Bitcoin Forum

Good afternoon. My mine works for a few hours in this pool.
But my wallet has not even received 10 coins. Can I check my mine works right?
My address : 16617998205507466145
My wallet : BURST-MWX3-CBQP-C7Q2-GXR9F
My steps:
1)Launch burst_1.0.3/run.bat
2) go to Burst_wallet site
3) Launch burst-pool-miner/run_mine.bat
C:\Windows\SysWOW64\java -Xmx1024m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner mine http://burst-pool.cryptoport.io


http://s017.radikal.ru/i425/1409/ca/59b791d54142.png

It works in a few hours.
But sometimes there's this error. After them my mine works fine?
http://s019.radikal.ru/i601/1409/5e/3e962d7a3189.png

Mine does this too. What does it mean?

How does the reward system work? I see some balances in the all round share. When are these balances paid out?

Is it possible to mine on pool while i'm generating a plot?
last 2 day in solo --> 0 blocks!!!
so i want to tray setting up pool!!!

another question.
when i set up "Set reward recipient:Passphrase" and "Set reward recipient:Recipient:" on http://127.0.0.1:8125/rewardassignment.html, how i can reset it, if i want to return on solo mining?

thanks!

its not balance, its share value

share value will be converted into burst payout when pool has positive balance
so you will get  (YOUR_SHARE_VALUE / TOTAL_SHARE_VALUE) x PAYMENT_FUND
PAYMEND_FUND is depend on pool balance and their block allocation fund

edit: I can see my wallet on the pool transactions now.  So I guess it is working!




Uray--can you help me with connecting to your pool?  I submitted the address relocation and waited four+ rounds.

Here is my run_mine.bat:

C:\Windows\SysWOW64\java -Xmx750m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner mine "http://burst-pool.cryptoport.io:80"%*


If I use the stock one you included then it just crashes, but with this one I am getting occasional "Unable to get mining info from wallet," while it appears to be mining at other times.

My account and address are 1409859585678 / LU4T-RXBX-SF69-EBVWT, but not seeing either show up on the pool.

Am I mining and connected?  If not, what do I need to change in the run_mine.bat?

Thanks!

I am getting quite a few "Failed to submit share" readouts.  Afterward I appear to lose the share that I was attempting to submit.

Why is this happening? It seems like it results in quite a few shares never making it to the pool.

java -Xmx750m -cp pocminer.jar:lib/*:lib/akka/*:lib/jetty/* pocminer.POCMiner mine "http://burst-pool.cryptoport.io"

which command line are you using?

on linux and osx, i just doing this :

without that %* i dont know what is that on windows

java -Xmx750m -cp pocminer.jar:lib/*:lib/akka/*:lib/jetty/* pocminer.POCMiner mine "http://burst-pool.cryptoport.io:8124"

unfortunately i dont have windows machine here, but the one I included is running fine on osx and linux.

maybe you can post me any crash message?

occasional "Unable to get mining info from wallet," is ok it maybe the server is full at that time

Is this helpful?  Notice the two "failed to submit nonce" then it goes back to submitting again.

http://s30.postimg.org/z7kbkcq3h/failed_to_submit_nonce.jpg (http://postimg.org/image/z7kbkcq3h/)

{"errorCode":5,"errorDescription":"Unknown account"}

have you send reward assignment transaction for the pool ?

how do explain to me

how do explain to me

Thanks!  That appears to have solved it on my three miners.  At least it is not occurring anywhere near the frequency that it was as I submitted the last ~30 shares without incident.

I would recommend you change your setup instructions to have Windows users default to using :8124.

edit: Definitely helped!  I am now getting about significantly higher payouts.

ok, thanks for feedback

have you read and follow this : http://burst-pool.cryptoport.io/howto.html

Also, have you considered having a minimum payout before sending?  Based on how often I am receiving payouts versus their size, it looks like you could save a non-trivial amount in transaction fees over the course of 24 hours.

