|
fwiw; yesterday on a larger machine only got one payout, when its normally 2-3 a day.
Profitability was down for ~22 hours or so give or take.
|
|
|
|
Would you be able to ship this to Australia? There is no customs taxes or fees so you don't have to worry about that. Send me a PM if you are interested and tell me the shipping and insurance price.
Well; I could ship internationally.... I would need to figure out how much it would cost, and how big and heavy the package is. USPS only insures internationally up to $200 value; so It might be futile to do it, and rather expensive. Let me do some research within the next day or two, and Ill get back to ya. |
|
|
|
|
MAn, I picked the wrong time to take a few days away from forums.
Most info people have been requesting is in my batch link in my signature; how to normalize, etc... but looks like its all sorted now.
Still working on updates for my batch.
Ill probably integrate the core/clock modifications to the batch I see in the posts above me.
Will add some more convolution, but that's all right.
Right now I'm trying to get my "All batches in one" to work properly. Lots to figure out still.
|
|
|
|
 Ignore 82C as its put my card into thermal throttle; And I induced this by cramming a 960SSC inbetween the 980 and 1070.... it sits riiiiight up against the massive cooler of my 1070. I am just doing some tests of my new batch coding, and wanted all the cards in my main box for right now. Somehow MH/w is 4.5 through all this; temp, stock settings (no overclock, just fanspeed 100%). All 3 cards are at 27 intensity. 4.5 is pretty good for skien no? roughly equals 0.00001800 BTC/w/day... |
|
|
|
Does the unpaid balance ever get caught up?
Im up to 0.137BTC on unpaid over the week, but my balance to be paid out today is only up to 0.0211 so far today...seems like my unpaid balance is growing daily, while my balance to be paid is staying steady around $10/gpu.... little concerned
that is a total unpaid balance for the last 3 days. cause netko takes over 2.5 days to confirm now. yeah, you need to know if your mining long-confirm coins... also; maybe people aren't buying what was mostly mined ATM? Pay attention to the graph. You'll see the lower green full graph emulate what the top thin (blue?) line was when the coins were minted; with the difference in the green graph at the time block is found... ITs a lot easier to judge on coins less than 12Hours maturity to sale.... Crackfoo: Can you add the ability to see your payout graph in multiple scales with a dropdown box? I.E. 12Hr, 24Hr, 48Hr, 7 Days, 30 days. Would be nice to see the sawtooth patterns and profitability across more time span. |
|
|
|
|
beta update; much cleaner. Works for me, waiting for secondary feedback before replacing original code.
|
|
|
|
|
.... curious minerx,
Why is this being closed off? Too much hassle? I know you had access to many more different cards than I do, so I applaud the testing on each individual one when it was done. Also you provided a complete package with builds; something I have yet to do. I won't do that myself until I have a good repository to put the updated package. I don't want to use mega, or anything like that. I want my own location. I would use the same location that I host my VPN, but that could be troublesome for hundreds of people downloading an update; plus my use, on top of the use by the actual location itself...
I definitely know how much of a pain it is to keep up to task on new apps/algos/features. I am still trying to work out the kinks in the case/switch transposition to DOS commands for my new major batch update and haven't released any updates.... there is no easy way to do a "switch" case in dos it seems.
FWIW to the people on zpool; I will be making some major updates and continuing to support my original batch work if you have problems with this package.
