Good afternoon, gentlemen! I am glad to take part in the discussion of such a resonant project. Someone might ask me why? That's why: -The team of scientists who devoted their entire life to science -Real business. -Technology Solves the most painful issue, the issue of ecology. -Besides solving the issue of ecology, you can earn. -Low cost PRT coupled with quick payback. What could be better? Only the fact that technology has no analogues and competitors. This is really a breakthrough! Brilliantly!  I've waited a long time for something like this, I do not want to discuss casino, payment system or a platform with the prospect of a scam.  |
|
|
|
Hello, the team!
I'm glad to see that the work on the project is developing.
Have you contact with the administration of the ICODrops website? As I said, they can make a great advertisement for your project!
I contacted them but their answer was pretty negative! Showed some bad attitude against our project :-) It's rather strange ... Considering all the circumstances  What exactly did they say? In any case, my belief in your project will not shake by the negative opinion of someone. I'm waiting for news and further movement! |
|
|
|
|
Hello, the team!
I'm glad to see that the work on the project is developing.
Have you contact with the administration of the ICODrops website? As I said, they can make a great advertisement for your project!
|
|
|
|
I'd agree that this will be more of a long term play. The ideal situation is that the device gets a wide market appeal and once it starts reaching the masses then the token will really take off.
Yes, I agree. In that regard, we are working hard on the machine to bring it to the market asap. We are quite confident that investors will be more willing to invest if they see the traction. Did I understand correctly that you are already planning to install the device somewhere before the end of ICO? About the impact I will say so-many HYIP-a lot of investment. I invite you to contact https://icodrops.com this wonderful community will help you in advertising and will add confidence to investors. I think, ICODROPS will appreciate your project. This is a serious community, even ICON thanked them. ( ICON Top 20 market, 20th place, 49 times the value of the token has been increased since ICO) Regards! |
|
|
|
Gentlemen, some unhealthy silence in the chat, it seems that everyone is busy with New Year's fuss  I want to ask the team: how much money has already been invested in your project, and what about the counter on the site? He has been on the same place for more than 2 weeks  |
|
|
|
Just a quick reminder:
We plan to start paying dividends starting from Jan '19. Dividends will be paid in Ethers quarterly.
Based on our predictions, we are pretty sure our token will rise in value pretty soon: due to economy of scales, costs should go down pretty soon and dividends will be substantial.
Sounds really great! Altough Im a bit scared with dividend paying tokens because they must be compliant to a lot of regulations in order to be able to really pay the dividend. Also the exchanges recently started to delist some dividend paying tokens, thats also scary. Have you covered the legal side from all angles for your token? Under which legislation does Health Monitor operate? Thanks in advance! Hello, we act under the Czech legislation. Yes, we are aware that dividends tokens have troubles in the USA, but , at the moment no problem in the EU. Best Do you think we will have some kind of regulations over Europe in 2018? However my idea is that EU is very bullish on crypto (see France) My opinion: the translation process has already begun. I mean the translation of business into a digital format of the blockchain, it is quickly qualitative, with a minimum of support and without the possibility of corruption. Easy audit. I think that this technology will live without significant restrictions. |
|
|
|
|
How the development of advertising is going? What further events / meetings are you planning?
|
|
|
|
Just a quick reminder:
We plan to start paying dividends starting from Jan '19. Dividends will be paid in Ethers quarterly.
Based on our predictions, we are pretty sure our token will rise in value pretty soon: due to economy of scales, costs should go down pretty soon and dividends will be substantial.
I think that such news will attract more investors to your project. For me, this is great news, because I bought your tokens and I'm going to keep them for a long time. Indeed, the news is excellent, I want to buy tokens for a round sum. In order to earn a good amount of money every Q  Now,while the market is hot, I increase the value of my portfolio in all possible and impossible ways. I think the others are doing the same thing and the main investment infusions in your project will be after the new year. |
|
|
|
|
Hello, the team!
Any news?
What about the investors, that you have attracted during the conference in Malta?
On what are you working now?
What further events?
|
|
|
|
And is this a working device? I am confused by the possibility of determining diabetes with breathing.