I did this and gave the same error
{"error Code": 5, "Error Description": "Unknown account"}

yes i have plan on it, miner can set their minimum payout from their client
or maybe in the mean time i should increase minimum payout? if yes how much is reasonable ?

whats your account? can you see your account on block explorer -> http://burst.cryptoport.io ?

my account
BURST-3N39-7T5J-CKPM-DLLBP

your account is not yet visible on network --> http://burst.cryptoport.io/acc/BURST-3N39-7T5J-CKPM-DLLBP

you need atleast make one outgoing transaction to make your account visible to network, you buy alias, or send somewhere 1 burst

send me one burst :)

sent

Friend thank you I think now it worked :)

Friend is giving this error
Error: Unable to get info from minig wallet

edit mine.bat
C:\Windows\SysWOW64\java -Xmx1024m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner mine http://burst-pool.cryptoport.io

Verified. Works. Payments go to the pool.

My account isn't visible on the network yet and I would like to mine on this pool could someone please send me 1 burst, thanks!
BURST-6YJF-EG3F-ZMML-8BFUV

sent 5

{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}
{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}
New best: 13991743533807458994:127332
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Submitting share
Error: Failed to submit nonce
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
Error: Unable to get mining info from wallet :http://burst-pool.cryptoport.io:80/burst?requestType=getMiningInfo
{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}
{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}
{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}
{"baseTarget":"8668149","height":"9029","generationSignature":"c7b1e81b651378e7524a61259c60439057fdde699504538460ca8bc33135cc74"}

Well shoot, my "Failed to submit nonce" error is back =/

Any ideas on what I could do?  Do you think is related to my router somehow?

"Error: Failed to submit nonce"
What is happening and how do I fix it?
Pool shows that I have no valid shares....

ok here is the update for http://burst-pool.cryptoport.io

I hope recent problem of "failed to get mining info from wallet" and error while "submiting nonce" is reduced, it seems that java wallet can't handle spamming of submitNonce from hundreds miners at the same time, so I ended up running 4 wallet in round-robin.

for confusion about not getting paid, everything is OK, i did check it, and for more information that currently pool minimum payout is 250 BURST, that is you will get payment to your wallet when your balance on pool reach 250 BURST, you can see your balance on right-most column on "Current Round Shares" panel

ok its confusing to look at the UI, I will make an improvement.

and if you dont see your balance, or your balance is '--', that is your balance is zero, zero balance sometime means that your share is not converted to burst balance yet, so you should check how much share credit you own on second rightmost column both on "Current Round Shares" and "All Round Shares" panel.

your shares will be converted into burst balance when pool has positive balance, after conversion if your burst balance is more than 250, then you will get paid, if not, your burst will deposited to your pool balance and your shares credit will be zero (as it already converted into burst)

some important to note here that your share credit is always reducing every block, there are share expiration of 50% every block, this is to give most recent shares a higher value than the shares that have lesser contribution in block found round.

but your burst balance is never reduced, so if your share is already converted to burst you are safe just wait until it reach more than 250 burst. more shares will be converted into burst if pool found blocks more often, everytime we found a block, all existing shares will be converted to burst.

Great!  Thanks for looking into the submitNonce issue.  I am back on your server now and it looks like the issue is better, but I still see occasional failures. 

Perhaps you could set a high limit on deadlines to reduce the load further?  Even something like 500,000 would help considerably, wouldn't it?  Even 1,000,000 limit on deadline would help and those shares are only worth ~3 BURST.

PS.  I love your GUI!  I hope you do not change it too much ;)

the problem is, miner only submit nonce and accountid to pool
and pool's wallet calculate how much is the deadline based on his nonce and accountId, these calculation is heavy if we have hundreds at the same time

the difference with official pool (the one dev used) is on dev's pool these calculation is done on miner side, and miner only submit their nonce if deadline is within limit, but the downside is on official pool you need to run wallet locally, while on me, you just need to run miner without wallet running is ok.

Would anyone happen to know why I keep getting "Error reading file: xxxxxxx", "Unable to get mining info from wallet" and "failed to submit" on this pool.

I've been banging my head the past day getting this all setup. I'm about to give up. Maybe this isn't for me.

Just so I'm understanding this right (this is everything I did):

1) I run the BURST bat from my pocminer folder to setup my server

2) I sent the 1 BURST to the account in the howto (I don't know what the hell 4 block means)

3) I setup the run_generate and run_mine like I do as I'm solo mining

 - - - this is where I get confused

4) Do I run run_generate from my OLD pocminer folder or run it from the pool miner?

5) What in the hell is generating plot and do I need to move my SOLO plots to the miner like I did? I had 4 plots in there ranging from 13GB to nothing. I don't know what generating a plot is, but I have a few in there. I want to utilize my whole 2.7TB if possible

6) I run run_mine from the pool folder.

