unstable variant.
* Updated amdgpu rocm opencl to 2.5(25.00) for unstable variant.
* Fixed nvidia package with missing libGLdispatch lib.
* Added user miner to video group for user opencl related tests.
* Fixed issue with mmp expand command not working in some cases.

Today i try  the OS  with this settings :

6x Asus-P106-100 6 gb Samsung Gpus. The system was working fine @windows 10 with Claymore 14+ on ETH . ( the OC settings r Core:+175, Memory +750 @75 watt  )

On MMPOS it was not able to get it stable (  on Linux its memory +1500 ) . İ try it with and without the smart tune .

So i lower the memory to +1350 ( on winsux its +675)  was also not stable .
Then i try to lower the core to +150  with memory +1350 . still not stable on every smart tune mode .

Maybe i did somthing wrong maybe its the driver . ( i use the old cuda 10 drivers on winsux . 418+)

İ try it also with more juce ( 80 watt ) but still not stable for me .

Also try it with the phoenix miner but same ....

P106-100 work on P0 state by default, not sure how you get stable +750 on windows...its kinda pushing to the edge.
Micron stable settings for me  were +75/+900(+450 windows),  samsung +75/+1300(+650) , hynix +75/+1100(+550). All these were on powerlimit of 80W.

how do you actually update the softwarE? the web portal says i need to update, but i can't find the config and the helpme in the console don't have it.

Two ways actually, one is ‘mmp update’ which will update repository based pckages and second is ‘mmp upgrade’ which will upgrade system drivers as specified for your system variant.

my first post here on this forum but a long time reader, been using mmpOS for about a month now and i am super happy with how stable it is!
just set it and forget it.
Thanks!

# 17. June 2019 - Base partial rewrite and OpenCL lib update for unstable

* Update mmp-base.
`mmp update` and `mmp upgrade` are now smarter. System updates are now a bit faster due to less loops executed.
Driver upgrades now only trigger if there are actual available upgrades.
In case of available driver update you will be asked to confirm actual upgrade process.
System will automatically restart only on kernel change.
After successful driver upgrade you will now be asked to reboot, not forced.
* Added `mmp sysinfo` option which exports running and latest versions for 3rd party integrations.
* Various small fixes and cleanups.
* Updated OpenCL to 19.20 for unstable variant

With great power comes great OS!

# 19. June 2019 Update agent + dashboard

This update is in preparation of full FPGA support, we are starting with SQRL Acorn's.
It currently only displays basic information, but we are working hard on multiple miner support, which enables us to allows us to show hashrate of acorns too.

This release is also the first public Windows agent version. We plan to release agent updates for windows and mmpOS (linux) together.

* Updated agent to 2.7.16
* Fixed AMD Radeon VII overclocking in some cases
* Added memory detection for AMD Radeon VII
* Improved SmartTune for AMD Vega with hynix memory
* Added support for basic details display of Acorn FPGA in agent and dashboard

Hi, we support the miner but there is no actual option to switch to XWP, according to devs it should switch automatically.
EDIT: Fixed support for GrinPro, with their attempt to fix miner for another mining distro, they broke our support.

Added mmp-addin-drivers package to latest base 2.7.54.
For now it only adds support for  Tplink archer t4u (rtl8812au) usb wifi.
If you come up with unsupported device, please let us know so we can add it to this package.
Thank you!

27. June 2019 - Added NVME support for reimage and expand

Update mmp-base.
Added `mmp register YOUR-RIG-CODE` command as final option if dashboard or autoconf.txt failed.
Added support for NVME devices in reimage and expand commands for mmp cli.
Added support for 3rd party drivers via package mmp-addin-drivers.
Updated linux kernel to 4.19.56 for unstable variant
Possible fix for amdgpu and H81/H110 chipsets in unstable variant.

What happened on July 3 update? Power usage just spiked quite a bit. Didn’t make any changes at all to the rigs recently

There weren’t any updates on agent side for July yet.

