Yo, but i use root for every time  so i dont think that i need sudo. Yes i have soon read this, but the compile fails ^^
Oops, forgot to add sudo  Post updated. |
|
|
|
Yes i have soon read this, but the compile fails ^^ Great howto Zich!
Have you any idea why freezing the whole RPI out with cgminer 4.0.0 in 1 min? With the older version 3.12.3 works fine.
And the other thing:
root@rpi:~/cgminer# gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api
api-example.c:14:20: fatal error: config.h: No such file or directory
compilation terminated.
No idea about that, it's work just fine on my Rpi. About api compile, did you run it on right directory? if yes you should be able to see compile instruction on api-example.c |
|
|
|
|
Great howto Zich!
Have you any idea why freezing the whole RPI out with cgminer 4.0.0 in 1 min? With the older version 3.12.3 works fine.
And the other thing:
root@rpi:~/cgminer# gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api
api-example.c:14:20: fatal error: config.h: No such file or directory
compilation terminated.
|
|
|
|
Nalam nem latszodik a ref linked. Valoszinuleg azert mert az alairasba raktad bele. Ha jol emlekszem azt mar itt is cenzurazzak. Igen megtettem mar, mint ahogy bitcoin.hu forumba is regebben letrehoztam topicot, mint ahogy te is a napokba:) Mostanában bányászt venni elég nehéz úgy hogy jól kijöjjön belőle az ember. Én is eladtam egy részét, ami megmaradt azt meg a Cex-en kiegészítettem cloud mininggel. Most eléggé lement az ára, 7 USD/GH áron azonnali teljesítményt kapni, ráadásul bármikor eladható, nem marad a nyakamon a cucc ha már nem akarok élni vele. Ha valakinek nem sürgős kivenni a bányászott btc-t akár azonnal vásárolhat újabb teljesítményt. Legutóbb 10%-ot emelkedett a diff. ezt már meg lehet előzni ha újra befektetem. Ha esetleg valakit érdekel és kipróbálná, és lenne olyan kedves hogy az én refferal linkemen regisztrál, azt nagyon megköszönöm. https://cex.io/r/0/Mohabmw/0/A refi linked elmaradt, beirjam az enyimet?  Akinek reszletes tajekoztatas kell mi hogy mukodik a cexen, irhat ram privit:) Eddig is megtehetted volna. Mellesleg ha ref linket adok akkor nyilván tájékoztatást is, ha valakit érdekelnek a részletek. De persze, írd be nyugodtan. |
|
|
|
Mostanában bányászt venni elég nehéz úgy hogy jól kijöjjön belőle az ember. Én is eladtam egy részét, ami megmaradt azt meg a Cex-en kiegészítettem cloud mininggel. Most eléggé lement az ára, 7 USD/GH áron azonnali teljesítményt kapni, ráadásul bármikor eladható, nem marad a nyakamon a cucc ha már nem akarok élni vele. Ha valakinek nem sürgős kivenni a bányászott btc-t akár azonnal vásárolhat újabb teljesítményt. Legutóbb 10%-ot emelkedett a diff. ezt már meg lehet előzni ha újra befektetem. Ha esetleg valakit érdekel és kipróbálná, és lenne olyan kedves hogy az én refferal linkemen regisztrál, azt nagyon megköszönöm. https://cex.io/r/0/Mohabmw/0/A refi linked elmaradt, beirjam az enyimet? Akinek reszletes tajekoztatas kell mi hogy mukodik a cexen, irhat ram privit:) |
|
|
|
Thank you. When i plug 5 hex8 miner to the RPI, then the CPU usage goes up to 99%. I dont have any solution for this, i use now 2 rpi's. Is that it? Mem: 16400K used, 12956K free, 0K shrd, 1724K buff, 4620K cached
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
|
|
|
|
Can u please write me a "top" result with these miners?! It looks like 6 is too much for one router... cgminer version 4.0.0 - Started: [2014-03-12 16:30:02]
------------------------------------------------------------------------------------------
(5s):1.631T (avg):1.576Th/s | A:937986 R:3484 HW:6 WU:26.4/m
ST: 1 SS: 3 NB: 4 LW: 953634 GF: 0 RF: 1
Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
Block: e1864380... Diff:3.82G Started: [17:12:31] Best share: 541K
------------------------------------------------------------------------------------------
[U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU: 4.7/m
001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R: 78/0.05% HW:2/0.98% WU: 4.7/m
002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU: 4.5/m
003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R: 68/0.05% HW:0/0.00% WU: 4.0/m
004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU: 4.5/m
005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R: 50/0.03% HW:0/0.00% WU: 4.0/m
------------------------------------------------------------------------------------------
[2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
[2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
[2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
[2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
[2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
[2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
[2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
[2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
[2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
[2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
[2014-03-12 17:12:31] Stratum from pool 0 detected new block
[2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
[2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
[2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
[2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
[2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
[2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
[2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0
And I still need to plug in more... But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough... |
|
|
|
I have the usb hub what u recommended, but this issue is not here, is at my friend. I can not understand this, why is tplink to better than RPI? Thanks for advice:) BR: -iFA88 Hy again!:) The five hex8 now work nice with 52% CPU use. But when i connect one hexC or hexB then the CPU spin up to 100% and the performance decreases on all board. While this the hex8 board red light pulses. Now i have two RPI. One for 2xHexB 1xHexC and for the other 5xHex7. Any idea? Thanks! I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice.