I'm so confused at this point. Some shit I run from other folders than the pool folder. I don't know why I have to generate plot outside of the pool folder. I don't know why I keep getting errors. I'm on the verge of quitting. . .

Java Miner Update

if you are using java miner, please update your miner : https://s3-ap-southeast-1.amazonaws.com/burst-mirror/burst-pool-miner-r2.zip
this will improve "Failed to submit nonce" and MiningInfo error

Hi uray

What happen if i still don't have a chance to update your miner.... Will your previous miner still work ?

my id BURST-P6ZR-UMNC-P42F-8GRH5

set recipient address to your own account, or any account you want to pay them when you found a block

yes you can mining while generating plot, there will be some error message though, but you can ignore them if you know you are still in progress of plotting

Java Miner Update

if you are using java miner, please update your miner : https://s3-ap-southeast-1.amazonaws.com/burst-mirror/burst-pool-miner-r2.zip
this will improve "Failed to submit nonce" and MiningInfo error

the port is necessary to set? some users didn't set it

I think it had to be set to 80 if there were firewall issues only.

the miner come without the port, i've added it manually, this is why i'm asking

Then wouldn't it be 8124?

The new version of the miner is working quite well without specifying a port (for me at least).

the miner come without the port, i've added it manually, this is why i'm asking

Why has my "All Round Shares" dropped. It was around 2.5 earlier and now it's down to 0.9. I thought if anything that should be going up. I swear I'm fucking this up somehow.

Would love if someone could send me a couple coins so I can join a pool, as mining solo hasn't proved to be very effective.

BURST-ERZ5-6V78-EXCP-2UKQT

@uray  please make a separate chat-window

i've seen on pool we have nonce spammer, who ever doing this it has no use since pool will always pick your best deadline, not add up all your submitted nonce, and also submiting nonce that has higher deadline than your current best deadline will incur penalty to your share as it will flood the network with garbage data

Why do fuckers have to try and game the system? It gets old ya know. Just ban them and be done with it.

uray, i ask it here also, your miner sucks  too many gb of ram when submitting shares, i have filled 2tb and i'm using 6.7gb when submitting, this is crazy

the java miner? or C miner?, which miner is it?
i am not sure why, because what i did is just modify "SubmitNonce" network data to original java POCMiner and to C miner from dcct

i've seen on pool we have nonce spammer, who ever doing this it has no use since pool will always pick your best deadline, not add up all your submitted nonce, and also submiting nonce that has higher deadline than your current best deadline will incur penalty to your share as it will flood the network with garbage data

Is it possible to use two different systems with the same account? lets say i generate 20 plot files (without overlapping), would it make sense to us 10 files on one system, and 10 on the other? can the pool handle that (shares from the same ip)? or should I use two different accounts?

Is it possible to use two different systems with the same account? lets say i generate 20 plot files (without overlapping), would it make sense to us 10 files on one system, and 10 on the other? can the pool handle that (shares from the same ip)? or should I use two different accounts?

uray , can u do a auto payout for those remain below 250 burst after 24 hours ? Or some sort of auto payout for those with left over coin on pool. Or u gonna keep those coin for yourself ? I believe some of the account are inactive and their coin don't reach 250 anytime soon.

ok i will make auto-payout soon, and for those who have balance less than 1 burst, i will collect them send them to faucet address, should we do it weekly or ?

Per 24 hours ? Weekly is too long for crypto. Only need to clear those account inactive with less than 250 burst. Once u clear them there wouldnt be anything to clear. So it's sort of one time off for most account. Running the auto payout should be fast because u are only clearing inactive account which only represent less than 50% on the pool ? Those who are inactive could be no longer mining , or left for other pool , or left for solo. Clearing their payout within 24-48 hours would be good.

