Amazing. While Klaust works well in rig1,2,3 and 4, in addition to being a miner by default. As I have already shown, in the rig5 no.

I have downloaded the Klaust from the same url that you have in Kalust, I have added it to the Rig5 as a miner managed by me, and that works perfectly.

I have not changed anything else, neither oc, nor intensity nor anything. All the same, I only added it separately, and while he brings AW to work with 4 rigs, he does not do it with the fifth one. And this happens to me relatively often sometimes.

You have already seen in the videos when it fails, call Klaust as a miner but at the same time call a coin that is not. I have put FTC to mine in two miners, in one goes, and in another it does not go.

When this happens several times, it is no longer a matter of something that the client has done, it happens sometimes and needs to be revised.

https://www.dropbox.com/s/hydf3jj7mx0agyr/IMG_2289.MOV?dl=0

Now I have a problem with another one of the failures of the program, which has already happened to me several times and I never find a solution.

In this case it is the RIG5, I choose a Neoscrypt coin as Zcore, I teach you in the video that NEoscrypt does with Klaust since basically it is the only good miner of neo, when there are hundreds of coins for this something.

And when I launch it fails, it refers to Neo, to Klaust and I do not know why it also refers to BSD in PHI. In the RIG5 team, Klaust really opens but fails. Now I leave you under the diagnosis. When this happens, it is difficult to fix, and I do not feel like formatting the computer again.

In the rest of RIGS with Neoscrypt and Klaust I have no problems. Other times it has been another RIG and another Something, but sometimes it crosses the information of two coins at a time and fails. because it is clear that what I have chosen from Zcore currency, and I show you the miner and everything.

Let's see if you can dedicate a little time to solve these problems because they become very annoying and they particularly make me lose a lot of time and I only have 5 rigs

DIAGNOSTIC
Initialize diagnostics (20)
Starting Diagnostics. Awesome Miner Remote Agent version: 5.3
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcKlaustMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Set clocking start profile: 36, 80 100--150 (when stopping, the following will be used: 5, type: Single, Use: False)
C:\Users\truco\AppData\Roaming\AwesomeMinerService\ccminer-821-cuda91-x64_1\ccminer.exe   -i 15 --p d=1024 -a neoscrypt -o stratum+tcp://eu.bsod.pw:2130 -u GWS3EYWeoHPv8TkoxPv1YhB3qhJgy6Djvd.rig4 -b 0.0.0.0:4028   (WindowMode: ConsoleFormat, EngineType: CcKlaustMiner, IsProfitMiner: True)
Configuration:

Configured command line:
 -i 15 --p d=1024
Mining Engine Process started, PID: 3260

