Did not work, I tried from Bittrex but "Invalid"

Great mess, balance now shows more than 19000, but I only received 10300 since the begining of test.

I will erase current install and Roaming directory and try again from clean install.

Done :

{
"mismatched spent coins" : 7,
"amount affected by repair" : 10150.00000000
}

I reboot

This fucking wrong stealth address is moving randomly between the addresses I created in Receive coins ! Sometime when I try to change a label (whiwh changes the lable of an other address...) or not.

I succed one time to send CLoak with activated PoSA (2/2) to Mstang83 (did you recive them ?), after that when I try again to Yackballz it fails, as shown in PoSA3 Stats tabs. I will try to send you some again, with and without PoSA.

Ho, and in Address book, Edit label and Delete an address don't work, but after rebbot, the deleted address was gone. So I think the Edit works after reboot so.

Yackballz, after rebooting, I tried to send you 600 Cloak with activated PoSA (2/2).
Doesn't show in transactions list, but in PoSA3 Stats tab, it displays as Failed.
The 100 I sent you regular way displays in Transactions, but 0 confirmations on 4, did you receive them ?

Mstang83 : did you receive the 2 Cloak I sent you  with activated PoSA (2/2) ? In PoSA3 Stats tab, it displays as Complete, but Transaction tab 0 on 4 confirmations.

Yackballz : I received your 10000, 25 confirmations. Before rebooting, they were in my wallet balance Overview, after rebooting my balance was without your 10000, they displayed in PoSA processing, and now a minute ago they went bak in Balance of wallet...

I still have in Overview 22.656 CLOAK Unconfrimed, don't know what it is...

There is definitely a problem with addresses labels : when I do Edit label in Receive coins tab, it changes the label of the address below the line I selected.
And the wrong stealth address 1Wh4bh came back from nowhere, replacing the stealth address of a recently created stealth address (that shwoed only and correctly after a reboot, but now wrong after a second reboot)

Sorry to say but this RC1 seems more to be a beta or even an alpha for me. But I understand it is a very hard work to develop. Many thanks.

I sent you 100 cloak the normal way
After, I tried to send you 50 with activated PoSA (2/2) but seems that the wallet doesn't save the transaction, it shows nowhere. I tried twice.
I will reboot and try again.

Another bug : in Send coins, wallet ballance is not the same as  Overview balance (the correct one), in Send, it show the balance before previous receival (that has 18 confirmations).

If someone couls sent me some cloak :
- to regular address n2eQw2incAu3WTqr8E2wcE8vX5GBq4tt7p
- to regular address n2eQw2incAu3WTqr8E2wcE8vX5GBq4tt7p with activated PoSA (2/2)
- to stealth address smYpAjKwpJ6F7WtwgqH6BPETaysakhUQHggfYmPvJS4TWbeJC3WWJey9h65JBzwGnQuYqSrWi7mwTdg 4DRaZ6jcDyXZwzr64nQJYrC
- to stealth address smYpAjKwpJ6F7WtwgqH6BPETaysakhUQHggfYmPvJS4TWbeJC3WWJey9h65JBzwGnQuYqSrWi7mwTdg 4DRaZ6jcDyXZwzr64nQJYrC  with activated PoSA (2/2)

I will tell you the results...

Er, I tried to paste my stealth address in Pay to field of Send coin tab, the wallet cuts the address ! Too long ? So, no way to send to a stealth address now

Thanks. Working together can help.

OK, some report after letting the program run all this night, I just woke up.

Wallet is encrypted and unlocked for mining and cloaking.

I received 100 + 200 Cloaks on a regular address, thanks. The column Type only shows "Received with" and no other info, I must ask transaction details to see my address and the label.

In Transaction tab, it also shows a line telling I "received" 0 Cloak on what it could be a stealth address (?) I gave here sooner in this forum (Type column : "PoSA3" shown). If I ask transaction details :

Status: 82 confirmations
Date: 16-07-15 07:57
Debit: -100.00 CLOAK
Debit: -200.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Credit: 25.00 CLOAK
Net amount: 0.00 CLOAK
Transaction ID: e3e920a96abbffb8f4adb350a8e076719f1f534bc027834eb6e48c896e3ebecb

That's strange, as it's the sum of the Cloaks I received sooner, but negative.

I sent 2 Cloak to someboby address with PoSA (2/2) activated. 30 minute after, still not yet any confirmation.

After that, I checked the status bar of RC1 :
- Accepted 8 Cloaking requests
- Signed 1 cloaking requests
- Refused to sign 0 Cloaking requests
- 8 Cloaking requests have timed out

In the Address book, there is only the address of the 2 Cloak sent, and the first stealth address I created : 1Wh4bh, that seems a wrong address, and the label is wrong too, it's not the one I wrote on creating this first stealth address.
I get this 1Wh4bh stealth address the first time I launched the RC1, after rebooting RC1, in Receive coins, it became smYpAjKwpJ6F7WtwgqH6BPETaysakhUQHggfYmPvJS4TWbeJC3WWJey9h65JBzwGnQuYqSrWi7mwTdg 4DRaZ6jcDyXZwzr64nQJYrC instead of 1Wh4bh, but keeping the original label.

