sorry i don't understand.
can you be more specific?
It's a setting of your PC under your network where you can able to change IP, subnet mask, default gateway, and also DNS. If you still can't get it check this image below where you can edit it. Change the PC IP to 192.168.0.24 and mask 255.255.255.0 then save Or follow this youtube guide below - https://youtu.be/AgJTxF_Ej74?t=108
|
|
|
Why don't you try to recover your 6 bitcoin from your formatted computer if it was never been touched after formatted you can maybe still have a chance to recover the wallet.
Actually, I have the same experience that I never forget in the year 2018 I was almost depressed and forgot my holdings at that time because two important persons in my life die from illness and cancer. But I am still lucky that I sold them at a very cheap price. At that time I want to commit suicide but I'm thinking about the people I'll leave behind. 2018 is pretty bad luck to me.
Anyway, we have different paths after that I continue to stay here at the forum and trade, and lucky that I bought some miners after selling my coins year 2018 to have a new start.
|
|
|
You must give more details about the limited Electricity supply you mean do you have only 10,000kw? or lower than that? What is your source of power is that solar or it is residential Electricity? What exactly are your current ASIC miners? I think you better read this link below it should answer your needs if I'm right. - https://bitcointalk.org/index.php?topic=4636521.0If you are looking for profitable ASIC units today then check this one https://www.asicminervalue.com/
|
|
|
I never heard of bitshield and I tried to search it I don't know how these people end up using it even though, you can see almost all reviews and comments on Playstore.
Most of the reviews are fake as what I can see there are many people who have had a bad experience using this wallet if they read the reviews I'm sure it will tell you that the wallet is risky and you should not trust this wallet.
Newbies are most of the victims of this kind of scheme they are mostly attracted to reviews without using Google search and asking it to someone who knows about wallets.
|
|
|
I suggest you try this instead of using gpg --import put this command below gpg --keyserver keys.gnupg.net --recv-keys 6694D8DE7BE8EE5631BED9502BD5824B7F9470E6 This code is on Electum GitHub documentation here https://github.com/spesmilo/electrum-docs/blob/master/gpg-check.rst using that command is for substitute if lookup on the server temporarily does not work or if you can't successfully import keys. You must run CMD as administrator before you send that command. Once it's done open Kleopatra and go to notepad and import the ThomasV pubkeys that you link above paste it to notepad and then import and proceed to verify the Electrum installer. It should automatically verify.
|
|
|
Saw used S9K at 85 USD from AKMINERS (shipping on top)
Be careful dealing with AKminers they are bad sellers many people are complaining and being scammed by that seller. Also, some people receive broken units so better stay away from them. If you are looking for cheap units I suggest you contact offordscottWhich is way more trusted than Akminers.
|
|
|
I don't think it's ok to say here or not but make a fake ID for KYC and use it in binance or kucoin. It's helpful for many people. i used to use one when i was not issued an ID card. But don't use it for illegal use.
That's a very bad suggestion you can use p2p but you won't be able to withdraw them directly to your bank account, ATM, or any payment method that needs your name unless the ID you use is one of your family. Bisq seems to be good but how to receive USDC into Bisq ?
It seems they don't have a USDC option on their market if you can able to exchange or convert it to XMR there are many sellers/buyers looking for it.
|
|
|
I have mailed this issue to blockchain.com support. Maybe they can figure out the problem on their side and fix it. I will post updates here(if they give any meaningful reply). Hopefully, no one else has to face this issue again.
I don't know if blockchain has a plan to fix the issue it was there since years ago and their wallet is actually problematic I have bad experiences using their wallet and actually, I still have funds on their wallet which until now can't be able to recover using wallet id, email and the right password. You are lucky that you charge the battery successfully without shorting it. You can able to see the negative and positive under the terminal flex. Anyway, you are now able to log in through a QR code and able to make a sign message. Now do not use the blockchain wallet ever and use the proper wallet.
|
|
|
What I see here is that you want to use other trader's funds to test your trading skills like the above said you won't be here if you are actually a pro in trading. That's risky traders shouldn't hire anyone to trade their investment. And If I'm right why not play the trading simulator instead to test your skill and if your strategies are effective then you can apply them in real trading. Check this for trading simulator
|
|
|
There is no software yet for overclocking it. Why do you want to overclock this unit? is it hashrate drop? There is an option under the configuration of this unit to choose either normal mode or performance mode. Or you can try to play with the FMS app and use "diagnose" and send the commands below 537 to 612 these might be frequencies increasing it might force your miner to run overclocked. [{"command":"ascset","parameter":"0,aging-parame- ter,60-537:562:587:612"}] Take note never tested it but you can try and be careful it might also need more power and it can lead to PSU failure. Just in case send this command below for auto tuning your miner. [{"command":"ascset", "parameter":"0,aging-set,1"}]
|
|
|
Be careful of that thing don't ever to try to authorize them when you are trying to exchange this token this is a common issue on ETH chain. Like the above said it is most likely a scam scheme I also have airdrops on my wallet both ETH and BSC chain and all of them are worthless. Just ignore them and your wallet is safe. I suggest you read this " [Scam Alert] Beware of Airdrops that will drain tokens out of your address."
