Sadly, new money really does change some people for the worse. He's a young kid. Maybe he'll learn some humility and professionalism when he grows up a bit more.
Not sure if he ever had to work for his own money... |
|
|
|
How do I find out if the PSU is damaged ? Is there a test to run ?
Plug the PSU in, take an isolated wire and put one end where the green wire ends at the MB connector from the PSU and the other end where a black wire ends. The PSU should run if nothing is wrong with it (fan spinning). Sometimes it also helps to take the MB out of the case (if you use one ?) |
|
|
|
|
colinistheman was very helpful changing my order. Great support. Thanks again.
|
|
|
|
|
Tried to place an order yesterday but pitpay was not working for some reason. Will try again this afternoon.
|
|
|
|
See? I told you peoples pirate would pay.
I hope he has to pay in a different way soon...   |
|
|
|
I'm making it my mission to get all the hashing power I can and boycott this cocky pool.
 hashpower... separates the men from the boys ! |
|
|
|
There was a time 24h rounds were normal Lean back and let the machines do the work. |
|
|
|
|
Some asshole at the German Zoll had his big day.
|
|
|
|
|
More than two years of mining with my 5850s @ 70 C
|
|
|
|
The main reason why it got a suspect by the customs: they included a american power cord in the package! Holy moly what would've happend if the user used that cable? USA(120volt)(germany 230volt) There's a reason the plug won't fit.  Not too long ago miners had to have some basic knowledge to run their stuff... |
|
|
|
Even in non-EU states(like Switzerland)!
Never had troubles with Swiss customs. And as a HAM I shouldn't have problems to import hardware without CE sign. |
|
|
|
I'm not sure this is the issue since i'm not getting question marks, and i'm seeing the 0mhps with a fresh login...
Low hashrate ? |
|
|
|
Pool is down..... hope they re not attacking again...
Looks like round two. |
|
|
|
It's time to ship faster   |
|
|
|
I'm also shocked you did not tell him to fuck off as just about all of us would have done.
He's now mining for deepbit... They will make him rich. It's ridiculous to argue about $3 ! |
|
|
|
Edit: I looked in my email pending queue and see an email from a G Lukacs on June 3 requesting a fund withdrawal but they didn't include an account name. If that's you can you do a followup including that information, thanks.
Thank you, doublec, for writing back. My address has already been provided when I created the user "drlukacs2" and so providing another address did not appear to be necessary. However, for greater clarity, please feel free to feel this address: 1GASBhniDWYZ6BSQqxqres28TPxH5ZkHqM Once I receive the deposit, I will update the present thread to confirm so. Turbor paid the bill. TX ID 5c3880e5f90e5274009111ed4cb5dd46c4e25412ec650ef486b0c623fb5b5596 Eure Armut kotzt mich an |
|
|
|
Set -oh to 0.7 or higher in the BTCMiner start code. It will then shut down later. I know that S. does not recommend doing this but since it's a clone you should give it a try. Once the bad chip fails, hit control C, restart and repeat over and over again. If you are lucky it keeps hanging and will then mine fine at a lower frequency. Sounds like cgminer. Try BTCminer for this one board. Gives you more information when the chip goes out. Here you go: 2013-06-19T16:01:30:
(Re)Scanning bus ...
2013-06-19T16:01:30: ztex_ufm1_15y1-0019-03-12: New device: bitfile=ztex_ufm1_15y1 f_default=200,00MHz f_max=248,00MHz HpC=1.0H
2013-06-19T16:01:30: ztex_ufm1_15y1-0019-03-12: MAC address: 0004a36dd5f2
2013-06-19T16:01:31: ztex_ufm1_15y1-0019-03-12: FPGA 1: configuration time: 313 ms
2013-06-19T16:01:31: ztex_ufm1_15y1-0019-03-12: FPGA 2: configuration time: 313 ms
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12: FPGA 3: configuration time: 312 ms
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12: FPGA 4: configuration time: 313 ms
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-1: New FPGA
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-1: Set frequency to 200,00MHz
2013-06-19T16:01:32: Starting mining thread for bus bus-0-0
2013-06-19T16:01:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: added
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-2: New FPGA
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-2: Set frequency to 200,00MHz
2013-06-19T16:01:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: added
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-3: New FPGA
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-3: Set frequency to 200,00MHz
2013-06-19T16:01:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: added
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-4: New FPGA
2013-06-19T16:01:32: ztex_ufm1_15y1-0019-03-12-4: Set frequency to 200,00MHz
2013-06-19T16:01:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: added
2013-06-19T16:01:32: 1 new devices found.
2013-06-19T16:01:32:
Summary:
2013-06-19T16:01:32: Bus bus-0-0 : 4 miners
2013-06-19T16:01:32: Total : 4 miners
2013-06-19T16:01:32:
Disconnect all devices or enter `q' for exit. Enter `h' for help.