Yes, it's a working device (btw, we are constantly improving it). We have showcased it at the Bitcoin and Blockchain conference in Malta a couple of weeks ago. It must have been quite a unique experience to use this device. Instead of a doctor diagnosing you (expensively) we only have a booth to do that. We really are now entering the realm of the future. Yes, one of the major reasons people are not going to the doctors is because having a medical check up is so expensive. Unlike with Health Monitor, it is super cheap to get yourself checked. The future is already here! In addition to my previous post, I want to say that the average price of diagnosing lung cancer costs from 100 to 400 dollars. And with the help of HealthMonitor it costs only 5 dollars, it's just amazing. Plus, the definition at an early stage, and not when all is lost ... The benefit of project is obvious: Big Income for Investors Many Saved Lives The success of developers and glory. I do not advertise, I just say what I think about it |
|
|
|
Hi, will your device be able to diagnose thyroid illnesses as well?
thank you and good luck with your project!
hello, not at the moment. We are working on several other diseases but can't disclosure them. That is great¡¡ just 4 is not enough to get this project mooning, the more people have access to detect, the more people will use the vending machine, so I don't know why are they disclosed, perhaps because you are not sure if you could pull off some and to not announce something you can't be certain yet, that or you want to make it a surprise XD. I think 1 is enough to start the project. People who have diabetes at least twice a day must measure the blood glucose level. And they need to pierce their fingers. And here for $ 5 (5$ is nothing for EU residents) they can avoid an unpleasant procedure. In total there are 500 million people with diabetes in the world and if the team grabs at least 0.5% of the market, it will be a tremendous success. Who thinks so? |
|
|
|
I dont think FDA approval is needed, it’s usually for new drugs or medical product, not medical devices. HEALTH MONITOR is made for medical diagnostic so no problem for the safety of people using it.
Exactly, Health Monitor is a medical device. But I am sure there are FDA requirements for medical devices as well. I wouldn't think FDA approval is needed, but I bet they need a disclaimer about the results not being medical recommendations and to consult a doctor first. Yes this is really needed, if not they will be sued by everyone in the US  Consult to a doctor after the checkup is the important thing. The rresult of the HealthMonitor is just to be more aware. This device is registered as an electrical device and is certified accordingly. Therefore, it is said that only the doctor will put the exact diagnosis. Everything is done correctly, you understand what I mean |
|
|
|
And is this a working device? I am confused by the possibility of determining diabetes with breathing.
Hello! Yes, it is possible, and there is a working prototype. I think that there should be no embarrassment. The definition of biomarkers in exhaled air is the same as the definition of biomarkers in the blood. Only the appropriate device and clinic tests are needed, here there are both. |
|
|
|
Some questions about the straws:
1. How do you make sure the Health Monitor has enough straws? It means you need staff to check and refill the straws every few days if the straws are stored within the machine. Multiple times a day if they are in a dispenser, because kids will take them all. Have you taken into account the costs of refilling straws?
2. If you store the straws inside the Health Monitor, you need to design and construct a dispenser mechanism. Have you take into account those costs?
3. Is it possible for the straws to release particles that influence the measurements?
I think that if the team was able to create and promote such a project, then it would not be difficult to solve the problem with the delivery / realization of disposable tubes through the device itself. But the question itself is important, there is no dispute. Therefore, I also want to hear the opinion of the development team on this issue. They can easily put a sensor in it that will give a signal when the straws/tubes are almost out of stock. The 3th question is more interesting In occasion of the third question. I believe that there will be no influence. I have a higher technical education and the idea that a straw will emit acetone or pentane or some kind of those gases at a temperature of 25C just You would be surprised how many chemicals are involved with straws. Straws are made from polypropylene mixed with plasticizers ( phthalates), pigments, antioxidants, stabilizers, and fillers. There are frequent warnings about hormone disrupting chemicals such as Bisphenol A and its replacements leaching from plastic products. You could say government agencies make sure straws are safe. We typically assume government agencies to check the safety of products, yet Bisphenol A (and other chemicals) leaching metal food cans are ubiquitous. We report that chemicals with EA were released (leached) from many unstressed BPA-free PC-replacement products (including products for babies).Thank you for the information, my friend, I have meant that in 5 seconds nothing from the straw will not stand out ... and if it does, it is necessary to determine what it is and how it affects the readings of the device, and make appropriate corrections. But my opinion: There will be nothing to go out. |
|
|
|
As a scientist I hope your project will become very successful in the nearest future!  it will be if the team sticks to the schedule and do their due diligence. I've been following this project from the beginning. I can say that I am satisfied with the work of the team. But there is a slight tension: about the fact that the meeting in Malta was, the investor was attracted, but on the site I did not see any special infusions of money. Question to administration: how are your affairs going with the involvement of investors? |
|
|
|
Some questions about the straws:
1. How do you make sure the Health Monitor has enough straws? It means you need staff to check and refill the straws every few days if the straws are stored within the machine. Multiple times a day if they are in a dispenser, because kids will take them all. Have you taken into account the costs of refilling straws?
