nightrader
Newbie
Offline
Activity: 34
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 07:21:46 AM |
|
I started getting a strange unspecified launch failure error running ETH+SC.. It'll work for a few shares, then crash and restart. Does anyone know what's causing it? https://i.imgur.com/TPtdlpn.png
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 07:44:16 AM |
|
Anyone using the MSI Z170-A Pro for more than 4 GPUs?
I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.
I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.
Any ideas?
i dont like Windows for mining... but what psu do you have? are gpus on stock settings? I have that motherboard and i am mining with 6 gpu as well... I remember i had to update the bios to the last version and enable the 4g decoding I have to check when i go in the office for be sure. But it run 6 gpu very good
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 07:46:45 AM |
|
With LBC , I have a huge impact on ETH mining. For my 6 RX480 rig, I have :
ETH + SC : 179 + 2860 with dcri 16 ETH + LBC : 169 + 159 with dcri 14
Do you have the same results ?
Sia has different hashrate. It is normal
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 07:51:24 AM |
|
I started getting a strange unspecified launch failure error running ETH+SC.. It'll work for a few shares, then crash and restart. Does anyone know what's causing it? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FTPtdlpn.png&t=665&c=CLdvFQpvLcidBg) maybe a fiew more details... maybe too over/under clocked/under volted how many gpus? maybe faulty riser faulty gpu.... and so on... maybe only update the miner.... Happen to me too.. i don't remember how i resolved. Maybe is the -dcri problem. Try to put -dcri 16 or 14
|
|
|
|
lsszmeja
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 08:32:04 AM |
|
anyone have issues with nvidia card mining?
i have 2 titans n all i get is 2mhs lol 8x 1060s and i get the same 2mhs across all cards
using latest drivers, is there anything else i should be adding?
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 09:17:12 AM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs1.postimg.org%2F69eqyn3xn%2F20170623_111521.png&t=665&c=fvrNkK6h8zLZAA) Hi guys, why i get this hashrate? Up and down static it is normal?
|
|
|
|
nils8107
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 09:24:40 AM |
|
Anyone using the MSI Z170-A Pro for more than 4 GPUs?
I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.
I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.
Any ideas?
i dont like Windows for mining... but what psu do you have? are gpus on stock settings? I have that motherboard and i am mining with 6 gpu as well... I remember i had to update the bios to the last version and enable the 4g decoding I have to check when i go in the office for be sure. But it run 6 gpu very good I have the same Mainboard. I run 7GPUs GTX 1070 on that. Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfII have 4GB RAM, Windows 10 X64 I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT.
|
|
|
|
Provok
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 09:55:14 AM |
|
Claymore, can you add HMQ1725 algo to dual mode miner? Please! Coins with this algo looks perspective, I want to mine it with Ethereum.
|
|
|
|
Gunna01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 10:19:09 AM |
|
Anyone else have an issue when switching into or out of dev mining?
Happen twice to me now where the miner hangs at entering or exiting dev mining? I'm only alerted due to the pool emailing me.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 12:16:30 PM Last edit: June 23, 2017, 12:30:54 PM by Claymore |
|
Something I really dislike about your miner Claymore is the fact that if I'm dual mining ETC, when DevFee starts I lose another 30-40 seconds because it needs to swap to a different DAG and then after DevFee ends it changes again to a different DAG (132 on ETC 130 on ETH). I really, really dislike it about your miner. Just set an ETC pool for your devfee if mining ETC for christ sake, I understand you do a good job with your miners (you also make an awful lot of money, but it's cool anyway, it's deserved), but that's a long way from 1-2%, it's much closer to around 5% of lost hashrate each our with this dag swapping.
You can use pools that accept wallet address directly and remove "-allpools 1" option. Hi Claymore, Because of the AMD init bug (where cards are not initiated sequentially) the current miner version (9.5) is unable to know which card is which. After looking at HWiNFO I noticed that each card has a DeviceInstanceId which doesn't change when I reboot my machine. Why can't I use that to target a OC on that card? Right now every time my machine reboot I have to manually OC each card (Kinda annoying). Doesn't sound like an easy implementation but it doesn't hurt to ask ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Miner cannot read DeviceInstanceId via OpenCL. But recently I finally found a way to match the OpenCL list of GPUs and the list of GPUs that is used in ADL for temperature/fans/OC management, it must help, I will try to put it in next update. Also now I can enumerate GPUs as AfterBurner does.
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:19:26 PM |
|
Hi All i have a problem... i have asus rx 480 8gb (i think this is not the problem:) the problem is... asrock btc pro... 28.2mh 110W "older" lenovo mobo 28.2mh 110w but... asrock fatal1ty h270 27.1mh 110W same gpu, on all 3 mobo... why on fatal1ty 1mh lower? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) any ideas... thank you bios is up to date. noone has any idea? noone similar problem??? boded bios update... same card now.... 29.5mh 115w on btc pro on asrock fatality h270 28.4mh why ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) 1MH/s lol, you probably have the monitor plugged into that card.
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:38:56 PM |
|
Anyone using the MSI Z170-A Pro for more than 4 GPUs?
I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.
I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.
