[CLOSED]

Hello, per friedcat's post here: https://bitcointalk.org/index.php?topic=735728.0

09/12/204: - CLOSED

DO NOT GET SCAMMED I DO NOT PM PAYMENT ADDRESSES INDIVIDUALLY., read: https://bitcointalk.org/index.php?topic=735982.msg8370953#msg8370953
ADDRESS IS POSTED BELOW.

This is a domestic group buy for those of you who may want to order less than 10 units. (friedcat will accept orders of 10+ directly, contact user phasebird)

You will need to email me a label to canary.btc@gmail.com. 1 Tube requires 1 Large Priority flat rate box & 1 Medium Flat Rate priority Box.  2 Tubes need 3 Large Priority flat rate boxes.  When you email the label, please sign the tracking numbers and include signature of the signed message. example:
-----BEGIN BITCOIN SIGNED MESSAGE-----
123456789789123,789789979768464986
-----BEGIN SIGNATURE-----
1HZwkjkeaoZfTSaJxDw6aKkxp45agDiEzN
G1OFEq4sVxv3iB9cKpOPNqM/mCTz4QbTZxRorqkG5q9whkbSY2CqosIultDH/auOl+dSntJaVPgJPXqHwvxAUmA=
-----END BITCOIN SIGNED MESSAGE-----
  
Payment addy:  1DDZYpAgAQNsykvM499et8XpMfRJokFrFE

Spec:

Hashrate: 800-850GH/s per full set.
Power consumption: ~0.9 J/GH board-wise. Gets higher along with ambient temperature. At the wall power draw depends on PSU efficiency.
Size: 25cmx12cmx12cm per full set.
Weight: 11.5 pounds (5.2kg) per full set.  Figure 12.5 packaged in shipping box
The hashing units are driven by Ethernet controllers. Each Ethernet controller can run up to 32 units.

Price:

1.04 btc per unit
I have some spare Pis on hand.  anyone who wishes to add a Pi to their order, let me know.

(I recommend buying 1.04 btc for USD, current cost is about $534 $493 $591 for 1.04 btc)
Although I do not expect to, I may increase pricing if some unexpected costs creep in (like import fees, if any, for ex.) (but this will be transparent).

Warranty: as specified in manufacturer's post.

Refunds: no refunds given once payment is sent to ASICMiner

I assume an assembled unit will look like this:


More pics here: http://www.iasicminer.com/index.php/action-viewnews-itemid-28

Rockminer is producing T1-BOX, based on ASICMiner released specs (X24).  It doesn't look like X24 however.  It's repackaged to be quiet and cool.
Specs:
800Gh/s, 96 chips, 1000 Watts (due to chip density) 4 x 6 pin PCI-E
25cm x 25cm x 20cm, weight is 8KG  

price: $645 per unit or less (see below)

shipping date: August 11th

500 400 units are available for sale.  Payment via bitcoin or USD (wire transfer).

Minimum order 40 units. price $645 per unit.  
For orders of 100+ units, price is $615 per unit
For orders of 200+ units, price is $580 per unit - 200+ pricing no longer available

[1Ex5CHXBPGSw93LSpMUeZxwt71XYaANMzv]

OK folks, I have them in hand.  

cost is .10 0.15206813 per unit.  please send btc to 1Ex5CHXBPGSw93LSpMUeZxwt71XYaANMzv
I will not PM you any payment addresses.  Use only the address posted here.  (scammers/imposters will try to contact you)

email me a shipping label to canary.btc@gmail.com
The from and to addresses are both yours. Designate shipping from 60181 zip code.
also you must send btc from an address you can sign a message with.
when emailing me a pdf shipping label, in the body of the message include one of the input  addresses and sign your tracking number.  so that might look like this (example only):

1Ex5CHXBPGSw93LSpMUeZxwt71XYaANMzv
9361589178306211219122
IJ3gQyVz1vqg04bV2HjyPFCYzLiOlEFMfr3a9lveoOp+c9UwiF/CEdgxnM5QUtvf+AilrPHJ6jMDC39lBLjcLJU=

8 units fit into a small priority flat rate box

the first people who have first priority are those who posted here expressing interest.  I've PMed you.

list of printers that had been tested by the maker:
https://www.reddit.com/r/Bitcoin/comments/2xp6ss/mycelium_entropy_update_for_monday_march_2nd/

RockMiner will accept an order for R3 @ $500 USD or for R4 @ $510 USD.  Wire transfer, bank info will be provided.

Minimum order is 20 units, max order is 100 units.

This is designed for large buyers and/or mining operations who want to spend dollars instead of bitcoins for in stock items.

