I would love this!  My equipment is ready for your order anytime you like. To be able to give a price, i need to know what type of coffee you want, and quantity in grams or kg. Can do any amount you desire, from 100grams and up  Pm me for your order or further conversation on this delicius topic! Regards |
|
|
|
|
Hi all!
I am a norwegian coffee "snob" who imports luxury green gourmet coffee from around the world, where only the best is good enough!
i have professional roaster and can roast to your preference, or recomend a roast if you describe what you like, espresso or regular.
If you dont have a grinder, i can grind it for you, but grind coffee looses aroma alot faster than whole beans.
This is not cheap coffe...
But you get exactly what you pay for, some of the best coffees in the world, delivered to your door.
Just had to share my hobby and passion to other fellow miners who might also want the best coffe!
Let me know if you have any questions or would like to order.
If you want to use escrow, since i am relative new here, this is perfectly fine, but you pay fees.
Also only trusted escrow services is acepted.
Payment is very flexible, BTC,LTC paypal, wire transfer, ukash or similar can be discused.
Hope to hear from others who loves the best cup of Espresso/coffee!
Regards from Norway,
the most expensive country in the world?
|
|
|
|
very interesting! Want minimum 1 big one!  |
|
|
|
Can anybody link step-by-step instructions how to upgrade cgminer to the latest version on Jupiters?
Chill a few about to share the latest firmware with the latest CGMiner binary 3.9.0. compiled within as well as a couple of bug fixes. Hold tight a few minutes... Note: The problems addressed have been observed to manifest largely with the Eligius pool, however we can't say for definite it is exclusively associated with that pool, but the settings within Eligius previously compounded the issue. So expect to see a drop in HW error rate. I will drop it in this thread, but don't currently have access to the site to update the main page, no doubt Sam will do that when he has an opportunity, but I have a flight to catch. V and I just want you to have this to play with sooner, than later... In any case as always keep us abreast of what you observe and constructive feedback is always welcome!  Merry Xmas, God Jul, Joyeux Noel, Feliz Navidad, Fröhliche Weihnachten, Sheng Dan Kuai Le, S rozhdyestvom Hristovym! etc...sorry if i've missed anyone out I could be here all night otherwise, you get the idea Marry xmas I have already prepared my red xmas outfit  I know we have some nerds here, but man! So when did KNC start handing out free t-shirts? I never got one. Only certain customer's? Local pickup customers got em ;-) |
|
|
|
|
6btc, escrowed. Bid valid 24hours from now.
:-)
|
|
|
|
Design contest?
Sample chips?
32 sample chips are provided along with orders. | Voltage(V) | Core Frequency(MHz) | Hash Rate(GH/s) | Current(A) | Power Consumption(W) | Power Efficiency(J/GH) | | | | | 0.75 | 200 | 1.60 | 1.423 | 1.07 | 0.681 | | | | | 0.85 | 250 | 2.00 | 1.993 | 1.69 | 0.847 | | | | | 1.00 | 312.5 | 2.50 | 2.821 | 2.82 | 1.128 | | | | | 1.10 | 350 | 2.80 | 3.359 | 3.70 | 1.32 | | | | | 1.25 | 400 | 3.20 | 4.205 | 5.26 | 1.643 | | | | |
No wondering if they have sample chips for a contest in board design? I know they provide samples. Sorry wasn't clear Beastly. We are likely to have our prototype ready in December for a 24 chip BM1380 Wasp x 8 in our Hive. 'Tunable' from 147 Gh/s up to 612 Gh/s Any idea about prices yet? +1 |
|
|
|
Hi
I am looking to make some money, what can I buy in Australia and ship overseas that's in demand?
Cigarettes, there are a lot of people selling cigarettes and sending them to other countries to make money, because it is cheaper in OZ. Do a search of Cheap Cigarettes, you will see a lot of them are export from OZ. Are you bloody kidding? Ciggies here in Australia are like the most expensive in the world! At my work a 20 pack of winfield is AUD$18.50 (about $16.60 USD)! My MRS bought a carton of 160 longbeach smokes, and a 50g pack of winfield tabacco from the supermarket, and it was $150! cheap my skinny bum! Then you should come to Norway... The most expensive country in the world? :-) |
|
|
|
3-500 chips depending on total cost  |
|
|
|
Very interesting! I have my eyes on you... |
|
|
|
Bitmain, i send you a PM about the chips, can you please take 2 minute and answer?
Thanks and PM answered. Updated with a newly added policy, Paying extra 10% can accelerate the lead time to 4 weeks.We have already made the documents we think is completed for building a miner with our chip. We will send to some community member to review for two or three days, and we can know whether there is something that will make other EE confused or hard to understand. Then we release all the documents to the public. make sure to send to burnin. he does good boards. Any thoughts of making rackminers? like U3 size but 500GH++. We are considering building rack miners with bit main chips. They would be roughly 900Gh/s That would be of interest! price est? |
|
|
|
My 2 miners are running thanks to sushi who had a long teamviewer session with me to fix my problem. During this buy hes been nothing but amazing, communacation with the guy couldnt be any better.
If you appreciate how he is doing this group buy do what I did and sent him a little something , he deserves it.
Totaly agree! He spent over an hour with me too. Will send alitle something your way today sushi! Thank you for the superp service :-) Regards |
|
|
|
ill get mines soon Awesome - let me know what you think it's definitely time to replace the old block erupters I have 3 in my possession, No problems with any of the ants themselves. They have all been running stable since day one. They may seem a tad expensive but what else are gonna buy right now. I have 3 ants to. Running very stable and no problems with em. Best customer service available with sushi! Will be getting more ants :-) Happy hashing :-) |
|
|
|
|
Would be interested in racks of this... Not usb :-)
|
|
|
|
|
I want to have fun!
Count me in :-)
|
|
|
|
|
I just want to let you know how great service sushi and bitmain gives.
I am relative new to mining and had a knc before ordering with sushi.
Sushi replied very fast, both on pm and email, also gave support after product was recieved.
Hi did it on his own free time, and did not charge anything at all.
He spent over an hour helping me optimize my miners, since i didnt know how, he did it for me :-) free, and still the perfect customer support!
And now, they ship items BEFORE the promised date!
The miner is a good product and if you think customer service is important, i dont think you can find a better deal.
Thank you sushi and bitmain for delivering more than i paid for!
Regards
|
|
|
|
Interested in finish made racks... :-)
Must be asembled since i cant!
Yes they will all be completely assembled. Most def interested. How will price end up compared to the antminer? 180ghs @ 4ish btc Regards |
|
|
|
|
Interested in finish made racks... :-)
Must be asembled since i cant!
|
|
|
|
|
I take one if more is available :-)
|
|
|
|
|
Seems to be monday delivery for my ants... How many got the shipment inspected by customs? Seems that is why its not delivered, thanx sushi and bitmain for fast and exelent service!
Did not know i was having a ant farm when adult! :-)
|
|
|
|
|
Show Posts