Now, as previous, I can create in Receive coins new regular addresses and they show in list.
I can create stealth addresses but no one new stealth addresses show in list.

In Overview, the balance of the wallet is strange : I only received 100 + 200 Cloak, but balance displays 275 Cloak (0 PoSA processing, 0 Stake, 22.656 Unconfirmed)

Now I Exit the RC1 and reboot it.

The previous stealth addresses I created before rebooting now show in the addresses list of Receive coin tab.
I can create regular adresses and they display in list.
I can create stealth addresses but they don't display in list, I assume they will after reboot.

Now, in Address book, the previous first wrong 1Wh4bh stealth address still shows, but with a new/other label !!! This label is the label of the last stealth address I created before reboot.

In Address book, Edit label and Delete an address don't work.
The Show QR code has "bitcoin:" in text before address.

In Receive coins, Edit label for an address doesn't work.
The Show QR code has "bitcoin:" in text before address.

55 minutes after sending 2 cloak to somebody (see above), still 0 confirmation on 4, PoSA3.

Status bar :
- Accepted 1 Cloaking requests
- Signed 0 cloaking requests
- Refused to sign 0 Cloaking requests
- 2 Cloaking requests have timed out
- Connected, 8 anons, 0 cloakings
- Cloak Shield active
- 2 active connexions to network
- wallet up to date

OK, I think this bug report is finished for now. You can send me 100000 Cloak to BsuqJj7rW89j7uXvLoU4VZu2hzjNFbfURN to thank me for this wooonderful report    (no testnet address, real net working Cloak wallet 

Hope it can help ! Thanks for your effort folks.

Sent you 2 Cloak with POSA (2/2)

Received coins !
Bug :
The first stealth address I created gave me "1Wh4bh" as address. After that, impossible to create a new stealth address.
I rebooted the wallet, and the first stealth address I created is now "smYpAjKwpJ6F7WtwgqH6BPETaysakhUQHggfYmPvJS4TWbeJC3WWJey9h65JBzwGnQuYqSrWi7mwTdg 4DRaZ6jcDyXZwzr64nQJYrC"
Impossible to create new stealth addresses. Possible to create new regular adresses.
After second reboot : the new stealth adresses created before now appear in the list.

Thanks !

Nothing arrived yet at 9h24 PM... Wallet is up to date, downloaded 712 blocks, 2 active connexions to network, Cloak Shield active, 13 anon connected, 0 cloakings,

Once coins arrived, what can we do to help ? Tell me what transfert, things or settings you would like I try in the RC1 wallet...

OK, thanks

Normal address n2eQw2incAu3WTqr8E2wcE8vX5GBq4tt7p

Stealth address 1Wh4bh

So, we should let the program run the maximum time online for your to make your tests, right ?

Thanks !!!

Hi, I tried to send some Cloak from Bittrex to the new RC1 wallet, but Bittrex tells me statuts "Invalid" in the Pending withdrawals window... "The address you submitted is not valid for the CLOAK network. Cancel this withdrawal and resubmit it."

How can we send some Cloak to the wallet for testing, please ?

Thanks, good job !

Yes, sorry for the pressure, I just wanted to now... I must tell that I had set an alarm on my smartphone to be sure not to miss the launch of new wallet and try it as soon as possible :-)

Many thanks to the devs for all the work !

Maybe a silly question, now : if I replicate my Cloak wallet install on several computers (blockchain, wallet, all files...) and I run them simultaneously with mining, will I get more mining reward ? Sorry, I just ask :-)

What kind of "small delay", please ?  
Hours ? Days ?? Weeks !?? Months !!???  

I really thank a lot all the people working hard on this great free software.

Thank you

As I don't know how to build the version mentioned in this link, I will wait until next release, so...   

Hi

After updating Armory from 0.92.3 to 0.93 with the official Armory download link, Armory crashes and shut down after showing this message box :



There is something weird : in About, it shows as a beta, don't know if normal :



I installed the previous and the current version in D:\Program Files (x86)\Armory
And database is located in D:\Program Files (x86)\Armorydatabase\Roaming\Bitcoin
The shortcut to launch Armory is "D:\Program Files (x86)\Armory\ArmoryQt.exe" --dbdir="D:\Program Files (x86)\Armorydatabase\Roaming\Bitcoin"





And Armory config is



It worked fine with previous 0.92.3 version...

After updating, Armory downloaded again from 0 the entire blockchain and finished it (database directory is 61,2 Gb big), but then it began to show me the error message box and shut down...

Don't understand, could somebody help me please ?

Many thanks !!!

I confirm it works for me ! FINALLY ! :-)

Thanks !!!

So by me, see my post above yours...