Shipping time is about 3 business days.  All units in stock and ready to ship.

Feel free to contact me with questions etc...



R4 info and pics: http://shop.rockminer.com/goods.php?id=43

[PAUSED.]

In stock and shipping.  Price .10 btc per unit.   PAUSED. Introduce someone to mining!  These miners are super quiet.
06/11/2014: Thanks Luke-Jr for adding bfgminer support!!! https://bitcointalk.org/?topic=626361

This week's promo (6/16-20/2014):  Remember the ASICMiner USB Block Erupters??? I was doing some cleaning and rearranging and found a small stash of them here .  so, every order or r-box gets the original ASICMiner USB miner for free. while supplies last.  I have various colors, will mix them so that you have a variety if ordering multiple r-boxes.

Payment address: 1GgWprtNnyDYK8kchieCtPkaFSb5ffdLcz Please PM me to place an order.
break even calcs: https://tradeblock.com/mining/a/19939d33a6 (DO YOUR OWN!!! analysis, making your own assumptions.  don't trust my analysis)
doggie's guide: https://bitcointalk.org/index.php?topic=639030.0

A bunch running together (hotplugable):

see post #2 regarding OCing.

Each miners comes with a barrel connector and a USB cord.  You can connect the barrel connector to a 12V 5A power source.  HP/Dell server PSUs are excellent for doing this.

You can buy a PSU on amazon for this: http://www.amazon.com/Replacement-adapter-charger-Benq-Monitors/dp/B003Z6ZR5O/
I have a limited number of available PSUs (same as amazon above, at cost), if you want me to include some with your order, just let me know.

I recommend these adapters as well (store is reliable and I can vouch for the proprietor):



Shipping:

You can email me a shipping label (canary.btc@gmail.com) or you can pay me in btc to create one for you.
1 miner fits Region A Priority box. or flat rate PADDED envelope.  please note the emphasis on padded.
2 miners fit into a Medium Priority box.
4 miners fit into a region B box.
6 miners fit into a Large Priority box.

If you want me to handle shipping label, I'll charge btc, using Coinbase conversion.  I highly recommend using your USD and creating a label on usps.com
All you need to do is create a shipping label on www.usps.com and use YOUR address in both, the from and to fields. However, you specify shipping from a different zipcode, namely 60181
that's it!

Specs:
-Effective Hash Rate 32~37GH/S
-AM ASIC 4* AM Gen3. TSMC 40nm
-Mining Software CGMiner
-Machine Size 90mm(L)*90mm(W)*70 mm(H)
-Cooling Air Cooling system
-Power Supply 12V,5A adapter
-Power Interface DC2.5
-Nominal Power Consumption 40W~50W
-Ambient Operating Temperature 10°~35°C (50°~95°F)

4.2+ bfgminer release has native support without the need for the zidiag tool step.

there's also a branch of cgminer released by RockMiner that works with this hardware:
https://github.com/rockminerinc/cgminer-for-R-BOX
Rasp. Pi image: http://pan.baidu.com/s/1bnjFYX5

I found this approach to be most efficient on windows:
1. download current cgminer from: http://ck.kolivas.org/apps/cgminer/ unzip into a separate folder somewhere.
2. next, unzip and move the contents of the cgminer-win0.3.1.zip (from rockminer) into the folder from step 1.  This will move and replace up to 17 files and will overwrite the standard cgminer distribution.  Now you have a cgminer version that will work with r-box.
3. run cgminer and hash.

[PAUSED]

PAUSED.
Each Antminer U1 USB device is .053 btc  Bitmain AntMiner U1 Tips & Tricks

bfgminer support has been added and is available with version 3.10.0 List of hubs that should work: https://bitcointalk.org/index.php?topic=253749.0

PROMO: order 50 U1s and get a free 49 port hub.  While supplies last.  this is not for cumulative orders.  to get this promo you need to order 50 at a time.  50 U1s and a hub fit into a medium box

Payment address: 1Kt9enkaUCpqqFTok1wbFv6hTgWpg29kV6


AntMiner-U1 user guide: https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner-U1%20user%20guide.pdf
AntMiner AntGen1 cgminer for U1: https://github.com/AntMiner/AntGen1/tree/master/cgminer
Chip datasheet for the BM1380: https://github.com/AntMiner/AntGen1/blob/master/datasheet/BM1380_Datasheet.pdf

You will need to email me a label per below info (please read the OP in it's entirety)

For shipping labels here are your choices with USPS:

If ordering a single unit, you can use First Class Mail label if you would prefer that method for cost savings over priority mail for a single U1.
Total weight is under 2 oz in a padded yellow envelope.

