So....5MH firmware anyone???
Where's that at? I'm doing good to get 3.3MH from a group of 10 right now...
It doesn't exist. That's what I'm becoming afraid of...3MH vs 5MH is a huge difference on my ROI... LA3M can work at 3.7-3.8mhs now. and for 5mhs, needs very powerful controller and its not stable. |
|
|
|
Just got my la3m setup, I have the controller with the v2 firmware. Will post results.
Patiently waiting for some news or a .bin.  +1 Again, why isnt jack communicating to the community? - Its beyond me How did you get the new firmware for your LA3M? i will give u new controller with new firmware How about the rest of us who already contributed to your companys bank account?? payment did by bank transfer has been shipped out. only few btc payment is not shipped. |
|
|
|
Just got my la3m setup, I have the controller with the v2 firmware. Will post results.
Patiently waiting for some news or a .bin. +1 Again, why isnt jack communicating to the community? - Its beyond me How did you get the new firmware for your LA3M? i will give u new controller with new firmware |
|
|
|
Hello fellow miners, I came across altcoin guy, owner of http://www.lightningasic.com/ or claiming to be an owner, the info is in skype profile; somehow I mistaken him for gridseed guys; Basically, he offered 12BTC for 200 pcs of gridseed. Here is skype chat log: [3/4/14 10:10:53 AM] altcoin: Hi
[3/4/14 10:23:58 AM] altcoin: what do you want?
[3/4/14 12:32:54 PM] volosator: oh I was wondering back then if I can buy 200 pcs of gs 5 chip
[3/4/14 12:32:57 PM] volosator: or bare chips
[3/4/14 12:48:47 PM] altcoin: Yes
[3/4/14 12:48:50 PM] altcoin: Of course
[3/4/14 3:51:07 PM] volosator: what is the price?
[3/4/14 4:01:00 PM] altcoin: 12 btc now
[3/4/14 4:01:16 PM] volosator: I thought you don't accept payments in BTC
[3/4/14 4:01:34 PM] altcoin: Accept
[3/4/14 4:02:14 PM] volosator: wait
[3/4/14 4:02:18 PM] volosator: is it the same thing?
[3/4/14 4:02:31 PM] volosator: that cpu cooler looking thing?
[3/4/14 4:02:39 PM] volosator: 12 BTC for a batch of 200 -> $40 a piece
[3/4/14 4:02:53 PM] volosator: sounds low to me, I bough 13 for myself, paid $250 per piece
[3/4/14 4:04:23 PM] altcoin: at the one-time purchase is wholesale discount
[3/4/14 4:04:42 PM] altcoin: given that there are not many
[3/4/14 4:07:49 PM] altcoin: you book?
[3/4/14 4:10:14 PM] volosator: not via skype
[3/4/14 4:10:50 PM] altcoin: ok
[3/4/14 4:12:18 PM] altcoin sent a file to this group:
Instruction_orders_book_asic_miner_china.scr
[3/4/14 4:12:44 PM] altcoin: fill in the order form as indicated in the instructions
[3/4/14 5:00:17 PM] volosator: scr?
[3/4/14 5:00:20 PM] volosator: wtf is that?
[3/4/14 5:02:49 PM] altcoin: oh sorry you do not send
[3/4/14 5:03:59 PM] altcoin: send 12 btc to my email address here and write your e-mail data to send parcels
[3/4/14 5:04:21 PM] altcoin: btc adress: 1FFt2E4jHXpVjprp93tQ3BehnyxucGjG5e
[3/4/14 5:04:53 PM] volosator: dude
[3/4/14 5:05:02 PM] volosator: first of all - I don't run windows
[3/4/14 5:05:13 PM] volosator: second - there is a virus in the file you've sent me
[3/4/14 5:05:18 PM] volosator: it will run on windows only
[3/4/14 5:05:47 PM] volosator: this goes up to bitcointalk.org
[3/4/14 5:05:47 PM] altcoin: it's not you I'm confused and there is not really a virus
[3/4/14 5:06:23 PM] volosator: sorry dude
[3/4/14 5:06:36 PM] volosator: i don't fall for this. it's actually very well done
[3/4/14 5:07:54 PM] volosator: охренеть короче
[3/4/14 5:08:12 PM] altcoin: ?
[3/4/14 5:08:30 PM] altcoin: On 3/4/14, at 5:00 PM, Mike wrote:
> охренеть короче
what?
