seven

1. I was worried that 4gb ram could have issues  so I upgrade to 8gb stick.

The mobo only has 1 slot and it is laptop sized ram.  Ddr3l. Only goes to 8gb

2. The case is fairly sturdy and uses only Phillips screws.

3. It does show a screen American mega trends then the win 10 sign in reads pandaminer but there is a script that signs you in to the normal screen where you can enter a mining folder.

4. The small button needs a tool to press a clumsy person could press it hard and break it.
It could be bypassed if you break it.

5.       Psu
        Pandaminer
        Pandaminer.

On a shelf would be easy you need a 20-24 inch shelf
10 units on a five shelf rack.

The method below may not work
P p
A a
N n
D d
A a
M m
I I
N n
E e
R r

6 do not know AMD drivers

7 so far clay 91 and clay 93 and eth 7.6

I need to fully build clay 93 on a second pc. Then put it,on a USB stick then move the stick to the pandaminer and it works that way.


Since I am not the best software guy  I won't push  until I have a working clone of the oem msata.

then If I brick the clone I still have the oem.

Later in the week.

I want to run eth for three days in a row.

It does run hotter so I want to be sure it can handle hot ambient room temp of 96f.

As my garage is in the mid nineties .


I ordered 2 of these fans from newegg .

 I think they will work  and be quieter.


http://www.newegg.com/Product/Product.aspx?Item=N82E16835132031&cm_re=BGEARS_B-PWM_80MM-_-35-132-031-_-Product


not going for 9 unless they are great.

Here is a photo

Has five push 80 mm

Has four pull 80 mm

They are still delta and they seem to be 25 mm thick.

They would be easy to swap out.

I am running eth for around four hours slight drop in hash from 235 to 219

The garage is 96f. As I am burning 5500 watts of gear.  Outside temps is 42f

Back door to garage is open entire house is warm coldest room is 77f

I would love the rom and linux for this miner.

worth some coin to me.

here it is running eth on the stock windows 10 provided

note it is rig 8

this gear is a beast  234-237mh on stock settings about 1150 watts on an evga 1600 g2

okay they should show

your photos do not show as they are oversized shrink them to 1200 x 1000
I did fix one and I circled the important number

so for every 100.0000%   you are losing 0.0008%

the hw gets big    cause the gear mines fast.

if that number goes from 0.0008% to   0.0300%

 you may need :

 1) better psu
 2) cooler room

I assume you have an autotune s9
since you have an autotune GUI

delta 80 mm  they are loud but not nasty pitch  they use  .8 amps at 12 volt  that is about 10 watts a fan


possible replacement

https://www.amazon.com/Bgears-Performance-Black-b-PWM-2Ball/dp/B00UTIB994/ref=sr_1_fkmr1_1?

also delta makes  a slower fan

if this can run in a 96f garage  doing 237mh for eth

commonsense means lower ambient  temp would allow for lower fan speed.

I will buy a few fans use them as push.

the unit uses 9 fans

push pull over the  gpus  and push over the cpu.

my panda is in a 95f garage  running  the oem windows 10  .

 I updated to the latest   eth miner  from claymore for windows and I am getting  237mh  at 1125-1150  watts

every gpu reads 30 or 31 mh

Yeah  as I see it the miner needs an enterprise edition to run 8 miners on windows 10.

even if pandaminer  purchases a 500 pc or 1000 pc key  it is 1 key  for all the units.  this would leave them very vunerable to key fraud.

If they overlay  a good win 10  with an enterprise key provided from Microsoft   it protects them from key theft.

  It also leave you with a win 10 enterprise LTSB that is not activated.  This protects them from key theft but leaves the miner in a gray zone.


Back to the miner  I am running Eth now  the miner is getting 237 mh  for 8 gpus  and uses around 1150  watts  on my evga 1600 g2.

I really would love to get a good linux for this miner.

Yeah 1020 or higher is very nice.