Is there any Problem with the pool atm? I see block 9631 on pool but in network is block 10395 newest.

if you are using java miner, please update your miner : https://s3-ap-southeast-1.amazonaws.com/burst-mirror/burst-pool-miner-r2.zip
this will improve "Failed to submit nonce" and MiningInfo error

i cant get on the poolsite anymore!

from my mobile internet it works... but not with homeinternet.. all other sites no problem to load

I also get constant errors. maybe it's a good idea to limit the deadlines a little (700years+ just don't make sense). I think 10,000,000 would be ok. That should result in much traffic. but maybe the problem today is caused by something else?

uray
whe you do some maintenance on pool, i need to restart miner to continue mining burst?

or you do maintenance, and i leave pool miner up and running, and a have no issue?

i think the second behaviour is better... but i don't know if it is correct!

thanks

guys burst-pool.cryptoport.io is going to explode !
we got 300+ miners at http://burst-pool.cryptoport.io, network traffic is huge, if we continue like this, more and more nonce submissions are going to be failed due to network lag.

please use alternate pool if you can, and spread the hash power and network trafic, this is completely separate pool, so you need to re-do reward assignment transaction to this pool address, please follow the How-To (http://burst-pool2.cryptoport.io/howto.html) on site

alternate pool : http://burst-pool2.cryptoport.io

set your reward assignment to 16434009311448803259 (BURST-WBXV-ER87-3JCG-GNC6A)

mining URL :
or

can you try host server in the EU maybe?  I would myself if I knew how to setup a pool.. or if u want to help me setup I can get hosting and all, up 2 u.

currently looks like first pool is in US and second in Singapore.. I dont want to mine on first pool because of network overload but to second one I have 500ms+.. too much..

Uray can you give me an answer?
Thanks

I can also host copy of your pool in EU. If you can share howto to setup burst-pool.

yeah burst-pool3 will be in eu, but i am broke dont have money yet currently, please wait a moment until i can pay for VPS

anyway ping time for burst mining is doesn't matter unless you got deadline less than a second, its unlike gpu mining we are not in race for nonce submission here, but in race for best nonce

i dont really understand the question, but if did maintenance, mining will be down and will continue automatically after the pool is up, you dont need to restart your miner

that limit is must be on client, pool cant limit the nonce submission based on deadline value, pool only know how much the deadline is after client send the nonce and then pool calculate the deadline based on that nonce, so limiting deadline on pool does not have any effect on network traffic or computation in pool

Friend thank you I think now it worked :)

And would an SSD mine faster than a regular hard drive?

And would an SSD mine faster than a regular hard drive?

How is this possible ?

http://burst.cryptoport.io/acc/3871937959129835113

Account created and join pool 2 in less than 4 hours payout 9,650 burst ? Not a single block was found by this account. I have observe this account for many blocks and the deadline submitted is in days or months all the time. Someone submitting fake share to get coin ?

good question yellow!!!

uray wath about this observation?

burst-pool2.cryptoport.io  now also has too many miners....

Error: Failed to submit nonce, retrying...
New best: Error: Failed to submit nonce, retrying..

I am losing coins because my shares are not being accepted and im very sure the pool just missed a block because of it

total 157 miners..

What is it that is causing this?? is it the bandwidth or the computing power behind it that cannot keep up???

this is why this pools payout is so bad compared to the devs pool... no minimum deadline is terrible if the hardware sucks and cannot keep up..




plz dont come with something like it doesnt matter if its not instant.. because it can keep retrying for minutes until a new block is found then it all resets and keep retrying.....

+1

Error: Failed to submit nonce, retrying...
Error: Failed to submit nonce

Dead.

+1

Error: Failed to submit nonce, retrying...
Error: Failed to submit nonce

Dead.

same problem.I switch to solo now.

oh okay and how do I start mining because I get this every time I try to add the recipient

{"errorCode":5,"errorDescription":"Unknown account"}

Wallet is BURST-ZHZ7-DBSR-E5TH-CYKHP and I cant find it on the cryptoport website

Can someone please help me :( ?

Why dev don't give support?
He disapper for 2 days till now.

Why he set-up a pool if then could not give 10 minute a day to check?

I have no idea why but when I try to mine it says "Passphrase does not match reward address" any ideas?

Why dev don't give support?
He disapper for 2 days till now.

Why he set-up a pool if then could not give 10 minute a day to check?

sorry i've been very very very busy working on pool
here what i've done :

1. replaced back-end from java to c++ to calculate nonce deadline, its should be faster and handle better load right now
2. fixed some bugs
3. updated wallet back-end to 1.1.1
4. updgraded hardware
    http://burst-pool.cryptoport.io (http://burst-pool.cryptoport.io) (US) 16 core xeon, 24GB Mem,  3.0% pool fee (from 4core, 8GB, 1.5% fee)
    http://burst-pool2.cryptoport.io (http://burst-pool2.cryptoport.io) (SG) 8 core xeon, 16GB Mem, 2.0% pool fee (from 4core, 8GB, 1.5% fee)

burst-pool (US) is moved from google cloud (US) to amazon EC2 (US) since google has weird issue with their firewall, i can't even access my own web from here, and i need to make slight adjustment to pool fee to cover running cost.