# 08. July 2019 Update agent

* Updated agent to 2.7.17
* Added support for per GPU invalid shares in Ethminer, TT-Miner, Claymore and Phoenix miner
* Prepared geolocated download locations for miners (higher download speed from non EU countries)

Hello, can I ask which tool do I have to use in order to copy the image to a Sata HDD? I have used HDD Raw Copy Tool but when I start the HDD in the rig I get this message and it hangs:

Scanning for btrfs filesystems
MMP_base: clean, 61027/244320 files, 607975/980731 blocks.

Regards.

Mariano.

Hello,
We recommend usage of etcher because it can write image without uncompressing it first but after being uncompressed it can be written with hdd raw copy too.
From what I see you are already booting the system but amdgpufb can't switch because your monitor doesn't support native resolution switching, as a workaround you can use built-in GPU or boot headless with autoconf.txt placed in small exfat partition. I will update first post with additional qucik FAQ.

Yes I am booting from an old 1366 Asus motherboard with no built in GPU as a Vega test bench. I have uncrompressed the image with 7z and then I have used HDD Raw Copy to copy the image file to the HDD. I have another motherboard but is an old 775 with built in GPU (G41 Chipset). It is preferable to use the 775 with built in GPU instead of the 1366 one?

All AMD hardware after Polaris need displaycore enabled to boot in gfx environment, due to Vega being superior ASIC you can boot headless as an option. It will boot properly without any display attached. We have disabled Displaycore support because otherwise the first GPU that has attached monitor will suffer some hash loss. But if needed it will be returned in image.
Please try booting headless with autoconf.txt inside small exfat partition.

Awesome work you guys are doing keep it up ;)

Hello, I have sucessfully booted headless with the autoconf.txt in the small partition. Is there any tutorial for configuring the system for Team Red Miner and Vegas for use them with Monero? Since I have not found so much information regarding Monero pools, etc.

Regards.

Mariano.

Great! From now on you can do all from your dashboard. Usually starting from right->left for initial configuration.
Add your wallet, Add pool(mind that different pools have different configurations for username), Add miner profile for XMR(we recommend using teamredminer) and finally assign your rig the miner profile you've created.
Can give you example for xmrpool.eu pool:
Select monero coin(XMR), select your XMR wallet
pool host: xmrpool.eu
pool port: 9999
ssl enabled: yes
In username section when creating pool write this
Last line is static diff sent to pool.

In miner profiles advanced settings leave default or use --cn_config from known good working configuration(else ssh to rig and run benchmark first).
You can also add additional line in advanced settings "--watchdog_script /opt/mmp/sbin/" to enable automatic reboot on GPU failure.

For more instructions I advise you to join our discord or telegram channels.
Thank you for choosing MMP OS :)

# 21. July 2019 Update agent

* Updated agent to 2.7.18
* Added dual fan support for NVIDIA cards (mainly turing)
* Added basic support for AMD Navi RX5700/XT.

# 01. August 2019 - System drivers upgrades

* Updated linux kernel to 5.2.5 for experimental variant.
* Added support for fan control of AMD Navi.
* Updated NVIDIA driver to 430.34 for stable variant.
* Updated NVIDIA driver to 430.40 for unstable and experimental variants.
* Updated NVIDIA libNVRTC to CUDA version 10.1.168

Miner additions:
Added TT-Miner support for windows and linux - https://bitcointalk.org/index.php?topic=5025783.0
Added nanominer support for windows and linux - https://bitcointalk.org/index.php?topic=5089248.0

# 25. September 2019 Update agent + dashboard

This update is a big one, we now support running multiple miner instances per platform (Nvidia, AMD and SQRL Acorn's).
So currently you can run up to 3 miners in parallel.

If you mine with multiple miner instances to the same pool, we recommend to add %miner_id% to your pool username.
It will suffix the username if miner instance is > 0 (so first miner will be rigname, second one rigname1)

Next step will be supporting CPU mining.

