Don't expect much more from it.
I have several 570's ranging from 26,5 to 28,5Mhs.
I haven't seen more then 28.5 in any 570 to date, so yours is totaly normal performance wise.
really? even my old 470 refs are doing better then the numbers you state. rx570 can go up to 31. Normally however it hashes around 29.5-30.5 I've got a rig of rx570 4gb MSI gaming with Elpida doing mere 29.4. And the only slower 570 I've got is ASUS Expedition hashing at 28.8 Of course it's possible if you are willing to deal with memory errors in HWinfo. GPUs can have hundreds of errors and seem to work fine but you have a steady higher stale shares percentage and the ocasional rejected share so i cannot accept 30mh as a 570s normal number. also fyi mem errors in HwInfo are both those that were corrected and those that were not. can u say your asic quality of your card please ? and can u share your mod bios rom bios is polaris one click, asic quality is bs. all polaris are same. sometimes the 570 is shitty but very rare. and you can spot it if it is stable at 1180&1850-1900 @ 850mv but refuses to do 1180:2000@850 with appropriate straps ( fine tuning problematic ones - profiles in overdriven tool, for volts I don't use same phase values as claymore does. for me is 1150 : 1950 @ 900mv and cant over 1950 system go crash my cart is 570 gaming x 4gb elpida\hynix and i get 28.5mh overall And now with air warming I'm forced down memory to 1900 I use 1150@825 2225@825. No problemo.
|
|
|
Changed max temp to 80C. Guess they will throttle a little bit on the hottest days. But it is better to keep the cards healthy.
|
|
|
Don't expect much more from it.
I have several 570's ranging from 26,5 to 28,5Mhs.
I haven't seen more then 28.5 in any 570 to date, so yours is totaly normal performance wise.
really? even my old 470 refs are doing better then the numbers you state. rx570 can go up to 31. Normally however it hashes around 29.5-30.5 I've got a rig of rx570 4gb MSI gaming with Elpida doing mere 29.4. And the only slower 570 I've got is ASUS Expedition hashing at 28.8 Of course it's possible if you are willing to deal with memory errors in HWinfo. GPUs can have hundreds of errors and seem to work fine but you have a steady higher stale shares percentage and the ocasional rejected share so i cannot accept 30mh as a 570s normal number. also fyi mem errors in HwInfo are both those that were corrected and those that were not. can u say your asic quality of your card please ? and can u share your mod bios rom bios is polaris one click, asic quality is bs. all polaris are same. sometimes the 570 is shitty but very rare. and you can spot it if it is stable at 1180&1850-1900 @ 850mv but refuses to do 1180:2000@850 with appropriate straps ( fine tuning problematic ones - profiles in overdriven tool, for volts I don't use same phase values as claymore does. Mine is at 1150@824 2225@825 Cant do them to do 2250 at overdriventtool. Think 2225 is max
|
|
|
Normal behavious with phoenix? (reported vs actual etc) most likely long ping to pool and lot of stale shares 2% stale shares. Maybw its devfee kicking in.
|
|
|
Normal behavious with phoenix? (reported vs actual etc)
|
|
|
So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.
13 gpu + 6 mining gpu
|
|
|
Hello!! It seems to me that it is necessary to update drivers to the latest version. There is a limit of 8 graphics cards.
What? What drivers? U talking about bios? People are running 13 gpu without problems.
|
|
|
Does the miner create a new logfile when it is closed and starts again?
|
|
|
I read some saying 85C some hours every week aint that bad. Normally they are 70C. But these days are damn hot with 31C outside. The rigs are outside.
Do you have any vents behind the cards or just natural airflow? Some new rigs have pre-made holes to mount 120mm vents behind. If i remember correctly you have made your own rig from wood? Maybe you could just add one more plank with 2 L stands to mount few vents just to make some additional airflow. They are placed in a pillow box and standing outside Fans blowing in and fans on rear blowing out. Outside temp are 31C and gpus are 60C. Look at youtube, a guy have done something the same. Outdoor mining rig in plastic pillows box.
|
|
|
Turn pc off and pull the power plug for 10 minutes.
|
|
|
Hi. For those who use software to control temp on gpu. What is your max temp on gpu and what is your target temp? I have target temp 50C and max temp 85C before they trottle. I have my rigs outside and temp varies with weather. If thw sun is shining on my boxes in the morning and the temp is over 30C some of the gpu reach 85C and throttle until the sun is out of reach and temp lowers. I miss winter Using overdriventool
|
|
|
this motherboard failed on me as well. I was lucky to return within a few days
Strange... been running 4 of these nonstop since january. No problems. Temperatures from 25C - 90C (winter vs hottest days in summer). 90C on the gpu? My mistake. I ment 85C. When they get to 85C they trottle. But this have only happened 5 times this year. you really should consider setting the temp limit to a lower temperature. 85C default limit is too high, you shouldn't run your GPUs with temperatures like that. 75-77C is much better. Tarhet temp is 50C. Thwy arw normally around 65C. But during the 2 hottest hours they may peak to 85C. And 40C at night. Why not set temp limit to 75 just to prevent cards from going all up to 85? Throttling will decrease hashrate but that's probably better if you want longevity for the cards. I read some saying 85C some hours every week aint that bad. Normally they are 70C. But these days are damn hot with 31C outside. The rigs are outside.
|
|
|
this motherboard failed on me as well. I was lucky to return within a few days
Strange... been running 4 of these nonstop since january. No problems. Temperatures from 25C - 90C (winter vs hottest days in summer). 90C on the gpu? My mistake. I ment 85C. When they get to 85C they trottle. But this have only happened 5 times this year. you really should consider setting the temp limit to a lower temperature. 85C default limit is too high, you shouldn't run your GPUs with temperatures like that. 75-77C is much better. Tarhet temp is 50C. Thwy arw normally around 65C. But during the 2 hottest hours they may peak to 85C. And 40C at night.
|
|
|
Hi. When setting the OC clock on nitro+ 570 to 2250 in overdriventool it doesnt work. I can only go to 2225. What is causing this?
|
|
|
Thanks. I have 39 amd 570 (3 rigs à 13 gpu). Raised total speed from 1208 to 1213 with phoenix with autotune. Havent tried manually adjusting yet.
The speed was more stable with claymore (1208 mh/s). With phoenix it is from 1210-1213. And the speed is different from each time the miner restarts due to auto-tune. Maybe it is better to write down the best settings and set the tune manually.
|
|
|
this motherboard failed on me as well. I was lucky to return within a few days
Strange... been running 4 of these nonstop since january. No problems. Temperatures from 25C - 90C (winter vs hottest days in summer). 90C on the gpu? My mistake. I ment 85C. When they get to 85C they trottle. But this have only happened 5 times this year.
|
|
|
Just started using this miner now. Seems good so far.
1. When starting mining the line "unable to open log file etc.." shows up for a few seconds before it starts mining. What is that about?
2. Also using the autotune. How come claymore autituning takes a few seconds and yours a few minutes?
|
|
|
Flash them with original bios. Then flash your moddes bios and oc.
|
|
|
my eth hashrate on 570 25mh/s. on 2x 1050ti = 31mh/s. better to stick to 2x1050ti
All my 570 = 31.x mh/s
|
|
|
|