Any ideas?
i dont like Windows for mining... but what psu do you have? are gpus on stock settings? I have that motherboard and i am mining with 6 gpu as well... I remember i had to update the bios to the last version and enable the 4g decoding I have to check when i go in the office for be sure. But it run 6 gpu very good I have the same Mainboard. I run 7GPUs GTX 1070 on that. Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfII have 4GB RAM, Windows 10 X64 I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT. Oh yes i forgot you have to transform windows 10 in uefi mode gpt. If you have difficulty in this you can use aoemi partition assistant it will transform your mbr into gpt in 3 seconds without struggling.... I had to transform gpt hard drive and boot for all my rigs otherwise you won't be able to use more than 4 gpu
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:40:57 PM |
|
Something I really dislike about your miner Claymore is the fact that if I'm dual mining ETC, when DevFee starts I lose another 30-40 seconds because it needs to swap to a different DAG and then after DevFee ends it changes again to a different DAG (132 on ETC 130 on ETH). I really, really dislike it about your miner. Just set an ETC pool for your devfee if mining ETC for christ sake, I understand you do a good job with your miners (you also make an awful lot of money, but it's cool anyway, it's deserved), but that's a long way from 1-2%, it's much closer to around 5% of lost hashrate each our with this dag swapping.
You can use pools that accept wallet address directly and remove "-allpools 1" option. Hi Claymore, Because of the AMD init bug (where cards are not initiated sequentially) the current miner version (9.5) is unable to know which card is which. After looking at HWiNFO I noticed that each card has a DeviceInstanceId which doesn't change when I reboot my machine. Why can't I use that to target a OC on that card? Right now every time my machine reboot I have to manually OC each card (Kinda annoying). Doesn't sound like an easy implementation but it doesn't hurt to ask ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Miner cannot read DeviceInstanceId via OpenCL. But recently I finally found a way to match the OpenCL list of GPUs and the list of GPUs that is used in ADL for temperature/fans/OC management, it must help, I will try to put it in next update. Also now I can enumerate GPUs as AfterBurner does. Which is the way for?
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 01:42:17 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs1.postimg.org%2F69eqyn3xn%2F20170623_111521.png&t=665&c=fvrNkK6h8zLZAA) Hi guys, why i get this hashrate? Up and down static it is normal? Someone knows this problem?☝
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 02:29:19 PM |
|
Well share how did you fix it, god damn! If you ask on board, than share also!
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 02:56:58 PM |
|
Well share how did you fix it, god damn! If you ask on board, than share also!
I 200% agree
|
|
|
|
coinzoid
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 03:58:06 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs1.postimg.org%2F69eqyn3xn%2F20170623_111521.png&t=665&c=fvrNkK6h8zLZAA) Hi guys, why i get this hashrate? Up and down static it is normal? Someone knows this problem?☝ Could be GPU overclock/voltage issue, could be internet connection issue. But IMO you may need to discover which card gives memory errors and try to fix it. Then you will get better results.
|
|
|
|
juvx
Newbie
Offline
Activity: 38
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 04:10:06 PM |
|
Hi sorry im new to dual mining.
I just ran my single 1080ti on Eth + LBry and the eth does well about 37 MH (which is my normal Hashrate) but the LBry is really low like only 34 MH.. is this normal for performance to be this low? I normally get 513MH when mining just LBRY. Also, the card doesnt seem like it's running at full potential its only running at like 64 C which is nice, but i feel like a lot more LBRY should be squized out of it.
Any ideas or suggestions? could it be my version of windows (enterprise) or maybe the new nvda drivers?
should i choose a differant 2nd currency with the 1080ti?
Or is it normal to loose that much HS because im mining two and im just being greedy LOL
btw just doing testing atm.. my main rig is 7x1070s and have one with 3x 1080TIs... currently just running NICEHASH on everything.
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 04:50:02 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs1.postimg.org%2F69eqyn3xn%2F20170623_111521.png&t=665&c=fvrNkK6h8zLZAA) Hi guys, why i get this hashrate? Up and down static it is normal? Someone knows this problem?☝ Could be GPU overclock/voltage issue, could be internet connection issue. But IMO you may need to discover which card gives memory errors and try to fix it. Then you will get better results. The problem is claymore don't give me any error. So wjat could be? Internet? I am using sim card with smartphone hotspot wifi i still don't have adsl in the office
|
|
|
|
preda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2017, 04:51:31 PM |
|
Hi sorry im new to dual mining.
I just ran my single 1080ti on Eth + LBry and the eth does well about 37 MH (which is my normal Hashrate) but the LBry is really low like only 34 MH.. is this normal for performance to be this low? I normally get 513MH when mining just LBRY. Also, the card doesnt seem like it's running at full potential its only running at like 64 C which is nice, but i feel like a lot more LBRY should be squized out of it.
Any ideas or suggestions? could it be my version of windows (enterprise) or maybe the new nvda drivers?
should i choose a differant 2nd currency with the 1080ti?
Or is it normal to loose that much HS because im mining two and im just being greedy LOL
btw just doing testing atm.. my main rig is 7x1070s and have one with 3x 1080TIs... currently just running NICEHASH on everything.
Yes lbc is the same like eth Sia coin is different and all second coins too... Lbc is the more profitable and the more expensive in power
|
|
|
|
|