* Updated agent to 2.8.0
* Added multi-miner support to dashboard and agent
* Agent no longer queries fpgas for info. Every stat will now be gathered via miner.
* Added native ninjarig protocol support
* Added multiple new amd gpu and memory types to detection
* WIN: Now also supporting the "automatic mode" to add a new rig
* WIN: Added voltage display support for recent nvidia cards

# 02. November 2019 Update agent + dashboard

This update introduces CPU mining. Similiar to multi-miner support, just add a cpu profile and start mining.
As with GPUs we provide metrics like Temperature and Voltage for recent CPUs as well.

* Updated agent to 2.8.1
* Added CPU worker support to agent and dashboard
* Added native xmrig protocol support
* Optimized AMD memory detection. (Navi and others are supported too)
* Fixed Hawaii and Fiji memory overclocking bug

# 08. November 2019 Update agent and experimental variant

This update makes AMD Navi cards fully supported if you use the experimental variant of mmpOS.
Navi is still not supported by all miners but you are now able to mine and overclock if you have compatible miner and switch to the experimental variant.

* Update agent to 2.8.3
* Support for Overclocking and voltage control of AMD Navi(RX 5500/5700) cards.

# 07. November 2019 Update agent

* Update agent to 2.8.2
* Optimized miner download verification (ensure hashfile is valid)
* Improved startup with unsupported GPUs, we now allow startup after a 60second retry phase even if detected pci devices do not match driver reported ones.

are you guys gonna support randomx?

We already do. A few hours before the fork we will switch arguments line in advanced miner settings for xmrig from cn/r to rx/0, same goes for xmr-stak-rx.
RandomX was introduced with our CPU mining support a few weeks ago. You are welcome in our discord/telegram channels if you have any problems setting it up.

# 30. November 2019 Update agent

With this release we introduce a completely new mining experience for your AMD RX Vega56/64 GPUs.

We created a special smart tune algorithm option called *compute heavy*, which reduces power usage without hashrate penalty for compute heavy algos like MTP, CNGPU, x16r/t/v2, x21, x22i, x25x and Lyra2RE.

Everything we do is driven towards success of our not so big community. We have put a lot of effort creating these features, so users save power and enjoy profitable mining again.
So, MMP OS community, **Thank you for staying with us and believing in us!** We will do our best to keep the pace in MMP OS development process.

We would like to say **Thank you** to teamredminer (https://github.com/todxx/teamredminer) developers(todxx and Kerney666) and their awesome community for creating their amazing miner and helping us become better!

We would also like to say **Thank you** to lolMiner (https://github.com/Lolliedieb/lolMiner-releases) developer Lolliedieb for his outstanding work and contribution to the mining community.

* Updated agent to 2.8.4
* Improved memory based smart tune for AMD and Nvidia
* MMPOS: added compute heavy smart tune for AMD Vega56/64
* MMPOS: optimized power usage for AMD Vega56/64

AMD Vega56/64 Powersave recommendations

GPU | COIN | MEMORY VENDOR | CORE CLK | MEMORY CLK | POWERLIMIT | VOLTAGE | TUNE
RX Vega 56 | ZCOIN | SAMSUNG | 1220 | - | - | 0.818 | Default/Compute Heavy
RX Vega 56 | ZCOIN | HYNIX | 1220 | - | - | 0.818 | Default/Compute Heavy
RX Vega 64 | ZCOIN | SAMSUNG | 1220 | - | - | 0.818 | Default/Compute Heavy

RX Vega 56 | GRIN31| SAMSUNG | 1220 | 900 | - | 0.825 | Default/Cuckoo*
RX Vega 56 | GRIN31 | HYNIX | 1220 | 900 | - | 0.825 | Default/Cuckoo*
RX Vega 64 | GRIN31 | SAMSUNG | 1220 | 1025 | - | 0.832 | Default/Cuckoo*

