sponge
Newbie
Offline
Activity: 7
Merit: 0
|
|
May 29, 2019, 11:30:42 AM |
|
# 26. May 2019 Update agent
* Updated agent to 2.7.15 * Fix AMD auto dpm setting on non agent overclocked GPUs. * Fix disabled miner idle setting - now waits for miner to shutdown completely.
* Updated base to 2.7.40. * Added GPU recovery to be default disabled, remove your current /home/miner/settings.ini to activate the option. If you want to enable GPU recovery, set it to 0 in settings.ini
wher can i donwload latest image? im allready using software, but could not find newst version on backend
|
|
|
|
laik2 (OP)
|
|
May 29, 2019, 11:40:19 AM |
|
# 26. May 2019 Update agent
* Updated agent to 2.7.15 * Fix AMD auto dpm setting on non agent overclocked GPUs. * Fix disabled miner idle setting - now waits for miner to shutdown completely.
* Updated base to 2.7.40. * Added GPU recovery to be default disabled, remove your current /home/miner/settings.ini to activate the option. If you want to enable GPU recovery, set it to 0 in settings.ini
wher can i donwload latest image? im allready using software, but could not find newst version on backend Hi, to update system to latest agent either reboot it or login via ssh and type: mmp update ( confirm with Y ). To update system drivers to latest login via ssh and type: mmp update && mmp upgrade ( confirm both with Y ). Thats it, no need to reimage
|
|
|
|
sponge
Newbie
Offline
Activity: 7
Merit: 0
|
|
May 29, 2019, 11:54:43 AM |
|
# 26. May 2019 Update agent
* Updated agent to 2.7.15 * Fix AMD auto dpm setting on non agent overclocked GPUs. * Fix disabled miner idle setting - now waits for miner to shutdown completely.
* Updated base to 2.7.40. * Added GPU recovery to be default disabled, remove your current /home/miner/settings.ini to activate the option. If you want to enable GPU recovery, set it to 0 in settings.ini
wher can i donwload latest image? im allready using software, but could not find newst version on backend Hi, to update system to latest agent either reboot it or login via ssh and type: mmp update ( confirm with Y ). To update system drivers to latest login via ssh and type: mmp update && mmp upgrade ( confirm both with Y ). Thats it, no need to reimage Hmm... i have 10x vega rigs on you system. Slowly adding more. But im little noob How is the easyest way to get the IP-s to login in via putty? Login info is what? For me, it says all my rigs are not up to date. just restart wont help i quess.
|
|
|
|
laik2 (OP)
|
|
May 29, 2019, 12:38:35 PM |
|
Click on rig -> system -> Local IP Address There is your local IP to which you can connect, simple reboot will update agent, amdgpu firmware, extras and base. Drivers require manual cli interaction to complete.
|
|
|
|
laik2 (OP)
|
|
June 09, 2019, 06:23:50 AM |
|
# 09. June 2019 - Update amdgpu driver and opencl for unstable variant
* Updated amdgpu driver to 3.32.0 for unstable variant. * Updated amdgpu rocm opencl to 2.5(25.00) for unstable variant. * Fixed nvidia package with missing libGLdispatch lib. * Added user miner to video group for user opencl related tests. * Fixed issue with mmp expand command not working in some cases.
|
|
|
|
Heardalis
|
|
June 09, 2019, 03:16:16 PM |
|
Today i try the OS with this settings :
6x Asus-P106-100 6 gb Samsung Gpus. The system was working fine @windows 10 with Claymore 14+ on ETH . ( the OC settings r Core:+175, Memory +750 @75 watt )
On MMPOS it was not able to get it stable ( on Linux its memory +1500 ) . İ try it with and without the smart tune .
So i lower the memory to +1350 ( on winsux its +675) was also not stable . Then i try to lower the core to +150 with memory +1350 . still not stable on every smart tune mode .
Maybe i did somthing wrong maybe its the driver . ( i use the old cuda 10 drivers on winsux . 418+)
İ try it also with more juce ( 80 watt ) but still not stable for me .
Also try it with the phoenix miner but same ....
|
|
|
|
laik2 (OP)
|
|
June 09, 2019, 05:56:36 PM |
|
P106-100 work on P0 state by default, not sure how you get stable +750 on windows...its kinda pushing to the edge. Micron stable settings for me were +75/+900(+450 windows), samsung +75/+1300(+650) , hynix +75/+1100(+550). All these were on powerlimit of 80W.
|
|
|
|
GingerAle
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
June 16, 2019, 01:33:44 AM |
|
how do you actually update the softwarE? the web portal says i need to update, but i can't find the config and the helpme in the console don't have it.
|
|
|
|
laik2 (OP)
|
|
June 16, 2019, 08:18:57 AM |
|
how do you actually update the softwarE? the web portal says i need to update, but i can't find the config and the helpme in the console don't have it.