|
|
|
|
even using the dmd-gr it rejects... I agree with this. I mined DMD-GR last year for quite some time.... never got any blocks, no credits.... If it were to ever get enabled, I would have a hefty share of the first block generated I would think, just because of that.. |
|
|
|
*Hopefully I chose the right section to post this* Model Number: E1793U-C STRIX-GTX980-DC2OC-4GD5 Condition: Excellent OEM Box: Yes OEM literature and driver disk: Yes This video card has served me well over the past year. Bought it new from Frys; and played games on it just about every day until I picked up a 1070. All the inbetween time, it has been mining as well. Never overclocked, always remained at the factory settings (factory OC edition). Re-pasted the heatsync about 4 months ago. Presently it's installed in one of my 2 card miners that I keep in my RV at the ranch; when sold, I will remove from the miner, clean up any dust, and package it in the OEM box as it originally came. I am clearing out my 9 series cards to make room here for some 1080ti's that have been purchased by a customer I host for.... I'll make more $$$ by populating the slots with his cards and taking my percentage split; so these cards regrettably must go. Shipping will most-likely be USPS. It has been (historically) the most reliable for me. My price will be $250 firm + $20 shipping. (Ill refund some shipping in the form of a BTC payment if it ends up being a lot less) Overseas these cards amazingly still sell for ~600-800USD. I assume it's the import fee/duty/tax. I sadly don't want to deal with the problems that may arise from doing an overseas sale; so US/Canada only please. Item will be insured and tracked. A one-cut video will be taken of me boxing it up and bringing it to the post office and dropped off to protect my ass if someone tries to rip me off. This action has already saved me from two people on ebay trying to rip me off. Will accept payment in BTC; or Cash if you live in California and can meet somewhere in the bay area.   **The EVGA GTX 960 SSC in the photo is also for sale; $120 firm as well. It was mainly used in a projection pc for live events/videomapping until I received it as a gift (he upgraded). It has only been in a miner for about 4 months. It never gets over 68C because of its location in the rack case, and it's power usage is only around 62% on the algo I have been running. No box/manuals/etc for this one.** |
|
|
|
Awesome work sir!! I tweaked the netReset.bat file to restart my native windows VPN using rasdial  powershell -Command "rasdial VPNNAME USERNAME PASSWORD" Now my mining system will only ever mine when my VPN is connected, and if the VPN fails it gets restarted  I tried to script this and it was very weird. When I coded the resharing of the internet, an adapter name that was not in my list of hardware was attached to the sharing and it needed a restart to get its info straight. Its not that simple as it is mentioned by the OP but still it is worth the try. cluit: Ill see if I can add a script section for you to check if the ethernet port is down, and if so, disable ICS until the port is up... would that work? But, see below first and try it; the static IP on the xbox will probably fix your woes. When I finally get to getting a good linux build on one of my cellular laptops, Ill be able to see if this whole issue with data dropping off is indeed linked to microsnot ICS. *to everyone*: if you ever use win ICS and remove an adaptor (say a USB one) there will be links left in the OS for that ICS connection.... Im wondering if that was your problem. Try naming the adaptor you wish to reset (the one bearing the internet connection to be shared) to something unique, and try again. For other issues I have been having, set static IP's and a known DNS in the adaptor properties for the device receiving ICS connections; I.E. Device 1 192.168.137.51 255.255.255.0 192.168.137.1 (I have a second 100/1000 port on my first machine accepting the ICS shared connection, so my connections are bridged so machine #2 gets this info: I.E. Device 2 192.168.137.61 255.255.255.0 192.168.137.1 dns 8.8.8.8/8.8.4.4) FYI, you can NOT use 2 tier ICS. I.E. Machine 1 with internet; using ICS to share to machine #2, which has ICS sharing to machine #3. This will NEVER work. you would need to set up your own standalone DHCP server and config to do NAT within NAT in windows. |
|
|
|
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings.  And somebody noticed the lack of standing/data...... Please explain your blind accusation.... in detail. I'd love to hear it. Why quoting me? I'm not accusing anyone. I get better earnings from zpool, which either means everyone else (including myself when I mine in specific currency) steals 20%, or that there are no missing 20%... the topic comes up on every page, it gets old. It was a followup to your post.... was relevant to quote it.... I'm on your side..... |
|
|
|
20% fee for auto exchange?
