The proof is in the math.
Do the math... prove me wrong if you think you can.
|
|
|
Go away troll
I'm not trolling. I'm pointing out the facts. If you don't like it, don't read it. I'm only trying to save people the time they would waste at these other pools that have a broken payout system. I already have over 3000pi unconfirmed on hashing.at... at 800kh/s, whereas people are mining at 10+MH/s and barely making an estimated 80pi per day at other pools. If that's the case, then those pools have the WRONG SYSTEM, and SERIOUSLY need to get ahold of the DEV... if that's NOT the case, and hashing.at has the wrong system... then THEY need to get ahold of the DEV. HOWEVER, doing the math, of each block putting out 314,159pi, nobody should be making 80pi per day until LATE in the game... not on LAUNCH day.
|
|
|
Houston we have a problem ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Diff 409 is not compatible with whole network hashrate.. Agreed.What's wrong with this coin.I won't lose electricity to mine this shit. This is what is going wrong : Pools are reporting correctly. If you're in a pool that recently found a block it will show a decent coin/day rate basing its calculation off the information it has.
The coin is broken. Without KGW in place, it has at re-target of 1 block. The 1 block re-target non KGW is very flawed. If you get lucky and get a coin really quickly it will whammy you with what we have right now which is 25 min between blocks. Once the next block gets found (during the 25 min window) it will set the difficulty really low to make up for the last block. Then that one gets picked up too quickly and back we are again at the 25 min re-target.
Each pool depending on if they found a block recently will change their estimates on how many coins you can mine in a day. If they found one recently you have a higher rate, if you haven't you get a lower rate.
All simple calculations. The coin will need a fork to change the 1 target to at least 10 until KGW is implemented
No, your pools are NOT reporting correctly. See the given reward for each block as it sits... then look at your pool stats per-user... and tell me that it's reporting correctly. So far, Hashing.at is the ONLY pool reporting correctly. Do the math.
|
|
|
Your payout system is broken too.
|
|
|
If you need a reliable pool that is immune to DDOS attacks ... here you go ... What he said.
|
|
|
Pool? No, the coin is broken. KGW will kick in at block 35000 and until then we have traditional retarget every block, looking hack 4 blocks. Very fragile, someone gets lucky to compute a block in fraction of time and the next one is a block with diff sky high ...
No... your brain is broken. Seriously man... with as many pi that come out per block... and someone with 16MH/s is only making 81pi per day? That's the POOL being broken, not the coin, when other pools are reporting WAY better payout results for lower hash-rates. Sorry... but until you fully understand how the system works, I suggest you close your mouth before you insert foot.
|
|
|
Reward System: Full Stratum/Vardiff system with Prop. Reward System: Full Stratum/Vardiff system with PROP Server Location: Europe / America Pro Hardware: Connections: 10 gigabit network hypervisor/storage. Direct connection to AIMX, MSX Storage: Fast ZFS based environment with SSD cache and 32 disks. CPU: Xeon 64bit / 16 powerful CPU cores Ram: 128 GB RAM. Security: Two different geo-locations Hot wallets (primary and instant back-up). Offline secured cold Wallet. Automated back-ups and warning system for operators. Ddos protecion. Your pool is broken too.
|
|
|
Again, see my previous post. Your pool is BROKEN. Fix it so people can mine there and ACTUALLY GET PAID... sheesh.
|
|
|
DO NOT MINE AT SUMPOOL! Their pool is EXTREMELY BROKEN. The fastest miner there is mining at 16MH/s... and only making 87pi per day on that pool. At http://pi.hashing.at, I'm mining at 800KH/s, and already made over 1000pi in under an hour. The fastest miner there is mining at 95MH/s (obviously someone with a large farm in his basement), and making over 3,000,000pi per day! But to put it in perspective, there is a miner with 11MH/s power over there making over 300,000pi per day. SUMPOOL IS SUMBROKEN.