[3/4/14 5:08:51 PM] volosator: oh wrong window
[3/4/14 5:09:20 PM] altcoin: well this is the same, and you do not believe me
[3/4/14 5:09:20 PM] altcoin: lol
[3/4/14 5:09:59 PM] volosator: yep
[3/4/14 5:10:04 PM] volosator: after sending me a virus =)
[3/4/14 5:10:25 PM] volosator: dude srsly - I'm a sysadmin with a more than 10 years of exp
[3/4/14 5:10:59 PM] altcoin: I have not sent you, and there is not a virus
[3/4/14 5:11:13 PM] volosator: upload the file to http://online.drweb.com/
[3/4/14 5:12:04 PM] altcoin: hmm, why then my antivirus does not swear?
[3/4/14 5:12:11 PM] volosator: because you don't have any
[3/4/14 5:12:20 PM] altcoin: or u all rigged
[3/4/14 5:12:20 PM] altcoin: ?
[3/4/14 5:16:00 PM] volosator: Instruction_orders_book_asic_miner_china.scr: PE32 executable for MS Windows (GUI) Intel 80386 32-bit To wrap this up: beware this guy. He claims being from China, somehow he has my time zone, I'm in MA, USA. Now you know. P.S According to this: this he had some folks scammed already. EDIT: at the time of post he was offline. EDIT2: corrected URL at the beginning hi, Volosator, you are not on my skype contact list. be careful. you need to add my skype id: altcoin. not just by the show of the nick name. if you chatted with me. it should show: Jack, LA1THS ready,bitcoin miner.LA12MS 4U Coming. not altcoin. you can pm me here for double confirm. |
|
|
|
What miner software is the 1TH unit using,hope its similar to Ants web based design...soooo simple  No compiling,no "proxy" crap PLEASE!!!  its cgminer. and pls check attached config photo  |
|
|
|
BE CAREFUL GUYS!
I place order 3 weeks ago. Jack confirmed payment and shipping details. Since then no answer to my mails or on skype
Either he has huge mess or this is perfect SCAM - deliver some orders at beginning and later run away....
pls give me ur payment info here, i will reply u the dhl tracking no. there is only few package not send out on time now.because of payment not trackable, or no tel no, no posct code . thanks. |
|
|
|
I ordered 2 x LA6M from asiabtc!
I paid on Feb 12, with BTC (Jack confirmed payment received)
I got many "will ship soon" and also "will ship today" but
** still no unit, no tracking, last few days no return of emails ***
Please ship or refund. I'm already waiting for way too long...
dear samoshi, the package has been shipped out on feb27. pls check the dhl 1889723953. we should do it better to reply all emails and give tracking no at once. and leak of staff. very sorry for bring your this trouble. from this week, everything will be more smoothly . the payment, orders will be trackable.new website will be online. web store will work. thanks. Jack. |
|
|
|
|
thanks a lot for your setup guide.
great works.
|
|
|
|
Ok, I will post this here, since I think people could benefit from it. I'll have to give most of the credits to Girhes, since he told me about the failsafe mode of openWRT, and assisted me while trying to gain access (he did not have a controller himself yet). Please note that this is at YOUR OWN RISK, you could brick your device when you have root access to the controller. Please do NOT install any programs when you have root access, unless you really know what you are doing. There is almost no room left on the device, so installing a program could brick your device. 1 - Start the controller in failsafe mode: There are different HW versions of the TL-WR703N - on version 1.6 you have to power on the controller, wait until the led starts flashing twice a second (it takes about 4 seconds to get there), then push the reset button immediately. When the led starts to flash much faster your device is in failsafe mode. All other HW versions: power on the controller, wait 10-12 seconds until the led starts flashing, then immediately push the reset button for 1-2 seconds. Again, if the led will start blinking rapidly you are in failsafe mode. The versioin of your device is stated on the back of the device, underneath the barcode. 2 - Telnet into the device: On windows go to start, type 'cmd' in the search bar, and start 'cmd.exe'. In the command window you get afterwards, type 'telnet 192.168.1.1'. Make sure you use the correct IP, my device used 192.168.1.1 in failsafe mode. There is no user/pass required in failsafe mode. 3 - Switch to the live partition: Type 'mount_root' Warning! You are in the live partition now, with root permissions. You could seriously fuck thing up now!4 - Change the root password: Type 'passwd', and enter the password you would like (twice). 5 - Enable SSH: Type 'vim /etc/config/dropbear', this will open the SSH config file in the vim text editor. You need to change "option enable" to "on". You can start editing the file by hitting the 'i' key. You can now insert/delete characters. After you are finished editing hit the 'esc' key to stop editing. Now hit the ':' key, and type 'wq'. This will write the file, and quit the editor. If you made mistakes while editing, and just want to quit (without writing the file), type 'q' instead of 'wq'. 6 - Reboot the device: Just unplug the usb power, and plug it in again. 7 - Have fun! You can now SSH into the device while it is running in normal mode. (user: root, password whatever you entered in step 4). Just be carefull not to mess things up. If you are not at least a little familiar with linux, please be very carefull. well done.someday, i will public all source code. thanks a lot. |
|
|
|
Luke are you considering adding support for the gridseed 5 chip miner?
