please, anyone know what is the best MB to mine on ZOMBIE mode?
Any mobo that have 4 PCIE gen 3 16x?
Even if you can get mobo with 4 PCIE gen 3 16x, you still need CPU that have 64 lane for getting 4x16, and that way more expensive vs gain that you can get from mining eth. |
|
|
|
Is there anyway to check what value that --zombie-tune on running rig (command line like press "S" for status at TRM)?
In HiveOS: cat /var/log/miner/lolminer/lolminer.log | grep ": --zombie-tune" Ah, thank you yo. |
|
|
|
|
Is there anyway to check what value that --zombie-tune on running rig (command line like press "S" for status at TRM)?
|
|
|
|
I can only place 2 gpu on my z97 asus maximus vii formula. How can you place yours at last 3 slot? My 2nd gpu fan stick to back 3rd gpu, using sapphire 570.
The only solution opencase and try to fresh them from outside... Other options are complicated... Ah, I see. Really hard yo, since my country so hot. |
|
|
|
|
I can only place 2 gpu on my z97 asus maximus vii formula. How can you place yours at last 3 slot? My 2nd gpu fan stick to back 3rd gpu, using sapphire 570.
|
|
|
|
|
So what is the Loud miner doing in this thread?
|
|
|
|
hey guys, i forgot about the 18 octomber update and i've mined thin air the past days.
now i've downloaded the new version, i copy paste the bat file in the new one and i get half the speed i had in the past?
how can i fix this? is there a new command with the new update that i should insert in the bat?
this is my bat: cast_xmr-vega --algo=-1 -S pool -u address.user --opencl 1 -G 0,1,2,3,4,5
thanks
Update your driver at least to Adrenalin 18.6.1. |
|
|
|
[2018-10-23 19:44:18] GPU0 : 1883 H/s [T: 54c, RPM: 1090, CC: 1474 MHz, MC: 920 MHz][BUS:20]
[2018-10-23 19:44:18] GPU1 : 2099 H/s [T: 60c, RPM: 4803, CC: 1408 MHz, MC: 1100 MHz][BUS:11]
[2018-10-23 19:44:18] GPU2 : 1959 H/s [T: 45c, RPM: 3264, CC: 1408 MHz, MC: 1100 MHz][BUS:8]
[2018-10-23 19:44:18] GPU3 : 1962 H/s [T: 46c, RPM: 3333, CC: 1408 MHz, MC: 1100 MHz][BUS:5]
[2018-10-23 19:44:18] GPU4 : 1817 H/s [T: 51c, RPM: 2404, CC: 1407 MHz, MC: 900 MHz][BUS:14]
[2018-10-23 19:44:18] GPU5 : 2115 H/s [T: 58c, RPM: 4751, CC: 1408 MHz, MC: 1100 MHz][BUS:17]
[2018-10-23 19:44:18] Total: 11835 H/s
2115 and 2100 on both my Vega FEs beast of cards , under 60 degrees too I had to reboot then turn off HBBC then turn it on again and reboot again and it worked I try to do that on my rig, but the problem still persist. |
|
|
|
Hello,
I got strange problem. Kind like pyramid problem, previous card always lower than next card.
[2018-10-22 17:56:05] GPU0 : 1512 H/s [T: 62c, RPM: 3673, CC: 1200 MHz, MC: 900 MHz][BUS:21] >> vega56
[2018-10-22 17:56:05] GPU1 : 1523 H/s [T: 68c, RPM: 3666, CC: 1050 MHz, MC: 800 MHz][BUS:18] >> vega56
[2018-10-22 17:56:05] GPU2 : 1698 H/s [T: 63c, RPM: 3693, CC: 1202 MHz, MC: 900 MHz][BUS:24] >> vega56
[2018-10-22 17:56:05] GPU3 : 1694 H/s [T: 62c, RPM: 3679, CC: 1350 MHz, MC: 950 MHz][BUS:15] >> vega56
[2018-10-22 17:56:05] GPU4 : 1969 H/s [T: 65c, RPM: 3698, CC: 1350 MHz, MC: 1100 MHz][BUS:9] >> vega64
[2018-10-22 17:56:05] Total: 8396 H/s
I'm using windows 10 1803 and 18.6.1 adrenalin driver.
I try even install clean windows etc still error like that. Anyone can help?
Thank you.
==
Oh I forgot to mention, i just lower my core for make it to stay below 70c, and even i make it same as other 1350 900, the problem still persist.
