Latest posts of: budiselich

Show Posts
Pages: [1]

on: December 09, 2017, 01:27:01 PM

Hi guys, anyone tried nanopool electroneum pool? Any opinions?

on: November 28, 2017, 08:45:16 AM

Hi, i am having trouble with power consumption with SimpleMining OS. I have 5x rx580 8g rig, and my rig consumption was 800W, but after I rebooted my rig, my power consumption rised to 1200W! No matter what I set in simplemining dashboad (clocks, voltage, powerstage) is not helping. What should I do? I am using dagfix img

on: July 22, 2017, 05:21:53 AM

Hi, yesterday I sent DASH coins to my BitPanda wallet. Problem is that coins are not showing up in wallet. Here you can find that my wallet recieved coins https://chainz.cryptoid.info/dash/address.dws?XfthbKi8269hNdjp4v4HajCnjZ6QH8zD36.htm TXID: 11d31f9d6de03515079086ef2be4cc99a94768285840229cda6ddc1e713b94e0 Help pls! Ticcket ID: 49202

on: June 24, 2017, 08:08:19 PM

Hi, i have problem with my 2x Sapphire RX580 Nitro+ 8GB Hynix rig. 1. I was perfectly dual mine for 1 month 60mh/s ETH + 1150 MH/s SIA, with latest drivers. Suddenly my rig goes green screen, sometimes blue screen. Downgraded drivers to 17.4.3 and 17.4.4, same problem. But sometimes when I run only eth mining, then works, but not always. And then I can dual mine also, but it is strange that first I need to run eth only mining then close miner and start again dual mine. This is not working always. 2. One more thing, my cards are same and each gives 30.3 mh/s, but sometimes hashrate of one card drops to 27 for few second and returns to 30.3, and then again after 30-60 sec. Second card is stable to 30.3. This started to happen when I put my second card in rig, without that second card first card was also stable to 30.3. Any help for this 2 problems? :/ Thanks!

on: June 05, 2017, 03:07:09 PM

Hi, how long I need to wait for unconfirmed Siacoins to become confirmed? Mining now for day and a half and balance is still unconfirmed. Thanks!

on: June 05, 2017, 02:19:47 PM

Hi, can I mix RX580 and RX480 on one rig?

on: June 02, 2017, 11:09:13 AM

Hi, Bitpanda message when deposit BTC: "Minimum deposit is 0.00100 BTC. Deposits below 0.05000 BTC count as mini-deposits and are subject to a fee charge of 0.00030 BTC." But you didn't write what is a fee when deposit is more then 0.05 BTC.

on: May 27, 2017, 08:21:33 PM

Hello, If i want sell BTC to my Skrill account what is the exact fee % for Skrill? Can't find any info about fees. Thanks"

on: May 22, 2017, 01:05:18 PM

Quote from: hselek on May 22, 2017, 12:44:39 PM Another problem; After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same. Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen? PS: I only flashed the card that is identified as Polaris 10 Try this Polaris BIOS Editor https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b

on: May 22, 2017, 12:37:48 PM

Quote from: papi92 on May 22, 2017, 12:34:33 PM Guys, on my bios higher frequency is 2000. I haven't 2050 or 2100. Is there a way to add it or it isn't necessary? https://i.imgur.com/qnZLJIR.jpg Give us more details about your graphic card.

on: May 22, 2017, 12:26:38 PM

Quote from: hselek on May 22, 2017, 12:22:54 PM Quote from: error5404 on May 11, 2017, 06:53:07 PM RX580 Sapphire Nitro+ 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx Maybe not all cards can be undervolted -75mv OR maybe more then -75mv Strap copied to 2:1750, 2:2000, 2:2250: 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17 here is a blank, check you copy all without the blank (forum changes it?) ETH: 30.1 - 30.3 - 100% Stable, 0 Errors, about 2 weeks Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs. Other straps got me lower MH on memory overclock or blackscreens and artefacts When I do exactly this, I get "Invalid HEX String" from polaris bios editor.After that it crashes but saves the file (0 byte file). Is it the same with you guys too or is it just me ? First copy strap into notepad and delete white space, there is one white space in HEX string. Maybe that is a problem.

on: May 22, 2017, 11:13:21 AM

Quote from: Mattthev on May 22, 2017, 10:47:41 AM I'm not sure if 2200Mhz makes difference compare to 2100 for this performance timmings... I would prefer lower it'll be more stable and also less heat... When I lower memory clock from 2200MHz to 2100MHz I am getting 29.6 Mh/s, so difference is 1.4 Mh/s, and temeperature went from 65°C to 63°C

on: May 22, 2017, 09:24:40 AM

Quote from: error5404 on May 11, 2017, 06:53:07 PM RX580 Sapphire Nitro+ 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx Maybe not all cards can be undervolted -75mv OR maybe more then -75mv Strap copied to 2:1750, 2:2000, 2:2250: 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17 here is a blank, check you copy all without the blank (forum changes it?) ETH: 30.1 - 30.3 - 100% Stable, 0 Errors, about 2 weeks Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs. Other straps got me lower MH on memory overclock or blackscreens and artefacts Hi, thanks for info, this strap and frequencies also worked for me (RX580 Sapphire Nitro+ 8GB Hynix). I went little bit further and set Core Clock to 1204MHz and Memory Clock at 2200MHz, voltage -74mV. Now getting 31.0 - 31.1

Pages: [1]