Is there any solution to config less work to the cgminer?
Thanks!
Sure --set-dif-to-one 0 Check my spelling though it is written in chnagelog. And make sure you are using latest version -you will know it when you see pool reject rate % in screen session Get a TP-Link TL-3020 it kicks the ass of the RPi. Red light of hex 8 means it has no work. USB writes are taking too long for some reason. It seems some USB issue. Try with other hub or use the one I have recommended .... And finally tplink if all fails However if all is good at two pi's follow golden rule if it works do not touch it  |
|
|
|
Hy again!:) The five hex8 now work nice with 52% CPU use. But when i connect one hexC or hexB then the CPU spin up to 100% and the performance decreases on all board. While this the hex8 board red light pulses. Now i have two RPI. One for 2xHexB 1xHexC and for the other 5xHex7. Any idea? Thanks! I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice.
Is there any solution to config less work to the cgminer?
Thanks!
Sure --set-dif-to-one 0 Check my spelling though it is written in chnagelog. And make sure you are using latest version -you will know it when you see pool reject rate % in screen session |
|
|
|
|
I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice.
Is there any solution to config less work to the cgminer?
Thanks!
|
|
|
|
My bank (Erste bank Hungary) has refused the cancel because the money is soon arrived to the others balance. Hi @all so i did higher deposit at the 24.02.14 - advised my bank to cancel it but they made a mistake and it gone through  not that i have a pending withdraw with 45500€ .... i work on it to recover it from my bank - hope i get it but it doesnt look as good as i want.... today they informed me about the answer from WBK Poland. following: Please be informed that your inquiry is under investigation. We can confirm that the payment was executed and your account has bin credited. at the moment beneficiary is not available and we are not able to return the funds. unfortunately according to polish law we cannot give you more detailed information.... so i think WBK works but from the bankruptcy statement on they are also involved and under investigation of the court. bankruptcy protection protects MtGox for any sue. So - sadly!!! - i think we can do nothing.... also i tried to phone this callcenter - so way, always busy... thats just what i think - any further ideas helping out is highly appreciated. |
|
|
|
OMG my bank refuse that. The money is arrived and bank wash his hands.. they say i should find a lawyer for that.. nice. OMG. Hy there!
I have send on 2014.02.24. from my Hungarian bank to the mtgox Polland bank address 500 euro.
There is any chance this money to refer back into my account?
Best regards:
-Andor Rajci
Hungary
You should ask that your bank, not random strangers on an internet forum. OMG are you people for real? |
|
|
|
Hy! I'm with you. I have on 2014.02.24. 500 euro deposited. And now its the site down and bankruptcy... When u need my details send me a PM. Thanks! I am preparing to sue mt.gox poland for fraud (art. 286 #2, #3, #4) and misleading (art. 286 #1) The first person to get arrested will be this fucking scammer representative of mt.gox poland named Bartlomiej Szabat because in poland for something like this you just get arrested straight away until proven NOT GUILTY. This is not regarding bitcoins but the currency deposits. I have already spoken with my lawyer and we need to act asap in case they close polish mt.gox. I might need more users that deposited money in to mt'gox polish bank WBK Bank Zachodni, to be 100% successful. Whos with me on this1??
|
|
|
|
|
Hy there!
I have send on 2014.02.24. from my Hungarian bank to the mtgox Polland bank address 500 euro.
There is any chance this money to refer back into my account?