Your vegas temperature is too high. If your core is 68c, HBM and Hotspot is 78c+. HBM and hotspots are always 10c higher than the core temperature. This is very dangerous, Keep the HBM and Hotspot temperature below 68-72C. This is the difference if using v7 [2018-10-23 10:40:35] Pool rejected result 0x000036FE (low difficulty share) [2018-10-23 10:40:39] GPU0 : 1740 H/s [T: 58c, RPM: 3698, CC: 1200 MHz, MC: 900 MHz][BUS:21] [2018-10-23 10:40:39] GPU1 : 1503 H/s [T: 63c, RPM: 3719, CC: 1050 MHz, MC: 800 MHz][BUS:18] [2018-10-23 10:40:39] GPU2 : 1789 H/s [T: 59c, RPM: 3723, CC: 1202 MHz, MC: 900 MHz][BUS:24] [2018-10-23 10:40:39] GPU3 : 1926 H/s [T: 62c, RPM: 3690, CC: 1350 MHz, MC: 950 MHz][BUS:15] [2018-10-23 10:40:39] GPU4 : 2063 H/s [T: 57c, RPM: 3665, CC: 1350 MHz, MC: 1100 MHz][BUS:9] [2018-10-23 10:40:39] Total: 9021 H/s And before temp around 65-70 in hot days (at ver 7). |
|
|
|
|
I think fast job option good for rig with hash 8k ++ or maybe even 6k ++
|
|
|
|
|
Hello,
I got strange problem. Kind like pyramid problem, previous card always lower than next card.
[2018-10-22 17:56:05] GPU0 : 1512 H/s [T: 62c, RPM: 3673, CC: 1200 MHz, MC: 900 MHz][BUS:21] >> vega56
[2018-10-22 17:56:05] GPU1 : 1523 H/s [T: 68c, RPM: 3666, CC: 1050 MHz, MC: 800 MHz][BUS:18] >> vega56
[2018-10-22 17:56:05] GPU2 : 1698 H/s [T: 63c, RPM: 3693, CC: 1202 MHz, MC: 900 MHz][BUS:24] >> vega56
[2018-10-22 17:56:05] GPU3 : 1694 H/s [T: 62c, RPM: 3679, CC: 1350 MHz, MC: 950 MHz][BUS:15] >> vega56
[2018-10-22 17:56:05] GPU4 : 1969 H/s [T: 65c, RPM: 3698, CC: 1350 MHz, MC: 1100 MHz][BUS:9] >> vega64
[2018-10-22 17:56:05] Total: 8396 H/s
I'm using windows 10 1803 and 18.6.1 adrenalin driver.
I try even install clean windows etc still error like that. Anyone can help?
Thank you.
==
Oh I forgot to mention, i just lower my core for make it to stay below 70c, and even i make it same as other 1350 900, the problem still persist.
|
|
|
|
pagefile = number of cards * card memory amount + 2
example: 6x RX with 8GB = 6*8+2 = 50 - so type 50000 min/max
Yo, kind like that >> I even use 60GB for page file. |
|
|
|
Hi everybody, can anyone please help me with an issue I'm dealing with? In forward, I apologise if this problem has been asked and resolved before already. I'm having a problem running SRBminer across my win 10 rigs, I'm getting this error in windows application has been blocked from accessing graphics hardware Bear in mind my win 10 rigs are perfectly operational on other miners such as claymore's but windows is blocking SRBminer's access to graphics hardware for some reason and I don't know how to bypass this shit. the result of error I get in the miner is in this image  How did you guys bypass this windows issue? It seems like it's a fairly simple registry fix or something Thank you! I think you need to add more pagefile |
|
|
|
Para sesepuh mohon saran dimana bisa beli alat miner budget 50 jt?
Bagusnya merakit pakai VGA atau beli asic?
Beli VEGA. VGA bro bukan VEGA AMD RX VEGA 56/64. 1950-2100h/s cryptonight 140-160w dan cuma makan 1 slot PCIE. RX 4xx/5xx 900-1000h/s 110-120w. |
|
|
|
looking to get a vega and I am wondering if there are pros and cons vs the 2?
someone mentioned in a slack the 56 was just as good and took less power, but I dont want to get the 56 and then it become obsolete because the 64 has something better
and I dont want to give up performance to save a couple of bucks,
Im just looking to add the vega to my 1070 set up, its true the vega has the power of 2 or 3 older model cards that people have?
if they 64 = 4 video cards and the 56 = 2 I think Ill go with the 64, but if the 64 is like 2.5 video cards I will go with the 56
please help me thanks
56 around 1950, 64 around 2050. Go for CHEAPEST GPU. |
|
|
|
You need to use Windows 10 1709 (Fall Creator Update) and 17.11.4 AMD Drivers and don"t forget to change mode to COMPUTE for all GPU.