RX Vega 56 | ETHASH | SAMSUNG | 965 | 960 | - | 0.818 | Default/Ethash*
RX Vega 56 | ETHASH | HYNIX | 950 | 940 | - | 0.818 | Default/Ethash*
RX Vega 64 | ETHASH | SAMSUNG | 1023 | 1075 | - | 0.850 | Default/Ethash*

RVN and RYO Low power.
RX Vega 56 | RVN/RYO | SAMSUNG | 1220 | - | - | 0.818 | High/Compute Heavy
RX Vega 56 | RVN/RYO | HYNIX | 1220 | - | - | 0.818 | High/Compute Heavy
RX Vega 64 | RVN/RYO | SAMSUNG | 1220 | - | - | 0.818 | High/Compute Heavy

RVN and RYO high performance.
RX Vega 56 | RVN/RYO | SAMSUNG | 1450 | - | - | 0.868 | High/Compute Heavy
RX Vega 56 | RVN/RYO | HYNIX | 1450 | - | - | 0.868 | High/Compute Heavy
RX Vega 64 | RVN/RYO | SAMSUNG | 1490 | - | - | 0.875 | High/Compute Heavy

*Note that you can always test medium and high tune factors on ethash and cuckoo agorithms, but for MTP we do not recommend using medium/high preset on Compute Heavy algorithm


Recommended miners for popular coins per platform:

NVIDIA:
Ethereum(ETH+ETC)  and forks -> ethminer by ethereum mining community(recommended by us), TT-Miner and gminer
GRIN29 -> gminer, nbminer and bminer
GRIN31 -> gminer, nbminer and bminer
BEAM -> gminer and miniZ
RVN -> t-rex and zenemy
ZCOIN -> TT-Miner(recommended by us), ccminer-mtp and t-rex


AMD:
Ethereum(ETH+ETC) and forks -> teamredminer(recommended by us) and ethminer
Cryptonote coins -> teamredminer(recommended by us), xmrig and xmr-stak.
GRIN29 -> teamredminer and lolMiner(both recommended by us)
GRIN31 -> teamredminer and lolMiner(both recommended by us)
BEAM -> lolMiner(recommended by us)
RVN -> teamredminer(recommended by us) and wildrig-multi
ZCOIN -> teamredminer(recommended by us), sgminer-fancyX and wildrig-multi

CPU:
Only suitable algorithm for now is RandomX which is currently supported on our platform by xmrig and xmr-stak-rx.
We support cpuminer-opt which has too many coins support but none of them is profitable by only CPU mining.

Disclamer: Some of recommended miners by us may not be the fastest but the developers behind them had proven trustworthy and we support them and their work.
Our personal recommendation should not be considered mandatory! You are free to use whatever miner you find best for your needs!


If you have found something better or more efficient, or performance wise, please do share your settings with us, we will really appreciate it!
Thank you!

# 11. December 2019 Update agent and dashboard

* Updated agent to 2.8.5
* Added smart tune for compute heavy algos on recent Intel CPUs (up to 30% increased performance on med/high)
* MMPOS: fixed powerlimit settings for AMD Vega56/64/FE
* MMPOS: improved watchdog to detect more AMD related issues
* MMPOS: added option to control HugePages settings via dashboard

# 18. December 2019 Update agent and dashboard

With this release we are rolling out our first iteration of redesigning the dashboard.

Our next plans are combining the rig info dialog and configuration and also making the Overclocking presets more accessable.

* Updated agent to 2.8.6
* Added smart tune for compute heavy algos on recent AMD CPUs
* Collecting and showing core + memory usage of GPUs and CPUs in dashboard
* WIN: Showing ASIC+Memory Temperature of AMD Vega+ cards on windows

# 23. December 2019 - MMP Stable release

* MMP 1 year anniversary update.
* We are releasing our first stable release, no longer public beta!
* Ubuntu 18.04-LTS based image will still be tagged as beta and is intended to replace our 16.04-LTS stable one.
* Added support for RX5700/5500(Navi ASICs) in stable variant.
* Updated kernel to 4.19.91 LTS.
* Added driver for BCU1525 in mmp-addin-drivers for enthusiasts.
* Updated Legacy NVIDIA driver to 390.132
* Added more checks for dpkg recovery.

