{ "algo": "quark","priceid": "12", "folder": "D:\\data\\MinerControl161\\sgminer_nicehash", "command": "sgminer.exe", "arguments": "-c quarkNH.conf", "usewindow": true },
|
|
|
what rent, there're four coins being mined by the pool, and probably QRK is fubar cause there's no block in 8 hours...
|
|
|
Quark port stops after one or two accepted shares, then it suddenly runs out of work
|
|
|
{ "general": { "power": 0.10, "exchange": 270, "currencycode": "USD", "minprice": "0BTC", "mintime": 4, "maxtime": 600, "switchtime": 0, "delay": 1, "deadtime": 10, "statwindow": 60, "minebyaverage": false, "dynamicswitching": true, "dynamicswitchpower": 2, "logerrors": true, "logactivity": true, "gridsortmode": 2, "minerkillmode": 1, "traymode": 0, "donationpercentage": 2, "donationfrequency": 240, "remotesend": true, "remotereceive": true }, "algorithms": [ { "name": "x11", display: "X11", "hashrate": 1768, "power": 0 }, { "name": "x13", display: "X13", "hashrate": 1283, "power": 0 }, { "name": "x14", display: "X14", "hashrate": 1263, "power": 0 }, { "name": "x15", display: "X15", "hashrate": 0, "power": 0 }, { "name": "fresh", display: "Fresh", "hashrate": 1460, "power": 0 }, { "name": "quark", display: "Quark", "hashrate": 2047, "power": 0 }, { "name": "nist5", display: "Nist5", "hashrate": 0, "power": 0 }, { "name": "neoscrypt", display: "NeoScrypt", "hashrate": 0, "power": 0 }, { "name": "scrypt", display: "Scrypt", "hashrate": 0, "power": 0 }, { "name": "scryptn", display: "Scrypt-N", "hashrate": 0, "power": 0 }, { "name": "keccak", display: "Keccak", "hashrate": 0, "power": 0 }, { "name": "qubit", display: "Qubit", "hashrate": 2385, "power": 0 }, { "name": "lyra2", display: "Lyra2RE", "hashrate": 350, "power": 0 }, { "name": "sha256", display: "SHA256", "hashrate": 1000, "power": 0 } ], "nicehash": { "account": "", "detectstratum": true, "worker": "1", "algos": [ { "algo": "x11", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x11NH.conf", "usewindow": true }, { "algo": "x13", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x13NH.conf", "usewindow": true }, { "algo": "nist5", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c nist5NH.conf", "usewindow": true }, { "algo": "lyra2", "priceid": "9", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c lyra2NH.conf", "usewindow": true } ] }, "westhash": { "account": "", "worker": "1", "weight": 0.90, "algos": [ { "algo": "x11", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x11NH.conf", "usewindow": true }, { "algo": "x13", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x13NH.conf", "usewindow": true }, { "algo": "nist5", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c nist5NH.conf", "usewindow": true }, { "algo": "lyra2", "priceid": "9", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c lyra2NH.conf", "usewindow": true } ] }, "yaamp": { "account": "", "pricemode": 0, "balancemode": 0, "algos": [ { "algo": "x11", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x11Yaamp.conf", "usewindow": true }, { "algo": "x13", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x13Yaamp.conf", "usewindow": true }, { "algo": "x14", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c x14Yaamp.conf", "usewindow": true }, { "algo": "fresh", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c FreshYaamp.conf", "usewindow": true }, { "algo": "quark", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c QuarkYaamp.conf", "usewindow": true }, { "algo": "qubit", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c qubitYaamp.conf", "usewindow": true }, { "algo": "lyra2", "priceid": "lyra2", "folder": "D:\\data\\MinerControl164b\\sgminer", "command": "sgminer.exe", "arguments": "-c lyra2Yaamp.conf", "usewindow": true } ] }, "manual": { "account": "myaccount", "algos": [ { "algo": "x11", "price": 0.0, "fee": 3.0, "folder": "", "command": "", "arguments": "-o manual.com:1 _ACCOUNT_ -p x" } ] } }
|
|
|
two 5870s used for heating purposes, single hashrates - x11 - 1768, x13 - 1283, qubit - 2385, quark - 2047 and lyra2re - 350
added "minprofit": 1.01, to see if it changes anything, nope, I think defaults are not being set properly if missed
|
|
|
"statwindow": 60, "minebyaverage": false, "dynamicswitching": true, "dynamicswitchpower": 2, * "pricemode": 0, * "balancemode": 0,
it's horrible, only mines qubit 2:1 x11 both yaamp for hours
anyone ran original 1.6.1 against same rig 1.6.4.KBmod?
|
|
|
what you type as hashrate for WhirlcoinX, nicehash topic says put f10=135, 135Mh/s is what I get from on 280x, but miner control earn column is way out of correct info IMHO about 1000 times
|
|
|
hamster has hidden fees - your coins are being held forever unless you have over 0,002, this is per coin type - MYR has 3 different coin types, so your balance is being split between them and not counted as one ... MYR..., they have 15 coins out there, so you need 0.04btc worth of coins mined per day to get steady daily payout
also they mine LTC and never found a block and DarkCoin has 12 to 16 hours estimate time to find a block, add PPLNS on top of that...don't use them unless you have 5-10kWh/s mining power...cause odds are against you...
unlike that, yaamp pays each satoshi...
