The ban is in 6 states. It is for 3070 and for 3080 models  |
|
|
|
Changed title to reflect that I did 2 builds and will do more. build 1 1 kit from mynode rasp pi 4 prebuilt 99 USD worth of firmware/soft ware 1 samsung t5 ssd build 2 1 kit from amazon rasp pi 4 8gb ram 1 t5 samung ssd 99 USD worth of mynode firmware/software build 3 and build 4 to follow So I grabbed a 4gb rasp pi kit from their website. and I attached my own 1 tb Samsung https://www.amazon.com/Samsung-T5-Portable-SSD-MU-PA1T0B/dp/B073H552FJ/ref=sr_1_3?I am close to done with synch almost 3 days I have lots of questions and would like to create a FAQ thread on mynode.  |
|
|
|
|
Yahoo article says 19 to 1 ratios in the hospitals
USA TODAY
People hospitalized with COVID-19 now have one overwhelming thing in common. They're not vaccinated.
Elizabeth Weise and Aleszu Bajak, USA TODAY
Wed, June 16, 2021, 10:48 AM
In Minnesota, the HealthPartners system has seen a “precipitous decline” in COVID-19 hospitalizations, says Dr. Mark Sannes, an infectious disease physician and senior medical director for the system, which operates nine hospitals and more than 55 clinics. But now, nearly every admitted patient he does see is unvaccinated.
“Less than 1% of our hospitalized COVID patients are vaccinated," he said.
In Ohio, at University Hospitals Cleveland Medical Center, only 2% of the COVID-19 patients admitted in the last month were vaccinated, said Dr. Robert Salata, the hospital's physician-in-chief.
And at Sanford Health, which runs 44 medical centers and more than 200 clinics across the Dakotas, Minnesota and Iowa, less than 5% of the 1,456 patients admitted with COVID-19 so far this year were fully vaccinated, said spokesperson Angela Dejene.
Falling rates of COVID-19 across the United States mask a harsh reality – the overwhelming majority of those getting sick and being hospitalized today are unvaccinated, while vaccinated patients are becoming rare.
Hospitals in states with the lowest vaccination rates tend to have more COVID-19 patients in intensive care units, according to hospital data collected in the past week by the Department of Health and Human Services and vaccination rates published by the Centers for Disease Control and Prevention.
Wyoming, Missouri, Arkansas and Idaho currently have the highest percentage of COVID-19 patients on average in their ICUs; those states all have vaccinated less than 40% of their population.
Medical centers say there's also an obvious change in the age of their sickest patients, as older people are much more likely to be vaccinated than younger.
"We're all seeing the same thing – when someone does get sick and comes to the hospital, they're much more likely to be young and unvaccinated," said Dr. Robert Wachter, professor and chair of the Department of Medicine at the University of California, San Francisco.
Cathy Bennett, president and CEO of the New Jersey Hospital Association, said the picture is the same in her state.
"As COVID vaccinations rolled out across New Jersey, there’s been a major shift in the ages of patients admitted to the hospital," said Bennett. "Unlike last spring, when those 65 and older accounted for the majority of hospitalizations, we’re now seeing more young people hospitalized with COVID."
In Ohio, Salata said the shift should be reassuring, showing the vaccines work.
"It sends a very strong message to the hesitancy people out there because the data speaks for itself," he said.
'It's not all about you'
Doctors say there are multiple reasons people aren't yet vaccinated. There are the hesitant, who still have questions and sometimes fall prey to misinformation, and the opposed, who often harbor anti-government or anti-science sentiments.
"We've had a little success when we've spoken to them on a one-to-one basis. We can give them the information that they need to make their decision," said Dr. Gerald Maloney, chief medical officer for hospital services at Geisinger health network, which runs nine hospitals in Pennsylvania.
Some still can't easily access vaccine, either because it's not available nearby or because they can't get time off work.
And while the U.S. government paid for all vaccines and vaccinations so no one should be charged, others remain fearful they will be on the financial hook for a shot, Maloney said.
