|
у всех людей есть зависимость, школьники тоже люди, ну поколение сейчас такое, мне кажется с этим ничего не поделаешь. разве что родители будут являться авторитетом для своих детей, и показывать пример и рассказывать что много играя особо ничего не добьёшься в жизни
|
|
|
|
|
подумайте может у него есть какое то хобби, или что такое что он хочет, но не хватает денег или никак не выходит купить
|
|
|
|
|
твоё утверждение очень субъективно, не все женщины такие, нормальным тоже хочется что бы их покоряли, и они же отвечают взаимностью
|
|
|
|
работа должна оставатся на работе и не стоит её брать домой, но это сложно сделать когда работаешь дома  |
|
|
|
оо ну до такого ещё очень долго , думаю что до этого придут технологии, но увы мы не доживём до того времени  |
|
|
|
|
если вам вместе плохо то и мучаете друг друга, то какой смысл быть вместе. любящий человек не будет провоцировать на ревность.
|
|
|
|
|
если хочется то можно, главное всё контролировать с помощью врачей
|
|
|
|
|
там идёт промывание мозгов, телик делает из нас зомби и отупляет
|
|
|
|
|
тенденция к снижению рубля раз в 5 лет это притянуто за уши, причиной становились совсем другие события. а вот заключение по нефти с Саудовской Аравией и Эмиратами может повлиять, договор вроде продлили до конца 2018, но это все равно может сказаться на рублях.
|
|
|
|
|
я люблю живие карточные игры в покер с друзьями
|
|
|
|
Joined the Airdrop WPdD6od4EPAwhjNwNi9BNsJbpx4AAfpLk6 Lets see how this will develop |
|
|
|
|
Interesting! Do you have a roadmap for future development or plans?
|
|
|
|
Its ESP.conf. You have to change the syntax of the node list below. It has to be like the list that pallas posted: addnode *IP* addnode *IP2* ... Alternatively, you can open the console in the Espers Client and add the nodes manually with the following command: addnode *IP* add
"addednode" : "104.236.150.155:22448",
"addednode" : "159.203.24.196:22448",
"addednode" : "46.101.188.194:22448",
"addednode" : "173.18.196.253:22448",
"addednode" : "208.68.36.6:22448",
"addednode" : "146.185.153.196:22448",
"addednode" : "188.166.155.131:22448",
"addednode" : "107.170.212.222:22448",
"addednode" : "159.203.12.73:22448",
"addednode" : "104.236.150.155:22448",
"addednode" : "159.203.24.196:22448",
"addednode" : "46.101.188.194:22448",
"addednode" : "173.18.196.253:22448",
"addednode" : "208.68.36.6:22448",
"addednode" : "146.185.153.196:22448",
"addednode" : "188.166.155.131:22448",
"addednode" : "107.170.212.222:22448",
"addednode" : "159.203.12.73:22448",
"addednode" : "104.236.150.155:22448",
"addednode" : "159.203.24.196:22448",
"addednode" : "46.101.188.194:22448",
"addednode" : "173.18.196.253:22448",
"addednode" : "208.68.36.6:22448",
"addednode" : "146.185.153.196:22448",
"addednode" : "188.166.155.131:22448",
"addednode" : "107.170.212.222:22448",
"addednode" : "159.203.12.73:22448",
"addednode" : "104.236.150.155:22448",
"addednode" : "159.203.24.196:22448",
"addednode" : "46.101.188.194:22448",
"addednode" : "173.18.196.253:22448",
"addednode" : "208.68.36.6:22448",
"addednode" : "146.185.153.196:22448",
"addednode" : "188.166.155.131:22448",
"addednode" : "107.170.212.222:22448",
"addednode" : "159.203.12.73:22448"
Quick question, espers.conf or Espers.conf ?? EDIT: tried both, but still no active connexion |
|
|
|
Added all nodes but the client still can't connect.  Edit: Nevermind, its working now. The update function is still not working (Connection timed out). |
|
|
|
What do you people think of the Espers price in the (far away) future?
When wil it become interesting to trade against BTC instead of LTC?
