PuppyLover101
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 26, 2017, 02:11:51 AM |
|
How do I add parameters to claymore? If i know how then I will switch my entire mining farm to SMOS.. This is the only reason why i havent switched yet. For example, how can I add "-mvddc 900 -cvddc 900 -cclock 1200 -mclock 2150"
|
|
|
|
xPETEx
Newbie
Offline
Activity: 55
Merit: 0
|
|
November 26, 2017, 02:41:24 AM |
|
How do I add parameters to claymore? If i know how then I will switch my entire mining farm to SMOS.. This is the only reason why i havent switched yet. For example, how can I add "-mvddc 900 -cvddc 900 -cclock 1200 -mclock 2150"
uh, look at the post immediately above yours for an example. just add those extra things you want. on the simplemining.net website you click on the left side to "rig groups", then add group, then select Claymore or whatever you want, and put all the parameters in there. Go back to the main "rig list" page on the website, then click the tick box next to your miner, click "assign group" and chose the group that you just created.
|
|
|
|
logicassets
Newbie
Offline
Activity: 49
Merit: 0
|
|
November 26, 2017, 04:11:09 AM |
|
For the rig that you want to control, go to the Rig Group that the rig is assigned and click the setting symbol (Miner programs) and change the strings for Claymore. Then Save, and you're done. Easy. How do I add parameters to claymore? If i know how then I will switch my entire mining farm to SMOS.. This is the only reason why i havent switched yet. For example, how can I add "-mvddc 900 -cvddc 900 -cclock 1200 -mclock 2150"
|
|
|
|
Longhorn901
Member
Offline
Activity: 72
Merit: 17
|
|
November 26, 2017, 05:01:44 AM |
|
Hi guy's, Anyone know if the 1070ti is fully supported? I just bought one to try out and am having an issue. It runs but the Over Clocking settings have no effect. Also it seems to not recognize which card it is, see below. The best and only speed I get is around 26.8 Mh/s
ERROR: Error querying connected displays on GPU 0 (Missing Extension). ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'. Available core offset for GPU 0 is in Applying CoreOffset: Available power limit for GPU 0 is 90.00 W, 217.00 W Applying PowerLimit: 217 watt for GPU 0 ============ Starting Miner =============== Binary file (standard input) matches
ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444 ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21 ETH: GPU0 26.824 Mh/s GPU0 t=60C fan=35%
|
|
|
|
Felis777
Newbie
Offline
Activity: 9
Merit: 0
|
|
November 26, 2017, 02:06:14 PM |
|
I have 11 rx580 rig, simplemining shows in core/mem column only 10 cards, besides that, overclock value of 10th card is switched with 2nd card. Overclocking memory MHz set: 2070,2025,2025,2025,2025,2050,2100,2040,2000,1975,2025 Core/Mem shows: 2070 1975 2025 2025 2025 2025 2050 2100 2040 2000 C//fan shows all 11 cards. Rig works normally, but is overcklocking applied correctly?
sorry for bad english
|
|
|
|
Nekor
Newbie
Offline
Activity: 28
Merit: 0
|
|
November 26, 2017, 09:31:10 PM |
|
Is there a distro for mixed systems? We have a couple (2) of rigs with NV and AMD cards in them.