sorry i've been very very very busy working on pool
here what i've done :

1. replaced back-end from java to c++ to calculate nonce deadline, its should be faster and handle better load right now
2. fixed some bugs
3. updated wallet back-end to 1.1.1
4. updgraded hardware
    http://burst-pool.cryptoport.io (http://burst-pool.cryptoport.io) (US) 16 core xeon, 24GB Mem,  3.0% pool fee (from 4core, 8GB, 1.5% fee)
    http://burst-pool2.cryptoport.io (http://burst-pool2.cryptoport.io) (SG) 8 core xeon, 16GB Mem, 2.0% pool fee (from 4core, 8GB, 1.5% fee)

burst-pool (US) is moved from google cloud (US) to amazon EC2 (US) since google has weird issue with their firewall, i can't even access my own web from here, and i need to make slight adjustment to pool fee to cover running cost.

both pools updated to 1.1.2

after the upgrade i dont get fail submit anymore

very stable now

good job

after the upgrade i dont get fail submit anymore

very stable now

good job

wow I accidentally blocked port 8124, thats why its running very smooth, because half of the miners are blocked LOL
i dunno how about now, seems some miners still got nonce submission reject, but its far less

you must set reward address to pool address as described.
pool1 and pool2 has different addresses.

Could somebody send me some burst

BURST-SLHG-PCZ5-3S5N-G7LGL

Wanna mine but no visible account

I sent you 50 BURST. I know its not much but way more than you need to get started.

Thanks a lot, after mining someone I send back :-)

C Miner Update (dcct)

if you are using c miner for linux, please update your miner : https://s3-ap-southeast-1.amazonaws.com/burst-mirror/dcct-pool-miner-r2.tgz
this basically remove deadline limit and add socket timeout on nonce submission

Is http://burst-pool2.cryptoport.io/ having problems with accepting shares?
I am getting following message from burst-pool-miner:

Submitting Share
Error: Failed to submit nonce, retrying...
Error: Failed to submit nonce.

 :-\

Uray--can you perhaps change how rewards are allocated?  Reduce or eliminate payouts to extremely high deadlines and increase payout sharply for shares that actually have a chance of finding a block.



After this latest set of difficulty increases, those who submit potentially winning deadlines, or even find a block, can receive very very low payouts.

I found a block for the pool and received less than 300 BURST for it.  That is absurdly low.




edit: have not gotten a payout for 8 hours now on both pools.

in the mean time, i have developed new client (miner) for this pool
its here : https://github.com/uraymeiviar/burst-miner/releases/tag/1.0

its native (c++) for win, osx and linux, all binaries  and source available there
it will reduce pool load, and increase reliability for submiting shares, please test it

Thanks for the development!

I took a look at the config and changed to my plot location, but even before doing that when I run the .exe it just flashes briefly on the screen and quits.

I am on Win7 64-bit.  What can I do to see the error?


http://s13.postimg.org/6412fwkwj/dependency_walker.jpg (http://postimg.org/image/6412fwkwj/)

Hi,
I just try new C++ miner And can ask you is this correct function?
http://s28.postimg.org/s89t2u7hl/screenshot.jpg (http://postimg.org/image/s89t2u7hl/)
Note: W7 64-bit, 950 GB generated with GPU

btw: I minig on burst pool v2 since Tuesday , but havent receive any payout

with New Native C++ Miner Update 1.0 R3 for some plots I get following info, e.g.

plot read done. acc#_4000001_80000_80000 0 nonces

is this actually ok or are these plots fckd up?  :-\

are you mining while generating plot? or generating is done?
a while ago, i did mining while generating it shows 0 nonce, and then i restart the miner, then it read the nonces, and then its no problem generating while mining.
and also check if the miner has read access to the file, maybe try with administrator priviledge first

it seems your plots is fucked up, because pool's deadline is different than locally calculated deadline

Yae, I delete them and now genereating new with CPU.But when I run new C miner twice (on different PC but 1 address) I see in miners diffrent confirmed deadline and on pool also see different deadline , its correct(sometimes its same)? or its better use for one miner one address?. And please can you tell me what is means the last number(third, also someone have there dashes) in current round shares?

