^^^ -h primarily depends on the amount of video memory available, just let it atuo-tune unless there's a problem. Interesting coin you're mining there BTW.
edit:
I just visited their website and their into graphic immediatly made me think of wow vanilla only with premium graphics, but then I was like oh it's just a stupid CGI info graphic of trees and clicked on "project" ...
"We are a new gaming company. Our core business..."
edit_2:
Blakecoin was doing something along these lines, that project seems bit sluggish last I checked though.
These lines are only for testing because I wanted to try out the new Claymore CryptoNote AMD GPU Miner v10.2 Beta - POOL miner if it is more powerful than v9.7. XLC coins do not interest me at this time. About that value -h 832 I read in READme!!! document. But, when I do not set the value, there is low power, somewhere around 320 H/s for the card. I have the same problem when I try auto tune the rig with my 570/470 my 570s are fine the 470 hashes at 300 something on my rig with 470 4gb and 8gb cards the rates are all over the place 340 to 600 nothing stable I tried setting the virtual memory th 50gb that didn't help so I'm using gatelessgate I don't get it claymore's miners are usually the best this new xmr miner sucks I can't get this stable on any of my rigs |
|
|
|
|
Finally a new site to buy miners I no I won't get robbed its hard to buy a asic from the internet I'm looking to get pangolinminer or really want a s9 would you be stocking any of these soon I would buy used also thanks
|
|
|
|
|
Does anyone have a pny gtx 1060 6gb just looking to see rates and power I have 1070 msi gaming and pny 1070 the msi hashes a little higher but uses more power my msi gaming 1060 6gb uses almost as much power as my pny 1070 so I'm looking at getting pny 1060 6gb or zotac 1060 6gb mini
|
|
|
|
|
The way I see it only a retard or someone who wants it to look like a hack keeps 4700 BTC in a hot wallet there's no way any legit company wouldn't have cold storage again either their retarded or wanted this to happen
|
|
|
|
|
I go to homedepot or lowes and buy 3/4 aluminum angle 8 ft usually two are good for one 6 gpu rig I think they cost $9 each and I cut them to what I want than drill and rivet the frame together if you don't have a rivet gun you can use self tapping screws but I can cut drill rivet the frame together in 15 mins it takes me longer to setup and clean up than to build
|
|
|
|
|
What's everyone using for a wallet
|
|
|
|
|
If the BTC core team did something about the blockchain size issue 2 years ago instead of bickering and arguing like a bunch of two year olds ppl could of gotten daily payouts without spending $10 to send $5 the cost of BTC transactions is stupid this is why we have BTC this and that and how is it a handful of ppl are controlling the development and future of BTC
|
|
|
|
|
Ok this is going to sound like a newb question but can I use whatever pools I want or have to use whats in 1bash I no zpool, nicehash, and mph stay but do I have to use suprnova for zen or can I just put the pool I want
|
|
|
|
|
What are good settings for 470's 4gb I can't find a good setting I either get half my hashrate or crash but the crazy part is my 570's 4gb are fine
|
|
|
|
|
Could someone who's running 390's and 270's care to share their settings it's been awhile since I ran mine been using rx cards and 1070's but I figured with bitcoin being so high I'd bust out my r9 cards but I'm having trouble finding good settings for xmr thanks
|
|
|
|
|
First let me say I think NVOC is awesome I've been running amd rx cards and win 10 pro on my rigs but after setting up this nvidia trial rig I'm hooked I just got two 1070's and a 1060 to see what cards I want to go with both my 1060 and 1070 are msi gaming cards and my other 1070 is a pny what would be the best over clocking setting for these I was thinking of using algo specific oc settings but would there be a problem with running the same clocks for 1060 and 1070 also in 1bash there's two different sets of algo specific oc's what is the difference one is halfway down and the other is at the bottom
My motherboard is asus M5A97 R2.0 with amd sempron 145 cpu don't know if you want to add it to supported hardware
|
|
|
|
Zawawa what drivers are you using I have one rig that's giving problems win 10 pro with beta blockchain drivers I'm currently running sgminer nicehash version mining monero on nicehash it seems stable but whenever I try the new GGS my rig crashes with the error below in event viewer also I get kernel power which is probably from a unexpected shutdown do you know what it means should I say screw it and reinstall win 10 pro
Faulting application name: GatelessGateSharp.exe, version: 1.1.1.0, time stamp: 0x5a10f362
Faulting module name: KERNELBASE.dll, version: 10.0.15063.674, time stamp: 0x93d2100b
Exception code: 0xe0434352
Fault offset: 0x0000000000069e08
Faulting process id: 0x1b28
Faulting application start time: 0x01d363de365839c5
Faulting application path: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
Faulting module path: C:\Windows\System32\KERNELBASE.dll
Report Id: 7991cce3-6db1-4ed6-a523-a7c40f04d0f1
Faulting package full name:
Faulting package-relative application ID:
I also have .NET runtime error