Two ways actually, one is ‘mmp update’ which will update repository based pckages and second is ‘mmp upgrade’ which will upgrade system drivers as specified for your system variant.
|
|
|
|
oldtminer
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 16, 2019, 04:48:46 PM |
|
my first post here on this forum but a long time reader, been using mmpOS for about a month now and i am super happy with how stable it is! just set it and forget it. Thanks!
|
|
|
|
laik2 (OP)
|
|
June 17, 2019, 03:38:50 PM |
|
# 17. June 2019 - Base partial rewrite and OpenCL lib update for unstable
* Update mmp-base. `mmp update` and `mmp upgrade` are now smarter. System updates are now a bit faster due to less loops executed. Driver upgrades now only trigger if there are actual available upgrades. In case of available driver update you will be asked to confirm actual upgrade process. System will automatically restart only on kernel change. After successful driver upgrade you will now be asked to reboot, not forced. * Added `mmp sysinfo` option which exports running and latest versions for 3rd party integrations. * Various small fixes and cleanups. * Updated OpenCL to 19.20 for unstable variant
|
|
|
|
Rakly3
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 18, 2019, 06:53:23 PM |
|
With great power comes great OS!
|
|
|
|
laik2 (OP)
|
|
June 19, 2019, 11:51:11 AM |
|
# 19. June 2019 Update agent + dashboard
This update is in preparation of full FPGA support, we are starting with SQRL Acorn's. It currently only displays basic information, but we are working hard on multiple miner support, which enables us to allows us to show hashrate of acorns too.
This release is also the first public Windows agent version. We plan to release agent updates for windows and mmpOS (linux) together.
* Updated agent to 2.7.16 * Fixed AMD Radeon VII overclocking in some cases * Added memory detection for AMD Radeon VII * Improved SmartTune for AMD Vega with hynix memory * Added support for basic details display of Acorn FPGA in agent and dashboard
|
|
|
|
laik2 (OP)
|
|
June 22, 2019, 08:02:09 PM Last edit: June 26, 2019, 09:23:24 AM by laik2 |
|
I'm having issues witih mmpos mining Swap with GrinProMiner for AMD - is anyone using this setup with success?
The error I get is "wrong hash or very old" for the Swap Micropool but I'm also not getting shares on HeroMiners pool either.
Does mmpos support Swap on AMD?
Hi, we support the miner but there is no actual option to switch to XWP, according to devs it should switch automatically. EDIT: Fixed support for GrinPro, with their attempt to fix miner for another mining distro, they broke our support.
|
|
|
|
laik2 (OP)
|
|
June 26, 2019, 09:23:57 AM |
|
Added mmp-addin-drivers package to latest base 2.7.54. For now it only adds support for Tplink archer t4u (rtl8812au) usb wifi. If you come up with unsupported device, please let us know so we can add it to this package. Thank you!
|
|
|
|
laik2 (OP)
|
|
June 28, 2019, 10:30:36 AM |
|
27. June 2019 - Added NVME support for reimage and expand
Update mmp-base. Added `mmp register YOUR-RIG-CODE` command as final option if dashboard or autoconf.txt failed. Added support for NVME devices in reimage and expand commands for mmp cli. Added support for 3rd party drivers via package mmp-addin-drivers. Updated linux kernel to 4.19.56 for unstable variant Possible fix for amdgpu and H81/H110 chipsets in unstable variant.
|
|
|
|
Rakly3
Newbie
Offline
Activity: 45
Merit: 0
|
|
July 01, 2019, 10:04:02 AM Last edit: July 01, 2019, 11:41:30 AM by Rakly3 |
|
|
|
|
|
5BTC
Copper Member
Newbie
Offline
Activity: 48
Merit: 0
|
|
July 06, 2019, 07:50:05 PM |
|
What happened on July 3 update? Power usage just spiked quite a bit. Didn’t make any changes at all to the rigs recently
|
|
|
|
laik2 (OP)
|
|
July 06, 2019, 07:56:53 PM |
|
There weren’t any updates on agent side for July yet.
|
|
|
|
laik2 (OP)
|
|
July 08, 2019, 04:43:31 PM |
|
# 08. July 2019 Update agent
* Updated agent to 2.7.17 * Added support for per GPU invalid shares in Ethminer, TT-Miner, Claymore and Phoenix miner * Prepared geolocated download locations for miners (higher download speed from non EU countries)
|
|
|
|
|