|
|
|
GPU Miner by girino, NEW VERSION RELEASED - Build 8This time my focus was on networking, stability and 32 bits systems. No more crashes, works on 64 and 32 bits, linux and windows! The networking code from ypool's latest xptminer was merged back. Several changes and tests were made to ensure stability (no more "0kh/s" after some hours, no more closing on network disconnect or server down). Faster than ever, and two new hidden options: -s to set the step size (in powers of 2, defaults to 2^20), and -a to set variations on algorithm. Currently supports "-a 1" for lookup tables in constant memory and "-a 2" (default) for tables in global memory. -a 2 is faster in most systems. The code for metis was reverted to a previous version since it is 2x slower on some NVidia GPUs. Binaries and code available, as always, on the links above. Source code is available at: https://github.com/girino/xptMinerand Binaries (for windows only at present, will add linux later tonight) https://www.dropbox.com/sh/2wv2awwgebpdo0m/STzOU5tlXaEnjoy. Will not allow me to initiate both cards. Will only initiate 1 card. I tried copying the example.bat and altering -d 0 to -d 1... and it still initializes card 0. Help? Also... whenever it closes... it crashes my nvidia display driver. to initiate both cards, use -d 0,1 girino, it will not let me use that. When I do, it says "-d out of range" or something to that effect. It will not do it AT ALL.
|
|
|
For those who are having problems with your wallet syncing with the network, follow these steps. Go into your appdata folder, backup your stabilityshares.conf, and wallet.dat. If you do not have a stabilityshares.conf file, then make one. - create a new text document
- Copy and paste the following:
listen=1 daemon=1 server=1 rpcuser=xssuser rpcpassword=stability123 rpcport=7712 port=7711 addnode=80.112.144.84 addnode=82.139.127.205 addnode=23.253.82.83 addnode=27.33.1.58 addnode=87.147.43.53 addnode=174.108.122.202 addnode=204.195.130.236 addnode=92.55.41.212 addnode=88.127.170.75 addnode=94.23.196.92 - Save as stabilityshares.conf (as all file-types) **MAKE SURE YOU HAVE CHANGED IT FROM A .TXT FILE TO A .CONF FILE OR IT WILL NOT WORK.
- Now, delete everything in your wallet EXCEPT for stabilityshares.conf and wallet.dat (make sure you backed those up)
- Run your wallet now, and it should sync like greased lightning.
|
|
|
GPU Miner by girino, NEW VERSION RELEASED - Build 8This time my focus was on networking, stability and 32 bits systems. No more crashes, works on 64 and 32 bits, linux and windows! The networking code from ypool's latest xptminer was merged back. Several changes and tests were made to ensure stability (no more "0kh/s" after some hours, no more closing on network disconnect or server down). Faster than ever, and two new hidden options: -s to set the step size (in powers of 2, defaults to 2^20), and -a to set variations on algorithm. Currently supports "-a 1" for lookup tables in constant memory and "-a 2" (default) for tables in global memory. -a 2 is faster in most systems. The code for metis was reverted to a previous version since it is 2x slower on some NVidia GPUs. Binaries and code available, as always, on the links above. Source code is available at: https://github.com/girino/xptMinerand Binaries (for windows only at present, will add linux later tonight) https://www.dropbox.com/sh/2wv2awwgebpdo0m/STzOU5tlXaEnjoy. Will not allow me to initiate both cards. Will only initiate 1 card. I tried copying the example.bat and altering -d 0 to -d 1... and it still initializes card 0. Help? Also... whenever it closes... it crashes my nvidia display driver.
|
|
|
Hey Feeleep,
What's with this heinous difficulty on the darkcoin pool?
My worker is at 2,048 difficulty, when the network difficulty is less than 300?
It keeps dropping my performance to under 1MH/s, when I am mining at over 2MH/s.
|
|
|
What the hell is going on with your site? I was mining on your darkcoin pool, and now I can't login, it can't find my username, or anything.
I had almost 2 darkcoin in my account.
Are you guys responsible, or are you under attack?
|
|
|
Dear, Doge Fanboys and cheerleaders,
Your crappy shitcoin is nothing but a crappy clone of any one of the 100's of other scrypt clones with an icon as it's only unique feature and redeeming quality.. which is just a picture some guy found online and used. The dev / douche aka: coin cloner, could not even be bothered to create a new meme.jpg for his Coingen coin lol
i hope anyone supporting this coin gets cleaned out and loses all their money bad !
