Hi guys, why i get this hashrate? Up and down static it is normal? Someone knows this problem?☝ Could be GPU overclock/voltage issue, could be internet connection issue. But IMO you may need to discover which card gives memory errors and try to fix it. Then you will get better results. The problem is claymore don't give me any error. So wjat could be? Internet? I am using sim card with smartphone hotspot wifi i still don't have adsl in the office
|
|
|
Well share how did you fix it, god damn! If you ask on board, than share also!
I 200% agree
|
|
|
Hi guys, why i get this hashrate? Up and down static it is normal? Someone knows this problem?☝
|
|
|
Something I really dislike about your miner Claymore is the fact that if I'm dual mining ETC, when DevFee starts I lose another 30-40 seconds because it needs to swap to a different DAG and then after DevFee ends it changes again to a different DAG (132 on ETC 130 on ETH). I really, really dislike it about your miner. Just set an ETC pool for your devfee if mining ETC for christ sake, I understand you do a good job with your miners (you also make an awful lot of money, but it's cool anyway, it's deserved), but that's a long way from 1-2%, it's much closer to around 5% of lost hashrate each our with this dag swapping.
You can use pools that accept wallet address directly and remove "-allpools 1" option. Hi Claymore, Because of the AMD init bug (where cards are not initiated sequentially) the current miner version (9.5) is unable to know which card is which. After looking at HWiNFO I noticed that each card has a DeviceInstanceId which doesn't change when I reboot my machine. Why can't I use that to target a OC on that card? Right now every time my machine reboot I have to manually OC each card (Kinda annoying). Doesn't sound like an easy implementation but it doesn't hurt to ask Miner cannot read DeviceInstanceId via OpenCL. But recently I finally found a way to match the OpenCL list of GPUs and the list of GPUs that is used in ADL for temperature/fans/OC management, it must help, I will try to put it in next update. Also now I can enumerate GPUs as AfterBurner does. Which is the way for?
|
|
|
Anyone using the MSI Z170-A Pro for more than 4 GPUs?
I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.
I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.
Any ideas?
i dont like Windows for mining... but what psu do you have? are gpus on stock settings? I have that motherboard and i am mining with 6 gpu as well... I remember i had to update the bios to the last version and enable the 4g decoding I have to check when i go in the office for be sure. But it run 6 gpu very good I have the same Mainboard. I run 7GPUs GTX 1070 on that. Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfII have 4GB RAM, Windows 10 X64 I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT. Oh yes i forgot you have to transform windows 10 in uefi mode gpt. If you have difficulty in this you can use aoemi partition assistant it will transform your mbr into gpt in 3 seconds without struggling.... I had to transform gpt hard drive and boot for all my rigs otherwise you won't be able to use more than 4 gpu
|
|
|
Hi guys, why i get this hashrate? Up and down static it is normal?
|
|
|
I started getting a strange unspecified launch failure error running ETH+SC.. It'll work for a few shares, then crash and restart. Does anyone know what's causing it? maybe a fiew more details... maybe too over/under clocked/under volted how many gpus? maybe faulty riser faulty gpu.... and so on... maybe only update the miner.... Happen to me too.. i don't remember how i resolved. Maybe is the -dcri problem. Try to put -dcri 16 or 14
|
|
|
With LBC , I have a huge impact on ETH mining. For my 6 RX480 rig, I have :
ETH + SC : 179 + 2860 with dcri 16 ETH + LBC : 169 + 159 with dcri 14
Do you have the same results ?
Sia has different hashrate. It is normal
|
|
|
Anyone using the MSI Z170-A Pro for more than 4 GPUs?
I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.
I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.
Any ideas?
i dont like Windows for mining... but what psu do you have? are gpus on stock settings? I have that motherboard and i am mining with 6 gpu as well... I remember i had to update the bios to the last version and enable the 4g decoding I have to check when i go in the office for be sure. But it run 6 gpu very good
|
|
|
I'm building my first rig with 4xGigabyte Wind force OC 3gb cards in the next week or two. Are people still getting upwards of 21MHs on these with some overclocking?
I'm a little concerned about cooling. They'll be quite close together but I'll have 3 additional 120mm fans to cool it. I should be ok, right?
i have 6x gigabyte windforce 3gb and they mine to 22/23 mh 60%tdp +0 core +900 memory i tried +1000 memory and they pull 23.5/24 but i get error share
|
|
|
Since RX460 cards become more popular, I will add ASM mode for these cards in next update along with some other improvements, it will be available in 2-4 days.
What is the asm? And what about the rx460? They are profitable?
|
|
|
Hi
I want to mine LBC mainly. I have GTX1070 card 8GB.
How i can enable this? I know I have to mine de developer fee too in ETH. Only by switching the DCRI Value?
I add +500 DCRI then LBC makes 170MH/s and ETH 14MH/S.
Any adviceplease?
Idk about +500 I use often +16 But more is the number more is the second coin hashrate. So try -dcri 50 and try to go up
|
|
|
Your overclock?
+50 on every card GPU, +725..875 Memory depending on card, 95TDP. But ETH+SIA it is fully stable. LBRY more memory intensive? Yes lbry is more intensive
|
|
|
Hi guys, ETH+LBRY claymore gives GPU errors after some time and restarts mining. Same settings ETH+SIA - stable. Definitely not the PSU. 4x1060 rig. Any suggestions? Thanks!
Your overclock?
|
|
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. I did this... pointed nicehash stratum on claymore it has worked for all night long at speed 135 mh but in the status page nicehash says i learning 4 eur/day coz my hasharate is 60mh.... why in claymore i had 135 and in the nicehash status site it was so low? If i use the app it recognises 125mh using ethmine and estimated learn is 18 eur/day why happen this?
|
|
|
I am running four 1060 3GB cards and ETH speed is as expected - about 20mh, but all the secondary coins have very low speeds. Total LBRY hashrate is just about 65, total DCR and SC are 750 each. Where is the problem.
I have the exact issue with my 1060 3G. Every card mines 20mh eth, and only 20mhs lbc when in dual. If I mine lbc by itself, it gets 180mhs. I did not have this issue with my AMD Cards. I've been searching and testing to solve this for a week now with no luck. Edit: I've tried on Windows 10 and Ununtu 16.04 with the same result no issues at all guys... ati is way too much better for mine dual coin without losing much hasharate inverse nvidia is not so good for this i have 12 gtx 1060 and i stopped to dual mine with them... no way too slow
|
|
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. Thanks for the reply... Yes i know i can deselect algorithms... but even if i choice dagger hashimoto it always use ethmine... Anyway the best way probably is point it directly by the .bat file and use claymore... You think is more profitable nicehash (receiving bitcoin) than ethermine(getting ethereum)? unsure. im too lazy to check, my rigs are on autopilot with claymore at nicehash and runs for weeks with no intervention. i just like the fact that btc trickles into my wallet every week with no interaction on my part. i dual mine eth/sia with claymore. i do think btc has a better chance to rise long term than eth, so i stick with btc payouts. I dual mime eth+lbc more profitable....i tried all You are right about btc probably.. but you can monthly change eth into btc. I'll try to see the difference of profit
|
|
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. Thanks for the reply... Yes i know i can deselect algorithms... but even if i choice dagger hashimoto it always use ethmine... Anyway the best way probably is point it directly by the .bat file and use claymore... You think is more profitable nicehash (receiving bitcoin) than ethermine(getting ethereum)?
|
|
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
|
|
|
|