1-10   units: Priority Small Flat rate box
1-24   units: Padded Flat Rate Envelope (Priority or Express)
1-81   units: Priority Medium Flat rate box, or Flat Rate Express label
1-127 units: Priority Large Flat rate box.
1-55   units: Region A box (for better shipping rates)  each unit is 1.105 oz. so multiply by number of miners. example: for 55: 55*1.105 = 60.775 oz or 3 lbs and 13 ounces.

those who have fedex accounts or can email me a fedex label, you can do so.

When creating the labels via USPS/FedEx, it's up to you to choose the type of service: Priority/Express, Ground/Next Day etc...

Insurance is recommended but it's up to you when purchasing a label.

no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive your payment as long as your order is verified before I head out to drop off packages at USPS/FedEx.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it shows confirmations >=1, this is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  Bitcoin is designed in a way to allow you to confirm and see what you've done.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been received and verified.  I do not accept returns or issue refunds once your order has shipped.  If you sent payment but have not emailed me your label and the signed message, you can ask for a refund.  Refund processing takes a significant amount of time and should not be expected instantly.  Transaction fee will be deducted from total amount refunded.

----------------------

Ordering:

There is one common payment address: 1Kt9enkaUCpqqFTok1wbFv6hTgWpg29kV6

To buy:

pick the number of AntMiner U1 USB devices to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Warranty
90 days. per manufacturer, overclocking voids the warranty.

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[CLOSED]

Setup Guide: https://bitcointalk.org/index.php?topic=352658.0

CLOSED  each cube is verified to run and no Xs.  when you receive it, you should still make sure all cards are seated properly.

One Cube is .39 btc.   more pictures are here (thank you yxt!!): https://bitcointalk.org/index.php?topic=335440.0
Order 8 Cubes at once and pay .34 btc per Cube.  Requires a 50 lbs label. 16x16x16 box dimensions.


Payment address: 1KjXGLJ2zcZ62a9BDp9i3fgZmiAfLDMch1

You will need to email me a label per below info (please read the OP in it's entirety).  If you want to spend btc on shipping, add .04 to the cost of a Cube and have me generate a label for you.  you spending USD on creating your own label is your most cost effective option however.  described below:

For shipping, each cube will be in it's own 8x8x8 box. each box is 7 pounds. you should consider insurance, but it's up to you...

so if you have 2 cubes on order, you'll send 2 labels, 1 for each cube.
3 on order, send 3 labels etc... etc...

it's important that the weight is 7 pounds on the label for each cube.  if it's not, post office could delay shipping.

IFF you order 8, then you will need 1 label with 50 pounds of weight and I do recommend FedEx label for this case.  8 Cubes will ship in 1 box.

those who have fedex accounts or can email me a fedex label, you can do so.

When creating the labels via USPS/FedEx, it's up to you to choose the type of service: Priority/Express, Ground/Next Day etc...

~30 Gh/s guaranteed speed, with overclocking and proper cooling & power they can reach speads of 38Gh/s.  
Spec power consumption, approximately 200W, and 280W+ when over-clocked
135.5 mm x 152.5 x 147.5


no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0
International buyers: please contact your respective re-seller: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

I am located 4 miles from a MAJOR DHL and FedEx hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.  Refund processing takes a significant amount of time and should not be expected instantly.

----------------------

Ordering:

There is one common payment address: 1KjXGLJ2zcZ62a9BDp9i3fgZmiAfLDMch1

To buy:

pick the number of ASICMiner Block Erupter Cubes to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Shipment:
The cubes will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[Next batch is up: https://bitcointalk.org/index.php?topic=349787.0]

Next batch is up: https://bitcointalk.org/index.php?topic=349787.0

Shipping label instructions: https://bitcointalk.org/index.php?topic=339499.msg3741832#msg3741832

THIS GROUP BUY IS SOLD OUT. please do not send any more payments.  I will have to refund them, it's sold out.

This is a group buy.  I am placing the order with friedcat today for a sizable amount of Cubes.  Once I have tracking/shipping info from him, I will post here.
You should expect that the Cubes will ship to you Monday/Tuesday (a conservative estimate on my part but it's just that, an estimate).  
If friedcat ships these out in the next day, they might arrive by Friday and I'll ship them Friday/Saturday to you.

One Cube is 1.0 btc.   more pictures are here (thank you yxt!!): https://bitcointalk.org/index.php?topic=335440.0



Payment address: 1LCz6NgE5MdmpKb328nGMjF5Z5TeKhxBqX

Payback analysis: http://mining.thegenesisblock.com/a/fc7883b560 (DO YOUR OWN ANALYSIS!!! my assumptions may not be correct don't rely on them except for your own ALWAYS)

I anticipate being able to ship several units in a medium box and will have to experiment with large box once the units arrive.