====================================================================================================
> [2018-07-10 21:35:43] Intensity set to 15, 32768 cuda threads
> ambiguous option -- p
> ccminer 8.21-KlausT (64bit) for nVidia GPUs
> Compiled with Visual Studio 2015 using Nvidia CUDA Toolkit 9.1
>
> Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
> CUDA support by Christian Buchner, Christian H. and DJM34
> Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.
>
> Usage: ccminer [OPTIONS]
> Options:
>   -a, --algo=ALGO specify the hash algorithm to use
>          bitcoin     Bitcoin
>          blake       Blake 256 (SFR/NEOS)
>          blakecoin   Fast Blake 256 (8 rounds)
>          c11         X11 variant
>          deep        Deepcoin
>          dmd-gr      Diamond-Groestl
>          fresh       Freshcoin (shavite 80)
>          fugue256    Fuguecoin
>          groestl     Groestlcoin
>          jackpot     Jackpot (JHA)
>          keccak      Keccak-256 (Maxcoin)
>          luffa       Doomcoin
>          lyra2v2     VertCoin
>          myr-gr      Myriad-Groestl
>          neoscrypt   neoscrypt (FeatherCoin)
>          nist5       NIST5 (TalkCoin)
>          penta       Pentablake hash (5x Blake 512)
>          quark       Quark
>          qubit       Qubit
>          sia         Siacoin (at pools compatible to siamining.com)
>          skein       Skein SHA2 (Skeincoin)
>          s3          S3 (1Coin)
>          x11         X11 (DarkCoin)
>          x13         X13 (MaruCoin)
>          x14         X14
>          x15         X15
>          x17         X17 (peoplecurrency)
>          vanilla     Blake 256 8 rounds
>          whirl       Whirlcoin (old whirlpool)
>          whirlpoolx  Vanillacoin
>   -d, --devices         Comma separated list of CUDA devices to use.
>                         Device IDs start counting from 0! Alternatively takes
>                         string names of your cards like gtx780ti or gt640#2
>                         (matching 2nd gt640 in the PC)
>   -i  --intensity=N     GPU intensity 8-31 (default: auto)
>                         Decimals are allowed for fine tuning
>   -f, --diff-factor     Divide difficulty by this factor (default 1.0)
>   -m, --diff-multiplier Multiply difficulty by this value (default 1.0)
>   -o, --url=URL         URL of mining server
>   -O, --userpass=U:P    username:password pair for mining server
>   -u, --user=USERNAME   username for mining server
>   -p, --pass=PASSWORD   password for mining server
>       --cert=FILE       certificate for mining server using SSL
>   -x, --proxy=...       [PROTOCOL://]HOST[:PORT]  connect through a proxy
>   -t, --threads=N       number of miner threads (default: number of nVidia GPUs)
>   -r, --retries=N       number of times to retry if a network call fails
>                           (default: retry indefinitely)
>   -R, --retry-pause=N   time to pause between retries, in seconds (default: 30)
>   -T, --timeout=N       network timeout, in seconds (default: 270)
>   -s, --scantime=N      upper bound on time spent scanning current work when
>                           long polling is unavailable, in seconds (default: 5)
>   -n, --ndevs           list cuda devices
>   -N, --statsavg        number of samples used to display hashrate (default: 30)
>       --no-gbt          disable getblocktemplate support (height check in solo)
>       --no-longpoll     disable X-Long-Polling support
>       --no-stratum      disable X-Stratum support
>   -e                    disable extranonce
>   -q, --quiet           disable per-thread hashmeter output
>       --no-color        disable colored output
>   -D, --debug           enable debug output
>   -P, --protocol-dump   verbose dump of protocol-level activities
>       --cpu-affinity    set process affinity to cpu core(s), mask 0x3 for cores 0 and 1
>       --cpu-priority    set process priority (default: 0 idle, 2 normal to 5 highest)
>       --cuda-schedule   set CUDA scheduling option:
>                         0: BlockingSync (default)
>                         1: Spin
>                         2: Yield
>   -b, --api-bind=...    IP address and port number for the miner API (example: 127.0.0.1:4068)
>       --logfile=FILE    create logfile
>   -S, --syslog          use system log for output messages
>       --syslog-prefix=... allow to change syslog tool name
>   -B, --background      run the miner in the background
>       --benchmark       run in offline benchmark mode
>       --no-cpu-verify   don't verify the found results
>   -c, --config=FILE     load a JSON-format configuration file
>   -V, --version         display version information and exit
>   -h, --help            display this help text and exit
>       --mem-clock=N     Set the gpu memory max clock (346.72+ driver)
>       --gpu-clock=N     Set the gpu engine max clock (346.72+ driver)
>       --pstate=N        (not for 10xx cards) Set the gpu power state (352.21+ driver)
>       --plimit=N        Set the gpu power limit (352.21+ driver)

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed


and to clarify that I have it right, I'm going to mine it with another RIG and I show you the Zcore configuration, or any NEO currency, so you can see that it's a rare failure, in the same diagnosis there are weird things. I am losing precious time lately with so many failures.

You must find the fault, because this is very sporadic. will see in the video, the same currency in another rig without problems, in rig5, failure. And klaust is a miner by default. I'm going to have to add it separately as mine to try to fix this.

Between the problems with the OC and this, they make me waste a lot of time and therefore money. It seems that I am the only one who finds mistakes or mistakes.

https://www.dropbox.com/s/qvynqh58j6y50v5/IMG_2290.MOV?dl=0

thank you, now I have many more coins, finally I enter coinwarz.

Hi PAtrike I wanted to call attention to a known problem that the weeks go by and there is no solution.

MSI REMOTE, the program is not yours is from a third party, but it is not going well. In the configuration of AW you have to put the exact path where you will be in all the machines, that is, the same folder. Through another user I commented much higher, that sometimes it goes crazy and when the remote starts it closes, and the only way to fix it is to change the folder in the AW configuration, then change it in all the rigs and also change the rule of the programmer of tasks of each rig so that it starts well.

Well, this is happening to me at least once a week. If I take out a rig and change a card, it does not work anymore. Sometimes even without changing anything, just a restart, since it does not load at the beginning.

I have the version to be able to handle the OC, and I see myself many times leaving an Aftherburner in a fixed OC, because I do not feel like doing all that work.

Please have to find a more RELIABLE solution, this is now a patch that gives a lot of work at times. I can not imagine who has 10, 20, 30 rigs each time they fail and have to change the remote in ALL rigs and the rules of the task scheduler.