Doge coin is a scammy crap clone coin that is damaging to Bitcoin and the entire Altcoin scene. When major news outlets online report on Bitcoin news and they start including news about Doge it make Bitcoin look bad.. i can see clearly people who are not even in crypto are disgusted by this crap scam coin. Never mind the guys like me who have been at it for a while and watched many other shitcoins like this come and go..
The only reason it has gotten popular is because noobs that showed up late to the Altcoin game decided they would FLASH MINE this coin.. greedy stupid noobs are the problem and i kinda wish Bitcoin never exploded in popularity sometimes.
The intelligence level of Doge supporters is at best.. retarded. They are too stupid to realize that their support of Doge and their damaging antics are undermining the very thing giving their shit coin any value at all. Which is the ability to dump the shit coin for a REAL currency such as Bitcoin.. you make Bitcoin look bad by shouting Doge all over the web.. while making Bitcoin look bad while in turn making Doge look bad and worth less.. your smart guys lol
I just feel sorry for all the dev's out there that had gone to great lengths to create and support a REAL honest alternative to Bitcoin. The lime light is stolen from them at every turn because of mouthy retard noobs screeching Doge and Much yes 'tard crap..
And yes it is in fact possible to trade and mine a coin AND not support it and make money of it.. after all you might as well if the stupid dumpy scamcoin exchanges are going to add the coin then ya go for it ..might as well make a few $$ with it. BUT You don't have to run around like a moron across the web screaming Doge every chance you get trying to lure new people into a ponzi scheme.
Never mind the long term implications of this clone coin crap.. you idiots are doing REAL supporters a dis-service and i am going to make sure your shitty little scam coin goes nowhere by pointing to the new people how utterly scammy and useless Doge coin is.
My advice to new users is do a bit of research and find one of the other alternative crypto-currencies to get involved with that offer something unique and have a real dev team with a real road map of goals.. just look for them there are many.
Someone is a bit mad aren't they? 1. Dogecoin was ORIGINALLY created to be a joke... but it took an unexpected turn when people actually started supporting it. 2. You are probably just pissed because doge hit 0.00000300 last week... and you missed out. 3. You really need to start an argument with being as professional as possible to have people even BEGIN to take you seriously. I mean... I read the first few sentences... and I almost died laughing. If you want to see a REAL alternative coin that isn't just a clone... how about you get off your high-horse, learn how to code... and make one yourself. It's REALLY not as easy as you think. I mean... seriously... what did you think it would be like? Boning your mom? **EDIT** Oh... and don't get me started on your punctuation and spelling... just saying... get a dictionary.
|
|
|
HEY DEV... WTF MAN... YOU DIE OR SOMETHING?
Wake up and get to work. Ask for help if you need it. Don't just throw a coin out there for people to mine... then run away. It's a waste of the community's time.
|
|
|
Has anyone else had any problems? I withdrew around 16000 DOGE yesterday at 8pm and 18 hours later it's still showing as pending. I confirmed the withdrawal straight away via email yesterday. Cryptsy really does take the piss sometimes. I withdrew 100000 mooncoin at the same time which was sent through to me almost straight away.
Funny how the falling price coins get sent out faster than the coins that are rising in value.
If you haven't been paying attention to what BigVern is posting on Twitter, they just did a wallet move. If you're on the old wallet, it will take a minute. After you get your withdrawal, then generate a new deposit address, and you'll be moved to the new wallet, it will be lightning fast.
|
|
|
![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) OH YOU ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I wonder how it went down? I know there are a few people out there who are butt-hurt due to the volume of miners that are on coinpool.pl, they're pissed about it like you're trying to steal it all or something. Not their fault that people just seem to flock to the most popular pool out there. You just happened to be one of the first ones set up... and everyone who was mining with you that got into qrk just said... *jump* I am not stealing anything (and even not trying). But I am trying to provide honest, stable pools - people decide where to mine ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) That's exactly what I was getting at my friend.
|
|
|
![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) OH YOU ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I wonder how it went down? I know there are a few people out there who are butt-hurt due to the volume of miners that are on coinpool.pl, they're pissed about it like you're trying to steal it all or something. Not their fault that people just seem to flock to the most popular pool out there. You just happened to be one of the first ones set up... and everyone who was mining with you that got into qrk just said... *jump*
|
|
|
|