Application: GatelessGateSharp.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Threading.AbandonedMutexException
at System.Threading.WaitHandle.ThrowAbandonedMutexException()
at System.Threading.WaitHandle.InternalWaitOne(System.Runtime.InteropServices.SafeHandle, Int64, Boolean, Boolean)
at System.Threading.WaitHandle.WaitOne(System.TimeSpan, Boolean)
at GatelessGateSharp.Program.Main()
I am using the Blockchain Driver. This bug will be fixed in the next version. Thank You wasn't sure if it was my miner I'm also running blockchain drivers |
|
|
|
zencash is going to 40$ with the secure nodes
My opinion is this time next year zen will be around $200 this dev team seems to be on top of what's is happening and never leaves the community in the dark I think the team in coin is different from any other |
|
|
|
|
Is there a difference in hashrates between the gtx 1060 and gtx 1060 mini
|
|
|
|
That's an interesting article. I have been personally puzzled by the rush to invest in lots of different ICOs or even a new coin that looks flashy. I picked some new coins to invest in back in 2014, including DNotes, and what's funny is that two of those coins I picked back then I'm still investing in now, and they're like old coins. I've picked up one new coin since then whose future is up in the air but other than that, I'm sticking with the tried and true ones, and trying to add to my holdings as much as I can. One thing that truly puzzles me is the Ethereum phenomenon, and I'm wondering if anyone here would like to comment on it. I avoided Ethereum for the longest time because every time I heard something about it, it was bad. Smart contracts getting hacked, millions of Dollars worth getting lost or held up somewhere in the etherspace where no one could find them until they sort of wandered back home. I wanted nothing to do with it. If I heard of an interesting ICO, I'd look into it and as soon as I learned it was ethereum based I'd drop it like a hot potato. I recently got into the position where I own two different ETH based tokens (one because I thought it was a NEM token and the other because I was kind of forced to--long story). So I finally tried to get a wallet and my first attempt failed repeatedly, until I finally switched to a different wallet. It works, but is very clunky. I guess what I don't understand is how a coin that is so awful can be priced so high and be so popular per coinmarketcap. That's the part I truly do not understand. Why is Ethereum where it is, and not one of a half dozen other coins that do smart contracts and wallets far better? It's crazy I think the same DNOTES and NEM are my favorite coins I also just picked up ZENCASH as my new coin they have a good dev team and keep the community updated with everything that's happening |
|
|
|
|
Zawawa what drivers are you using I have one rig that's giving problems win 10 pro with beta blockchain drivers I'm currently running sgminer nicehash version mining monero on nicehash it seems stable but whenever I try the new GGS my rig crashes with the error below in event viewer also I get kernel power which is probably from a unexpected shutdown do you know what it means should I say screw it and reinstall win 10 pro
Faulting application name: GatelessGateSharp.exe, version: 1.1.1.0, time stamp: 0x5a10f362
Faulting module name: KERNELBASE.dll, version: 10.0.15063.674, time stamp: 0x93d2100b
Exception code: 0xe0434352
Fault offset: 0x0000000000069e08
Faulting process id: 0x1b28
Faulting application start time: 0x01d363de365839c5
Faulting application path: C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\GatelessGateSharp.exe
Faulting module path: C:\Windows\System32\KERNELBASE.dll
Report Id: 7991cce3-6db1-4ed6-a523-a7c40f04d0f1
Faulting package full name:
Faulting package-relative application ID:
I also have .NET runtime error
Application: GatelessGateSharp.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Threading.AbandonedMutexException
at System.Threading.WaitHandle.ThrowAbandonedMutexException()
at System.Threading.WaitHandle.InternalWaitOne(System.Runtime.InteropServices.SafeHandle, Int64, Boolean, Boolean)
at System.Threading.WaitHandle.WaitOne(System.TimeSpan, Boolean)
at GatelessGateSharp.Program.Main()
|
|
|
|
I'm not a linux guy but trying to learn it more so for the linux guys does claymore's clock settings work in ubuntu 16.04 with amdgpu-pro drivers I'm thinking of switching my rigs over my only concern is overclocking and if claymore works with eth mining great but what if I want to switch to monero
Linux is also supported for Claymore's CryptoNote AMD GPU Miner v10.2 https://bitcointalk.org/index.php?topic=638915.0This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more.
There are builds for Windows x64 and Linux x64. No 32-bit support. No NVidia support. command lines are posted at the start of Thread Thank you thinking I'm going to give Ubuntu a shot plus I hate the extra crap you have to go through to stop win 10 updates and Microsoft tracks your every move there's no privacy with windows |
|
|
|
|
I'm not a linux guy but trying to learn it more so for the linux guys does claymore's clock settings work in ubuntu 16.04 with amdgpu-pro drivers I'm thinking of switching my rigs over my only concern is overclocking and if claymore works with eth mining great but what if I want to switch to monero
|
|
|
|
|
Show Posts