Sure, and nobody noticed 20% lower earnings. And somebody noticed the lack of standing/data...... Please explain your blind accusation.... in detail. I'd love to hear it. |
|
|
|
Could someone explain to me the difference between intensity and difficulty levels in the miners? I ask because i am trying to dial in my GPU's for the most profit/watt and when i was running skein 24/7 2 weeks ago i managed to dial it in at 6.2Mh/s per watt compared to 2.1Mh/s on OEM settings.. so literally 3x's the efficiency fine tuning it.. but after reading more into nemo's multi-algo when skein took a huge drop in profit last week and i very quickly found that the gpu settings for my stable skein mining was like 80% chance of crashing on other coins, so i have been fighting with them to fine a happy medium as i introduce more coins to the list to mine.. im out to 5 so far stable but i feel like this should be easier... for example i have lyra2v2 set to the lowest intensity setting 8 for ccmineralexa78 and if the difficulty number doesnt climb as high during mining the coin will mine all day 24/7, but when it jumps pass a certain point in difficulty the miner just goes into a GPU Miner error state and crashes...
So i am trying to understand more about the intensity vs difficulty levels as im a new miner still learning...
A tip for the multi-gpu miners, i found that running separate batch files for each card is WAY more stable that trying to group the settings together.. for example my center GPU's in my rig are able to mine skein at intensity of 27 only, but my outer colder ones can do as high as 30 intensity without ever crashing... so right now my setup is at its most stable condition running multiple Nemo-Miners in the background all running separate GPU's on different settings... it does confuse me when some will mine 1 coin and others mine another coin at the same exact moment... not exactly sure how the whole grabbing which one is most profitable thing works when im literally using the same computer mining these different batch files...
This gives me an idea to expand and have it apply nvidia profiles per algo.... This is an interesting task. would take a bit of end-user work to trim for their own systems when it comes down to it... but I believe I can add the functionality to change your OC settings automatically with the algo change. And I think I can do it dynamically based on what algo is mining.... (I think I can see the code in my head at this point) "intensity vs. difficulty" is surely not a thing. intensity is how many concurrent hashing threads your GPU is running; difficulty is the value of the result the GPU provides..... |
|
|
|
|
Updated code. Added counters and display for the data. Also streamlined and trimmed wait counters to a more respectable level.
Seems to keep my cellular connection in-check reliably.
Soon a proper shutdown step to openVPN will be coded in, but I am still working out the bugs.
More TBA.
|
|
|
|
With BTC transaction fees getting a little ridiculous. What are the chances getting paid in ETH?
I dont think theres code int he pool to handle it automatically... if we mined it (if it was possible) then that would be a different story... |
|
|
|
|
seems to be happening again for skien... did you do any recent changes or updates?
should be ~1Gh, seeing 490Mh...
|
|
|
|
|
well, if your machine is spitting out a million low value shares a minute, its going to report low hashrate..... are you using manual diff?
|
|
|
|
notice on balance graph how the pending total balance resumed higher.... This is a issue that arises; graphs get disrupted, but everything is still mining and working under the hood. |
|
|
|
(0.004*1000)-2%0.08=3.92mBTC
yup, pretty close. but that was 3.92 in the previous 24 hrs from that point in time. notice it fluxes.... up and down.
It's like the newspaper. Yesterdays news.
well, wrong... pool fee is 2%, coin2btc exchange fee is 2%, miner fee is 2.5%, formula for total fee is (1-(1-fee1))*(1-fee2)*...) 1-0.98*0.98*0.975=1-0.93639= wooping 6.361% yes; there are compounding fees; but; zpool picks up tx fees. If the exchange used is yobit; they only charge a .2% fee on exchanges; and their tx fee is .0005..... not sure if this comes out of the sum or not.... What is this "miner fee" you speak of? zpool only takes a flat 2%........ looks like you are counting this twice somehow. |
|
|
|
|
im not sure what risers you are using, but I have success with old ribbon style; molex 4 pin, sata power, and PCIE power versions. I own all of em....
I once thought I had bad risers, but actually it ended up being the bottom +12X pin grounding out to the casing bracket that was supporting them..... so it was my fault in the end and I had to replace traces on 5 risers which work fine still......
FYI; they need a power cable to the riser... this is a must-do.
To be absolutely sure: unplug all GPU; plug a riser into the main 16X slot; and plug the main gpu into that. boot up with a monitor plugged into that GPU and no other GPU present; should boot......
|
|
|
|
|
Show Posts