Best regards:
-Andor Rajci
Hungary
|
|
|
|
Anyone know what its this? This appears 1-2x pro week. Alfter this, i have to pull out the first USB hub from the RPI (model A). The simple reboot of the RPI did not help. I have soon 3 usb hub tested, and all have this problem. It may occur that the RPI has anything hardware problem? example polyfuse? i have 6x hex16 1x hex8a1. syslog: Feb 25 09:50:24 rpi cgminer: Deamon: Restarting..
Feb 25 09:51:12 rpi cgminer: Deamon: Get time failed!
Feb 25 09:51:12 rpi cgminer: Deamon: Started
Feb 25 09:51:14 rpi kernel: [50285.530158] usb 1-1.1.6: reset full-speed USB device number 70 using dwc_otg
Feb 25 09:51:15 rpi kernel: [50285.710225] usb 1-1.1.5: reset full-speed USB device number 69 using dwc_otg
Feb 25 09:51:15 rpi kernel: [50285.890232] usb 1-1.1.4: reset full-speed USB device number 68 using dwc_otg
Feb 25 09:51:15 rpi kernel: [50286.070507] usb 1-1.1.7: reset full-speed USB device number 71 using dwc_otg
Feb 25 09:51:15 rpi kernel: [50286.251332] usb 1-1.1.3: reset full-speed USB device number 67 using dwc_otg
Feb 25 09:51:15 rpi kernel: [50286.430215] usb 1-1.1.2: reset full-speed USB device number 66 using dwc_otg
Feb 25 09:54:05 rpi kernel: [50456.082587] irq 32: nobody cared (try booting with the "irqpoll" option)
Feb 25 09:54:05 rpi kernel: [50456.082625] CPU: 0 PID: 11413 Comm: cg@hexc_recv/2 Not tainted 3.10.30+ #642
Feb 25 09:54:05 rpi kernel: [50456.082693] [<c0013a24>] (unwind_backtrace+0x0/0xf0) from [<c0010d7c>] (show_stack+0x10/0x14)
Feb 25 09:54:05 rpi kernel: [50456.082735] [<c0010d7c>] (show_stack+0x10/0x14) from [<c007ddc0>] (__report_bad_irq+0x20/0xe4)
Feb 25 09:54:05 rpi kernel: [50456.082763] [<c007ddc0>] (__report_bad_irq+0x20/0xe4) from [<c007e274>] (note_interrupt+0x1c4/0x224)
Feb 25 09:54:05 rpi kernel: [50456.082788] [<c007e274>] (note_interrupt+0x1c4/0x224) from [<c007c548>] (handle_irq_event_percpu+0xac/0x1b0)
Feb 25 09:54:05 rpi kernel: [50456.082811] [<c007c548>] (handle_irq_event_percpu+0xac/0x1b0) from [<c007c6a0>] (handle_irq_event+0x54/0x84)
Feb 25 09:54:05 rpi kernel: [50456.082834] [<c007c6a0>] (handle_irq_event+0x54/0x84) from [<c007ea80>] (handle_level_irq+0x98/0x108)
Feb 25 09:54:05 rpi kernel: [50456.082857] [<c007ea80>] (handle_level_irq+0x98/0x108) from [<c007bde4>] (generic_handle_irq+0x28/0x40)
Feb 25 09:54:05 rpi kernel: [50456.082881] [<c007bde4>] (generic_handle_irq+0x28/0x40) from [<c000e9ac>] (handle_IRQ+0x30/0x84)
Feb 25 09:54:05 rpi kernel: [50456.082919] [<c000e9ac>] (handle_IRQ+0x30/0x84) from [<c0402a14>] (__irq_svc+0x34/0xc8)
Feb 25 09:54:05 rpi kernel: [50456.082959] [<c0402a14>] (__irq_svc+0x34/0xc8) from [<c0025b80>] (__do_softirq+0x94/0x19c)
Feb 25 09:54:05 rpi kernel: [50456.082983] [<c0025b80>] (__do_softirq+0x94/0x19c) from [<c0025d1c>] (do_softirq+0x48/0x54)
Feb 25 09:54:05 rpi kernel: [50456.083006] [<c0025d1c>] (do_softirq+0x48/0x54) from [<c0025f8c>] (irq_exit+0x8c/0xc8)
Feb 25 09:54:05 rpi kernel: [50456.083031] [<c0025f8c>] (irq_exit+0x8c/0xc8) from [<c000e9b0>] (handle_IRQ+0x34/0x84)
Feb 25 09:54:05 rpi kernel: [50456.083057] [<c000e9b0>] (handle_IRQ+0x34/0x84) from [<c0402a14>] (__irq_svc+0x34/0xc8)
Feb 25 09:54:05 rpi kernel: [50456.083087] [<c0402a14>] (__irq_svc+0x34/0xc8) from [<c005bfb8>] (futex_requeue+0x3f4/0x7a8)
Feb 25 09:54:05 rpi kernel: [50456.083111] [<c005bfb8>] (futex_requeue+0x3f4/0x7a8) from [<c005d0cc>] (do_futex+0x15c/0xa84)
