[ANN] Technobit HEX8A1 -240 GHs Coincraft A1 board- Finished production

[marto74]

USE BIGGER LETTERS PLEASE

[southerngentuk]

Dear forum/thread members...

I have received a refund for my order (marto still has those now useless chips, my loss).

Four months has passed since the expected delivery date, therefore I do not in anyway feel satisfied.

This does however bring an element of closure so I can stop pestering in Marto's threads.

My apologies to all who have had to put up with my constant posts, I wish it could have been done in a different manner but when PM's are Ignored it leaves little options.

Regards to all

SoutherngentUK

[Lucko]

How do I stop NTPD starting on router? I did that once but can't remember what worked at the end...

[grana]

USE BIGGER LETTERS PLEASE

and you will get every day!

My apologies to all too, I wish it could have been done in a different manner.

[ZBC3]

Martin,

You sent my bitfury miners immediately after receiving my bitfury chips. It took a total of 7 days to complete an order that was supposed to take 4 weeks. Additionally you sent my avalon gen 2 miners within 5 days of ordering (before the 48 shipping was introduced).


блaгoдapя, блaгoдapя, блaгoдapя

I'm a repeat customer of Technobit, but if they keep exceeding my expectations and providing quality customer service then I'll take my money to Terrahash.

[gcube1305]

USE BIGGER LETTERS PLEASE

and you will get every day!

My apologies to all too, I wish it could have been done in a different manner.

I have been refunded and i did not use the "huge red letter" method...
So you can apologize, but would be better to not spam this topic.

[marto74]

USE BIGGER LETTERS PLEASE

and you will get every day!

My apologies to all too, I wish it could have been done in a different manner.

Great,
Please do not forget to mention that
YOU GOT YOUR ORDER WITH +25 % of the HASING RATE FOR 5 WEEKS DELAY
I think you can do better with big letters
Almost 2-3 rimes bigger

Best Martin

[Lucko]

Can someone help me figure out what I'm I doing wrong.

Set router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r

and I see this

Code:

ntpd: resolved peer 3.openwrt.pool.ntp.org to 89.212.75.6
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock

[Zich]

Can someone help me figure out what I'm I doing wrong.

Set router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r

and I see this

Code:

ntpd: resolved peer 3.openwrt.pool.ntp.org to 89.212.75.6
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock

DNS problem. Need to restart modem or router.

[marto74]

Can someone help me figure out what I'm I doing wrong.

Set router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r

and I see this

Code:

ntpd: resolved peer 3.openwrt.pool.ntp.org to 89.212.75.6
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock

teamviewer inside your network please

[loshia]

Can someone help me figure out what I'm I doing wrong.

Set router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r

and I see this

Code:

ntpd: resolved peer 3.openwrt.pool.ntp.org to 89.212.75.6
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock

teamviewer inside your network please

and ?
After that what you see. Some patience is needed Triple check pool url, worker and pass.
And tell us what cgminer tells you

[Lucko]

For some reason it just start working... I think it was dropbox upload that slow down my network too much...

Thanks Zich for pointing me in the right direction and marto74 for offering to help...

[loshia]

For some reason it just start working... I think it was dropbox upload that slow down my network too much...

Thanks Zich for pointing me in the right direction and marto74 for offering to help...

How is the board working?

[Lucko]

It looks like 6 is too much for one router...

Code:

cgminer version 4.0.0 - Started: [2014-03-12 16:30:02]
------------------------------------------------------------------------------------------
 (5s):1.631T (avg):1.576Th/s | A:937986  R:3484  HW:6  WU:26.4/m
 ST: 1  SS: 3  NB: 4  LW: 953634  GF: 0  RF: 1
 Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
 Block: e1864380...  Diff:3.82G  Started: [17:12:31]  Best share: 541K
------------------------------------------------------------------------------------------
 [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
 000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU:  4.7/m
 001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R:  78/0.05% HW:2/0.98% WU:  4.7/m
 002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU:  4.5/m
 003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R:  68/0.05% HW:0/0.00% WU:  4.0/m
 004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU:  4.5/m
 005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R:  50/0.03% HW:0/0.00% WU:  4.0/m
------------------------------------------------------------------------------------------
 [2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
 [2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
 [2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
 [2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
 [2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
 [2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
 [2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
 [2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
 [2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
 [2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
 [2014-03-12 17:12:31] Stratum from pool 0 detected new block
 [2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
 [2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
 [2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
 [2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
 [2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
 [2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
 [2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0