Eleanor Leisenring speaks with Cheryl McHale, RN, after receiving the COVID-19 vaccine at a Geisinger community vaccine center in Danville, Pa.
Eleanor Leisenring speaks with Cheryl McHale, RN, after receiving the COVID-19 vaccine at a Geisinger community vaccine center in Danville, Pa.
Last week, Health and Human Services secretary Secretary Xavier Becerra clarified in a letter that providers may not bill patients for COVID-19 vaccines.
There's still a lot of work to be done to create the trust necessary for these groups to embrace vaccination, Maloney said.
"The people who say, 'It's my body, my choice?' Well, it's not all about you," he said. "It's also about the people that you're around."
At this point, every vaccination is a win, one more person who can't pass the virus along. That's especially true in families where children can't be vaccinated and are still at risk.
At Akron Children’s Hospital in Ohio, “we have not seen any kiddos who have been admitted to the hospital who have been vaccinated,” said Dr. Michael Bigham, a pediatric intensivist in the critical care unit.
Among children 11 and younger, who can’t yet get the vaccine, having vaccinated family members is keeping them out of the hospital, and protecting them against MIS-C, the multisystem inflammatory syndrome that can be a rare but dangerous aftereffect of a COVID-19 infection in children.
“Most of the kids we’re seeing in the hospital with COVID or MIS-C had COVID in their household, maybe a parent or a grandparent, and most of those individuals had not been vaccinated,” he said.
The message from health care workers is unanimous: They just aren't seeing many vaccinated people get sick.
In New Jersey, the percentage of COVID-19 hospitalizations among those ages 18 to 29 has increased 58% since the beginning of the year. By comparison, the percentage of COVID-19 hospitalizations among the 65 and older age group – with a statewide vaccination rate of more than 80% – declined by 31.2%.
The numbers are no coincidence, Bennett said.
"Vaccination," she said, "works in preventing severe COVID illness."
This article originally appeared on USA TODAY: Majority of COVID-19 hospital patients in US now unvaccinated, younger
Note I copy paste from yahoo
|
|
|
|
I would pay a fair price now that lbry has crashed these are not worth as much https://coinmarketcap.com/currencies/library-credit/coin was 49 cents in April it crashed to 10 cents So if you want to bail and not be stupid about asking price contact me. they came out at $899 plus tax and shipping say 1100 they now earn 2-3 a day or 400 to 600 day pay out. you have a chance to bail if you want. I would take 1 or 2 or 3 of them. at Ball park breakeven for you. translation say ballpark numbers of : 970 for 1 shipped to me in USA NJ 1840 for 2 shipped to me in USA NJ 2700 for 3 shipped to me in USA NJ I escrowed thousands in gear. Terms are I self escrow and pay in USDT BTC or LTC. Upon delivery to me. And a day to test them out. I will visit this in a while but if you are a bit scared of a bigger collapse I can help with a buy. LOOKING for usa seller to avoid import bs. This will be limited offer and I will lower prices offer on a daily basis. price is based on a 10 cent LBRY coin. |
|
|
|
First off it works! https://solo.ckpool.org/users/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3... { "hashrate1m": "2.02T", "hashrate5m": "1.26T", "hashrate1hr": "170G", "hashrate1d": "8.98G", "hashrate7d": "786G", "lastshare": 1622133846, "workers": 1, "shares": 108280490392, "bestshare": 64521788607.07417, "bestever": 190888533457, "worker": [ { "workername": "146UJM5kgzLVUV23CXCf33KQKHckoX1gx3.future", "hashrate1m": "2.02T", "hashrate5m": "1.26T", "hashrate1hr": "170G", "hashrate1d": "7.44G", "hashrate7d": "1.06G", "lastshare": 1622133846, "shares": 160000, "bestshare": 288744.0198194308, "bestever": 288744 } ] } ... It is pointed at ck solo pool it is pulling 126 - 130 watts on the kill-a-watt meter |
|
|
|
|
Spacer
I have been running difficulty threads for BTC in the BTC mining section.