<account-RS> <current round best deadline> <current-share-value> <burst-balance>

<account-RS> <all round-best-deadline> <all round share value> [<number of blocks since last payment>]

uray, your new miner is nice, but uses a huge amount of RAM. Normal? Is there any way to limit usage?

https://i.imgur.com/HT9Q9js.png

use small stagger size 4096 or 8192

your pool fails every day

Block 9824 ?

New Native C++ Miner Update 1.1 R4

binaries and source available here : https://github.com/uraymeiviar/burst-miner/releases
for osx, linux64 and win64

• capable to read large stagger plot, with manual limit option on memory usage
• Fix thread race condition, which reported to less nonce read
• add option of buffer size (MB) in mining.conf to limit memory usage

My account isn't visible on the network yet and I would like to mine on this pool could someone please send me 1 burst, thanks!

BURST-58CT-89R9-WFQ6-DPRG3

I am also missing payouts, something is wrong. I mean I get some burst, but those are for peanuts, 8tb getting like 500 burst a day.

what is your peanut account? and your non-peanut account?

I have a walnut account. Can u help ?

my account is coconut  8)

what is your peanut account? and your non-peanut account?

http://burst.cryptoport.io/acc/3000267896029333778


I .like you sense for humor, but I am not laughing.

this one is the 8TB or the missing payout?

I just found machine with stopped miner, look like miner crashed. But still, it should be higher payment.
Before I had 4tb and payments look ok. Yes, I have no other address.

Here are my plot files:
3000267896029333778_0_2000000_2000000
3000267896029333778_10000000_2000000_2000000
3000267896029333778_2000000_2000000_2000000
3000267896029333778_4000000_2000000_2000000
3000267896029333778_8000000_2000000_4000
3000267896029333778_6000000_2000000_4000
3000267896029333778_5500000_252000_4000
3000267896029333778_5200000_2000000_4000
3000267896029333778_5400000_1000000_4000
3000267896029333778_4800000_2000000_4000
3000267896029333778_5000000_2000000_4000
3000267896029333778_4400000_2000000_4000
3000267896029333778_4600000_2000000_4000
3000267896029333778_4000000_2000000_4000
3000267896029333778_4200000_2000000_4000

I started optimizing them, not all finished.

Holly shit, I just realized... Oh what a mistake. nooooo.......    Sorry for bothering Uray.

I have a question. Suppose I have reward-assignment done on US pool first & SG pool last, if I want to switch back to US pool should I assign my ID again or because it has already been assigned there is no need to do it again ?

you should do assignment again, only the last assignment is in effect

Umm, those two graphs are the same :s

you got the idea that the planned graph for EU pool is actually the red line, right?  8)

Yeah thanks for that, how could I not realise -.-


Maybe I should make myself clearer for the sarcastic folk.

The curve on the US pool graph is the same as the curve on the SG pool graph.

(That's the black line in the top graph and the black line in the middle graph Pilotseye 8) )

hmm... how is its same? US and SG right? can you please see it again?

hmm... how is its same? US and SG right? can you please see it again?

Another thing I don't understand is why the "Balance" column sometimes reset without being paid.
From what I see in the "How it works" page, the 50% reduction applies to shares :

"Share value reduction is 50% per block
if pool on current round does not find a block, miners shares are keep (up to 99 blocks), but their value is reduced by 50% everytime we dont found a block. when pool has positive balance, all share are summed up to block# where payment will be made, and burst payment are made proportional to total share owned up to this time"

The balance in my understandig is supposed to be left untouched till it reach or exceed the minimum payout and then reset after the payment is been issued. Is that wrong?

Again, thanks to shed some light

This is a repost from the other thread:

I need some insight on the mining process.
I am currently on Uray's pool. Started mining this morning with a balance of 21 Burst. Mined for 4ish hours, had 40+ shares, found a block and only gained 1 Burst.
What am I missing here? I have 1.75 TB in plots which should be around 40/hour per the calculator.

Edit: At block 18303 I went from a balance of 22 to 7 after finding block 18302.

those words not saying anything about balance, its share value, its completely different, balance is untouched until it exceed minimum payout, then your balance will be zero and you will got payment

nonce -> deadline -> CR. share value -> AR. share value -> balance -> payout

I've said the same thing :)
Anyway, the balance column keep reset itself, maybe is just a display glitch and behind the curtains everything work fine....