Once the Cubes arrive, I will post shipping configurations so that you can send me a label.

I also think that the most effective way to ship 1 Cube will be a Region A box, which should be the most economical way for you to receive it.

~30 Gh/s guaranteed speed, with overclocking and proper cooling & power they can reach speads of 38Gh/s.  
Spec power consumption, approximately 200W, and 280W+ when over-clocked
135.5 mm x 152.5 x 147.5

I have 49-port Hubs in stock @ .30 btc but I do not have any USB miners:


Some more pics of the 49 port hub are here: https://bitcointalk.org/index.php?topic=303640.msg3428585#msg3428585

no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0
International buyers: please contact your respective re-seller: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

15.16TH/s - 15,161,963 MH/s MH/s producing, ASICMiner USBs and Blades have been distributed by me so far.

I am located 4 miles from a MAJOR DHL and FedEx hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

Status updates:

2013-08-18: HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.

----------------------

Ordering:

There is one common payment address: 1LCz6NgE5MdmpKb328nGMjF5Z5TeKhxBqX

To buy:

pick the number of ASICMiner Block Erupter Blades to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[CLOSED]

CLOSED

only 5 blades left.

PROMO: If you have bought a blade from me before and you had emailed me a label, I can extend a .20 btc price for you. limit 1 blade.

I have some backplanes available. .15 btc each.

A blade is 0.25 btc each. 10 blades get a backplane (while supplies last)
Payment address: 1GGFSxxncmXdP9tUSPNPAPi4timLahH191

checkout how the blades are liquid cooled: https://bitcointalk.org/index.php?topic=346134.0

V2 Blades:
Price: .25 btc
for large volume orders, PM me for price and for drop-shipping instructions.




As listed here: https://bitcointalk.org/index.php?topic=286486.0
~10.7 Gh/s. fixed speed. not over-clockable.
Spec: 10GHhash/s guaranteed.
         Rated speed 10.752GHash/s.
         200mm x 160mm in size.

I can now ship 4 blades PLUS a backplane using 1 Priority Large Flat Rate Box label OR 6 blades can be shipped using just 1 Priority Large Flat Rate Box label.

10 blades require 2 medium priority boxes PLUS Region B box, or just 2 Large Priority Boxes.

no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0
International buyers: please contact your respective re-seller: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

15.16TH/s - 15,161,963 MH/s MH/s producing, ASICMiner USBs and Blades have been distributed by me so far.

I am located 4 miles from a MAJOR DHL and FedEx hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

Status updates:

2013-08-18: HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.

----------------------

Ordering:

There is one common payment address: 1GGFSxxncmXdP9tUSPNPAPi4timLahH191

To buy:

pick the number of ASICMiner Block Erupter Blades to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

I have alot of these chips available for sale, please PM me with offers, questions etc...
I sold some here: https://bitcointalk.org/index.php?topic=236103.0
link on bfl site: https://products.butterflylabs.com/65nm-asic-bitcoin-mining-chip.html

Looking to sell the rest...



SOLD OUT. CLOSED

[I DON'T distribute on Craigslist, so anything on Craigslist isn't from me.]

Wow!

I just received a PM from a forum member (1 yr old account) who apparently got scammed on Craiglist by someone trying to make it look like the post is from Canary, thus leading this person to believe they were dealing with me.

I DON'T distribute on Craigslist, so anything on Craigslist isn't from me.

Bummer, I've not had anyone try to impersonate me yet, this feels like shit!!

I have the email exchange forwarded to me by this person and if I get their permission I will post here...

Scammer posts:
http://losangeles.craigslist.org/lac/ele/4171506568.html
http://miami.craigslist.org/mdc/ele/4171497576.html

I'm putting together a quick reddit post to bring some attention to this scam, please upvote if appropriate and share this thread's link as well as reddit's as necessary.  I'd like to bring attention to this problem not only for my purposes but to prevent any further scamming as well as negative publicity to ASICMiner, and ALL resellers of ASICMiner.

reddit:  http://redd.it/1q5kr6

P.S. at the bottom of any CL listing there's a message:
Avoid scams, deal locally! Do NOT wire funds (Western Union, Moneygram).
Beware cashier checks, money orders, shipping, non-local buyers/sellers. More info

It's time for CL to add bitcoin to this list.  It's worse than wiring funds, to send btc first on Craigslist.

PM me...

