Show Posts
|
Pages: [1] 2 »
|
So, any news for KBminer ??
|
|
|
Please, if it is possible, add "KBminer" for GRIN. It support c31 and mining even on 4gb cards.
|
|
|
Regarding GrinGoldMIner, I am getting error: InvalidWorkItemSize. Cards are rx580 with 8gb, anyone experience the same, is there any fix for this ??
Can you help me with a config command line in SMOS to mine with gringoldminer? Thanks in advance. They already write in simplemining exact procedure, what you need to input, it is not a huge problem: "Default config: server port tls user pass" I am using command "notls", because for some reason tls not working for me on f2pool.
|
|
|
Regarding GrinGoldMIner, I am getting error: InvalidWorkItemSize. Cards are rx580 with 8gb, anyone experience the same, is there any fix for this ??
|
|
|
New miner version: - lolminer-v0.7-alpha2 (Reduced VRAM consumption from 3.9G to 3.4G. This should improve stability on 4G cards. Increased performance by about 15% on AMD)
Thank you for this. Also please consider to add GrinGoldMiner 2.8, it is the best GRIN miner for AMD at the moment.
|
|
|
Please add new version of lolminer, v0.7 alpha2.
Thx
|
|
|
Regarding exchange, if people just read a little bit couple of posts they will realize that dev last month talking about solution to list Veronite on TradeOgre but there is, still, not the right response from exchange, even devs fix the code(what TradeOgre demanded) according to discord channel.
|
|
|
One question, I have one wallet with multiple addresses inside, I have two parking address in that wallet.
When parking on one address is over, is it safe to sent coins to another address without affect park on second address. Maybe the right question will be, can I sent coins from one address and choose, while sending, from which one I want to sent, off course without affecting the park for other address in the same wallet ??
I ask this because wallet always show me whole amount of coins in the wallet, from all addresses.
To be 100% sure you must use input control Setings--Options--Wallet--Enable coin control Than in sending menu tick box at Custom Change adress and put there your registred in MNXbank adress, Than press Inputs and choose adres from witch you want to send coins. And tick box subtract fee from amount to avoid loosing your parking because of network fee. Thank you.
|
|
|
One question, I have one wallet with multiple addresses inside, I have two parking address in that wallet.
When parking on one address is over, is it safe to sent coins to another address without affect park on second address. Maybe the right question will be, can I sent coins from one address and choose, while sending, from which one I want to sent, off course without affecting the park for other address in the same wallet ??
I ask this because wallet always show me whole amount of coins in the wallet, from all addresses.
|
|
|
It is good to see that you put a lot of efforts in this project, it is good to have a good miner for this algo under windows, but not so much for MNX, there is not a lot of sense because Optiminer is way better then this(I understand it is still in early development), but please consider that MNX will change algo later this year.
|
|
|
I just made an interesting observation regarding headless displays and maybe also applies for ZenoDiac:
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
"There is no platform 1 on this system" error ... Switched the Nvidia rig back to bminer/equihash for now. 2 AMD rigs - one with rx's and one with r9 290's seem to be doing fine. Not 100% stable, but only one instance crashes every now and again - randomly and without any sort of set time in between the crashes. Just one question, are you able to mine minex with bminer ?
|
|
|
Hello, developer. rx580 gives the optimizer 10ksol on Linux, and on your 6.5, maybe it's all about the intensity ?? Just to confirm the issue with RX cards, in my case RX570 gives me 5.8 while on linux+optiminer there is around 9ksol. To bad.
|
|
|
Hi guys !
Can someone give instruction (step by step), how to start the latest version, 2.1.0, on ethOS. I try everything but without success, while version 2.0.0 working.
Thanks.
|
|
|
Thank you for your help, but are you sure this one will work ? have you tested it before ? i didn't flash it yet, but i used similar mod yesterday and didn't work, alot of people saying it's can't be modified, just want to make sure that u tried it before ?
thanks
I have not tried it however there is no reason it shouldn't work. If I had the card in front of me I would keep going even if that ment I had to start digging into hex. However I had to put together a separate machine running 16.11.5 to flash some of my samsung memory cards then when put back into a system running 16.9.2 they worked perfectly. Side note if none of them work your not out anything however if they work and you chose to send me a tip that would be cool. Woohoo, Who said Micron is sucks , Finally it's worked hashing at 30.3XX, after few edits in bios and Wattool, 0.25 Eth Sent https://etherscan.io/tx/0x273384d026f0200920ee8a7196382afde13b37d0cc749fc8cb092d0aecd319bdThanks . ********************* Hello, I do have a sapphire RX 480, with bios 113-1E353FU.O50 , also trying to find a bios that increase the hashing. Anyone around with this Bios modified and ready to flash? Also more than happy to reward someone with the right file. Please, let me know. Here is my modded bios for this cards, I have two rigs, working perfect. https://ufile.io/mero9Use clocks 1130/2080. Undervolt done under bios. ETH 0x883c98170c95608ca62dabd28052599de6087ab5
|
|
|
Still no any info from dev about novaexchange, vote is end so, again same question, what now, what we need to wait, do you know what is the procedure now, do you contact them ?!?
|
|
|
novaexchange vote 250 /250.
What now ?
|
|
|
It seams mining working only under linux at the moment.
|
|
|
There should be some pool for mining ? I guess.
|
|
|
Here is my code: 5F09C7EA49
I beleive in this coin since there is no one with DRM(as I know) in app. Also in-app purchases is the future of the coins like this.
|
|
|
|