Hi,

I flashed this into a 120GB SSD using Rufus and ended up with only about 10GB used and the other 110GB being un-allocated. Is there a way expand the OS into the remaining space?
I am looking to mine ETH on my Vegas and my understanding is that it benefits immensely from having large pages, hence why using the extra space would be nice.

Thank you.

Hello,
Linux does not need virtual swap space like windows. Regarding expanding its in ‘mmp help’ list - mmp expand via ssh.

Thank you. I managed to expand. I also tried "swap --add" but it seems it only creates swap file of 524.284 MB, is there a way to increase it? I would like to test if it makes any difference.

Thanks.

I can assure you it makes no difference in linux.

# 07. January 2020 - AMD Driver update

* Updated AMD driver to 5.2.5 in stable variant.
* Updated AMD driver to 5.2.6 in unstable variant.
* Increased stability on voltage starvation for Vega10, Vega20 and Navi ASICs.
* Fixed Hawaii powerplay warning in some cases.
* Fixed Polaris memory allocation in unstable variant ( May cause Polaris GPU to get stuck in weird cases ).

# 31. January 2020 - Dashboard update

* Added long awaited referral system!
* Refer your friends and you both get an additional 10% bonus credits on every credit purchase your referee makes.
* Referral system applies to already registered members and is limited to only inability of changing your already entered referral code and you can't refer yourself :)

12. February 2020
* * * Image and System Upgrades * * *
* Updated linux kernel to 4.19.98 for stable variant.
* Updated linux kernel to 4.19.101 for unstable variant.
* Updated AMD driver to 5.2.6 for stable variant.
* Updated NVIDIA driver to 440.44 for stable variant.
* Updated NVIDIA driver to 440.59 for unstable variant.
* Updated base to use lsb-release for future mmpOS 3.0 integration.

Stay tuned for today's agent update :)

# 12. February 2020 Update agent

This release improves Overclocking and Undervolting of AMD Navi cards and also added fan control for all aftermarket AMD Navi cards.

* Updated agent to 2.8.7
* Added AMD Navi10/12/14 memory voltage control
* Updated AMD Navi10/12/14 fan control, should now work on all cards
* Improved memory detection for all AMD cards from Vega and above
* Improved smart tune of supported NVIDIA cards and AMD Vega56 with Hynix memory
* Added detection of AMD RX 5600XT and RX 5500XT cards

# 29. February 2020 - System driver upgrades

* Updated linux kernel to 5.4.22 in unstable.
* Updated AMD driver to 5.4.4 in unstable variant.
* Updated NVIDIA driver to 440.64 in unstable variant.
* Updated linux kernel to 4.19.101 in stable variant.
* Updated AMD driver to 5.2.7 in stable variant.
* Updated NVIDIA driver to 440.59 in stable variant.
* Added timeout during rig registered check for faster startup.
* Introduced per GEO Location mirrors for updating drivers.
* Introduced per GEO Location apt repository mirrors.

We have added Folding @ Home as "miner", it is intended for fighting with COVID-19 decease by providing compute workloads for solving potential vaccine https://foldingathome.org/2020/02/27/foldinghome-takes-up-the-fight-against-covid-19-2019-ncov/ (https://foldingathome.org/2020/02/27/foldinghome-takes-up-the-fight-against-covid-19-2019-ncov/). When selected as coin[Folding at Home], set wallet name to none or something made up, same goes for pool, set hostname to non existing/non valid, it is not taken. If you have FaH passkey you can add it in advanced miner arguments[Miner profile] --passkey=yourpasskey .
!!! Warning !!!
All samples are downloaded in tmpfs so on reboots they do not persist, if you want to make it permanent - do not use usb drives and edit /opt/mmp/miners/foldingathome/mmp-stats.sh replacing storage="/run" with storage="/home" or some directory in non tmpfs.

