preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 01:43:35 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
|
|
|
|
mushtuk
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 01:55:16 PM |
|
I am running four 1060 3GB cards and ETH speed is as expected - about 20mh, but all the secondary coins have very low speeds. Total LBRY hashrate is just about 65, total DCR and SC are 750 each. Where is the problem.
|
|
|
|
cirlama
Jr. Member
Offline
Activity: 156
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 02:10:13 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others
|
|
|
|
Andresdante
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 02:11:59 PM |
|
I have a problem new equipment evga gtx 1070 only produces 2mhs ethereum claymore driver 382.53 what may be the cause of my problem thanks for your help
|
|
|
|
Qazo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 02:29:56 PM |
|
Can anyone help me with problem, i'm cracking my head for more than a week now
version 9.5, dual mining UBQ/DCR every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL
already tried to switch risers, checked all GPU, everything is fine with hardware...
how i can solve this?
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4424
Merit: 3839
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 02:56:12 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do.
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 03:01:22 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. Thanks for the reply... Yes i know i can deselect algorithms... but even if i choice dagger hashimoto it always use ethmine... Anyway the best way probably is point it directly by the .bat file and use claymore... You think is more profitable nicehash (receiving bitcoin) than ethermine(getting ethereum)?
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4424
Merit: 3839
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 03:25:15 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. Thanks for the reply... Yes i know i can deselect algorithms... but even if i choice dagger hashimoto it always use ethmine... Anyway the best way probably is point it directly by the .bat file and use claymore... You think is more profitable nicehash (receiving bitcoin) than ethermine(getting ethereum)? unsure. im too lazy to check, my rigs are on autopilot with claymore at nicehash and runs for weeks with no intervention. i just like the fact that btc trickles into my wallet every week with no interaction on my part. i dual mine eth/sia with claymore. i do think btc has a better chance to rise long term than eth, so i stick with btc payouts.
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 03:32:16 PM |
|
Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?
Instead if i use just rx 480 it do use claymore.
Difference is claymore with nvidia 6x 1060 mining at 138 With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?
in Nicehash, you can deselect the algo you don't want to use If you want only Claymore and no algo switching, just deselect all the others or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do. Thanks for the reply... Yes i know i can deselect algorithms... but even if i choice dagger hashimoto it always use ethmine... Anyway the best way probably is point it directly by the .bat file and use claymore... You think is more profitable nicehash (receiving bitcoin) than ethermine(getting ethereum)? unsure. im too lazy to check, my rigs are on autopilot with claymore at nicehash and runs for weeks with no intervention. i just like the fact that btc trickles into my wallet every week with no interaction on my part. i dual mine eth/sia with claymore. i do think btc has a better chance to rise long term than eth, so i stick with btc payouts. I dual mime eth+lbc more profitable....i tried all You are right about btc probably.. but you can monthly change eth into btc. I'll try to see the difference of profit
|
|
|
|
bobjones34
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 04:16:00 PM |
|
Hello, I am using Ethos and would like to run claymore with 6 gpu hope someone could point me in the right direction here (please !) You have to believe me here when i say that i have tried absolutley everything i have read here but i just cannot get 6 gpu working with this motherboard. With Claymore each gpu is at least 2 mh/s faster With ethminer i can run 5 stable(3 days) with both sgminer and claymore's the 6 gpu will start up and hash at 27 or so and the cut down to 4 after 1 or 2 minutes. With sgminer it also does me the courtesy of telling me that the 2 gpu are sick then dead. This can be with any card in any slot,it always changes. I think somehow that that is the important part ? All cards and risers work fine and have been checked in different slots,different risers,individually, in groups and any combination you can think of. All the info on here i can find i have followed. So that's 4 gpu with claymore and sgminer, and 5 with ethminer. This is my first build and i have really enjoyed it so far,im looking forward to making more hopefully. but i have now been banging my head against a brick wall for 2 weeks now(starting to make a mess) Anyway i hope someone here has a clue for me. Cheers
Provide more information about your setup: makes, models, versions, parameters, screenshots, troubleshooting steps taken... Sorry i forgot to post this bit: Operating system:Ethos mobo:Z170A GAMING PRO CARBON (MS-7A12) ram:4g Intel(R) Celeron(R) CPU G3900 @ 2.80GHz drive_name: KINGSTON SV300S37A120G GPU: 6x XFX rx480 8g one of which is the gtr black edition. PSU: Corsair hx1200i I have the same PSU, GPUs and CPU... Different MB and Win10. 6 cards in each rig. I have Z170 MB which I use for testing. If I have a spare time I might try to run 6 cards on it. If I were you I would try to seriously downvolt and downclock the cards, let us say half speed, to make sure that this is not related to current, voltage and temperature. If 6 runs with minimal speed than you can rule out drivers, OS, power and etc. I have seen comments that Z170A are the most problematic when it comes to 5+ cards. Have you tried another mobo? Thanks, i put them down to half speed and its been running for over a hour now at a stable 13 mh/s per card , What would you recommend next,slowly increase ? i dont have another motherboard to try. thanks for your help
|
|
|
|
supertux1
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 04:28:57 PM |
|
Rig: 6xRX480 Sapphire Nitro +OC 8GB, Windows 10. I use HWINFO64 to inspect the memory errors reported by each card, and so should you. The rig has been mostly stable 175-180Mh/s for the last six months or so using Jukebox v4.rom bios on most and vdrop+.rom on one. Recently I have had to lower the memory overclock and bump up the voltage 6.25mv on all my cards since Epoch #130. (WattTool -16 to -15) I think what is happening is we're using more of the RAM in the new epochs so the bleeding-edge overclock that was stable before no longer isn't. So since these changes we're stable again, but with 168Mh/s instead of 178Mh/s. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Gornidah
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 111
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 04:35:06 PM |
|
Hey!
