@Patrike  average revenue per day, I hope that over time I have a graph. In this way to select 7 days or 30, see a graph with its peaks, falls etc.. And see easily if I go wrong or good.

Surely you already have planned, but hey, I provide ideas.

As it is now, it is only 1 figure, a graph of 7, 15 and 30 days, it would give a more realistic view that if my changes in mining make me win or lose.

and by asking, you will not have the link of the last Z-enemy that is optimized with RTX ?, and I add it from the zip url.

It took me a bit to understand, due to the translations, but I think I already have it as I wanted.

In options> services online, I have unchecked all the nicehash and zpool a-l-g-o-s.

Later on in each RIG, I omit the general configuration and there is active Nicehash and zpool, and I add the Pool to which I am mine. That pool if it has marked the a-l-g-o-s that I want from nicehas and zpool, independently and also several currencies.

Now it seems that it works as I want, I will know it with more certainty when I observe it some more time.

I the problem that I have with the different Equihash is to configure the pool. It is not set equal to dstm, that EWBF than Bminer. Here I am pretty lost.

it is not worth putting the wallet and the strato, you have to add more lines to make it work, they have me crazy with the equihash, I would like it to be easier to configure the equihash independent of the miner. I currently deal with EWBF with a special lien for each A-L-G-O and currency, a terrible mess.

Some help fields or some lines in the documentation would be fine to have these protocols dominated.

Let's see if I explain something better, because the translation can be bad.

I thought that marking the a-l-g-o-s in a pool created to undermine was enough. But you tell me that I have to disable them from options> online services.

It is much simpler, intuitive and easy as I say. I create a pool, I choose some coins, I choose protocols from Zpool and Nicehash, and that's it. That's what I do.

As I indicated, if a protocol deactivated it from options> online services, I could not activate it in a separate pool.

My idea is to have an RIG with many things activated, it would be my RIG spy, and I would say that is what I have to deactivate in the mining pool of the other rigs.

How to explain. I see little usable, little intuitive to have to deactivate a protocol from options> online services, because if I indicate NO, that protocol will not be able to watch it in RIG spy that if it would have activated it in its pool.

I hope that I can clearly understand what I say, and because I see it illogical to have to deactivate it in online services. It should be enough not to mark it in the pool that I define.

Let's see if I find out. It is not good to choose the protocols in the pool. I have to deactivate them from autoproift in options> online services .. If this is a bit cumbersome, I thought that defining the protocols in my particular pool was necessary, as I show in the image that I attached.

And no, in online services I have all the protocols in YES autoprofit, but I assumed that if I chose them in the pool it would be necessary. What happens if I want to have a protocol in one pool if and not in another ?, I could not do it.

https://www.dropbox.com/s/vyympsdsm77ypps/Captura%20de%20pantalla%202018-11-21%20a%20las%2016.37.03.png?dl=0

Yesterday I put an error that I think has been deleted from the forum, I do not know what happened.

It is about the selection of a-l-g-o-s from auto exchange for example nicehash and zpool.

I for example do not have selected hmq1725, and the program is mine. I have activated these two auto exchanges, but then I have a pool created with loose coins and several protocols of Nicehash and Zpool, but many times I see that I am mining for example hmq1725 when I do not have it selected. Something is wrong, it does not respect the selection of my pools. Like I say HMQ happens to me with any other protocol. Please revise.

@moppidoo I appreciate your information but I prefer something more integrated in the same program. The program has to advance and offer that calculator more.

I have more obligations although if I use a lot of time in cryptos, I can not be doing formulas in Excel and using the API, when it is a subject in which I do not have much knowledge. I'm sure that the video serves many, and others like me who prefer it integrated directly in AM

It would also be good that AM, scrape the prices of the different Echanges, so it does not matter the source of the coins, you can specify your the exchange. There are many coins that give an unreal price because they simply show the highest price and maybe they have run out of exchange and only reflects the last price, or that an exchange has the wallet in maintenance and is giving me that price and not where I sell.

I bet on Shit to mine or similar as the fourth source of coins.