This is not added for profit, so questions like "How do I get paid?" have simple answer - "You don't". You donate your compute resources for fighting not only with COVID-19 but other deadly deceases.
We will do everything we can to assist everyone who is willing to donate compute resources.
Stay safe, stay healthy, stay home and be responsible!

Feel free to join us on telegram or discord for more information.
https://discord.gg/P5J6Z5h and https://t.me/mmpos_intl

# 19. March 2020 Update agent and dashboard

* Updated agent to 2.8.8
* Agent now automatically adjusts timeouts to server based on connection time
* Notifications now display miner profile name on miner start/stop/restart
* Notifications now also display GPU Name+PCI-ID on low hashrate warnings

You The BEST !!!!

# 18. April 2020 Update agent and dashboard
This update added an advanced feature for users to specify their timings on vega cards manually.

We still recommend using low, medium or high smart tune, but now you can use custom tune too.

* Added Smart Tune custom, allowing your own timings for Vega 56/64/FE.
* Fixed Smart Tune for Vega with Hynix memory.

# 20. April 2020 Driver and kernel updates.

* Updated linux image to v2.8.15 - includes new kernel, AMD and NVIDIA driver.
* Updated NVIDIA driver to 440.82 in stable variant.
* Updated AMD driver to 5.4.15 in stable variant.
* Updated AMD driver to 5.4.16 in unstable variant.
* Updated linux kernel to 5.4.32 in stable variant.
* Some minor fixes and enhancements.
* Added new amdvbflash tool which can read and flash Navi(RX5500/5600/5700) bioses.

4Gen :)

https://i.imgur.com/GbKoCbY.jpg

https://i.imgur.com/evzLOBH.jpg

# 07. June 2020 Update agent and dashboard

Ever wanted to know why that one card performs better than the other? Maybe its due to being different vendor.
We now show the vendor (MSI, ASUS, Evga, Gigabyte...) too.

We also added support to set a fixed fan speed per rig or gpu, so you can optimize your temperatures and fanspeed even better.


* Updated agent to 2.8.10
* Added support for per rig or gpu fixed fan speed mode
* Added reporting of GPU vendor in cli and dashboard
* Improved startup with slow drivers

* Updated: AMD driver to 5.6.2 in unstable variant.
* Fixes: AMD RX 5500/XT compatibility in some cases.
* Fixes: Low hashrate on some RX 5600/XT models.
* Updated: AMD driver to 5.4.25 in stable variant.
* Fixes: 5600/XT stability issues.

Would 4GB RAM be enough for 4 GPUs (3 Vega 56 & one 64)? Thanks.

Hi, yes its enough even for more than 4 GPUs.

Thanks for your reply.

I have recently changed my motherboard since it died (ASROCK H81 PRO BTC) to ASUS EX-B250-V7 with 4GB of RAM. The newest BIOS is installed on the Asus and mining mode is enabled, and I am using it with 3 Vega 56's and one Vega 64. mmpOS only detects 2 or 3 of the cards, and if I keep switching them around it would sometimes detect the 4th one but when it starts mining it would crash in 15-30 minutes. I know this a long shot, but do you have any thoughts on things to try? I will probably install Windows and test with it soon.

More info:
-The card that is not detected is not always the same card, so it is not a problem with the cards themselves or the risers.
-A lot of people online complain that the red PCI-E port on the board causes problem, so I tried without connecting a card to it, but same problem.
-If I mine with the 3 cards mmpOS doesn't crash.

Hi,
mmpOS itself is linux and for a GPU to not get recognized is most likely misconfiguration in bios or pci early init problem. Try disabling fastboot and secureboot if any of these is enabled. Disable HD audio and set pcie speed to 2.0. Check if you have some legacy/uefi mix and set either all to legacy or all to uefi, make sure when using CSM to set "Other OS". These are the common issues that may cause this behaviour. I'd suggest joining discord/telegram channels for faster response and support.

mmpOS has been a solid work horse for the past year or so, it just works!

however earlier this month i started experiencing the same issue as reported by MSF99, disappearing cards, random cards. my initial thoughts was the cards are going bad on me. i have 6 580's all 8GB except one but it turned out it was the issue with phoenix miner and dag file creation was the issue. since version 5e it's been back to normal mostly.