|
|
|
|
gerst
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 27, 2017, 06:58:55 AM |
|
It´s OK, i think you deserve some revenue for your work and maintenance/cost of the platform @ tytanick. Has nobody got the losing wifi ability from router when mining? When i start mining via ethernet with my rig i cant connect any home device to wifi. I tried with ubuntu too and have the same problem . And any pool advice and configuration for stable dual mining ETH/DCR with 2x RX480? I would apretiate much some help . Are you using server PSU? I've got the same, when mining started and SPU fan go higher speed, loosing wifi signal
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
November 27, 2017, 09:32:11 AM |
|
Hi guy's, Anyone know if the 1070ti is fully supported? I just bought one to try out and am having an issue. It runs but the Over Clocking settings have no effect. Also it seems to not recognize which card it is, see below. The best and only speed I get is around 26.8 Mh/s
ERROR: Error querying connected displays on GPU 0 (Missing Extension). ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'. Available core offset for GPU 0 is in Applying CoreOffset: Available power limit for GPU 0 is 90.00 W, 217.00 W Applying PowerLimit: 217 watt for GPU 0 ============ Starting Miner =============== Binary file (standard input) matches
ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444 ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21 ETH: GPU0 26.824 Mh/s GPU0 t=60C fan=35%
8 x Zotac 1070ti running Equihash at NH, smOS -- running over a week now. 200core/750mem/120w PL
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Longhorn901
Member
Offline
Activity: 72
Merit: 17
|
|
November 27, 2017, 01:55:41 PM |
|
Hi guy's, Anyone know if the 1070ti is fully supported? I just bought one to try out and am having an issue. It runs but the Over Clocking settings have no effect. Also it seems to not recognize which card it is, see below. The best and only speed I get is around 26.8 Mh/s
ERROR: Error querying connected displays on GPU 0 (Missing Extension). ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'. Available core offset for GPU 0 is in Applying CoreOffset: Available power limit for GPU 0 is 90.00 W, 217.00 W Applying PowerLimit: 217 watt for GPU 0 ============ Starting Miner =============== Binary file (standard input) matches
ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444 ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21 ETH: GPU0 26.824 Mh/s GPU0 t=60C fan=35%
8 x Zotac 1070ti running Equihash at NH, smOS -- running over a week now. 200core/750mem/120w PL Hi citronick, Thanks for the reply! Will smos actually recognize your cards as 1070 ti when it loads them on start up ? I'm running the nvidia GTX 1070 ti and smos will not recognize the card type.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
November 27, 2017, 02:13:40 PM |
|
Hi guy's, Anyone know if the 1070ti is fully supported? I just bought one to try out and am having an issue. It runs but the Over Clocking settings have no effect. Also it seems to not recognize which card it is, see below. The best and only speed I get is around 26.8 Mh/s
ERROR: Error querying connected displays on GPU 0 (Missing Extension). ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'. Available core offset for GPU 0 is in Applying CoreOffset: Available power limit for GPU 0 is 90.00 W, 217.00 W Applying PowerLimit: 217 watt for GPU 0 ============ Starting Miner =============== Binary file (standard input) matches
ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444 ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21 ETH: GPU0 26.824 Mh/s GPU0 t=60C fan=35%
8 x Zotac 1070ti running Equihash at NH, smOS -- running over a week now. 200core/750mem/120w PL ... Hi citronick, Thanks for the reply! Will smos actually recognize your cards as 1070 ti when it loads them on start up ? I'm running the nvidia GTX 1070 ti and smos will not recognize the card type. I don't think it specifically say 1070ti during smOS bootup, but the core/mem/PL settings in Windows/dstm vs smOS/ewbf is not that far away though - if next smOS version supports dstm miner, you should get 10-15% bump up ~ 500-510 sol/s like dstm. As long as it works, and achieving the sols this card can do - we should put it to work right away and ROI the investment as fast as possible. NVIDIA cards are less dramatic vs AMD cards with drivers support especially in Linux. I have smOS on P106, 1051ti, 1070, 1070ti and 1080ti -- on smOS without any issues. Next versions of smOS should get the GPU naming correctly.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
bigminervn
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 27, 2017, 02:19:16 PM |
|
I want to develop a network in my country please tell me how to contact admin
|
|
|
|
cccomputing
Jr. Member
Offline
Activity: 34
Merit: 2
|
|
November 27, 2017, 08:40:41 PM |
|
Can Simplemining (and Claymore / ewbf) handle 16 GPUs ? Im thinking about the ASUS B250 Mainboard with 19 slots and using it with 16 of GTX1070
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
November 27, 2017, 08:43:22 PM |
|
Can Simplemining (and Claymore / ewbf) handle 16 GPUs ? Im thinking about the ASUS B250 Mainboard with 19 slots and using it with 16 of GTX1070
I think Tytanick mentioned max 15 GPUs
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
slajfo
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 27, 2017, 10:03:53 PM |
|
Im waiting for VEGA support for XMR mining on SMOS, some news or ETA about this?
|
|
|
|
gilmardal
Newbie
Offline
Activity: 22
Merit: 0
|
|
November 27, 2017, 10:56:31 PM |
|
Hi guy's, Anyone know if the 1070ti is fully supported? I just bought one to try out and am having an issue. It runs but the Over Clocking settings have no effect. Also it seems to not recognize which card it is, see below. The best and only speed I get is around 26.8 Mh/s
ERROR: Error querying connected displays on GPU 0 (Missing Extension). ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'. Available core offset for GPU 0 is in Applying CoreOffset: Available power limit for GPU 0 is 90.00 W, 217.00 W Applying PowerLimit: 217 watt for GPU 0 ============ Starting Miner =============== Binary file (standard input) matches
ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444 ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21 ETH: GPU0 26.824 Mh/s GPU0 t=60C fan=35%
8 x Zotac 1070ti running Equihash at NH, smOS -- running over a week now. 200core/750mem/120w PL https://i.imgur.com/9Dj9CV3.jpghttps://i.imgur.com/SvYnt1O.pngI'm curious about this riser, where did you buy this? Thanks
|
|
|
|
RedRockMining
Member
Offline
Activity: 127
Merit: 10
|
|
November 27, 2017, 11:05:48 PM |
|
Q: How to install AMD drivers? Extracted file, now getting "Permission Denied" when trying to run the script... I'm assuming it's something simple. Not regular a Linux user....