And I still need to plug in more... But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough...

[marto74]

410 will be enough up to 240 clock setting

[iFA88]

Can u please write me a "top" result with these miners?!

It looks like 6 is too much for one router...

Code:

cgminer version 4.0.0 - Started: [2014-03-12 16:30:02]
------------------------------------------------------------------------------------------
 (5s):1.631T (avg):1.576Th/s | A:937986  R:3484  HW:6  WU:26.4/m
 ST: 1  SS: 3  NB: 4  LW: 953634  GF: 0  RF: 1
 Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
 Block: e1864380...  Diff:3.82G  Started: [17:12:31]  Best share: 541K
------------------------------------------------------------------------------------------
 [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
 000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU:  4.7/m
 001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R:  78/0.05% HW:2/0.98% WU:  4.7/m
 002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU:  4.5/m
 003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R:  68/0.05% HW:0/0.00% WU:  4.0/m
 004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU:  4.5/m
 005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R:  50/0.03% HW:0/0.00% WU:  4.0/m
------------------------------------------------------------------------------------------
 [2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
 [2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
 [2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
 [2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
 [2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
 [2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
 [2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
 [2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
 [2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
 [2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
 [2014-03-12 17:12:31] Stratum from pool 0 detected new block
 [2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
 [2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
 [2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
 [2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
 [2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
 [2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
 [2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0

And I still need to plug in more... But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough...

[loshia]

It looks like 6 is too much for one router...

Code:

cgminer version 4.0.0 - Started: [2014-03-12 16:30:02]
------------------------------------------------------------------------------------------
 (5s):1.631T (avg):1.576Th/s | A:937986  R:3484  HW:6  WU:26.4/m
 ST: 1  SS: 3  NB: 4  LW: 953634  GF: 0  RF: 1
 Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
 Block: e1864380...  Diff:3.82G  Started: [17:12:31]  Best share: 541K
------------------------------------------------------------------------------------------
 [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
 000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU:  4.7/m
 001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R:  78/0.05% HW:2/0.98% WU:  4.7/m
 002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU:  4.5/m
 003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R:  68/0.05% HW:0/0.00% WU:  4.0/m
 004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU:  4.5/m
 005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R:  50/0.03% HW:0/0.00% WU:  4.0/m
------------------------------------------------------------------------------------------
 [2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
 [2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
 [2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
 [2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
 [2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
 [2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
 [2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
 [2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
 [2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
 [2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
 [2014-03-12 17:12:31] Stratum from pool 0 detected new block
 [2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
 [2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
 [2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
 [2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
 [2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
 [2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
 [2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0

And I still need to plug in more... But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough...

Now I know why it took so long for cgminer to start
Watch for cgminer update if you are gona plug more to a single tplink host

[Lucko]

Can u please write me a "top" result with these miners?!

By top you mean what? Best share? Total hashrate? Best hashrate?

[Zich]

Can u please write me a "top" result with these miners?!

By top you mean what? Best share? Total hashrate? Best hashrate?

iFA88 mean top command. He want to see your CPU & memory usage 

[Lucko]

Is that it?

Code:

Mem: 16400K used, 12956K free, 0K shrd, 1724K buff, 4620K cached
CPU:  34% usr  26% sys   4% nic  33% idle   0% io   0% irq   0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
  760   752 root     S    75220 256%  65% /usr/bin/cgminer --hexmineru-frequenc