@ocminer
my 7 rig currently running on your pool for etc, each rig shows about 80-84 hashratem but total at your page its only constant 400.. anything wrong here? hmm
Whats displayed in "My account" - > "my workers" ? If everything is good there and the payouts are ok, your fine, the stats on the frontpage are updated every 30 seconds so you may see some lag there. 3 x 50ish, 3 x 60ish, 1 x 80ish.. hmm, just checked my rigs and they're all matching up nicely. Be sure to use stratum, i recommend genoil 1.1.6 (nicehash) and point it to the "3333" port e.h. etc-eu.suprnova.cc:3333 or etc-us.suprnova.cc:3333 and allow about 15-20 mins after startup to get the correct hashrate displayed. Getwork produces a lot of stales from my experience, stratum is much better. I'm using etc-us.suprnova.cc:3333 with CDM version 5.3, hmm.. maybe I'll let it run awhile more and see if there's any difference =). do let me know if there are any problem with the version I use that might cause it.. thanks =) Ah Claymore ? Should be fine also, allthough in my personal experience genoil's is a bit faster, but thats probably the thing with dual mining... It's normal that it is a bit slower when mining dual and don't forget CDM switched over to mine dev fee. this will result in false displayed hashrates at miner looks like it is constant in hashrate, but the poolswitch takes time and reduce the hashrate to etc network. (change DAG-File, switch pool) so it is not so fast as displayed in miner ... with this fact genoils ethminer is quite faster ! if you want to dualmine, use one screen session with ethminer and a second to mine decred with sgminer -I 18 this let ethminer hash drop nearly 0 % down... Thanks, that's correct, cdm disconnects from the pool at certain times and mines for dev too
|
|
|
@ocminer
my 7 rig currently running on your pool for etc, each rig shows about 80-84 hashratem but total at your page its only constant 400.. anything wrong here? hmm
Whats displayed in "My account" - > "my workers" ? If everything is good there and the payouts are ok, your fine, the stats on the frontpage are updated every 30 seconds so you may see some lag there. 3 x 50ish, 3 x 60ish, 1 x 80ish.. hmm, just checked my rigs and they're all matching up nicely. Be sure to use stratum, i recommend genoil 1.1.6 (nicehash) and point it to the "3333" port e.h. etc-eu.suprnova.cc:3333 or etc-us.suprnova.cc:3333 and allow about 15-20 mins after startup to get the correct hashrate displayed. Getwork produces a lot of stales from my experience, stratum is much better. I'm using etc-us.suprnova.cc:3333 with CDM version 5.3, hmm.. maybe I'll let it run awhile more and see if there's any difference =). do let me know if there are any problem with the version I use that might cause it.. thanks =) Ah Claymore ? Should be fine also, allthough in my personal experience genoil's is a bit faster, but thats probably the thing with dual mining... It's normal that it is a bit slower when mining dual
|
|
|
@ocminer
my 7 rig currently running on your pool for etc, each rig shows about 80-84 hashratem but total at your page its only constant 400.. anything wrong here? hmm
Whats displayed in "My account" - > "my workers" ? If everything is good there and the payouts are ok, your fine, the stats on the frontpage are updated every 30 seconds so you may see some lag there. 3 x 50ish, 3 x 60ish, 1 x 80ish.. hmm, just checked my rigs and they're all matching up nicely. Be sure to use stratum, i recommend genoil 1.1.6 (nicehash) and point it to the "3333" port e.h. etc-eu.suprnova.cc:3333 or etc-us.suprnova.cc:3333 and allow about 15-20 mins after startup to get the correct hashrate displayed. Getwork produces a lot of stales from my experience, stratum is much better.
|
|
|
@ocminer
my 7 rig currently running on your pool for etc, each rig shows about 80-84 hashratem but total at your page its only constant 400.. anything wrong here? hmm
Whats displayed in "My account" - > "my workers" ? If everything is good there and the payouts are ok, your fine, the stats on the frontpage are updated every 30 seconds so you may see some lag there.