This is really hard to predict. When we would knew this, trading would be so much easier In my opinion, active developer and community are the most important part. Long time ago, I had lots of QuBit coins and it was very promising that time. Then the developer suddenly disappeared, the community lost the interest and the coin died. But on this coin, I have a very good feeling as the developers are very active and engaged. With the help of the community, the important steps for increasing the coins value would be: - Add novel features that are interesting for the mass
=> The encrypted message system looks promising.
The feature has to be very easily to use, require low usage requirements (no software installation, but e.g web interface?), adapted or combined to already spread applications (e.g E-Mails)
- Give the coin a practical use and purpose.
This could be achieved by implementing payment methods in (web-)shops so that you can actually do something with this coin.
The only purpose of most coins is just mining them and then dumping for BTC.
As for now, I see ESP also on that level (mining->dumping). But I see good chances to get above this level.
Some shop already showed interest on supporting this coin for payments, according to CryptoCoderz.
- Spread the coin on more popular exchanges.
This will be achieved automatically when realizing the previous steps but we can speed up the progress a little bit.
Though, Novaexchange and Cryptopia are not that bad, these exchanges are not that well known and the trading volume is pretty low.
We should try to get on exchanges like Bter, C-CEX or Poloniex. The ultimate goal would be to hit BTC-E.
So you have to make up your own opinion on how well the chances are to achieve the important objectives. Looking back at the progress since the coin release a few months ago, I have a good feeling that this coin will have some success. I hope that we will get on a level (not coin value, but impact and circulation) like Feathercoin or Monero. Regards |
|
|
|
This is just normal experience when staking, it means you got some orphaned blocks, someone was able to grab that block and complete the staking before you.
Thanks for the help bitwarrior Thanks for clarification. So this is a normal behavior I don't have to worry about? So I will see pretty much of this failed transactions but a few of them will be confirmed in case I grabbed the block first? |
|
|
|
IMHO, Novaexchange should get something in return for the great service. So its ok for me that they participate to the PoS. Regarding PoS, I have a question: In my wallet, I see 2 transactions of the type "mined". I think that this has to be the PoS reward as I don't PoW mine into that wallet directly. One transaction is now over 6h old but on status "Generated but not accepted" / "Conflicted". The other transaction is 20 min old and also on status "Conflicted". Whats wrong here? Is this normal or is something not properly configured?   |
|
|
|
i didnt test under linux because i didn't want to scratch my rig for test
like i always said ...
just a handfull of people have access to wolf0 sgminer opti (maybe 3, 4, 5 or 6 people use it)
FOR MONTHS
Well we could try to debug that miner together if you want to. The error -63 comes from OpenCL function clEnqueueNDRangeKernel and is translated as CL_INVALID_GLOBAL_WORK_SIZE. The first attempt would be to set another work size in the sgminer.conf file. I think it should work by adding "worksize":16 in the config file. Then you may try some numbers (even "1"). Another approach would be to compare the original sgminer with wolfs miner and understand why the original miner doesn't throw error -63. |
|
|
|
Do the included .bin files in wolf's miner not work? You may try the following steps: 1) Start the miner and enter all data for your pool 2) Let the miner create the .bin file and crash with error -63 3) Look for the .bin file, remember its filename and change the filename "espw64-wolf-esp-Tahiti-64.bin" to the one the miner has created 4) Start the miner again, enter all data 5) Hopefully profit? already done 2 months ago errror -63 error just happens via the renaming otherwise nothing happens BECAUSE THESE .BIN ARE NOT WORKING FOR WINDOWS It's that simple DO YOU HAVE .BIN WORKING FOR WINDOWS PLEASE ?! OR MAYBE YOU ARE UNDER LINUX AND YOU TROLL LIKE PALLAS Calm down mate, I'm just trying to help you  As you may already read on one of my previous answers, I'm an even poorer NVidia user who has to deal with some crappy 100 kH/s. That's because I don't have a .bin for the AMD GPUs. I could you only give one for the GTX960 (working with Win), but that won't help you. Do you have some software developing skills? Then you could debug wolf's miner with Visual Studio 2013. I'll currently installing VS2013 and I'll have a look at it. But as I don't have an AMD GPU, it would be very hard for me to track down the error. Another idea - What's happening when you start the miner and let it create a .bin file? Did you also copy the folder "kernel" to the miner? And on the "Algorithm" question you have to enter hmq1725. Let me know if this works. |
|
|
|
|
Show Posts