I have had too many complaints and censorship that I include alt coins in the threads as explanations as to why BTC diff is down. Rather than fight against the idea of BTC maximalism I will post here in this thread.
I will not delete other than:
fuck blow me bitch type posts
I will kill you posts
All opinions are welcome.
|
|
|
|
Hi,
I'm looking at graphic cards an mining rigs like Antminer s19 and cant understand the hash rate. How can a graphic card that are on MH/s compete with a rig that is on TH/s?
Thanks!
Legit question. from a newbie. a nvidia 3080 does 100 mhs mining ⛏ eth about 9 cents a mh so it earns between 9 and 10 usd worth of the coin eth. before power cost. a bitmain s19pro does 110th mining ⛏ btc about 38 cents a th or 41-42 a day before power cost technically gpu mining no longer mines btc directly. but many use a gpu to mine an alt and then trade the alt to btc. if you were looking at nicehash you may have seen the 3080 nvidia gpu was paying you 9 or 10 a day in btc. they left out the inbetween which is it was mining eth that was converted to btc. I mine eth ltc/doge btc bch I tend to trade all the coins above into cash and btc. most of my coin wealth is in btc. |
|
|
|
|
Rules of thread be somewhat polite.
any coin can be discussed.
any wealth of any kind can be discussed.
So how do you judge a market and try to gather up your wealth. Either defend what you have or add to what you have.
Do you say we are turning bull?
Do you say we are turning bear?
Do you try to to be Minotaur. ie a thinking bull.
|
|
|
|
|
Need 5 or more L3+ I can pay in BTC or LTC
I am USA based.
I usually self escrow.
let me know what you have in terms of L3+
|
|
|
|
Sold! So I have a crippled blower card. I don't know how to fix it. But it does mine on smos. It does 9mh at 75 watts. It should do 40 at 175 watts with todays crazy high mining profits it does make 1.08 usd pre power and burns about 85 watts or 2kwatts a day. so if you have 20 cent power it makes about a 70 cent profit. if you know how to fix the issue it would be a score. Make an offer USA buyers only   |
|
|
|
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203504K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25872K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12832K (cce79000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 306349061
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4957/2948, WL threshold: 4096, image sequence number: 1751317449
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-01-31 19:27:01 driver-btm-api.c:758:init_freq_mode: This is scan-user version
2021-01-31 19:27:01 driver-btm-api.c:1954:bitmain_soc_init: opt_multi_version = 1
2021-01-31 19:27:01 driver-btm-api.c:1955:bitmain_soc_init: opt_bitmain_ab = 1
2021-01-31 19:27:01 driver-btm-api.c:1956:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-01-31 19:27:01 driver-btm-api.c:1957:bitmain_soc_init: Miner compile time: Tue Aug 20 10:37:07 CST 2019 type: Antminer S17 Pro
2021-01-31 19:27:01 driver-btm-api.c:1958:bitmain_soc_init: commit version: 4b64fd6 2019-08-19 22:09:12, build by: lol 2019-08-20 10:47:29
2021-01-31 19:27:01 driver-btm-api.c:1776:show_sn: no SN got, please write SN to /nvdata/sn
2021-01-31 19:27:01 driver-btm-api.c:1236:miner_device_init: Detect 256MB control board of XILINX
2021-01-31 19:27:01 driver-btm-api.c:1184:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-01-31 19:27:01 thread.c:653:create_read_nonce_reg_thread: create thread
2021-01-31 19:27:07 driver-btm-api.c:1168:init_miner_version: miner ID : 8114b5ca79104814
2021-01-31 19:27:07 driver-btm-api.c:1174:init_miner_version: FPGA Version = 0xB013
2021-01-31 19:27:12 driver-btm-api.c:820:get_product_id: product_id[0] = 0
2021-01-31 19:27:12 driver-btm-api.c:820:get_product_id: product_id[1] = 0
2021-01-31 19:27:12 driver-btm-api.c:820:get_product_id: product_id[2] = 0
2021-01-31 19:27:12 driver-btm-api.c:771:_set_project_type: project:0
2021-01-31 19:27:13 driver-btm-api.c:796:_set_project_type: Project type: Antminer S17 Pro
2021-01-31 19:27:13 driver-btm-api.c:807:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-01-31 19:27:13 driver-btm-api.c:808:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-01-31 19:27:13 driver-btm-api.c:807:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-01-31 19:27:13 driver-btm-api.c:808:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-01-31 19:27:13 driver-btm-api.c:807:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-01-31 19:27:13 driver-btm-api.c:808:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-01-31 19:27:13 driver-btm-api.c:1877:bitmain_board_init: Fan check passed.