Thanks!

# 01. July 2020 Update agent

This update now allows you to perform agent and other system updates over remote console. We moved remote console to a separate process and also optimized that the console session stays open, even on agent restarts.

* Updated agent to 2.8.11
* Optimized CPU detection
* Optimized AMD Smart Tune (Hynix+Samsung memory)
* Optimized AMD Vega+ fan management
* MMPOS: Moved remote-console to separate process
* Optimized mmp-base for faster boot process

# 04. August 2020 Update agent and dashboard

This update allows you to set a temperature target based on memory temperature for AMD Vega or later cards. So if either temperature target is reached fan management adjusts the fans.

We also added a loyalty level for all users, it's based on your usage of the platform. You will get up to 25% bonus credits for every credit purchase based on your current level.

* Updated agent to 2.8.11-1
* Added memory temp target for AMD Vega+ fan management
* Added loyalty level and bonus

not sure why but it seems like my rig is not updating to the new version. i am stuck on 2.8.10

is there any way to do this from a remote? i tried to do this on my own but failed  ::)

one other thing, i use phoenix miner and version 5.0e works perfect but having issue with 5.1 constant restarting and resetting and 100's of rejected shares. is it my settings or something has changed with 5.1


Thanks!

Hello,
Seems like rig wasn’t updated more than 6 months. Easiest way is to unplug usb drive and put it on your desktop, backup config.json from 20mb partition, write newest image which is on dashboard-> get mmpos. Once written just restore config.json you’ve backed up in new image and plug it back in rig. Regarding phoenixminer, I am not aware of what’s changed except looking into phoenixminer official changelog. If 5.0 works ok, just use it as its stable. There is no speed increase in new versions.
Cheers :)

Can I use MMPOS via wifi ? How I set up ?

Hi, yes you can. Only firstboot needs ethernet, after initial setup login via remote console/ssh/tty console and type mmp netconf, choose wifi, follow instructions to setup essid/wpa2.

25. September 2020 Update agent
Updated agent to 2.8.13.
Partially revert Navi OC sequence.
Fixes potential memory leak and hard lockup.
--
24. September 2020 Update agent and dashboard
This release presents complete overhauling of Navi(RX5500/5600/5700) overclocking experience. We are pleased to have increased stability and reduced as much as possible power usage.

Another voltage was introduced again for Navi series - SOC voltage. It is more advanced control over internal controller voltage. Please read disclaimer under the option in Worker configuration.

Updated agent to 2.8.12.
Added Navi SOC voltage with disclaimer of using it.
Added Vega56/64/Frontier MVDDCI voltage support.
Overhauled Navi OC procedures.
Fixed watchdog cli calling not sending notifications when triggered.
Added motherboard and bios information gathering.
--
11. September 2020 Update agent
Updated agent to 2.8.11-3
Fixes memory temperature target not working in case gpu temperature being too low.
--
25. August 2020 Update agent and dashboard
This update allows you to adjust memory controller voltage for AMD Navi(RX 5500/5600/5700) and AMD Polaris(RX 460/470/480/550/560/570/580/590).

Updated agent to 2.8.11-2
Added memory controller voltage for AMD Navi and Polaris.

Hello.

I've just download and flash the latest image of this OS but when I start my rig, I have this error :

https://i.imgur.com/C7zCW5x.png

So how can I get 2.8.13 image ??

EDIT : After contacting the team on Discord, I succeed in upgrading my client by opening a console on the miner and using the command "mmp update".

Hey guys.

I'm here cause I'm miner about 4 years and tested a lot of systems and settings. I judt met this system and I think that is a fantastic mining OS. I spended a lot of time to understand how it works but after that, it was spetacular. The main screen splited in 3 with all informations that we need was the most adorable thing.