For the rest I use a lot of AW CU to add coins manually, but you have to check the rewards constantly.

https://www.dropbox.com/s/nbqyh9h94pmlm1c/Captura%20de%20pantalla%202018-11-20%20a%20las%202.48.36.png?dl=0
In that report it indicates:

Unspect Skunhash

But it does not tell me in which pool of auto change it has done, if zpool, if nicehash or any other that has activated.

I think I found a fault or a bad performance

I activate coins, nicehash and Zpool. But in Zpool I only activate protocols that are not in nicehash. For example, not active in Zpool Neoscrypt. But ignore it, mine that "A-l-g-o" even though I do not have it selected in the coin pool and auto exchange.

That did not happen before, and I've been watching it for a few weeks. "a-l-g-o-s" that I do not have activated in zpool, mine, ignore my configuration

https://www.dropbox.com/s/6s5ius0fulxjiyw/Captura%20de%20pantalla%202018-11-20%20a%20las%202.25.46.png?dl=0
In this information box, my suggestion is that two columns are missing. One to say the amount of changes in that currency, and another to say the miner.

So I can see with which miner I am using each coin, and I can see how many times it has had to change in auto profit to get that%, something that is quite important. The knowledge also that I am mining each coin also I see it very useful.

I hope not to bore you with my suggestions.

I love the new statistics and I know that you are going to improve it, I just want to provide a piece of information.

I think it is important in addition to knowing the% of time that has been mining a currency or protocol, knowing how many changes.
It is not the same that a currency has mined 20% of time with only 3 changes, that 20% and that has made 25 changes to obtain it.
Obviously 20% with only 3 changes is much more stable than 20% in 25 changes that will be a huge waste of time changing again and again, and that means that protocol falls quickly because they mine too much.

I hope you understand what I mean. Knowing the number of times that change in each currency to get the%, is a very interesting data to optimize.

I do not know how to thank you. It makes me very happy, I know it is the first step towards better statistics, but already with this I have seen it is a HUGE step in the control of what we do and in the decision making process.

Thank you very much for being a developer who listens to your community.

is another new one, I have added it manually and I had to activate it in EWBF that came by default disabled. between the Equihash and the cryptonight they are going to bury us

cryptohub  hacked, no run
https://altex.exchange/   no run.


Both in AW CU = problem

A tip, do not use intensity -i 21 for example, it usually gives problems if you indicate intensity. Lower the core of the OC a little.

I suppose you will have activated t-rex on each Rig in your profit profile.

Disable antivirus and firewall in all rigs.

@soothaa screen capture errror

https://www.dropbox.com/s/ij32ve7wz4rct3p/Captura%20de%20pantalla%202018-11-19%20a%20las%201.44.36.png?dl=0

Hello, I inform you that there is a bug in some exchange and when the program is launched to update prices, after a while it gives an exception error and closes without updating, right now it is unusable.

Surely you have changed some exchange the api or have restricted access, and causes your program to close and not update anything.

I know I insist but I want to give numerous proofs.

BTX Coinscalculator gives me the price of cryptopia with a value of 9060 satochis, but the Wallet in Cryptopia is in maintenance. The next Crex24 allows you to deposit and sell, but its price is 7500 satochis.

With which, I can not mine BTX because it gets the price of Cryptopia. If I know that I can more or less adjust using the profit, but that is a fudge if you do it in many currencies.

It is only to give interest to the issue of how important the option can be, that I know that you have it in mind, and I know that you will be able to do it when you can. I just give constant examples of how important it is.

Apart I am looking forward to seeing the new update for two reasons. The beginning of the new statistics that are so important to know what we do, and the update of miners, the new z-enemy already comes with a plus of better performance in RTX.

I do not want to add new miners, I prefer to wait for their updates, or that you provide me with the correct url of downloading the latest version to use while updating it.

I can not express how happy I bought this software and recommended it, the best money spent on cryptos that I have made.

new Algo  Equihash 200,9  please add

Problem solved the change of OC. The 1803 distribution has network problems, I installed the last of October 1809 that is ready to install or update. That has fixed my problem, now in each rig to put http: // localhost: 82 / macm and asks me for the login and pass.

So the whole problem is release 1803, or stay in 1709 or go to 1809 to not have these problems. I hope to help.