Feb 25 09:54:05 rpi kernel: [50456.083133] [<c005d0cc>] (do_futex+0x15c/0xa84) from [<c005da80>] (SyS_futex+0x8c/0x168)
Feb 25 09:54:05 rpi kernel: [50456.083156] [<c005da80>] (SyS_futex+0x8c/0x168) from [<c000dac0>] (ret_fast_syscall+0x0/0x30)
Feb 25 09:54:05 rpi kernel: [50456.083166] handlers:
Feb 25 09:54:05 rpi kernel: [50456.083196] [<c02d02a0>] dwc_otg_common_irq
Feb 25 09:54:05 rpi kernel: [50456.083215] [<c02dca84>] dwc_otg_pcd_irq
Feb 25 09:54:05 rpi kernel: [50456.083244] [<c02c12a8>] usb_hcd_irq
Feb 25 09:54:05 rpi kernel: [50456.083255] Disabling IRQ #32
Feb 25 09:54:05 rpi kernel: [50456.087986] hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
Feb 25 09:54:05 rpi kernel: [50456.088033] usb 1-1: USB disconnect, device number 2
Feb 25 09:54:05 rpi kernel: [50456.088051] usb 1-1.1: USB disconnect, device number 64
Feb 25 09:54:05 rpi kernel: [50456.088066] usb 1-1.1.1: USB disconnect, device number 65
Feb 25 09:54:05 rpi kernel: [50456.094004] usb 1-1.1.2: USB disconnect, device number 66
Feb 25 09:54:05 rpi kernel: [50456.096914] usb 1-1.1.3: USB disconnect, device number 67
Feb 25 09:54:05 rpi kernel: [50456.097650] usb 1-1.1.4: USB disconnect, device number 68
Feb 25 09:54:05 rpi kernel: [50456.098338] usb 1-1.1.5: USB disconnect, device number 69
Feb 25 09:54:05 rpi kernel: [50456.100241] usb 1-1.1.6: USB disconnect, device number 70
Feb 25 09:54:05 rpi kernel: [50456.101344] usb 1-1.1.7: USB disconnect, device number 71
Feb 25 09:54:05 rpi kernel: [50456.106311] usb 1-1.3: USB disconnect, device number 4
Feb 25 09:54:05 rpi kernel: [50456.130079] wlan0: deauthenticating from 64:66:b3:be:41:5a by local choice (reason=3)
Feb 25 09:54:06 rpi wpa_supplicant[1716]: wlan0: CTRL-EVENT-DISCONNECTED bssid=64:66:b3:be:41:5a reason=3
Feb 25 09:54:06 rpi kernel: [50457.092257] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x0040bacc AR_DIAG_SW=0x0040bacc DMADBG_7=0x0040bacc
Feb 25 09:54:06 rpi kernel: [50457.120774] ath: phy0: Failed to wakeup in 500us
Feb 25 09:54:06 rpi kernel: [50457.129825] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x0040bacc AR_DIAG_SW=0x0040bacc DMADBG_7=0x0040bacc
Feb 25 09:54:06 rpi kernel: [50457.140137] cfg80211: Calling CRDA for country: CN
Feb 25 09:54:06 rpi wpa_action: WPA_IFACE=wlan0 WPA_ACTION=DISCONNECTED
Feb 25 09:54:06 rpi wpa_action: WPA_ID=0 WPA_ID_STR= WPA_CTRL_DIR=/var/run/wpa_supplicant
Feb 25 09:54:06 rpi kernel: [50457.198855] ath: phy0: Failed to wakeup in 500us
Feb 25 09:54:06 rpi kernel: [50457.208819] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x0040bacc AR_DIAG_SW=0x0040bacc DMADBG_7=0x0040bacc
Feb 25 09:54:06 rpi wpa_action: ifdown wlan0
Feb 25 09:54:06 rpi kernel: [50457.229174] ath: phy0: Failed to wakeup in 500us
Feb 25 09:54:06 rpi dhclient: receive_packet failed on wlan0: Network is down
Feb 25 09:54:06 rpi kernel: [50457.256492] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x0040bacc AR_DIAG_SW=0x0040bacc DMADBG_7=0x0040bacc
Feb 25 09:54:06 rpi kernel: [50457.361045] usb 1-1.3: ath9k_htc: USB layer deinitialized
Feb 25 09:54:06 rpi kernel: [50457.361678] usb 1-1.4: USB disconnect, device number 5
Feb 25 09:54:06 rpi kernel: [50457.520079] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:06 rpi dhclient: Internet Systems Consortium DHCP Client 4.2.2
Feb 25 09:54:06 rpi dhclient: Copyright 2004-2011 Internet Systems Consortium.