Now, I have some tips to improve it. Like Simplemining OS, it could have a miner screen direct from dashboard, it will help a lot to see if  are there any problems right from the miner, without any teleconsole. Another tip is make the dashboard easier to change the OC settings without enter in another screen, at the smartphone it will be better.

Again, congrats for the wonderful job.

great OS!
highly recommend to enable BTC lightning payment. High TX on chain fee making small amount payment not reasonable

agree!

First off fantastic OS. mmpOS was so simple to setup my two rigs with seven total Vega 56's.

Now my question is there any way to remotely examine the log files on the rigs remotely?

I have looked everywhere on the miner management screen (Dashboard, Rigs, etc) but I cannot see any options to examine the actual logs on the rigs themselves.

telegramm Ru https://t.me/mmpos_slav

+1
It's very hard to diagnose which card is not stable if the system restarts randomly. Yes, you can SSH into it, but still. And watchdog.log location too :)

HiveOS which is what I was using before mmpOS allowed me to access the rig directly from the client screen. That was why I expected to see something similar with mmpOS.

I do have a SSH windows client so I will try to use that but I have a couple of questions.

1. How can I find the IP address of the rig I want to SSH into?
2. Is there a port number needed along with the IP address?
3. I assume that Rig Name and Password I used in creating the Rig is what I use to log in with
4. Any help in where I can find the various mmpOS logs is appreciated or any other info on the rig that is useful

On web dashboard...click RIGS
Select rig and should show info screen for rig with graphs of rig.
Click System tab for rig...local ip is local ip.

just ssh miner@(localip) bang you in....or just use the client through the web interface to pull up terminal on rig.
And user is miner...password is what you set

1- How to set timezone on server??? all timezones in linux has been set to UTC that makes all the things go wrong for my monitoring, and user "miner" is not root and I'll get lots of errors:
""Failed to set time zone: The name org.freedesktop.PolicyKit1 was not provided by any .service files""

so i cant change timezone or install any packages other than installed.

2- do we need to run anything for patching driver for moded bios?

3- the document for running advanced commands is very poor. actually not existed.

4- and very noob question, how to start my desired miners after configuring in dashboard?

https://t.me/mmpos_slav - Telegramm Channel

all russian

This os is very good os with lots of potentials. But it'll be much better if we could customize "miner" screen to our needs and color output on miner screen itself.
I think I'm gonna switch to mmpos myself.

Hi, you can use ESC + 1,2,3 to hide/show cli tool screens.

Awesome!
But please consider my other requests in your future updates

Great refresh on the dashboard. Much easier for overclocking and all the info is on one page!

How to mine multiple coins on the same rig? E.g. ETH with the 8GB cards and RVN with the 4GB cards?  ???
edit: Nevermind, found it in the FAQ  ::)

Sorry for disturbing,but i have problem add new rig,mmpos gives for new rig the same name as has my old rig and ethermyne gets crazy
and shows new rig hashrate only.Please help me how can i change new rig name? Thank you for help:)

Excuse me can anyone confirm if MMPOS supports LHR GPUs? Like 3070ti that only works with Nvidia driver 471.11 upward, is this driver available in MMPOS lastest update ?? Thanks

Hello, depending on miner sometimes you might need to add worker name, like t-rex for example requires adding --worker %rig_name%%miner_id% in advanced arguments or teamredminer --eth_worker=%rig_name%%miner_id%
Hostnames are set upon your ethernet hardware address, you are free to rename them in dashboard.

Yes, our latest image supports LHR gpus out of the box.

This is such an easy to use platform. Running it on a USB stick and got almost everything figured out in 10minutes. It's a nice change from HiveOS and Windows. The free credits are generous too. Just want to say thanks to the mmpOS team.

Is there a way to extract the reported hashrates besides ssh into the server and run "miner"? I want to do my monitoring.

How can I add a custom coin?