It is selling like hotcakes but has rather poor software support. bfgminer would be magic...
+1 very interested in this. Support for the single-chip thumbs is completed and submitted to Luke as a pull-request for 4.0: https://github.com/nwoolls/bfgminer/tree/feature/dualminer-supportSupport for the 5-chip miners is under way as well. That's great news! super good news !!! hi, nwools, thats great news. thanks a lot for ur great works.if need any support, just let me know. Jack. |
|
|
|
I'm thinking, if Gridseed sells these units as well, I wonder what kind of firmware they are using thats different Jack's... I wonder if Gridseeds firmware is more stable and hashes faster?
they use this one ... http://www.wiibox.net/down/v2.0.2.zip ... you can try the wiibox. i have 20pcs keep in hand. |
|
|
|
I hope my LA6M is shipped too, Angela says, it would be go out at 21th Feb, but I have no package and no tracking number.
we send two pcs la3m for 1 pcs la6m. |
|
|
|
last night, china time 7:00PM. shipped out one full dhl vehicle, all is LA3M.   all order , payment by paypal or bank transfer has been shipped out, except no clear info for receiptor. need name, tel no, post, addess. if no tel no,no post code, dhl rejects to accept it. btc payment, shipped out all order payed till feb 12. Feb25 shipped out all package payed by btc. except no clear info for receiptor. need name, tel no, post, addess. if no tel no,no post code, dhl rejects to accept it. if you didnt send full info, pls do as below: !!!Very Important!!!otherwise don't know who payed!!! when you payed out, please send me email: la.paymenttrack@gmail.com for payment details for tracking, model no+quantity;receipt-or name. tel no. post code, address ,company name(if have).if you need to put lower value on invoice, please write out what value it is.we will put original price on invoice if not declared out. thanks. jack. |
|
|
|
12M for 6650 sounds very interesting if this is basically 4 x LA3M. Or, is this a LA6M overclocked to 12M in a box? I am guessing it's the latter. Anyone know more about what's in the 12M box?
Completely different product. 1 THS sha256 and 12 MHS scrypt. You can see pictures of the unit in the first post of this thread and overhere. He doesn't say anything about scrypt mining in that thread? Are you sure this is a combined miner as well? there is two products line: 1, scrypt+sha256 combo: LA5U, LA3M, LA6M. 2, sha256 only bitcoin miner: LA220G, LA1THS. thanks. |
|
|
|
Jack, I paid $2,832.50 for miners via paypal so why did you stop responding to email and pm for status check? You're active online... Please cancel and refund my payment ( la.paymenttrack@gmail.com does not respond either). when did you pay out via paypal? the ETA is Date of payment arrived+ 7days. i have more than 1000pcs usb cell in ware house. just Waite for verify the payment, arrange dhl premium shipment. |
|
|
|
I HAVE SPOKEN TO ASIABTC , HE WILL NOT SEND ANY FREE SAMPLES, SO STOP BEGGING !!
this model is too expensive. i cannot provide free one. sorry. |
|
|
|
Agree, getting slammed with orders is a logistics nightmare.
I don't think so. 10,000 orders is a logistical nightmare for one person. I can't imagine him getting more than 100 orders. That is nice problem to have for an individual, but easily doable. Being logical/logistical vs greedy isn't that hard. Take a maximum number of orders per day and ramp up production and order taking as you build the systems. Instead of piling on the crap. Whatever. It still looks like those who pay with paypal/banktransfer are getting priority over those who pay in B I'm going with this guy is stacking a collection of BTC to run away with. I'll give it until the 27th to leave negative trust but I'll say it for fun here. asiabtc is an IDIOT or a SCAMMER either of which will cost you money. hi, i accept your fefund order. tomorrow, i will ask my staff to deal your order first. if not shipped out, refund to you at once. give me your btc address here. |
|
|
|
|
Show Posts