2. If you store the straws inside the Health Monitor, you need to design and construct a dispenser mechanism. Have you take into account those costs?
3. Is it possible for the straws to release particles that influence the measurements?
I think that if the team was able to create and promote such a project, then it would not be difficult to solve the problem with the delivery / realization of disposable tubes through the device itself. But the question itself is important, there is no dispute. Therefore, I also want to hear the opinion of the development team on this issue. They can easily put a sensor in it that will give a signal when the straws/tubes are almost out of stock. The 3th question is more interesting In occasion of the third question. I believe that there will be no influence. I have a higher technical education and the idea that a straw will emit acetone or pentane or some kind of those gases at a temperature of 25C just |
|
|
|
Some questions about the straws:
1. How do you make sure the Health Monitor has enough straws? It means you need staff to check and refill the straws every few days if the straws are stored within the machine. Multiple times a day if they are in a dispenser, because kids will take them all. Have you taken into account the costs of refilling straws?
2. If you store the straws inside the Health Monitor, you need to design and construct a dispenser mechanism. Have you take into account those costs?
3. Is it possible for the straws to release particles that influence the measurements?
I don't think it will cost a lot for straws. Because from the video i saw they are just regular straws which are very cheap. Also, i believe the machine isn't that small and hundreds maybe thousands straw can be put its dispenser. wondering about R & D budget. Have you reserved fund for research and development and FDA approval process? how much percent? This is a good question! I wanted to look it up in the whitepaper, Have been looking for 5 minutes on the website, but could not find it. Did they removed the whitepaper? Hi they didn't remove it. It is on the main page at the bottom, under the Documentation section. https://drive.google.com/file/d/0B-QBdFrWXGeAdnRQaHlUbV9QNm8/view |
|
|
|
Some questions about the straws:
1. How do you make sure the Health Monitor has enough straws? It means you need staff to check and refill the straws every few days if the straws are stored within the machine. Multiple times a day if they are in a dispenser, because kids will take them all. Have you taken into account the costs of refilling straws?
2. If you store the straws inside the Health Monitor, you need to design and construct a dispenser mechanism. Have you take into account those costs?
3. Is it possible for the straws to release particles that influence the measurements?
I think that if the team was able to create and promote such a project, then it would not be difficult to solve the problem with the delivery / realization of disposable tubes through the device itself. But the question itself is important, there is no dispute. Therefore, I also want to hear the opinion of the development team on this issue. |
|
|
|
It has to be clear that investores need to keep in mind that this is a mid to long term project.. because we're talking about people's health.
Which actualy means that they should take care of the info that is given to the people using the devices.. and there cannot be any error in the results.
So.. Taking in account that there will be a thorough testing period and the fact that those devices need to be placed on location that have been allowed for these... its quite obvious it will take some time to finetune.
Most ICO project are a long-term hold. I suggest everybody who has no experience in trading to hold it until the development is finished. yes, buy and hodl and forget it best option nowadays due to the high volatily of cryptcurrencies. buys some and forget the key and look back after a couple of years. Buy and hold. In addition, personally I do not see another good opportunity. A large increase in capitalization is not expected, so X multiplication will not be (although who knows) In general, I agree. Buy and forget for a couple of years the most correct option. Yes, it is the best option but also it is the hardest to achieve. My strategy is to buy and check the price 1000 times in a day. It is working great It works great, there's no arguing, but how's your nerves? In favor of my version I will say that I know the person who has bought the Antshares(NEO) on the ICO for $ 1000(0.036$per unit). And he remembered about them just recently, he became cosmically happy!  |
|
|
|
|
Show Posts