Feb 25 09:54:06 rpi dhclient: All rights reserved.
Feb 25 09:54:06 rpi dhclient: For info, please visit https://www.isc.org/software/dhcp/
Feb 25 09:54:06 rpi dhclient:
Feb 25 09:54:07 rpi dhclient: Bind socket to interface: No such device
Feb 25 09:54:07 rpi wpa_action: removing sendsigs omission pidfile: /run/sendsigs.omit.d/wpasupplicant.wpa_supplicant.wlan0.pid
Feb 25 09:54:07 rpi kernel: [50457.960139] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:07 rpi ifplugd(wlan0)[1632]: Link beat lost.
Feb 25 09:54:07 rpi wpa_supplicant[1716]: wlan0: Failed to initiate AP scan
Feb 25 09:54:07 rpi kernel: [50458.350060] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:07 rpi ifplugd(wlan0)[1632]: Exiting.
Feb 25 09:54:08 rpi kernel: [50458.689967] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:08 rpi kernel: [50458.959963] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:08 rpi kernel: [50459.229985] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Feb 25 09:54:08 rpi kernel: [50459.230077] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:08 rpi kernel: [50459.349969] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:09 rpi kernel: [50459.619965] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:09 rpi kernel: [50459.889973] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:09 rpi kernel: [50460.159962] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:09 rpi kernel: [50460.429981] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Feb 25 09:54:09 rpi kernel: [50460.430073] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:09 rpi kernel: [50460.550056] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:10 rpi kernel: [50460.819963] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:10 rpi kernel: [50461.090052] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:10 rpi kernel: [50461.360013] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:11 rpi kernel: [50461.629974] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Feb 25 09:54:11 rpi kernel: [50461.630062] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:11 rpi kernel: [50461.750010] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:11 rpi kernel: [50462.019972] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:11 rpi kernel: [50462.290000] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:11 rpi kernel: [50462.559979] Indeed it is in host mode hprt0 = 00001501
Feb 25 09:54:12 rpi kernel: [50462.830410] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Feb 25 09:54:12 rpi kernel: [50462.830476] hub 1-0:1.0: unable to enumerate USB device on port 1
lsusb: Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 004: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287]
Bus 001 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 006: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 007: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 008: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 009: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 010: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 011: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 012: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
|
|
|
|
A fast question, there is any solution for that the hex16a2 mini USB power dont give backward 5volt ? When i cut the usb cable red and black cables, then the board dont work.
Thanks.
Wierd, when I taped out the outer pins on my troublesome Hex16B board's cable, it worked fine. (also work on Hex8A1, but it was something else that was the problem, needed a fan on the 5v PSU line, to help regulate the PSU.) Are you sure you didn't damage the data cables? If you are, try adding back the ground. If that don't work you could try +5v and ground powered from a 5v PSU line (Red/Black), with more Amps in the PSU it shouldn't flow back, and PSU is designed to handle bad loads if it did. Hy! I dont have 5 volt on the PSU. At the first moment was worked. And then when i restarted the PSU the board Led don't Light up and the Rpi dont see the board. When i plug the red/black back then works fine. The fan worked fine on all two try. |
|
|
|
Splitting hairs here, but that's CGminer 3.12.3, and I seen Marto's screen shot (a couple of posts up) with version 4.0.0.  This is new version still in tests A fast question, there is any solution for that the hex16a2 mini USB power dont give backward 5volt ? When i cut the usb cable red and black cables, then the board dont work. Thanks. |
|
|
|
Marto please answer to my friend ^^ @Marto74 (1) I would like to ask for a refund for my order that is more than 2 months old now. Order reference: UICAWGFJD OR I would like to get a HEX8A1 card as a form of consolation (2) Why don't you react to messages sent to technobit.eu? Best regards, W Marto, please answer. Order ref is UICAWGFJD |
|
|
|
Sziasztok! én is kezdem most termelni a hozzászólásokat Ezzel a csodalatos nevvel? |
|
|
|
|
Show Posts