|
|
|
I've posted a countdown-clock on https://etc.suprnova.cc which turns to zero when the next 12h 10% bonus starts, be sure to grab the bonus !
|
|
|
The Bonus has not started yet, I'll post a countdown tomorrow.
|
|
|
Because there are a couple of hours left
So then POW has NOT ended yet.. Then i'll reopen the pool until it ends. Is there any info when it end ? It ends at block 259200, approx. Sunday 9am Pacific (-8 GMT) Now finally a good answer, thanks !
|
|
|
Because there are a couple of hours left
So then POW has NOT ended yet.. Then i'll reopen the pool until it ends. Is there any info when it end ?
|
|
|
uhm, is this a mandatory update ? do i have to resync after the update ?
Yes it is mandatory for wallets and masternodes. Yes u have to delete everything except Darknet.conf, masternode.conf and wallet.dat There will no longer be PoW functionality in this new wallet. Ah okay, so POW has ended ?! I can close the pool ?? Yes And why are then blocks from the "old" version still accepted on the new network ? Most confusing fork ever...
|
|
|
uhm, is this a mandatory update ? do i have to resync after the update ?
Yes it is mandatory for wallets and masternodes. Yes u have to delete everything except Darknet.conf, masternode.conf and wallet.dat There will no longer be PoW functionality in this new wallet. Ah okay, so POW has ended ?! I can close the pool ??
|
|
|
I was mining on Nanopool since launch and since my estimates are more and more below whattomine's calculator I started to point one rig to supernova for comparison and made a interesting discovery: Nanopool: Nano pays me for the time I was mining about 0.133832 ETC I've had a second rig, exactly same setup and same hashrate point at supernova while I was mining at nano: So supernova pays me about 0.25 ETC within exactly the same time.. THIS IS 50% LESS ON NANO !!!! I've pointed my rigs now to a few other pools and will compare too, something is clearly wrong here !!! PS: Yes, I waited a bit to get everything mature on Nanopool as well - nothing changed ! And yes, I started at exactly the same time, so difficulty was the same as well ! Very interesting. I have some hashpower on nano. Let us know how you get on. Looks like i will be switching to supranove if that is the case. I mine groestlcoin at supranova without issue. Not too keen on having all my eggs in one basket Remember supranova are giving a 10% bonus ATM and diff has come down a little. Yeah i thought the bonus is already active, i've asked ocminer if this is the case but I think it is not yet already Nope, bonus is not active yet, but soon. I'll post a countdown on the pool tomorrow
|
|
|
Unfortunately we wont be listing that pool for the reason ours is a family oriented website. We want young people to participate in the zonecoin project. Sorry Lol, it's just a funny pool name. Don't be foolish, list it. i don't see anything bad about it either.. Many rap songs contain words more evil
|
|
|
uhm, is this a mandatory update ? do i have to resync after the update ?
|
|
|
http://stats.krypton.rocksSome people have been inquiring about Krypton's new Network Stats page and worrying about how few nodes there appear to be in the network so, I'm here to set the record straight. You may notice a line of yellow text in the middle right of the page. It reads, "This page does not represent the entire state of the Krypton Network - listing a node on this page is a voluntary process." If you would like to add your node to this list, please visit our website for instructions. http://krypton.rocks/stats-2/We at Krypton take pride in being security conscious. For this reason, we don't care to expose our main server's ip by including our running nodes on this Network Stats page. Rest assured that Krypton is running multiple nodes. There is no reason for alarm because you don't see them listed here. I've added my pools node too, i've also added Stratum ports a few days ago, if anyone wants a special mining configuration let me know, private ports etc. everything is possible.
|
|
|
Good news. I am going to repost this as people are asking me for info. Please study this video well and watch for the "tells" a great victory for classic. martin from gnosis was representing the forked eth, what an embarrassment he was. As malreynolds said, "Please study this video and watch for tells." great saying! Really a cool video, was worth watching, happily awaiting the next one
|
|
|
Best pool name ever
|
|
|
|