2021-01-31 19:27:14 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-01-31 19:27:18 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-01-31 19:27:19 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-01-31 19:27:23 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-01-31 19:27:25 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-01-31 19:27:28 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-01-31 19:27:28 thread.c:648:create_pic_heart_beat_thread: create thread
2021-01-31 19:27:28 power_api.c:202:power_init: Power init:
2021-01-31 19:27:28 power_api.c:203:power_init: current_voltage_raw = 0
2021-01-31 19:27:28 power_api.c:204:power_init: highest_voltage_raw = 2100
2021-01-31 19:27:28 power_api.c:205:power_init: working_voltage_raw = 1830
2021-01-31 19:27:28 power_api.c:206:power_init: higher_voltage_raw = 1950
2021-01-31 19:27:28 driver-btm-api.c:1887:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-01-31 19:28:00 power_api.c:246:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-01-31 19:28:06 power_api.c:82:check_voltage_multi: retry time: 0
2021-01-31 19:28:08 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.228603
2021-01-31 19:28:10 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.124511
2021-01-31 19:28:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.075527
2021-01-31 19:28:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.142881
2021-01-31 19:28:12 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.14, check voltage passed.
2021-01-31 19:28:12 uart.c:71:set_baud: set fpga_baud to 115200
2021-01-31 19:28:12 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-01-31 19:28:12 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-01-31 19:28:12 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-01-31 19:28:24 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0
2021-01-31 19:28:36 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0
2021-01-31 19:28:47 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-01-31 19:29:00 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-01-31 19:29:11 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-01-31 19:29:11 driver-btm-api.c:1138:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-01-31 19:29:17 driver-btm-api.c:333:set_order_clock: chain[0]: set order clock, stragegy 3
2021-01-31 19:29:17 driver-btm-api.c:333:set_order_clock: chain[1]: set order clock, stragegy 3
2021-01-31 19:29:17 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0x34
2021-01-31 19:29:17 voltage[0] = 1700
2021-01-31 19:29:17 voltage[1] = 1700
2021-01-31 19:29:17 power_api.c:214:set_working_voltage_raw: working_voltage_raw = 1700
2021-01-31 19:29:18 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 driver-btm-api.c:191:set_miner_status: ERROR_TEMP_LOST
2021-01-31 19:29:19 driver-btm-api.c:132:stop_mining: stop mining: Can't get temperature sensor type!
2021-01-31 19:29:19 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2021-01-31 19:29:19 driver-btm-api.c:118:killall_hashboard: ****power off hashboard****
Any guesses I can see chain 2 looks dead 2021-01-31 19:28:47 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-01-31 19:29:00 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-01-31 19:29:11 driver-btm-api.c:1111:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
not familiar with this: 2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
2021-01-31 19:29:19 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 8, type = 0x0, retry.
|
|
|
|
|
Went to Clifton cleaned gear.
ON the way home buysolar took me to his house and gave me the s19pro.
I will do review today and tommorrow.
|
|
|
|
|
I have had multiple people ask me if I know anyone that repairs gpus.
So does anyone repair gpus?
USA based please.
|
|
|
|
|
Show Posts