Saw this on reddit first, reading paper, thought I should share:

http://arxiv.org/abs/1311.0243

http://www.reddit.com/r/Bitcoin/comments/1puk1a/arxiv_paper_majority_is_not_enough_bitcoin_mining/

in stock and shipping (new, assorted colors):
price: 1.75 btc
payment address: 1L3XSZpfsZtEXLwDDYjJfJHncaPxAngAyV
requires ATX PSU that has about 30 Amps on the 5 V rail.  less amps on the 5 V rail will not power all 49 USB miners.

[no reasonable offer refused]

I have 49-port Hubs back in stock, but no USBs.  Hubs only. PM me for quotes etc...

Only blades are available at this point

I have extra backplanes for blades.  asking price .25 btc (requires Region B label) no reasonable offer refused.

A single blade is 0.65 btc. 10 blades get a backplane (while supplies last)  For multiple blades (2+), PM me for a quote
Payment address: 1L3XSZpfsZtEXLwDDYjJfJHncaPxAngAyV

11/01/2013: friedcat is out of USBs whatever remains on hand with resellers is it folks.  They are EOL.

10/28/2013: the 49 port hubs are here and shipping: https://bitcointalk.org/index.php?topic=303640.msg3428585#msg3428585 (<-- more pics here)


10/18/2013:  Shipping update: I can now ship 4 blades PLUS a backplane using 1 Priority Large Flat Rate Box label OR 6 blades can be shipped using just 1 Priority Large Flat Rate Box label.

I am flattered that my distribution approach has been copied.  I must be doing something right.  

-----------------------------------------------------
.035 for any qty of USB miners

qty 500+ PM me.

for those with fedex accounts, on orders of 500+ you can send me a Fedex ground label.

10 blades require 2 medium priority boxes PLUS Region B box, or just 2 Large Priority Boxes.

New colors are available for you to get your hands on: https://bitcointalk.org/index.php?topic=280961.0

no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0
International buyers: please contact your respective re-seller: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

You don't need to spend btc on shipping! spend USD instead and provide me with a shipping label you buy

To generate your own label for me to ship with (such as USPS.com/FedEx) : .035btc per unit. (check post #2, will post more instructions there)
how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

V2 Blades:
Price: 1.1 btc
for large volume orders, PM me for price and for drop-shipping instructions.




As listed here: https://bitcointalk.org/index.php?topic=286486.0
~10.7 Gh/s. fixed speed. not over-clockable. USB connection available.
Spec: 10GHhash/s guaranteed.
         Rated speed 10.752GHash/s.
         200mm x 160mm in size.

15.16TH/s - 15,161,963 MH/s MH/s producing, ASICMiner USBs and Blades have been distributed by me so far.

I am located 4 miles from a MAJOR DHL and FedEx hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

Status updates:

don't have enough funds to order?  btcQuick allows anyone to buy bitcoins with their credit card or debit card. Simply sign up, submit verification documentation, then buy bitcoins! Bitcoins are delivered within 15minutes! Fee's start at 7.5% and can be as low as 5.5% visit the page here: https://www.btcQuick.com

2013-08-18: HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.

Product Description:
USB Erupter:
    Each one mines at more than 330MH/s, powered only by the USB port.
    It serves as a replacement of GPUs for mining hobbyists.
    Your GPUs could be freed from calculating hashes and resume rendering for you.
    It is also a perfect gift for getting people to learn about Bitcoin and Bitcoin mining.
    The Sapphire Batch:
    This is the first batch under production in quantity.
    Color of PCB changed to blue
    Adding a LED which blinks when a share is found
    Fixing the cgminer compatibility problem
    Reducing the heat generated and the current to <500mA


The world's smallest Bitcoin miner, powered by the world's first Bitcoin mining ASIC.

----------------------
Note, local pickup is no longer available for orders less than 100 units.

Ordering:

There is one common payment address: 1L3XSZpfsZtEXLwDDYjJfJHncaPxAngAyV

To buy:

pick the number of ASICMiner Block Erupter USBs and/or Blades to order: N.
send the appropriate amount C=N * price  listed above. email me a label. I ship.

ensure the sending btc address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[CLOSED]

9/15/2013: THIS BATCH IS CLOSED
9/14/13 : a dozen blades remain. not sure if I still have them when you read this? PM me.  10 hours to go....
9/13/13: now shipping
a new order of 5+ blades can add a backplane for .25 btc
an order of 10 blades gets the backplane for free
-----------------------------------------------------
Timer removed. End time: 2013-09-14+23:59:59

Blades:
Coming soon

Picture
Coming soon

Online User Guide
Coming soon

Notes
Coming soon

----------------------
Note, local pickup is no longer available for orders less than 100 units.

