|
I also just completed a wire transfer for Minersource.net, what you also need to know is that bank of america (the bank that is used for them) has a 25 dollars receiving fee. Also my bank (commerce) needs to know the address if its over 3K, which it was. Luckily I was able to find it on the about us page on the minersource website.
Can bobsag please confirm receipt of my order? I hope everything went through and my bank told me that it will be a couple hours before the money should show up. I know your busy bob, but it is a lot of money and I just want to make sure. You can PM me if you need order number, etc...
|
|
|
|
I have a bunch of these on order and want to make sure I have all the right stuff to get them to run... I noticed on BA website that they will come with their own power supply, so I do not have to worry about that apart from a power strip or two. I have been looking and found this switch to plug them all into... http://www.amazon.com/gp/product/B003BU0EKW/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003BU0EKW&linkCode=as2&tag=pck01-20Will the 24 port version of that be good for these? I should be able to plug and play correct? Also does anyone know how I would make or obtain a wireless switch? I would prefer to not have to set these up near my router, and a wireless switch or a way to make that wireless easily would be great! Also, I assume they do not, but does anyone know if these come with Ethernet cables? If I am going to order a switch I would like to just get everything at once. Any Ethernet cable should work correct? Thanks to any answers or help in advance! DebitMe You don't really need a gigabit switch, 100Mbps would be just fine. The switch is unmanaged, so it should just be plug and play. The cables you will need are ethernet patch cables. Also you should consider power usage when shopping for a power strip. You might not be able to run more than 1 or 2 on a single circuit. The 24 port switch is for expansion purposes in the future. But by the sounds of your comments it should be fine. I am unsure what Ethernet patch cables are, time for some google research, lol. The X-1's only use 50 watts of power so I should be able to get a bunch of them per single circuit, unless I am missing something? You'll be fine with X-1's. I wasn't sure if you were running X-3's or X-1's. I think I will get 1 or 2 x-3's, but mostly x-1's for me. I looked up Ethernet patch cables, is there a difference between an Ethernet cable and an Ethernet patch cable? |
|
|
|
I have a bunch of these on order and want to make sure I have all the right stuff to get them to run... I noticed on BA website that they will come with their own power supply, so I do not have to worry about that apart from a power strip or two. I have been looking and found this switch to plug them all into... http://www.amazon.com/gp/product/B003BU0EKW/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003BU0EKW&linkCode=as2&tag=pck01-20Will the 24 port version of that be good for these? I should be able to plug and play correct? Also does anyone know how I would make or obtain a wireless switch? I would prefer to not have to set these up near my router, and a wireless switch or a way to make that wireless easily would be great! Also, I assume they do not, but does anyone know if these come with Ethernet cables? If I am going to order a switch I would like to just get everything at once. Any Ethernet cable should work correct? Thanks to any answers or help in advance! DebitMe You don't really need a gigabit switch, 100Mbps would be just fine. The switch is unmanaged, so it should just be plug and play. The cables you will need are ethernet patch cables. Also you should consider power usage when shopping for a power strip. You might not be able to run more than 1 or 2 on a single circuit. The 24 port switch is for expansion purposes in the future. But by the sounds of your comments it should be fine. I am unsure what Ethernet patch cables are, time for some google research, lol. The X-1's only use 50 watts of power so I should be able to get a bunch of them per single circuit, unless I am missing something? |
|
|
|
I have a bunch of these on order and want to make sure I have all the right stuff to get them to run... I noticed on BA website that they will come with their own power supply, so I do not have to worry about that apart from a power strip or two. I have been looking and found this switch to plug them all into... http://www.amazon.com/gp/product/B003BU0EKW/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B003BU0EKW&linkCode=as2&tag=pck01-20Will the 24 port version of that be good for these? I should be able to plug and play correct? Also does anyone know how I would make or obtain a wireless switch? I would prefer to not have to set these up near my router, and a wireless switch or a way to make that wireless easily would be great! Also, I assume they do not, but does anyone know if these come with Ethernet cables? If I am going to order a switch I would like to just get everything at once. Any Ethernet cable should work correct? Thanks to any answers or help in advance! DebitMe |
|
|
|
Just placed a large order, but have received no payment instructions.
I'd like to confirm that the order I just placed will be in the February delivery batch, otherwise I'll just cancel and not pay.
Please confirm.
Thanks!
Buy through the re-seller or from blackarrow directly? If Black Arrow, add the sales manager blackarrowsoftware on skype  . She is online now and offering sales support. I was unaware of the "re-seller". Where does bobsag ship out of? If he ships from US, I'll cancel the original order I placed with BA and place with minersource.ne .ne would seem to indicate Niger, but somehow I doubt that. They are located in Missouri. Bob, if your out of MO, do you do local pickups? I live in Kansas City MO and could make a drive to pick up units when the time comes. |
|
|
|
|
Just put an order in for 4 units, looks to be confirmed paid.
Unfortunately when I first heard that the Batch 1 was sold out I used my btc for something else, then it reopened so I am currently moving some funds around to try and get some more.
Thanks for your work Bobsag, you are a hero!
|
|
|
|
|
Ill pay you .035 Btc ea shipping to US. You will go first for this, I have good trust and have done many deals on this forum, please review my trust rating/comments. Also currently buying 40 and 63 of these from 2 different people with no problems.
If interested let me know.
|
|
|
|
Shipped, tracking sent
Paid first half. Rest of it due upon delivery. Thanks again! |
|
|
|
PM'd - Transaction in progress
Transaction agreed upon. Still looking for more! |
|
|
|
|
BUYING AGAIN!!! PAYING .01 btc per USB stick!
I will buy all of your block eruptors at .01 Btc ea. If your interested in selling please let me know. I will pay for shipping as well which will be determined when we figure out how many block eruptors you have, but they should fit pretty well inside of the flat rate shipping boxes in the US.
Thank you for your time.
|
|
|
|
|
I am still in for 10.68 Btc and am with whoever is proceeding with hearings.
|
|
|
|
|
That is a fine opinion to have but I disagree about that valuation.
|
|
|
|
|
I am looking for one Jalapeno that has been upgraded to the 7 GH/s version. Must include PSU and USB cable.
I am willing to pay .30 Btc including shipping to 66221 KS.
I am willing to pay .35 btc including shipping for the asicminer blade.
You either ship first or set up escrow and escrow fees come from the payment, I have completed many trades and have good rep, but as always feel free to setup escrow with a trusted person.
Please let me know interest.
|
|
|
|
so is my understanding correct that 10 x1s is the same as ONE X-3 ?
the prospero x1 shows minimum of 10 and the x-3 shows that you get 2 modules that are 10 each.
am I missing something? why is the price so much different for the same hashing power ?
Nope, you would need 20 X1's to get the same hashrate as an X3 (as per specs) X1 - 100MH/s X3 - 2TH/s COUGH 100 GH/s Cough  |
|
|
|
|
So if I buy one in the auction will I just need a heatsink and a power supply for these? Any modified cables for the power supplies or does it just take a 6 pin connector? Does it come with the USB cable?
Do you have a link to where I could purchase a heatsink that would work with these?
Thanks
2 @ .5
|
|
|
|
|
I decided to sell, I was given 10.2K for everything. I think I will buy some X-1's from Black Arrow now.
|
|
|
|
|
Show Posts
