Thanks again for your help  so, i have all succes but the error FW is mini ... I have just by pass all error on runme.sh for force miner to flash all files, and now, is working good !! |
|
|
|
Hi all, i'm happy to share my moded files with all ! Please read all before installing !!! Feature : -Stock firmware
-SSH unlocked
-Fan control unlocked
-LPM unlocked (but not working on this miner)
-Statut miner page include my mod for monitoring healt miner  For install : 1 : just try upgrade this ! if not work, jump to "2" 2 : Power off miner 3 : Make all this file on SD card and inser on miner (SD Unlocker 17 Family) ----- https://www.djayos.com -----4 : WARNING : this files is taken on T17/S17 firmware, please unplug all data cable on all hashboard before power on miner ! (just for inssurance for save hashboard eprom probably)
5 : power on miner, and wait GREEN and RED led flashing 6 : power off miner and remove sd card 7 : power on miner , and flash my firmware ! ----- ask me -----8 : If all is ok, power off miner, plug all data cable again, and POWER ON !!! Enjoy !!!  If you want donate, do not hesitate !!! lol  |
|
|
|
I have succes repacked firmware with my modified files ! but ... problem ... i have boot my miner by SD card (contain MP Test firmware for allow install any firmware you want) ... i flash my repacked firmware, but "CANNOT VERIFY FW!!!" ... Any idea ? i have just repacked uramdisk.image.gz files by your methode with succes on linux |
|
|
|
thanks, i have other methode for unpacking working with succes... i'm interessed by your methode for repack ! is possible you details all command for repack all ? So , the signature is not needed, just run miner with sdcard before, and after flash any firmware you want |
|
|
|
|
hi, i'm interessed by S9 and (or) psu for parts ...
what your price for this ? you accept escrow ? or paypal ?
thanks.
|
|
|
|
For unlock ssh , the miner need have this files : -dropbear -dropbear_rsa_host_key -lighttpd-htdigest.user and this code on bitmainer_setup.sh for unlock this at booting : ###########################
# dropbear
NO_START=0
#if [ ! -f /config/dropbear ] ; then
# echo NO_START=1 > /config/dropbear
#else
# rm /config/dropbear
# sync
# echo NO_START=1 > /config/dropbear
#fi
echo NO_START=1 > /config/dropbear
cp /config/dropbear /etc/default/dropbear
########################### if i succes repack all files on flashable firmware, i want modifi all i want !!! so is the reason i working for this at this time i'm ok for all modifi, extract, mod, but not repack all  |
|
|
|
i win ? |
|
|
|
|
Great ! if is possible, connect your miner on SSH , and extract the files :
usr/bin/cgminer
usr/bin/cgminer-api
usr/bin/bmminer
and past files here... very utile for all people, by this files, is good methode for replace this on new miner for convert this on fixed frequency !
|
|
|
|
|
No , the fan on psu S19 is same on APW3, so, no turbo noise :p lol
|
|
|
|
hi, i don't know ... at this time i'm ok for : Extract all files by ssh (easy for all) Extract all files on firmware, exemple, downloaded on bitmain.com At this time, the best methode is extract only "cgminer" and "cgminer-api" (taken on fixed freq firmware) and past on new miner if ssh is actived i have my own moded files for T17 / T17+ and other ... at this time i don't know how to repack all files for make a firmware flashable ... i working for this if you know how to, please tell me ! :p if past modified files miner, working is ok, but one problem, if you reboot the miner, all original files are restored ... |
|
|
|
|
Hi, i have recevied my V9 ... test it, and run perfect ! no rejected ... sorry man ...
i have overclocked this at 825mhz without any problems, make 5.47TH
|
|
|
|
6 - thierry4wd Thanks !!! |
|
|
|
hum ... try change 1 to 4 just for test ... on my idea ... bitmain have include Asicboost on firmware, but, V9 have "S7" hashboard reconditioned ... and not compatible ... "multi-version" : "1" (no asicboost) "multi-version" : "4" (asicboost actived) just try ... coming soon i receved one V9 model ... i have only buy this for psu lol , but i run it, if i have same problem, i work for this for try discover the problem |
|
|
|
Thanks, add this line ""multi-version" : "1"" so ,
{
"pools" : [
{
"url" : "firstpool.com:3333",
"user" : "3SsoMeBtCaddRe3S4pY2HbYoX5PnhGuSt3s.Worker1",
"pass" : "x"
},
{
"url" : "stratum+tcp://2ndpool.com.com:3333",
"user" : "satoshi.1",
"pass" : "123456"
},
{
"url" : "stratum+tcp://somepool.com:1234",
"user" : "z9z9z",
"pass" : "x"
}
]
,
"api-listen" : true,
"api-network" : true,
"api-groups" : "A:stats:pools:devs:summary:version",
"api-allow" : "A:0/0,W:*",
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "50",
"bitmain-use-vil" : true,
"bitmain-freq" : "533",
"multi-version" : "1"
}
modifi your cgminer.conf, and reboot miner (no apply on config webgui for old the new settings) ... just try it |
|
|
|
Hum ... i remember i have same problem on time i hack firmware S9 / T9+ ... mayby i have one idea why is the problem ! i need more information ... you have SSH acces ? if not, try to unlock this with Anwesome miner (is easy) ... on time is ok, please paste me your "cgminer.conf" or 'bmminer.conf" , please send all in here, (if you want mask your pool/username) ... i need to have this for understand Ps : if you have "backup" on your webgui , please make this and paste this file on my pm (if you want don't share all information for all) |
|
|
|
Hi , thanks with pleasure I have updated the code, i find litle "bug" if fan is under 4000tr showing error, is not an error if you run in cold temp, i have set this at lower fan speed (1600tr) i have change visual for better cleary and i have optimised the calcul of hashrate, original is not "best" true .  |
|
|
|
Hi all, i have make (take on mp test firmware) litle tweak for monitoring value, and i have modified this for more compatibility and english ... this is util for validate your value (Voltage and Freq tuning) You just need past this code on your miner at "www/pages/cgi-bin/miner_stats.html" and replace this. (Need SSH unlocked). https://pastebin.com/1a9xE7uGExemple : Monitoring in progress  Exemple : if you need more voltage !  Exemple : Test passed, your freq and voltage is ok  This mod monitoring HW number, Fan speed, GH speed according to freq ... if is one is not on tolerence, showing error I thinks this mod is not bad for good tweak T17 ... i don't have tested on S17 but i thinks is working to ! (idealGH = frequency * 675 * asic_count * miner_count * 0.98 / 1000;) With pleasure |
|
|
|
hi, sorry i don't have a proof i don't have this on my hand for make power mesurement ... for proof just test my mod on all firmware, wattmeter is only estimation, not look the temp for make value, on the S9 an T9+ is very sensitive by temp / power ... in absolut, the miners don't have real wattmeter physical But , good luck with your work |
|
|
|
Hi , T9 + jusqu'à 100w / TH; ? Is not good value, i have runned all my T9+ at arround 90w / th and with my mod (free release) At this time, why need to paying dev fee ? custom firmware for S9 and T9+ are releasing for totaly free (brain os, custom files, bitmain) . |
|
|
|
|
Show Posts