Hello Yes i am using the latest windows version. Updated and everything. Version 1709. The drivers i am using are 17.30.1029 and there isn't anywhere that i can change the settings to compute as i have read elsewhere. I have flashed all of my 6x cards that windows detected using AtiFlash and a modded bios version specifically for my card. Windows wasn't detecting the 7th card with stock bios either.  this is what i see in the bios when i log in. btw i can only log in to bios when my screen is connected to the onboard graphics. About the noob question above. No the mobo DOES NOT come with a heatsink for your cpu. You get the stock heatsink packaged with the cpu unless you buy a tray version. Its easy. 1. Right click windows icon >> device manager >> go to your gpu >> right click GPU >> uninstall >> delete the driver software for this device >> do it for all your GPU. 2. Right click my computer >> advance system setting >> hardware >> device installation setting >> NO >> save change. 3. Go to safe mode or just do DDU and then restart your PC. 4. Download AMD driver 17.11.4 >> you can search it on google and then install it. 4xxx >> I forgot this step >> IMPORTANT STEP if using mod bios >> run amd/ati pixel clock patcher. 5. Restart PC >> go to amd setting >> gaming >> global setting >> change mode from graphic to COMPUTE >> do it to all your GPU. 6. Restart PC again and then start mining. I tried to change to compute from graphic and seems not working on my card, Im using mixed brand of rx 570 4gb, MSI Gaming x, Aorus, Sapphire nitro+ rx570 8gb but when i change to compute the radeon restarted but when i looked again, there is no changes in some of my cards, yes I do it repeatedly in every card 1 by 1.. And tried also the 17.11.4 but I can't see any differences, I go back to the latest of adrenaline. Yo, it will be like that, cause AMD software is shit. Change all to compute mode, it will restart after each change, but sometime it stay graphic (only visual) just go to next GPU. After you change it all, restart computer, and recheck again if there is still that not compute mode, change it again and then restart again, after that start mining. Remember, you need to restart pc after change it to compute mode. |
|
|
|
I can confirm this. Running 10 RX580s on win10 with drivers 17.11.4 without problems.
@Bakhtra
Can you give me your settings in afterburner if you are using this? afterburner not working for me as it does not recognize more than 8 GPUs and its not working with driver 17.11.4. Hence I am using TRIXX instead (similar tool from Sapphire instead of MSI afterburner).
I don't use AB/Trixx, I just mod gpu bios. |
|
|
|
Para sesepuh mohon saran dimana bisa beli alat miner budget 50 jt?
Bagusnya merakit pakai VGA atau beli asic?
Beli VEGA. |
|
|
|
Update.
I re-built my setup from scratch. Re-installed windows on a new ssd .
Here is what works for me:
The Asrock mobo doesn't give me picture on my screen even when i clean installed everything and had my screen connected to a graphics card. Im using XFX RX580's.
In bios the default graphics is PCIE2 but if i have a card connected on it either directly or via riser it just gives me black screen and i cant even access bios.
So i used the onboard graphics to setup windows. Once i had windows i shut down and put ONE card on the main PCIE which is PCIE2.
Then at the first boot with ONE AMD card i installed the drivers Bakhtra kept mentioning 17.11.4.
Then i restart and switch the Global setting function to compute in the AMD settings. Shut down again.
After installing the first card i went ahead and connected 7 more cards. I did then ALL at once. Then i switched the setting for each card.
One thing i noticed with the 17.11.14 drives was that i could not get MSI afterburner to work. I could not change clock or mem Hz at all. Claymore gave me about 26Mh/s
So then i used DDU and after switching back to onboard graphics i installed the latest AMD blockchain drivers. This time after the restart all the cards were shown. One small detail. I have a card connected to the main PCIE but no card connected to the slot right before it. Havent tweaked anything in the bios either.
Windows now sees 8 cards and with the latest drivers i can use Afterburner and get some extra juice off of my cards.
Running Claymore at the moment at 29.9 - 30Mh's
Quick note: I had to up windows virtual memory cause claymore gave me a DAG error. After adding more virtual memory everything works as a charm!
Now waiting for the triple PSU cable to connect the other 2 cards remaining and have a 10x RX580's setup.
I ll try to help as much as i can if anyone else getting crap from that board..
Also it wont recognize Intel M.2 SSD's..
Blockchain driver will not recognize your last remaining card, since max you can run with it is 8 GPU. For more than 8, you need 17.11.4. Just mod your bios as your AB setting, if you really need to use that 2 remaining card. |
|
|
|
 sedih lapak malah dibikin tuyul2 cari post kwkw moga2 indo ke blacklist aja lah dari bounty campaign biar pada mikir Pemikiran sempit, pasti UCUP anaknya. Bikin aku pengen nge flame terus. |
|
|
|
|
Show Posts