Ordering:

There is one common payment address: 14ja5p6K1gqYgmZQPCU295UxducKwaT6pw

To buy:

pick the number of ASICMiner Block Erupter USBs and/or Blades to order: N.
send the appropriate amount C based on Pricing paragraph above. email me a label. I ship.

ensure the sending address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[SOLD OUT!!!]

SOLD OUT!!!

Folks, I'm clearing out inventory of ASICMiner blades.

In stock.  ships immediatly.  cost: 5 btc per unit.  payment address: 1J8pizGa3X3FWBqBC6tbw8UyeJt1JgWQHB

email me a label to canary.btc@gmail.com (please look at group 22/23 for an example of a shipping label creation)

for qty 10-19, the price is 4 btc each.

qty 20+ not available from me.

[OPEN to anyone who wishes to purchase the coupon unit at .15 btc. no per customer limit. while supplies last.]

Timer removed. End time: 2013-09-14+23:59:59
-----------------------------------------------------
OPEN to anyone who wishes to purchase the coupon unit at .15 btc. no per customer limit. while supplies last.
these are extra's and I'm not shipping internationally.

------------------------------------------------------------
EXTRAS available!!! If you are a domestic customer from groups 1-11, you can buy more. Please PM me with your request. While supplies last.  Payment addy for extras: 15HJTCu5d87FMdczKJ2fLXHj4t3LcT77hn
------------------------------------------------------------
Finally!!!

Everyone has been PMed about their coupons.  it's done.
------------------------------------------------------------

Received word that a shipment has been sent to me to continue implementing remaining coupons distribution.  Expected arrival is 8/27/2013.

ASICMiner's wishes are that it be a 1:1 promo.  meaning that if you bought 1 miner you get 1 .10 coupon.  if you bought 2, you get 2 .10 coupons if you bought 100, you get 100 .10 coupons etc... etc...

Price is the same as on the first batch: .15 per unit which includes domestic shipping.  International buyers will have additional shipping fees and they will be worked on per order.  International orders may not be processed as fast as domestic orders due to additional handling time to get shipping quotes.

You are welcome to email me a label if you want fedex/express or otherwise your own shipping method (domestically only).

P.S. unwanted coupons will be offered to the next person in line.  I will not be facilitating or participating in coupon transfers/sales etc... My main goal right now is to get the units out to you ASAP.

the remainder of group #11 through group #6 are covered by this batch of inventory: You will be receiving a PM with specific instructions on how to redeem your coupons.

group #5 and below will not be receiving PMs with instructions until additional inventory arrives.

P.S. if I don't hear from you in a week, your coupons are forfeited and will be made available for group #5 buyers and so on.

9/6/2013: 120 folks have been PMed from groups 1-5 with redeeming instructions.  this is my limit for posting.  the rest will be PMed in the morning

[USB miners - Stock in hand. Shipping to you today when you place your order]

USB miners - Stock in hand.  Shipping to you today when you place your order
I have no more blades in stock as of now...  8/27/13 more are on their way.
With the recent run up in btc, don't spend it on shipping!! Pay with fiat for shipping instead.

- no PMing me your shipping address as a signed message anymore.  You will sign 1 string only: tracking # of your label/s
friedcat's post is here: https://bitcointalk.org/index.php?topic=270573.0
International buyers: please contact your respective re-seller: https://bitcointalk.org/index.php?topic=270573.0

I provide The Fastest delivery to you, bar none!

This batch has a simple setup.  you pay 1 price, provide a label and I ship.  I don't care where you want me to ship it to (domestically).

Price is .33 per USB miner.  Prices for blades are 10.50 btc.  Payment address: 19xofxS7vkmwoNgc52RVJtrU8XjN6VQ8pG

For Volume Pricing, see here: https://bitcointalk.org/index.php?topic=276441.0

USB miners:
If you want me to  handle shipping (creating a label) please order from www.bitCanary.com or purchase a branded and tested miner from Eligius mining pool here: http://eligius.st/~gateway/products/block-erupter-sapphire

You don't need to spend btc on shipping! spend USD instead:

For this group buy you must provide me a shipping label.  If you prefer not to and want me to handle shipping, then please place your order through www.bitCanary.com or through Eligius pool instead.

To generate your own label for me to ship with (such as USPS.com/FedEx) : .33 btc per unit. (check post #2, will post more instructions there)
how to create a shipping label by BorisAlt: https://bitcointalk.org/index.php?topic=277332.msg2971486#msg2971486 (shipping from zip 60181)

Blades:

10.5 btc each (you supply the shipping label) I have a limited supply of blades on hand to ship out

use a btc calculator and you will see that everyday, the blade is good for ~0.12889410 btc generated (using next estimated difficulty).  my shipments are lighting fast and I'm the fastest reseller.  so, if it takes you 2 extra days to receive your blade, it's like giving up 0.2577882 btc.  you want them in your hands ASAP, and that means letting me handle your orders.  please take a second to understand this  I can clarify if you'd like. just let me know.

