Can't wait to see results
|
|
|
I use AMD GPU clock tool to set the memory.
|
|
|
Well i was more thinking that it's perhaps 2k7 and 2k9 at 50% but the slower the better (less noise).
|
|
|
What kind of rpm does a 5830 see at 100% fan ? My ASUS 5850s run between 41 and 49% fan which equals 2400 to 3000 rpm.
|
|
|
Cool idea Sadly i'm too far away. Good luck with ur shop !
|
|
|
3 days left. TICK, TOCK, TOCK
|
|
|
the homepage is great. Now, all we need is some more luck.
|
|
|
6 days to go... tick, tock, tock
|
|
|
amazingrendo may want the XFX. We do in person exchanges here in LA so I can vouch for him.
The ASUS is the better card imo... (i own 2 of them )
|
|
|
That will take forever to pay itself back, I hope you bought it more for fun than for financial gain.
All the hardware money spent is gone for me. I look at it as a hobby. I mine because i like the idea of bitcoin. At the moment i burn money but with only 3 GPUs and the board i can stop whenever i want without hard feelings. @DAT FPGA Board: Accepted 7098, Rejected 60 5850s: Accepted 309674, Rejected 393
|
|
|
Short report from the FPGA section. The hashrates i posted were a bit too optimistic. After 24h you get steady 190 MH/s @ 184 MHz. The software works well but it produces more rejects than cgminer or the Bitminter client.
Newest software seems to slow down to about 165 MH/s after a while. I'm using 111020 instead of 111114. Would be interesting to see how fast it works at max clock frequency. 184 MHz seems to be min. I have a 92mm fan pointed at the board (cooler) so heat should not be the problem.
Hope ZTEX keeps working on the software.
|
|
|
Damn! Where do I get one of those, and what's the price? Made in Germany by ZTEX. http://www.ztex.de/ Paid 327 Euros.
|
|
|
Received my module today. Had a hard time to start it but that was my own mistake . All is very well documented on his homepage and almost ready to start mining. ZTEX is the man. If you want a quality product and great customer service go with him. With his newest miner version i get a hashrate well above 200 MH/s . I'm very happy. Again, thank you for the support !
|
|
|
Here we go: Well above 190 MH/s with the newest software, goes up and down. Old version, first test
|
|
|
I'm uploading them...
|
|
|
i finally started my first ZTEX FPGA board. Nice piece of hardware. ZTEX is the real deal. I had some troubles setting it up and he was very responsive and helpful all the time. Great customer service !
|
|
|
good lord + 30 gh/s with 3 new miner. Nice
|
|
|
Good idea. Now you can choose between pop-up or full page. I like it.
|
|
|
Registered
|
|
|
perfect everything is ok now thanks a lot !
|
|
|
|