2013-06-19T16:01:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: Using LongPolling URL http://api.bitcoin.cz:8401
2013-06-19T16:01:34: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 200,00MHz to 196,00MHz
2013-06-19T16:01:36: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 196,00MHz to 200,00MHz
2013-06-19T16:01:39: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 200,00MHz to 196,00MHz
2013-06-19T16:01:41: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 196,00MHz to 192,00MHz
2013-06-19T16:01:44: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 192,00MHz to 196,00MHz
2013-06-19T16:01:46: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 196,00MHz to 192,00MHz
2013-06-19T16:01:48: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Set frequency from 192,00MHz to 188,00MHz
2013-06-19T16:01:48: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Error: Hash rate drop of 6,0% detect. This may be caused by overheating. FPGA is shut down to prevent damage.: Disabling device
2013-06-19T16:02:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: f=200,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=200,0MH/s, submitted 3 new nonces, luckFactor=1,08
2013-06-19T16:02:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: f=200,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=200,0MH/s, submitted 1 new nonces, luckFactor=0,36
2013-06-19T16:02:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Error: Hash rate drop of 6,0% detect. This may be caused by overheating. FPGA is shut down to prevent damage.: Device disabled since 2013-06-19T16:01:48
2013-06-19T16:02:32: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: f=200,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=200,0MH/s, submitted 2 new nonces, luckFactor=0,72
2013-06-19T16:02:33: bus-0-0: poll loop time: 15ms (USB: 7ms network: 8ms) getwork time: 44ms submit time: 103ms
2013-06-19T16:02:33: Total hash rate: 600,0 MH/s
2013-06-19T16:02:33: Total submitted hash rate: 429,4 MH/s
2013-06-19T16:02:33: --------
2013-06-19T16:02:45: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 200,00MHz to 204,00MHz
2013-06-19T16:02:45: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: Set frequency from 200,00MHz to 204,00MHz
2013-06-19T16:02:46: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 200,00MHz to 204,00MHz
2013-06-19T16:02:48: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: Set frequency from 204,00MHz to 200,00MHz
2013-06-19T16:04:00: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 204,00MHz to 208,00MHz
2013-06-19T16:04:00: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 204,00MHz to 208,00MHz
2013-06-19T16:05:15: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 208,00MHz to 212,00MHz
2013-06-19T16:05:15: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 208,00MHz to 212,00MHz
2013-06-19T16:06:30: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 212,00MHz to 216,00MHz
2013-06-19T16:06:30: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 212,00MHz to 216,00MHz
2013-06-19T16:07:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: f=216,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=216,0MH/s, submitted 13 new nonces, luckFactor=0,89
2013-06-19T16:07:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: f=216,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=216,0MH/s, submitted 17 new nonces, luckFactor=1,00
2013-06-19T16:07:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Error: Hash rate drop of 6,0% detect. This may be caused by overheating. FPGA is shut down to prevent damage.: Device disabled since 2013-06-19T16:01:48
2013-06-19T16:07:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: f=200,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=200,0MH/s, submitted 18 new nonces, luckFactor=1,20
2013-06-19T16:07:33: bus-0-0: poll loop time: 12ms (USB: 6ms network: 6ms) getwork time: 38ms submit time: 71ms
2013-06-19T16:07:33: bus-0-0: Warning: 1 overflows occured. This is usually caused by a slow network connection.
2013-06-19T16:07:33: Total hash rate: 632,0 MH/s
2013-06-19T16:07:33: Total submitted hash rate: 644,0 MH/s
2013-06-19T16:07:33: --------
2013-06-19T16:07:45: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 216,00MHz to 220,00MHz
2013-06-19T16:07:45: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 216,00MHz to 220,00MHz
2013-06-19T16:07:56: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: Set frequency from 220,00MHz to 216,00MHz
2013-06-19T16:09:00: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 220,00MHz to 224,00MHz
2013-06-19T16:09:09: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 224,00MHz to 220,00MHz
2013-06-19T16:09:51: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 220,00MHz to 224,00MHz
2013-06-19T16:09:54: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 224,00MHz to 220,00MHz
2013-06-19T16:10:00: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: Set frequency from 220,00MHz to 216,00MHz
2013-06-19T16:11:11: New block detected by block monitor
2013-06-19T16:12:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-1: f=216,00MHz, errorRate=0,03%, maxErrorRate=0,69%, hashRate=215,9MH/s, submitted 14 new nonces, luckFactor=0,91
2013-06-19T16:12:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-2: f=216,00MHz, errorRate=0,29%, maxErrorRate=1,01%, hashRate=215,4MH/s, submitted 17 new nonces, luckFactor=1,06
2013-06-19T16:12:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-3: Error: Hash rate drop of 6,0% detect. This may be caused by overheating. FPGA is shut down to prevent damage.: Device disabled since 2013-06-19T16:01:48
2013-06-19T16:12:33: bus-0-0: ztex_ufm1_15y1-0019-03-12-4: f=200,00MHz, errorRate=0,00%, maxErrorRate=0,00%, hashRate=200,0MH/s, submitted 17 new nonces, luckFactor=1,21
2013-06-19T16:12:33: bus-0-0: poll loop time: 12ms (USB: 6ms network: 6ms) getwork time: 39ms submit time: 74ms
2013-06-19T16:12:33: Total hash rate: 631,3 MH/s
2013-06-19T16:12:33: Total submitted hash rate: 663,6 MH/s
2013-06-19T16:12:33: -------- |
|
|
|
Fucker means business.  |
|
|
|
|
Show Posts