Since Claymore dont have the option to OC or Control Fan's with Nvidia cards, how you guys do it in Linux (UBUNTU)?
Thanks!
|
|
|
|
rawbot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 05:33:40 PM |
|
please lower the dev fee.
This a thousand times.
|
|
|
|
Klexicon
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 05:39:56 PM |
|
I am running four 1060 3GB cards and ETH speed is as expected - about 20mh, but all the secondary coins have very low speeds. Total LBRY hashrate is just about 65, total DCR and SC are 750 each. Where is the problem.
I have the exact issue with my 1060 3G. Every card mines 20mh eth, and only 20mhs lbc when in dual. If I mine lbc by itself, it gets 180mhs. I did not have this issue with my AMD Cards. I've been searching and testing to solve this for a week now with no luck. Edit: I've tried on Windows 10 and Ununtu 16.04 with the same result
|
|
|
|
Gotumoot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 05:46:45 PM |
|
please lower the dev fee.
This a thousand times. We need some competition.
|
|
|
|
kirptc
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 06:03:03 PM |
|
Having any issue. Using Claymore dual miner v9.5
Yesterday I inadvertently restarted a machine that had been symptom free for more than 100 hours. After restart 4 of my GPUs were reading between 27-28 Mh/s and the 5th was just over 4 Mh/s. I disabled that miner, isolated it and ran it by itself. The card hashes ~27 Mh/s by itself. Plugged them in one by one and until I get to the 5th card everything runs normal.
I moved to another machine, different motherboard different cards and the same thing is happening to this machine now as well.
Can anyone offer an explanation?
|
|
|
|
bobjones34
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 06:23:40 PM |
|
Having any issue. Using Claymore dual miner v9.5
Yesterday I inadvertently restarted a machine that had been symptom free for more than 100 hours. After restart 4 of my GPUs were reading between 27-28 Mh/s and the 5th was just over 4 Mh/s. I disabled that miner, isolated it and ran it by itself. The card hashes ~27 Mh/s by itself. Plugged them in one by one and until I get to the 5th card everything runs normal.
I moved to another machine, different motherboard different cards and the same thing is happening to this machine now as well.
Can anyone offer an explanation?
Got the same thing here, I am currently trying to slowly increase clock speeds as all six will run together at around 13mh/s (rx480's) Not sure if this is a power issue,but i dont think so as i have corsair hx1200i and all the right parts. In the right place.I think...
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 06:38:22 PM |
|
Hello,
i did try to use -fanmin but it does not work. GPU use custom values (did fresh instal, did not yet installed trixx). Here is my .bat file:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu2.ethermine.org:4444 -ewal Wallet.Name -epsw x -mode 1 -ttli 78 -tstop 85 -fanmin 55 -mport MyPort -mpsw MyPW
For example, port settings does work fine same as password.
|
|
|
|
bobjones34
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 06:42:00 PM |
|
Rig: 6xRX480 Sapphire Nitro +OC 8GB, Windows 10. I use HWINFO64 to inspect the memory errors reported by each card, and so should you. The rig has been mostly stable 175-180Mh/s for the last six months or so using Jukebox v4.rom bios on most and vdrop+.rom on one. Recently I have had to lower the memory overclock and bump up the voltage 6.25mv on all my cards since Epoch #130. (WattTool -16 to -15) I think what is happening is we're using more of the RAM in the new epochs so the bleeding-edge overclock that was stable before no longer isn't. So since these changes we're stable again, but with 168Mh/s instead of 178Mh/s. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Yeah sounds about right
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2017, 07:03:06 PM |
|
I am running four 1060 3GB cards and ETH speed is as expected - about 20mh, but all the secondary coins have very low speeds. Total LBRY hashrate is just about 65, total DCR and SC are 750 each. Where is the problem.
I have the exact issue with my 1060 3G. Every card mines 20mh eth, and only 20mhs lbc when in dual. If I mine lbc by itself, it gets 180mhs. I did not have this issue with my AMD Cards. I've been searching and testing to solve this for a week now with no luck. Edit: I've tried on Windows 10 and Ununtu 16.04 with the same result no issues at all guys... ati is way too much better for mine dual coin without losing much hasharate inverse nvidia is not so good for this i have 12 gtx 1060 and i stopped to dual mine with them... no way too slow
|
|
|
|
|