I do not ask you, mada, I only remind you that this mistake is and it drives me crazy. And that the fault is of the remote server, but it is in your hand to choose another software or develop one of its own that communicates afther burner (or other software) with the central machine, and it is not being deconfigured every few days.

Or you can tell us a faster real solution for when a computer falsely loads the Remote Server, so it appears in the notification box but when you put the mouse on it, it disappears. You have to give us a solution, because it is very annoying, and besides, not managing the OC is a waste of money and I pay more for having that control.

This is not a suggestion of new functions, nor do I ask the moon, I only ask you that what works is fine, and more now in summer that many of us have to change to softer OC in all the protocols.

1.-  no spaces

2.-  https://www.dropbox.com/s/48y55tdlu0v16xv/Captura%20de%20pantalla%202018-07-09%20a%20las%203.31.05.png?dl=0

says as I understand that I have exceeded 300 requests daily, but if I look at statistics every 6 minutes, they make a total of 240 requests.

It can not be that this is something badly implemented. I consider a call, every time I ask for data. I do not believe that each information of each currency counts as a request.

But that happens all day, there are no times when I have coinwarz coins, they never enter me, I never reach the limit. There could be a failure that you can either repair or communicate to the owner of coinwarz in your programming language, they will always pay more attention to you than to me.

It is incredible that even with the payment version of 300 requests can not do it.

If you want I can pass the key to you privately and I disconnect it for you to try it

https://www.dropbox.com/s/i5imtmqu12aokdb/Captura%20de%20pantalla%202018-07-08%20a%20las%2019.45.48.png?dl=0

when using the TEST button it tells me that I have 100,000 requests and left -1, but that -1 is always there. I even think that before paying I did not receive coins either. It may be that your integration of the api does not take into account the payment api ?. I have paid to ask for many coins, as I hope they will pay in WTM and CC, to be able to request every 2 minutes.

And I told you that I put coinwarz first in the list, since they are so rare coins that are not in the others. I go to the COIN tab and I do not have a single coin that indicates that it comes from Coinwarz, only Coincalculator, whatomine and the ones I add for AW CU that does not put the source.

I have deactivated Wtm and CC, I only have the coins that I have added for AW CU, it does not appear anywhere that puts COINWARZ

I'm pretty sure Coinwarz is not working well with AW. I have placed Coinzwar in first place in statistics, also I have paid to have more requests, they are only $ 10.

And looking at the Coin tab, there is not a single coin that indicates that it is coinwarz, and that this first.

Coinwarz has many rare coins that are not in WTM or CC. But they do not appear, please I could review that. I do the test and it gives me correct, I have 100,000 requests daily and I see that I have not spent any, so AW does not collect data from Coinwarz, something is broken.

HSRMINER

Hello Patrike again, 2 things.

1.- In the coin tab, the profit of the pool is not applied, so if I indicate 1.5 to a pool that is equal to 50% more, this is not reflected in Coin, and I think it is very logical that The figure corresponds to the one modified by the profit.

2.- This is a suggestion. It would be ideal to have a function that told me every 24 hours, how many times a currency has changed, and then to know the percentage of time mined in each ALGO. It is very useful because if it changes too much I have to change the configuration, and knowing the time of mining by ALGO, helps me to decide which one to deactivate or not.

On requests to coincalculator. Do you ask for the estimate of 3 hours? would be much more appropriate than 24 or 6 hours, is one of the great advantages of coincalculator

I have noticed a small bug. In options> statistics. I change the order of the three providers. I put first Coincalculator and second WTM.

After a while entering the same section again, WTM is back in the first place, it does not save the configuration on that screen correctly. It does not happen at the moment, it is a long time, or maybe after closing and opening the program. Today I have changed it at least 4 times.

I have a question and I just reviewed all the documentation.

I want to know more about the topic of prioritizing pools in auto swith. I know that somewhere there is a way to define that one group has more priority than another, I think I know where it is, but I do not know if 0 has more priority than 1 or the other way around

Good update and good miners added. But I have a question, it appears in Option> software z enemy 1.12, but then in the configuration of an RIG, right button, edit profile. I do not appear as such, I see a Z enemy without a number. Is that correct? because I see it a bit confusing.

Sorry to be heavy. But remember that you recommended me the way that all the miners mined a single currency. Now I have to try all the rigs one by one, get duplicates of the profiles, and modify the groups so that I have the OC of the miner and the HASH of the MAster. It's a lot of work, really.

This request does not arise from a whim, it is because of the problem of exceeding the minimum entry in some exchanges or lose the coins. If a Pool pays every hour, I have one hour to do the minimum to be accepted by the exchage AND NOT TO LOSE MONEY. And the best way is to point everything to the same currency. This is valid for the vast majority that we have several rigs and we do not have Asics. The asics exceed the minimum easily, but it depends on each rig. It is necessary to send everything to the same currency or pool.

