Hi, thanks for your review Philipma But, litle problem, i have take voltage control with sucess, ok, but the firmware want monitoring hashrate, is hashrate is under 90% than target, this firmware want set more power (voltage), but the problem, is rebooting all hashboard (no rebooting miner), and my mod RE set custom voltage, is possible for you to confirm this on your kernel log , is the reason why you have "drop" hash on your average, and rejected share (rejected at restart hashboard) ... 1680mv is high downvoltage ... for resolve this problem, i want you set more, for exemple, 1690mv, if your hashrate, after arround 10min, is under target (on kernel log), please set more, and so on. By this methode, you avoid the restart all hashboard, the firmware don't want rebooting, give more average (rebooting fact drop average), and lower rejected . while waiting for my new version for by pass this, and make FULL fixed mod
|
|
|
I don't know how Kano blocks Custom Firmware, but I know mine is basically original, if you could test, it would have been great it would only be an argument / proof, that I didn't change the fundamentals code
|
|
|
Hi all, As far as I'm concerned, concerning my firmwares, I only spent the boot sequence in FIXED, the code is present, I only activated it,
If I understand correctly, in theory, I could not connect to the kano pool? because Kano blocks custom? I understand well ?
If so, I could prove it, that my firmware is basically "original" if I connect to the Kano pool? you confirm me?
|
|
|
Hello everyone, I made S17e Custom Firmware, installation is now free and available to everyone!Edited, now ready for T17 / T17+ / T17e / S17 / S17Pro / S17E / S17+ with lowered fee ! -----FIRST custom firmware for the Antminer S17e------ Custom Freq : From 30TH, up to 80TH and more (runs in all conditions) - Custom Voltage : From 1500mV to 2050mV - Downclock up to 35 W/TH or better efficiency - Monitoring Voltage / Freq ratio for best efficiency - Fan fixed / auto - Signature disabled / You can restore original firmware at any point - Performance and Efficiency + 15-30% (all ASICs are different) - Working perfectly on all pool, original cgminer - Small DevFee 2% 0.9% ,
OVERCLOCK IS AT YOUR OWN RISK !!!This picture are no fees, is normal, is beta before releasing. -------------------------------------------FREE DOWNLOAD--------------------------------------------Instruction if your miner is locked by original firmware--- 1 - Power down your miner 2 - Format your micro SD Card as FAT32 3 - Download this file ( SDX17X ) - intermediate firmware (needed to unlock) 4 - Unzip the files, and paste all unzipped files on your SD Card 5 - Insert SD Card on miner 6 - Power on, and wait until GREEN and RED light start flashing then power down miner 7 - Remove SD Card and Power on the miner 8 - Now flash Custom S17e Frimware ( https://discord.gg/JdQJ77X ) -----PS : Miner will change IP address, it's normal-----
--- Contact : https://discord.gg/JdQJ77X or Telegram Djay firmwares ----------------------------------------------FREE DOWNLOAD-----------------------------------------Link : https://www.djayos.com------------------------------------------------------------------------------------------------------------------------------------------------ I leave the pleasure to Favebook to make review about my firmware (that I thank very much for giving me access to his miner for all the tests!) Contains no malware of course, it is original firmware but patched Thank you for your trust.
|
|
|
Thanks Yes of corse, i have promised full free for him , at this time, his miner run with my custom "beta" , full free of corse :p At this time, i don't know how, but "miner configuration page" don't work ... no page ... i working actually for this . thanks all for support me !!!
|
|
|
Hi , i have take control with sucess : -Voltage -Frequency -Fan -Remove signature -Litle tweak for assitance of parameter (same on my S9K mod) PS : i have find tester (thanks !!!) , he should post these results soon
|
|
|
Thanks i assure to you, no problem with me for the future, i prefer sold this by "licence" without any fee . If you are ok, pm me for join me on discord, i need you boot your miner with SDCARD for unlock this by "mptestfirmware" , and i need access by teamviewer at ONLY this miner, if you want, monitor me, no problem
|
|
|
Link for S17E Final Version : https://bitcointalk.org/index.php?topic=5265677.msg54901808#msg54901808Hi all, i have developed custom firmware for all T17 / T17+ / S17 / S17pro /S17+ with success ... but i don't have T17E / S17E on my hand, i search on guy to agree for give me access with teamviewer for test, if success, i ofer my custom firmware for him thanks
|
|
|
6 please
|
|
|
This miner have a problem ... 0.3HW is BIG !!!
so, don't send full stat, don't help ... is easy ? lol
|
|
|
very strange... please give me "full" miner stat image. If your miner have problem before, my mod not solve this...
You have installed on S9K ? my mod is only compatible with S9K and maybe S9SE , any other miners...
|
|
|
Hi, i have re uploded files, please leave comment
|
|
|
i thinks yes ... i have tested S9SE firmware on S9K with no problem ... so you don't take a risk if you test it ... if don't work, just make my "tutorial" and flash your original S9SE firmware
|
|
|
Bump
You don't have tested my mod on your own S9 ?
|
|
|
Please try yo change your "general" password ! on all bitmain device original password is : User : root Pass : root Pass ssh : admin if you change the password to "TESTING" ssh password change , so : User : root pass : TESTING pss ssh : TESTING leave me your comment
|
|
|
so confusing ! For me, my biggest mistake.... i have buying two D3 ... so stupide !!! lol , lost all my money...
|
|
|
i have verified on my S9 (full unlocked with stock firmware 2019), and contain all this files to i thinks the files are not importance lol
|
|
|
Any comment ? I have forget to say is full free, no dev fee ? no modified firmware Just add SSH files for unlock and unlock fan control on minerconfiguration.cgi Leave comment
|
|
|
i have some problem ... i have take this command "dd if=initramfs.bin.SD of=initramfs.gz bs=1 skip=64" and modifi this for compatibilité on "bitmain" firmware, extract, mount, modify permission for edit files, rebuild all files ok ! So, repack all files on flashable files "***.TAR.GZ", but not work ... i have needed modify runme.sh files for compatibility and force miner to flash all files !
|
|
|
|