0.042898 0.042898 0.00000006 BTC
|
|
|
trying to mine on westhash I put p=0.0122 and my miner is not mining put if I just put x as password it mines how to I set the p value ?
if you put a password for miner -> p=0.001 on your ant miner interface, it doesn't mine at all, same for d=1024 or some combination like p=0.001;d=1024 you need stratum proxy I guess...
|
|
|
temp ban a pool or part of it for some time would be nice via GUI, it will save some time for cut/paste conf file and no need to stop mining.
|
|
|
frazier34567 sent you a PM with my config.
Regarding the hamsterpool did anyone found a working config for their lyra2 algo?
it's just one coin that is being mined, so differences(to Yaamp) would be pool fees, pool luck(the larger - the better) and exchange being used p.s. I don't see Qubit estimate
|
|
|
Lyra2RE algorithm added.SETTINGS:Here are some recommended settings: "pools" : [ { "name" : "NiceHash_Lyra2RE", "url" : "stratum+tcp://stratum.nicehash.com:3342", "user" : "your-BTC-address", "pass" : "d=1", "algorithm" : "Lyra2RE", "nfactor" : "10", "xintensity" : "64", "thread-concurrency" : "8192", "gpu-engine" : "1050", "gpu-memclock" : "1500", "worksize" : "64", "gpu-threads" : "2" }, Download miner from here: https://github.com/metalicjames/sgminer-Lyra2RE/releaseshttps://github.com/metalicjames/ccminer-Lyra2RE/releasesThese miners should also work well on other algorithms, but we haven't checked if all algorithms optimizations are included. MULTIALGO:Lyra2RE is disabled on multilago by default (because currently you have to use a special sgminer fork and the transition will take a while, I guess). But nevertheless if you want to use multialgo you can still use it by manually adding Lyra2RE factor to your pool's password setting, for example: "pass" : "d=1;f0=0;f2=0;f3=8.5;f4=4.5;f5=500;f6=3.5;f7=14;f8=0.35; f9=1.25", (as always, remember to add this to all your NiceHash/WestHash pools entries, not only for the new Lyra2RE entry). you can put it on multialgo, no change in speeds when you copy cgminer.conf and already compiled bin files from other versions of cgminer
|
|
|
you can start as many as you like, just configure 3 of those miners not to use any auto-fan auto-gpu feature or you'll end with failed fan(s)
|
|
|
OK thanks, so this pretty much makes this makes TMB a no go for those of us without neoscript on our rigs. Too bad.
You may as well stick with X11, it's almost always the most profitable. that's true for R9 cards unless mining neoscrypt, nicehash says otherwise for HD 5xxx where it's X13 is like 90% of the time
|
|
|
Freicoin mining is FUBAR, all I got was - work available, miner set diff x1, reject, reject, miner banned, repeat
|
|
|
anyone can tell you if you had provided info about which hardware, OS and drivers versions...
|
|
|
I'm cornered with an old and crap hardware, which won't run neoscrypt and even one rig can run x11 or x13, what can I use for external profit swap to continue mining @ TMB, as I'm stuck to backup as most of the time x11/13/15/nist multiports are closed cause it mines neoscrypt
Neoscrypt has ruined profit switching for me as well. Why it is included in profit switching is beyond me. I just found another pool until it levels out. neoscrypt got a port for autoswitch, it is 4014. use it for mining neos or avoid it at your conf file so it wont mining neos and using autoswitch for x11-x13 only. you can't avoid it as other ports 4010-4013 are CLOSED when 4014 is opened https://pool.trademybit.com/startso you end up with 4440 OR 5550 OR 6660 OR 7770, but you can never know which of those is most profit as you mine those as a backup
|
|
|
I'm cornered with an old and crap hardware, which won't run neoscrypt and even one rig can run x11 or x13, what can I use for external profit swap to continue mining @ TMB, as I'm stuck to backup as most of the time x11/13/15/nist multiports are closed cause it mines neoscrypt
|
|
|
Why Nist5 no miners coins worth 0?
0.00146 0.00009 VAULT | Vaultcoin Nist5 17.74G 3562 55.95G 1,158.052 1.017 SPECULATIVE yes 0.00041 0.00002 UPM | Eutopium Nist5 120.96M 3560 17.81G 174.116 4.960 0.00004307@Bittrex yes 0.00000 0.00000 ICB | Icebergcoin Nist5 3526 -- 52.181 0.00001000 0.00000500@Cryptsy no 0.00000 0.00000 N5X | N5coin Nist5 3523 -- 463.695 0.00001000 0.00000862@Poloniex no still I don't get it, Iceberg and N5 have non zero price, difficulty is known, reward is known but first two rows are zeroes, and there are 17 coins @ x11 and over 20 @ x13 with those zeroes...
|
|
|
TMB_Multi-Multi_X11 stable for 10 seconds
"failover-switch-delay": "10",
drop that value
|
|
|
|