Problem is solved withdrawal is made.

I switch the panda to eth 237mh does pull more power about 1150 at my pdu rather then 1030 for 1715 h for Zec

Having an issue with bittrex.com  I use them to  mine my zec  and hold or sell it.

So I can sign in  but the emails  are not coming to say I signed in  and of course the email to authorize  withdrawals  does not come.

Is anyone else having this issue?

Luck. Is what it is luck.


I pulled the old s9s and have the avalons pointed at the pool.

I may buy 1 more Avalon and hook it up to the other two.

Most people would think that a 25,000 usd  btc coin can not happen it can happen.

Would be very nice to see 5k this year.

I don't want the thread to be sidetracked any more by windows 10 activation discussion .

The gear comes with  windows 10 and it was altered to  windows 10 enterprise LTSB

which is allowed by microsoft.  in fact they give the information on their own website.

Windows enterprise is need to do   8 cards.

and windows won't sell you a 1 pc code for a windows 10 you switched to windows enterprise using the info given to you from microsoft

ONCE AGAIN I AM ASKING WINDOWS/MICROSOFT TO SELL ME A 1 PC CODE.

IF THEY DON'T LET ME BUY THE CODE BUT LET ME CHANGE MY WINDOWS 10 FROM PRO TO ENTERPRISE LTSB   THAT IS WINDOWS /

MICROSOFT'S CHOICE.

To further clarify this..  the  code give on microsoft's website only works on a good copy of windows 10. As per the info on microsoft's website.

So as far as I am concerned I am fine with this arrangement.  If Microsoft  has a problem  once again I am willing to pay them  for a 1 pc key.

No more questions on the software.


Some more on the hard ware.

the stock psu uses only 220-240 volts  it pulls 4.5 amps  or 1080 watts doing   1715 h

the evga 1600 g2 uses 110-240 volts it pulls  4.3 amps or 1032 watts doing 1715h

I will put that in my review thread.  It is good info and a much better warranty.

I have opened the rig and look inside it.  It appears every part is replaceable.
I have yet to check the cpu.
The most difficult part to get would be the mobo the next most difficult would be the cpu as it is a mobile model.

Every other part can be purchased with ease.

I do have one suggestion  fans could be lowered a bit they are full speed and the unit is very cool to the touch.

My garage is 94f..  So this gear does not run hot when fans are at 100%

The stock psu  uses 1080 watts to do    1715 h of zec  maybe it is a bronze


An evga 1600g2 uses 1032 watts to do 1715 h oc zec  this is a gold.

The stock psu  was not hot to the touch after 25 hours run time  the wires were not hot.
So for doing zec on Claymore 9.3  it is a good psu.

@pandaminer 

your motherboard is very nice.

 I believe you could sell the motherboard with a cpu as a package


you could offer your motherboard with:

http://ark.intel.com/products/84810/Intel-Celeron-Processor-3215U-2M-Cache-1_70-GHz = current cpu

http://ark.intel.com/products/84699/Intel-Core-i3-5020U-Processor-3M-Cache-2_20-GHz = an i3

http://ark.intel.com/products/85212/Intel-Core-i5-5200U-Processor-3M-Cache-up-to-2_70-GHz = an i5

and a driver cd


It would be easy to ship it.
The buyer would supply all other parts.

I will pass then as I don't really need it.

At op maybe I would take it. I don't like the skull  my wife has a strong superstition about skulls.

How do you handle payment mostly I self escrow but if  that does not work

the guy right above me is good for me as an escrow.

Not much mining , but it has mined.  It sat idle over 2 years I found it along with one I sold 2 weeks ago.  Right here on this site.

I have some flex in price but not much


here was the last sale

https://bitcointalk.org/index.php?topic=1716138.0

it went for 94 usd

feel free to ask thedreamer  if he was happy with his


https://bitcointalk.org/index.php?action=profile;u=463163

this is his profile link