|
|
|
|
YarMiner
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 28, 2017, 04:47:05 AM |
|
Hi! I need help. Yesterday all my rigs just turned off. When I'm trying to reset, they starting to mine but stopping in few minutes. I checked twice Internet and electricity - everything is Ok. Whats wrong? Thanks!
|
|
|
|
budiselich
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 28, 2017, 08:45:16 AM |
|
Hi, i am having trouble with power consumption with SimpleMining OS. I have 5x rx580 8g rig, and my rig consumption was 800W, but after I rebooted my rig, my power consumption rised to 1200W! No matter what I set in simplemining dashboad (clocks, voltage, powerstage) is not helping. What should I do? I am using dagfix img
|
|
|
|
GuiNaaa
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 28, 2017, 11:13:51 AM |
|
Hi everyone, I already have one 13 GPU Rig working with SMOS smoothly so far.
Now I setting up another rig with the AsRock H110 Pro BTC+ motherboard, but I some kind of issue with the Lan Network Connection, and come to here to see if anyone did get any trouble like this and if it was solved.
At the start up of the system, the orange light of the ethernet connector on the mobo turns on, for some seconds, and then, it turn off (this process repeats 2 times again).
The SMOS starts as usual, and then, it stops with one message that is relationed with some network issue, this is the message that appears on the screen:
"A start job is running for raise network interfaces (5 mins 1 sec)."
When the count donw reachs the time of 5 min and 1 sec, the SMOS startup finish, but the SMOS can't minerate, and keep returning this another message over and over again:
"no screen to be attached matching miner"
Please, anyone can help-me to get this fixed??
|
|
|
|
QuirkSilver
Member
Offline
Activity: 80
Merit: 13
|
|
November 28, 2017, 11:15:06 AM |
|
RC2 = Release Candidate 2 = New Version
Yes, "-g 2"
Ok, I installed RC2 and setup a new work group using SGMiner 5.5.5 here is my script... --no-submit-stale --kernel cryptonight -o stratum+tcp://etn.easyhash.io:3632 -u etnkB5oi7TadHKKrKf5d89M9XLAekyHXNG84Mi2j4Gi7BvohmSrx3CKKjAw2fN1WGXGGgUWWV3HfpLR U1BUAqwW219jmQJQJcT -p x --rawintensity 512 -w 4 -g 2 --text-only I can't tell but I don't think anything changed. After the cards overclock it always says.... [01:09:49] Initialising kernel cryptonight.cl with nfactor 10, n 1024 [01:09:49] Initialising kernel cryptonight.cl with nfactor 10, n 1024 [01:09:49] Initialising kernel cryptonight.cl with nfactor 10, n 1024 [01:09:50] Initialising kernel cryptonight.cl with nfactor 10, n 1024 Then it starts mining away but at the same hashrates... It's still mining with one thread I think? Is there an easy way to tell when I have it right? I haven't noticed a difference so I think something isn't working right for me. Also, I see the prompt on the rig now to apply the DAG fix, (Im using RX 580s) I should not do that right? This beta already has that but its just prompting because it doesn't recognize the beta build? Yes, you do not need the DAG fix. Try to increase rawintensity, 4GB - 864 or 972 8GB - 1132 And use -w 8 If SM is similar to windows, then use 896 in SGminer (or Gatelessgate the older GUI/new sharp GG), both 570/580 FLY on this. I have 3x Aorus 580s i bought recently, they have Hynix memory which is insane imo "not sure why people curse it". 2 of the 3 go up to 2175 mem with no errors (i downclock memory because i don't want to run core at like 1300+) i do 930+ easily with 1150/2100 the more core, the more hash even. Even for the crappy strix 570 Elpida that i have (never clocks higher than 1860 mem) i get~850 h/s with the same 896 raw intensity, 2 workers, 8 work size. I'm puzzled though about 390/290x in general. can't calculate anything meaningful shader based for them.
|
|
|
|
|