I hope you understand my problem, which will surely be that of many even if you have not noticed.

I do not think that it is difficult for AUTO profit to create a group with the property of following one that it marks, it does not have more mystery. It's a lot like that.

It is much easier to try the new miners, change the OC, give to save and go. Without having to make duplicate profiles by HASH and by OC, to then make the group of personalized profit, understand that it is a lot of mess.

I support the idea of ​​better documentation. It is old, sections are missing and documentation of new functions is not added ...

On statistics, of course it is impossible to have anything real, because everything is based on estimates and there may be large deviations from the estimate to the real. I usually test each pool / currency to modify its profit to be closer to reality.

Even so, you can do some simple statistics. You can take the value of the estimated daily hash (all rigs), take a sample per minute, or every few minutes, and at the end of the day averaging that data.

It is not perfect and there will be deviation, but at least there is a reference, and if I change options, time of profit, if I choose certain currencies, I can see as the days pass the changes in the estimated daily profit averaged. I already say in advance that it is not perfect but it is perfectly useful to know if you are going to get worse or better.

You can do more simple statistics, type: How many times you have changed the currency, so you know if it changes a lot or little. What are the most mined coins in time, gains by Protocol (skein, X16s etc ...) etc ... You can do many things more or less easy to help make decisions. Right now there is nothing to help make decisions.

Better than having nothing, it is better to have estimated values.

Patrike two days ago when it came out install the latest version, the one that brings ccminer 2.3. My surprise has been that Ccminer has not been installed with the update, I had to add it yesterday as managed software and without problems.

I do not know what happened, I updated from the same program, but I do not understand why ccminer 2.3 was not installed. I mention it as a note in case the same thing happens to other people.

Thank you very much, now everything worked. How strange it is to change the folder and therefore the programmer of tasks to launch. Let's see if this gives PAtrike stability, there's a lot of work

I'm having problems with the Aftherburner Remote server. On two computers that I have, it does not initialize, or if it does, but when I put the pointer on it it closes.

They are two newly formatted computers. I downloaded the suggested DLL from the Awesome help page, but it still does not work.

It does like loading, it goes out in the notification area, but when it goes to the icon, it goes and closes. As a result, I can not handle the remote.

It's all in Awesome well configured and I have it installed in the same directory on all machines

The chance gives that the two teams, yesterday one and today another, do not start, I have been trying this for several hours.

Neither pulling it directly or I clicking on the icon, it goes out in the notification area but it disappears and it does not work. The remote rigs are restarted because I can not lower the OC .....

Does anyone know how to fix this problem? , I can think that a computer is crazy, but it is happening to me in two machines ... Last versions of Aftherburner and Remote Server, and updated the DLL as it suggests in Awesome help.
It can not be that it is the only one that is experiencing this.

Video
https://www.dropbox.com/s/m6ehzewa770nxea/IMG_2278.MOV?dl=0

I'm doing it as you suggested. A profile is divided into two, hash and core, and I use the CORE (with intensity and OC of the local miner) and the hash of the miner 3 (which I want to follow)

But it's messy. If I have to change the intensity value, I have to do it in two places, in the complete profile, and in the separate profile to maintain coherence.

I follow him without seeing the difficulty. A special group is created, a master is defined, all others follow the master, and it's over.

Thus each one could have their own profile without dividing and making strange rules.

I already tell you that I am using as you say, but it makes VERY TORPE interact and change values.

Consider creating a special group with that quality. It would not change anything else. You can automatically make all the other miners have the HASH of the MASTER, but managing would be much easier by independent.

PAtrike although I have been a few days without comment, just remember you please consider adding an option so that all rigs mine the same and make it easy.

The trick you told me almost always works, but if I want to change OC or Intensity, it's a tremendous mess.

regards

That option that you ask for exists in the HASH AUGER software, but it is not something that is necessary.

The greatest power is needed every time you mine, to get to the minimum of the wallets.

A process for each card, just as it happened with hash auger, creates a higher load of data and CPU usage, I had to change a CPU to a higher one.

The system is less stable with so many simultaneous wires one for each card and that each card mines a different protocol or currency. The mining machinery that we have the most is a bit fair in CPU to endure that.

It is going against the current, it is always looking more HASH not to divide the hash into small portions that do not represent a high% of Shares.

The best consumption concept, cpu / benefits, is better if the whole machine uses all the power towards the same currency

That is just my opinion. But I have already tried it and it gives many CPU problems and problems with online wallets that require a minimum of shipping to be valid.