Setup guide for blades: https://bitcointalk.org/index.php?topic=205369.0
Original info and specs on blades: https://bitcointalk.org/index.php?topic=204030.0

6.32TH/s - 6,323,363 MH/s producing, ASICMiner USBs and Blades have been distributed by me so far.

I am located 4 miles from a MAJOR DHL hub that receives these orders from China.  My delivery times are the best.  packages sent to me by ASICMiner are in my hand the same day they enter US.  They do not take an extra day or two to travel the country to get to me.  It takes me 11 minutes to drive to DHL when necessary.   My location is in a major metropolitan area next to a LARGE international airport that is a hub for shipping for all delivery companies.  This gives me access to DHL, FedEx (also just 4 miles away, open till 9 PM for next day shipping).  I have access to several Post Offices around me.  I can ship USPS till 7 PM.  I ship to you the same day I receive my delivery.  Simply put, I am in the best position geographically and logistically to receive an order and to get it out to you ASAP.  Period.

Status updates:

don't have enough funds to order?  btcQuick allows anyone to buy bitcoins with their credit card or debit card. Simply sign up, submit verification documentation, then buy bitcoins! Bitcoins are delivered within 15minutes! Fee's start at 7.5% and can be as low as 5.5% visit the page here: https://www.btcQuick.com

2013-08-18: HOW TO SIGN A MESSAGE TO ME (YOUR SHIPPING INFO): https://bitcointalk.org/index.php?topic=195647.msg2291965#msg2291965 Please NOTE: the above example is NOT the same as sending a signed message with your transaction. If you are new to this (aka noob), please read this so that you understand what to do.  This is the single most problematic step in the ordering process.  Here's how to sign a message with a blockchain.info wallet: https://bitcointalk.org/index.php?topic=180068.0 Please verify the signed message yourself before you send it to me

how to send a shipping label:
you will essentially download a pdf label from usps and email it to canary.btc@gmail.com (email used for labels only, contact with questions via PM here)
in the body of the email, you will have 4 things:
1. transaction id of your order
2. 1st payment address of the transaction
3. tracking number (no spaces)
4. Signature (your will sign ONLY the tracking # from item #3)
additionally, if you use this method, you no longer need to PM me shipping address as a signed message.  trying to make things simpler for all.
I will check that the tracking number in item 3 matches the label exactly.
See post #2 below for an example.

Common Questions:
When will I receive my order? Answer: I ship out the same day I receive inventory from ASICMiner/friedcat.  I do reserve up to 1 day to get it done in case DHL delivers later in the day.

Can you confirm my order? Answer:  you can confirm your own order by looking up the transaction id of your payment.  if it has confirmations that is your confirmation that your funds were received.  This is what I would do to "confirm" your order.  bitcoin is designed in a way to allow you to confirm and see what you've done.

Folks and miners,

As announced in the Official ASICMINER Hardware Information thread, I am a reseller in the USA of ASICMiner products.  International buyers, please contact your respective re-sellers.

Please Note:
Only send payments from an address you control (i.e. you can sign with it). If you send from MtGox or other exchanges, you risk loosing your funds since you can't prove you sent them. Please send from a wallet you can sign a message with.  You will send your shipping address via this method.

Policy update:
Refunds: Your orders are binding after your funds have been used to pay for an order.  Before that (while coins are piling up for the next batch), you can ask for a refund and will get it paid back in full. Understand that after you get refunded, I will not accept future orders from you.

Product Description:
USB Erupter:
    Each one mines at more than 330MH/s, powered only by the USB port.
    It serves as a replacement of GPUs for mining hobbyists.
    Your GPUs could be freed from calculating hashes and resume rendering for you.
    It is also a perfect gift for getting people to learn about Bitcoin and Bitcoin mining.
    The Sapphire Batch:
    This is the first batch under production in quantity.
    Color of PCB changed to blue
    Adding a LED which blinks when a share is found
    Fixing the cgminer compatibility problem
    Reducing the heat generated and the current to <500mA


Blades:
----------------------
Hashrate: baseline 10GHash/s, rated 10.752GHash/s, maximum 12.829GHash/s with overclocking and proper cooling
Power Consumption: 70-75W on 1.03-1.05V, 83W on 1.1V, 100W on 1.2V, 120W on 1.2V and overclocking
Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back
Power module size: 192mm x 89mm
Ethernet controller size: 86mm x 40mm  

