hi, yes i confirm, you need custom firmware for ignor eprom info, for allow miner to start ! i offer T17 firmware for real 1% dev fee, never more  and i assur support on discord if you need any help  |
|
|
|
hi, dsl to contradict but in reality on the T9 + the hashboards are as follows: Chain 1 = 2 - 9 -10 Chain 2 = 3 - 11 -12 Chain 3 = 4 - 13 - 14 As you tried to change the white cable of the hashboard, and the problem is to move, I believe that the problem comes from the cable ... try to clean it well Finally, do not install firmware as suggested, I offer it FREE !!! simple advice, why pay: D? as very well explained above, you must run a firmware before 2019, if this is not the case, you must downgrade by SDcard. Here is the procedure if its tells you: 1: Install the latest original firmware before 2019, here it is: https://easyupload.io/p44ue62: install my mod (by update firmware on web gui) to unlock the functions, here it is: https://easyupload.io/u6utr5Enjoy! start with 650mhz and 830mv, you will have a better hashrate AND a clear drop in consumption;) and heat! (ps: 650mhz is stock frequency for this chips, same at S9) |
|
|
|
|
honetement tu a pas trop d'issue la ...
j'ai eu ce cas, et ces mineurs sont reputé tres fragile, tu peut le voir dans la section englaise sur bitcointalk
j'ai eu moi meme un T17 qui a perdu 2 carte, et un T17+ qui a perdu 2 cartes aussi, a ce jour, apres de nombreuse heures passer dessu, j'ai reussi uniquement a reparer une carte (sur les 4)... Tu peut te renseigner mais la réparation est très cher...
Sinon moi même je cherche des pièces, ou mineur complet HS comme le tien pour les pièces également...
Si tu souhaite le vendre (après avoir vérifier que je ne te raconte pas de connerie :p) je suis acheteur (en crypto)
|
|
|
|
|
Salut, en réalité, dans l'ordre de démarrage, le mineur lance l'alimentation ici :
2021-03-30 16:57:05 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.53, check voltage passed.
En suite il lance la détection du nombre de puce , ce mineur doit en trouver 44 par cartes ... Voici :
2021-03-30 16:57:31 driver-btm-api.c:1066:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-03-30 16:58:52 driver-btm-api.c:1066:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-03-30 17:00:10 driver-btm-api.c:1066:check_asic_number_with_power_on: Chain[2]: find 22 asic, times 2
il ne trouve pas 44 asic (puces) donc il etein la carte , voici :
Chain 0 only find 0 asic, will power off hash board 0
Chain 1 only find 24 asic, will power off hash board 1
Chain 2 only find 22 asic, will power off hash board 2
Et donc, comme le mineur n'as que 3 cartes, et que aucune son fonctionel, alors il etein tout, voici :
ERROR_SOC_INIT
2021-03-30 17:00:56 driver-btm-api.c:149:stop_mining: stop mining: soc init failed!
2021-03-30 17:00:56 thread.c:1064:cancel_read_nonce_reg_thread: cancel thread
2021-03-30 17:00:56 driver-btm-api.c:135:killall_hashboard: ****power off hashboard****
Je vous ai sélectionner les élément clé, je donnai bien ces mineur, malheureusement, ce mineur est a recycler, ou réparer (mais le cout n'en vaut peut etre pas la chandelle et n'est que provisoire))
|
|
|
|
|
Salut, mais avec plaisir !
Rejoint moi sur discord, et envoi moi ton kernel en pc, je te dirai illico ce qui ne va pas.
Tu peut aussi le poster ici, sa peut servir a d'autre perssonne...
|
|
|
|
Salut a tous ! je propose mes firmware pour ceux que sa intéresse, je propose également des frais en deçà de ce que l'ont a l'habitude de voir ... et surtout, j'assure mon soutien pour sont utilisation en personne n’hésitez pas pour toutes questions ou autre voici mon discord : https://discord.gg/JdQJ77X |
|
|
|
hi, c'est toute les 2 semaine c'est bien cela ? merci  |
|
|
|
Hi, in reality I believe that the 3 cards are working well, as you said, I also believe that the power supply is not the problem (I'm sure) ... post the kernel with the 3 cards connected ... you will find this (my for exemple, just have two hashboard) read chain major type: 0 minor type: 2 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 read chain [1] hardware info: major type: 0 minor type: 2 chip level: 0 bom version: 0x10 pcb version: 0x39 fixture 8pattern result: L0 and, I am almost sure that the 3 cards do not have the same version, which results in the original firmware controlling if the 3 cards are coded identical, if this is not the case, it stops the hashboard , I pence that you bought a second-hand miner with 3 different cards from diferrent miners ... |
|
|
|
|
Hi, I usually respond quickly to discord, and I assure help! there is no need to leave repeated messages;)
the link is up to date, you can also leave your comments to give your opinion on my mod, it could be nice, and it could help some people;)
to the pleasure
|
|
|
|
i love it !  i love the Antminer S5, is funny with blue / red / green light lol ! and is my first miner !!! |
|
|
|
hi, i edited link methode, now please join my discord for see links , is more easy, and if you need help is better for help you. |
|
|
|
|
hi, from what I see, it will indeed seem that the miner is corrupted ... I confirm "the virus" is found exclusively in the control card ... the hashboard cards are not affected ...
if the flash by sd card (if it is done well) does not give result ... I am very surprised ... or a virus particularly efficient ... the solution will be to return with SSH, and to see what it goes below! but sela is very difficult to explain, you must know the files of the miner and know how to use SSH, or even unlock it, because if it is really a virus, it must necessarily have locked SSH.
another possibility, very very rare, but it is possible that the miner just corrupted a file, notably the "miner-stat.cgi", the miner actually works perfectly, but the info displayed is wrong.
|
|
|
|
Bosse ! |
|
|
|
|
this is also possible, you just need to re-install dropbear: D
|
|
|
|
|
in reality the mod already exists: D but is not in public order ... I remain discreet, but who will have the right of sale here: D !!! ? hahaha
|
|
|
|
hi, i search all parts or miner complet for parts on UE, please make your offerts thanks |
|
|
|
|
I want to take them, but obviously it seems to complicate, I need an escrow service! do not accept paypal (I can understand), there is not much way to sell in these cases the ...
If you have a security solution for me then I accept with pleasure ... let me know ...
|
|
|
|
Hi! I tried this ... my T17 card showed 24chips, passing through the oven, gradually increasing in temperature, I have absolutely nothing to remove like plastic or other !!! you should know that on these models, bitmain has to use soldering at low temperature ... so no need to go up high temp to recast everything, it is therefore their default (the chips fall) ... after my test, twice on 2 cards, absolutely no change, I tried at 135c, 140c, 145, and 155c, everything was recast (be careful not to move anything, the chips no longer hold), but unfortunately no results , always 24chips detected ... watch my video, you have to download it (I don't know how to post a video without having to register somewhere) https://easyupload.io/h2mmpz |
|
|
|
|
It's actually much more difficult since S9 ... because since then, the sources are no longer shared (as it should be) ... in fact, XXXXXXXXXXXXXXXXXX there are leaks, and some have the sources for compile, from this moment, indeed, anything is possible;)
|
|
|
|
|
Show Posts