|
|
|
There is no difference in both modifying and editing they are the same. The only difference is that Modify means change and edit means correction. So there is nothing that needs to be changed in the guide because those words were perfectly understandable unless you don't know how modifying/editing works?
|
|
|
When I check the transaction from chain.so it wasn't yet confirmed I tried to copy the raw hex and try to broadcast it to blockcypher testnet it broadcasted but it still stuck. I check the raw hex into https://tbtc.bitaps.com/broadcast but there is an error it shows "Broadcast transaction failed: min relay fee not met, 111 < 141 (code 66)" Based on the error it seems that you are sending tBTC with a below minimum fee. Would you mind trying to bump or increase the fee and broadcast it to blockcypher testnet. Check the source code of the Bitcoinlib you might be able to change the minimum fee.
|
|
|
What percentage does it take in fees though? The issue I've had with either coinjoins or mixers cant remember which is the fees are high.
Coinjoin fee like in Wasabi wallet is around 0.003% and it depends on the anonymity you set and Wasabi Coinjoin has a different level sample you set it to 50 which is the highest anonymity/privacy 0.003x50=0.15% plus the transaction fee. Mixers have different service fees for mixing coins but Chipmixer does not ask for fees it depends on you how much you can donate and you must read their faq about how deposit works because if you pay sample 0.0045 the 0.0005 will be considered as a donation and you will only receive 0.004 chips.
|
|
|
Are you planning to operate a Bitcoin ATM in your area/country? This won't be easy it's very important that you know the regulation in your country about financial banking before you enter this business but if you are willing to start a Bitcoin ATM business then there is a full guide that you can follow including how to set them up and how it works. Check this link https://github.com/zaowens/bitcoinsupport/blob/master/guides/bitcoin-atm-business-guide.md
|
|
|
I wish it had wireless charging, then I would be able to ride public E-scooters downtown without worrying about battery lol It's a cheap android(Samsung M51, which was gifted xd)
Samsung M51 or any M series does not support wireless charging, unlike the S and note series. About the charging port, it seems you don't need to resolder them you can buy a whole charging board it's around $12 on Amazon or if you are looking for a cheaper one you can buy it on Aliexpress they are selling it for $3-$4. The shipping fee seems free if you are living in the US. It is easy to replace after you disassemble the unit unlike replacing only the charging pin that needs BGA hot air and soldering iron to remove and resolder the charging pin. Just make sure to be careful on the attached flex subboard to the mainboard.
|
|
|
This is not the right section to ask this you need to move this to service discussion. Anyway, I'll try to report it to move it there. About this site, it seems it is a cloud mining site and someone talked about this 9 months ago on Reddit but I don't trust anybody it could be alt accounts of the owner of the post from this link. They just want to make this cloudmining looks legit and it's actually one of the marketing strategies to get potential victims. For me, or even ask for someone here 99% of Cloud mining sites are scams so avoid them if you are planning to invest there. Another thing that I notice is that the website is totally built on WordPress and designed using Divi Page builder. Most cloud mining sites that use WordPress as their CMS is 100% scam.
|
|
|
Is your core wallet synched?
Yes very much so. Tried running every possible bitcoin.conf to reduce ram usage server=1 daemon=1 blocksonly=1 prune=550 dbcache=10 maxconnections=3 maxmempool=10 rpcthreads=2 par=1 rpcuser=user rpcpassword=pass rpcallowip=127.0.0.1 tried these in sequence. trial and error over the past 3 weeks. The Bitcoin testnet works perfect with my build of ckpool. ONLY when in mainnet does it crash and throw error Are you sure that you are fully synced? I noticed one thing under your bitcoin.conf config look at the prune above. As you can see it is set to 550 which means your bitcoin core is not yet fully synced you only downloaded/synced 550MB of blocks. Mainnet full node requires 450GB because the current size of the blockchain is around 400GB. This is I think the reason why you get those allocation errors. To disable prune mode you can set it to 0.
|
|
|
|