Picture

Complete Album
http://imgur.com/a/PkOcu#0

Online User Guide


Notes
  1. Fans are not accompanied with blades anymore. They were more or less intended to serve as a help of quick setup and mining testing for users who haven't got proper cooling yet, but turns out to be quite misleading by making people think the fans are powerful enough to cool the (already)over-voltaged and (easily)over-clocked blades.
  2. To make the whole shipping process smooth enough, no more racks are given out or for sales. As a compensate we practice the bulk price discount as shown above.
  3. Please be aware that the payment processing and shipping will be less prioritized than the remaining orders in the third auction. It may be 1-2 days less timely before the third auction's shipping is completed. After that it will resume the instant-style speed.
----------------------
Note, local pickup is no longer available for orders less than 100 units.

Ordering:

There is one common payment address: 19xofxS7vkmwoNgc52RVJtrU8XjN6VQ8pG

To buy:

pick the number of ASICMiner Block Erupter USBs and/or Blades to order: N.
send the appropriate amount C based on Pricing paragraph above. email me a label. I ship.

ensure the sending address is under your control, so you can sign with it in case of disputes

Shipment:
The USB miners/blades will be shipped to you same day I receive them but not longer than 1 day of me receiving them (just in case DHL has a very late delivery for ex.).

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) and have a day-job that allows me ample time to devote to this endeavor. I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary

[USA only]

If you are interested in reselling or you already are a reseller, you can place your orders with me for drop shipping to you.

You should receive your order in 4-6 business days (depends on your location) from the warehouse, you will not wait for me to re-ship to you.
 
If you are a re-seller or wish to get in on the action, I can have ASICMiner products shipped to you from the warehouse.

USA only:

500 USB miners for 152.5 btc (you will receive 510 miners in total, where the 10 extras are to cover any warranty claims from the 500 ordered)

10-34 blades are 10.1 btc each (any warranty will be going though the manufacturer and may take longer to handle)
 
35 blades for 353.5 btc (you receive 1 extra blade to cover any warranty related issues)

The best part is that you don't need to wait for me to re-ship these to you.  you get them the fastest way possible.
for larger quantities, please PM me.

There is one common payment address: 18ecBu6Z4NeQ6ZQrDwH77RuR1sqjg7yzhy

Product Description:
USB Erupter:
    Each one mines at more than 330MH/s, powered only by the USB port.
    It serves as a replacement of GPUs for mining hobbyists.
    Your GPUs could be freed from calculating hashes and resume rendering for you.
    It is also a perfect gift for getting people to learn about Bitcoin and Bitcoin mining.
    The Sapphire Batch:
    This is the first batch under production in quantity.
    Color of PCB changed to blue
    Adding a LED which blinks when a share is found
    Fixing the cgminer compatibility problem
    Reducing the heat generated and the current to <500mA


Blades:
----------------------
Hashrate: baseline 10GHash/s, rated 10.752GHash/s, maximum 12.829GHash/s with overclocking and proper cooling
Power Consumption: 70-75W on 1.03-1.05V, 83W on 1.1V, 100W on 1.2V, 120W on 1.2V and overclocking
Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back
Power module size: 192mm x 89mm
Ethernet controller size: 86mm x 40mm  

Picture

Complete Album
http://imgur.com/a/PkOcu#0

Online User Guide


Notes
  1. Fans are not accompanied with blades anymore. They were more or less intended to serve as a help of quick setup and mining testing for users who haven't got proper cooling yet, but turns out to be quite misleading by making people think the fans are powerful enough to cool the (already)over-voltaged and (easily)over-clocked blades.
  2. To make the whole shipping process smooth enough, no more racks are given out or for sales. As a compensate we practice the bulk price discount as shown above.
  3. Please be aware that the payment processing and shipping will be less prioritized than the remaining orders in the third auction. It may be 1-2 days less timely before the third auction's shipping is completed. After that it will resume the instant-style speed.
----------------------
Note, local pickup is no longer available for orders less than 100 units.

Ordering:

There is one common payment address: 18ecBu6Z4NeQ6ZQrDwH77RuR1sqjg7yzhy

To buy:
Send required funds, PM me, post here, whichever is easier for you.

Shipment:
The USB miners/blades will be shipped to you 4-6 business days after you make your payment.

Communication:
I live in Chicago (CST time zone: UTC/GMT -5 hours) I do sleep at night, so if I don't answer at night, please be patient.  I'm pretty open and transperant with info.  I post it as soon as I have it, I do not withhold from anyone.  Please respect everyone's time.

Cheers,

Canary