What about the blocks I've found? Wasn't I supposed to get an higher share? And while it's true that the shares keep halving every time the pool doesn't find a block, in this case (ie block found) the pool wasn't supposed to have a positive balance? The same happened today, block found and no different payout.

Thank you very much for your time

p.s. sorry for my poor English

I hate to be a broken record but it happened again.
At block 18702 I had a balance of 214, at block 18703 it went to 0.
I have received no payout as of block 18707.

So it reset from 90 to 0 on Tuesday and 40 to 0 yesterday.
Can you look into this please?
Account: G7L5-JW6T-TKKM-9MNNL

Edit: the 214 just showed up.

Could not get mining info from Node. Will retry..             
2834 MB read/11338 GB total/deadline 231351s (231280s left)             
New block 18712, basetarget 2418526                         

Could not get mining info from Node. Will retry..             
4827 MB read/19311 GB total/deadline 137651s (137459s left)           
New block 18713, basetarget 2381672

Hi uray,
how can I get rid of that ''Could not get mining info from Node. Will retry..'' message.
I hope I'm submitting shares.

so.. your 214 are gone or what?

hello guys I managed to register through this pool and when I run my miner I got this error

[ERROR][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] null
[WARN][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] Changing Resume into Create after akka.actor.ActorInitializationException: exception during creation


can you guys help me and tell me what went wrong on my setting or procedures, TIA

Burstcoin.io Pool Update

[ Planned Downtime due to Maintenance ]

I made some optimization on software side, so it will check nonce deadline faster. in exchange to reduce pools running cost, server performance need to be tuned down a little bit, therefor I need to make hardware adjustment to all running pool [ US (http://pool.burstcoin.io) , SG (http://pool2.burstcoin.io) , EU (http://pool3.burstcoin.io) ]

due to this adjustment, i need to shutdown all the pools for couple of blocktime (10-15 minutes), and server public IP might change because of hardware migration, so there is chance that you need to restart your miner (if your miner does not have auto resolve dns) after pool is up again to resolve to new public IP.

pool down time will be planned at :
block 23570 for US pool (http://pool.burstcoin.io)
block 23560 for SG pool (http://pool2.burstcoin.io)
block 23550 for EU pool (http://pool3.burstcoin.io)

when  will the maintenance be completed

java miner no longer work ? I keep getting unable to get mining info from wallet. I cleared my cache and my ping is correct

it still work, maybe you are seeing this while pool is still down

burstcoin.io US pool update

miners on burstcoin US (http://pool.burstcoin.io) pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns)
new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io
i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners
and pool running cost is reduced 4x cheaper, so BCPT (https://burstcoin.io/index.html#asset:12791182347560578640) holder would get better profit too
new host hardware is cheaper but faster, so will see performance improvement there

EU (http://pool3.burstcoin.io) and SG (http://pool2.burstcoin.io) pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated

Any thoughs why mz cc++ miner crashing once or twice a day?

Hello, anybody home? I received --- again instead of burstcoin... Especially with good share %  >:(

https://i.imgur.com/Bi7v7Lg.jpg

You might want to try a different pool and newer pool.

http://pool.burstcoining.com:8124/

https://burstforum.com/index.php?conversations/official-burst-ga-eu-beta-test-group-official-convo.191/

Burstnewbie here.

Do I have to download whole blockchain to solve {"errorCode":5,"errorDescription":"Unknown account"} error while entering my pools reward assignment info?

I have already transfered 5 transfered to confirm my burstcoin address.

All strikes this time!!!  >:(

https://i.imgur.com/ArNvIHf.jpg

you need to see if after the payments, does pool has positive balance or not, if pool does not have balance, all accounts (not just yours) will be look like that, its because pool does not have funds to distribute to miners until a miner on pool found a block and pool receive the burst reward to be distributed starting on that block, until all funds is zero again

hi all!

anyone help me?

i need to start to mining burst and i try this:

1- i have just make a wallet...all ok (my id is BURST-5NHS-B3A3-AVGL-4E4BM)
2- i have make a plot in my hd with plotgen_win
3- best miner??
4- how configure this??
5- ???

best regards

All strikes this time!!!  >:(

https://i.imgur.com/ArNvIHf.jpg

hello

I think the pool is down..

Missing Passphrase and no deadline,

The pool still down, where is the owner uray?